HTC Wildfire S Marvel NO SERVICE issue.
has
UNLOCKED Boot loader,
S-OFF
radio is 2.26.771...
Clockworkmod recovery installed.
nandroid of stockrom is safe and backed up.
currently Wildfire s is running ICS.
Problem:
This problem occurs on both on stock with locked and unlocked bootloadder and on custom ROM,
Only VODAFONE UK network works i can make and receive calls.
T-mobile uk cannot make calls when i try to call ends BUT 3G WORKS FINE.
ORNAGE UK = NO SERVICE 2g/3g does not work.
GIFFGAFF = NO SERVICE 2g/3g does not work.
3 = NO SERVICE 2g/3g does not work.
What could be the problem?
can anyone please help!
thanks,
p.s. i already have bought network unlock code which i cannot enter when i try with unsupported sim.
Hey guys I'm hoping i'm not screwed but flashed a custom rom x3reme Sense v5 & OTA and when i rebooted now my Mobile Network connection keeps flashing to disconnected. Unfortunately when i flash back to my backup i still exhibit the same issues. I tried contacting US Cellular to see if they could do something w/ the connection but they don't see an issue on their end.
I believe i have the old radio and the rom may have only been for the OTA update. I am trying to find a RUU to get back to stock hoping that will fix it. I have tried 3 different RUU's for the PrimoC but keep getting either Model ID error or customer ID error. Does anyone know where i can find a RUU for US Cellular. Everything i find for the One V seems to be for Virgin Mobile (i'm a noob so they maybe compatible) but nothing for US Cellular.
HTC One V CDMA
US Cellular
Radio: 1.00.00.0524_2
HBoot: 1.56.000
So my phone is unable to get any 4g signal
2g/3g works fine
tried with multiple sim and locations
I guess i need to flash a new modem for this to work
My phone is s-ON
HAS super CID -11111
Is bootloader unlocked
Has custom rom
Can someone provide a radio for this preferably the international variant
I've bought second hand m9 , this last was flashed and rooted because I found supersu integrated with it, the problem is some settings are missing comparing with regular m9 like mobile network sharing for example, is there a way to fix the problem?
First of all, never use a second hand device without reinstalling the whole OS. I factory resetted my M9 right after buying it. (And rooted it, etc...)
Just look at you CID and MID and find the latest RUU for your phone and install it.
Maybe the person that had it before removed the certain settings, because the HTC settings app is quite modular from what i've seen. The settings app is split into many apps. Probably when debloating it he accidentally deleted that. (For example, if you install HTC's chinese performance management tool, a new setting will pop up in the settings app. Same with Sense Toolbox)
Or if is already rooted, just install S-Team ROM (sun_dream's ROM).
where can i find cid mid numbers?
and what is the best rom should i install?
leo-pard said:
where can i find cid mid numbers?
and what is the best rom should i install?
Click to expand...
Click to collapse
I suggest you first install stock rom.
I have been searching for a while for how to update the rom image
I checked my phone and I found the following information:
***unlocked***
htc_himawhl pvt s-off
cid-11111111
os-3.41.651.4
feb 3 2016
I believe that my phone was for developers, so I downloaded devRUU "HTC One M9 4.30.617.12" from HTC website and I tried to install it but I got error 132 (get the correct RUU...)
I switched to another RUU "HTC One M9 4.27.651.4", but I got the same error error 132
I've tried to get my CID and MID numbers using CMD but I've got nothing, it shows me:
CID:
MID:
nothing, blank, no information. after some research I realized that it was CID free "unlocked"
the main question is, how can I upgrade my system to get my full setting options? I appreciate your help
Forget whatever you read. It's wrong and you should thank whichever god you believe in that the dev edition RUU didn't get flashed.
First of all, you own the Sprint version (SKU 651) which is a CDMA device. The dev edition RUU (SKU 617) is meant to be used on GSM devices only. Those are two completely different technologies used by different US network carriers. Flashing GSM files on CDMA devices or vice versa leads to unrecoverable hardware damages in most cases since those versions have different partition layouts. It's not even safe to flash Verizon (another CDMA carrier) files on a Sprint device or vice versa since even these models use different layouts.
