Preface- I was contacted to review this Apple watch dock out of the blue. I was not searching or reaching out to anyone. They provided me with the product in exchange for a review. My nature is to give a honest review, I want to help others. My opinion and this review is subjective to only help you.
Packaging- I received the watch via Amazon, it came in a white box with no real markings, details about the product inside. I opened the package and was greeted with some soft protective foam on the top. There were no instructions inside the box. This is a con because I was a little confused how it went together and had to revert to Amazon and the pictures showing the product.
Build/Quality- The overall stand/dock is sturdy. The majority of the stand is made out of clear acrylic. The underside and middle is a white plastic. The top layer is a 5mm or so removable piece of aluminum. The sides of the aluminum and center cutout for the Apple charger are chamfered and polished silver. The piece of aluminum resembles what a Mac feels like. Though a negative was the aluminum is quite soft. Upon taking it off I felt it bent slightly as attaching it back on did not fit the same.The aluminum clips onto both ends of the rainbow arch.
The overall size is a bit bigger than expected. One negative I found was the weight. It’s weight is comparable to a modern cell phone. The bottom of the stand has silicone feet, BUT they are not grippy at all. I’m able to slide the stand easily across any surface just by tapping it. More grippy feet and more mass would make it more stationary.
Below the aluminum hides a channel the charging wire feeds through and a hole cutout for the magnetic charger to sit in. Under the charger sits on a silicone pad to keep things snug. A channel is cut out of the aluminum and plastic for the cable to feet out of for the dock to sit flat on a surface.
Other remarks- The Apple watch band that is a milanese loop. The issue with this compared to other bands is the loop never opens. It stays closed in a loop help by a magnet. In order for the watch to be placed onto this dock you must lift up the dock and slide the watch over. A normal sport band, leather or nylon band you can just unclasp and lay the watch on it. With those bands you have two options on how to lay the watch: with the straps laying over the top of the aluminum or the straps dangling in between.
Another neat feature that I would have liked to see would be faint LED lighting inside to create a glow effect that can be turned on or off. Since it is being advertised as a “rainbow” stand, a rainbow effect would have been a nice touch considering the acrylic.
Pros:
Good build quality
Cheaper compared to other docks
Unique design
Nice aluminum feel
Cons:
Silicone pads are not grippy
No instructions
Aluminum is pliable
Inconvenient to use with Milanese loop or link bracelet
If you have any questions feel free to ask and I’ll do my best to answer them.
Related
So I purchased this case off ebay- its from a korean store. Not much regarding the store or the company the case is made by: Neim
I was looking for a high quality, nice looking with features to set it apart but also to protect the phone.
It is made out of genuine leather, dark navy blue and yellow accent latch (which is magnetic) and yellow CC/license (3) holder inside, which allows you to hold cash. There are 2 cut outs for camera/led flash and speaker.
The interior is lined in felt. The case portion where the phone sits in is plastic but that rubbery smooth texture. The top and bottom (on sides) are what clips the phone to stay in. I wish the top corners were covered like the bottom is. All buttons and ports are easily accessible. The phone though is very tightly secured.
The case can be opened and used as a stand in landscape. its quite sturdy and stays in place.
An added bonus which I liked was the included matte finish screen protector. It was easy to apply. I like it cause there are little/no finger prints.
Overall I like the case. It does add bulk to the phone, which I dont mind.
2 pictures uploaded. Will take HD pictures and video when i have some time
Looks pretty neat.
When you have one of the smartest smartphones at your disposal, you obviously want to make sure that you have the smartest protection out there. The rugged OtterBox Defender Case safeguards the thin and light body of your Samsung GALAXY Note from damages under virtually , any circumstances for the ultimate protection solution!
DESIGN AND FEEL:
Full access to all the Samsung Galaxy Note’s buttons and features through the case, including camera, flash and stylus opening.
Silicone plugs provide full coverage of volume controls, headphone jack, micro USB opening, power button and charging port.
Two-layers of protection include a sturdy polycarbonate inner layer and rugged silicone outer layer.
Inner polycarbonate layer includes a built-in screen protector and inner foam liner.
Outer silicone layer features a grooved texture on the side for enhanced grip.
BUILD QUALITY AND LAYERS OF PROTECTION
Screen Protection: Built-in screen protector prevents scratches, scuffs and smudges while retaining the sensitivity of the Note’s touchscreen.
Inner Layer: Two-piece polycarbonate snaps together around the Galaxy Note creating a solid shelter. The
inside of the polycarbonate includes a foam inner liner to cushion the Note against oopsies such as bumps,shocks and drops.
Outer Layer: Rugged silicone wraps around the inner polycarbonate layer. The sides of the silicone outer layer feature a grooved texture for enhanced grip.
Holster: Rotating belt clip securely fastens to almost anything and also doubles as a media viewing stand when locked into place. You can face the touchscreen out for use or face it in for maximum protection.