Second, there is no such thing as an HTC phone without CID. The dev/"unlocked" version has CID BS_US002. If the app doesn't give you any info then it's not working. In addition, it's recommended to use the current firmware version for finding the correct RUU instead of MID and CID. With the latter you still need to guess a lot whereas the former gives you the exact version of the RUU that is flashable.
Btw, you should get rid of the SuperCID your phone is currently using (11111111) since it causes more problems than benefit.
You'll never be able to flash a 4.x RUU on a phone that uses firmware 3.x. The encryption keys changed between those two firmware versions. You'll need to update the phone by using unencrypted files (OTAs or - if you have S-OFF - custom made 4.x firmware packs). You should have S-OFF since getting the SCID is impossible without it (the same applies to getting rid of it). However, Sneakyghost doesn't support CDMA devices so I don't know whether there are any custom firmware packs you could use.
If I were you I'd take the time to carefully read the ReadMe thread and to make sure that I understand everthing. Then I'd use the conversion guide for getting rid of the SCID (you can ignore the warnings if you use a RUU for your current SKU 651). Afterwards, that phone should be able to receive 4.x OTAs so that it can get updated to the latest firmware.
Sidenote in regard to the original question with the missing settings: I could be wrong but if I'm not mistaken then it's completely normal that Sprint models lack the network sharing option since that carrier doesn't allow it and therefore asked HTC to remove that option.
what a wonderful explanation, it's all clear, thanks a lot!
one more question,
how do i know for sure that my M9 is CDMA and has not been only changed to sprint rom version ?
I've googled for the differences between CDMA and GSM, I found that CDMA network basically depends on the device itself, whereas the GSM network depends on the SIM card. However the Sprint HTC One M9 had a nano sim slot in it in order to connect to GSM 3G and 4G bands, which were not devloped yet in CDMA networks. if this is right, could I still use my GSM network through 3g or 4g?
Since LTE is a GSM-only technology there are not many "pure" CDMA devices, anymore. Nowadays, all CDMA phones support Sim cards and some GSM frequencies. However, that doesn't mean that you can get reception with every GSM carrier if you own a CDMA phone since different carriers use different frequencies. In addition, one and the same carrier might even be using different frequencies for its network depending on the location. You'll have to try out whether you can get mobile reception with your current carrier and that phone.
Assuming that no one tinkered with the hardware of that phone, you can find out its original MID by taking a look at the engraving on the bottom of the back side (c.f. the FAQ of the ReadMe thread).
Sent from my HTC One M9 using XDA Labs
It's written :
Model:0PJA120 FCC ID:NM80PJA120 M9u
2200
actually the phone can read my gsm sim card, I have no problem with that except I want to make sure if it is CDMA version or not
I've looked everywhere in the internet but I didn't find a direct answers
Mhm... That MID belongs to the T-Mobile US (GSM) model. But your firmware is a CDMA one. The question is whether your phone still has its original backplate or not. Normally, cross-flashing GSM and CDMA will make the phone failing to recognize sim cards.
You could contact HTC and ask them whether they can tell you what kind of M9 you own with the help of its IMEI.
Sent from my HTC One M9 using XDA Labs
yes it does recognize my sim card
thank you very much for your help:good:
I'll try to contact htc to solve this contradiction
I'm facing same problem....
Dear Leo-pard,
could you please help me out....is your problem solved after chatting with HTC Customer care..
I'm facing same problem as my HTC M9 is also not showing Mobile Network Sharing Option....
Please help me out also....
I'll be waiting for your reply...
A lot of carriers charge extra for hotspotting. More than likely mobile network sharing will be off because the carrier wants you to pay for it. What I don't know is if it is coded into the firmware or not.
Hey @Flippy498
I have a sitting HTC m9 and like you said have missing mobile network sharing settings. My phone is s off with locked bootloader.
What can I do to use USB tethering it mobile hotspot? Can I use a third party app to use them?
Thanks
Hi guys, after buying HTC 10 I ran into a problem: the phone does not want to work in cdma networks. only gsm. in mode * 4636 # cdma is not selected, permanently resets to gsm (the sim card is visible).
I tried different firmware, including for America,but this not help me.
at the moment it costs leedroid 5, android 8, s-on, cid htc_002 (eu)
very much I ask help
did you resolve this?