ACCESSIBILITY AND STYLE :
The case is classic black in color, which some people may find boring, where as I just love the simple bold look, it looks very sturdy and strong. It does add some bulk to the phone but for me it wasn’t a deal breaker.The Earpiece,Sensors and front facing Camera are protected with hard plastic edges which are very classy and look stunning.The Volume keys are also fully protected ,as is the Power key on the right side..
At the top , the noise cancelling mic is open and the Headphone jack covered by a small pull-able cover, what is great about this is there is a very hard plastic edge around the Jack port.As with the Top the Bottom is also well protected namely the Micro USB Charging port. The S-Pen is fully open giving great ease of use when pulling out the S-Pen. There is separate openings for Microphone and rear speaker.
One word to describe this case would be: DEFENDER!
"Conclusion"
My overall experience with Otterbox Defender series has been great. This is the Best Protective Case for Galaxy Note as no other case provides this Premium look, Awesome feel, and the Amazing protection that Otterbox provides.
Price :
It is priced at $59.99 on www.otterbox.com
For Images and More info , Visit : www.theandroidcop.com/review-otterbox-defender-case-for-samsung-galaxy-note/
I was fortunate enough to find this case lying around the workplace.
The boss-man said I could have it!
Saved myself $60!
Ouch... feels like having 2 notes inside my pocket, lack of close-up pictures in details
Too bulky for a already large phone... and too expensive.. there is better protection for less out there... IMHO
Sent from my GT-N7000 using XDA Premium HD app
Yes its big, but I'd worked out what size it would be before buying the phone or case. Get a ruler, make a cardboard mock up.
I actually had the case before the phone and it went straight into it on arrival. Working outdoors a lot and having had old candy bar type phones often take a tumble to the ground, I wanted my new phone properly protected.
Having used the phone and case for 6 months, its only tumbled out of pocket once, when not actually clipped in. I typically use the hard beltclip cover, in top pocket of work shirt, with the clip opened over the shirt button. This prevents it riding deeper in the pocket, but the button provides something for the clip to grab, so if during contortions outside, the phone flips out of pocket, it remains clipped to the pocket. Additionally when using the belt clip cover, the silicon shell faces the body, so it seems very unlikely perspiration would find its way into the phone, which seems to be an issue with some phones and their usb/headphone ports (covered with defender)
It seems it would also be quite secure if deeper in the pocket without the belt clip cover, the silicon case grabs the pocket well, although in this position the button is exposed to body moisture (if theres no stock seal around that)
What I did NOT like about the case was the built in screen protector, like all matte finish protectors I have seen, it blurs the pixels giving a fuzzy effect to the display.
I carefully removed the built in protector, pushing around with thumb in warm weather worked, and replaced it with a Spigen glas.t, tempered glass protector. The glas.t is about 0.5mm thick, there is room for it within the defender case. I suspect the tempered glass/silicon adhesive would do a good job of spreading the energy from a sharp impact, performing much like a laminated car windscreen which tend to keep most impact chips in the outer glass layer.
I have the full protection of the defender case, and full visual clarity of the screen. Win/Win
I also do not have to worry about the possibility of dust, grit etc working its way into the case and being held against the screen. This may not happen, I didn't leave it original long enough, but certainly seemed it would be likely in the environments I work in.
Hope this helps someone
Its big, bulky, but is worth it! Own one myself. Its worth the tradeoff for protection of an expensive toy
Well i have this case for over 2 months and i can say that its trully worth the money! The extra protection is awesome as well is the design and grip! However it has 2 downsides IMHO.
1st you have to open it and clean it once per 15 days and believe me at first it's a pain in the ass to open it and you re gonna break some nails .
2nd some areas far on the top on the screen need to be pressed harder i.e. it takes some time to get used to taking down the Notification Center the first days.
Hope this helps!
Hope people do realise that the metal band is really just plastic with a (cheap) metal strap.
Knowing this, I guess it's probably smarter to just buy one of these adapters and find some quality 24mm bands you can fit yourself. I too was searching for Sony's metal band, but after seeing that the part that holds the screen is just made out of painted plastic, I'm glad I didn't buy one yet. It saved me from being very disappointed...
Sorry but this is not true. An element with which you write, that it is made of plastic, rubber and metal. The rubber is combined with plastic (directly to the metal it can not be combined). Rubber is used to close the core mounting in the cover. Then the cover is protected on both sides of the metal finish.
I saw the 3D printed models in another thread, they are a really poor quality and awful fit and finish, unless they've improved since I last looked at them.
Still the metal band is almost impossible to get hold of anyway, but genuine adapters have started to pop up on eBay
Sent from my P9000 using Tapatalk
The metal tape is very heavy and looks good.
But the part that holds the screen is painted.
I have a small scratch in it, because I didn't know it.
I use the metal tape only to special occasions.
I recently recieved my second SPECK CandyShell Clear for my HTC 10 (I broke the first one by trying to mod it but that's a different story), so I took the chance to take some photos and give you a short review. Disclaimer: This review is neither sponsored, nor did I recieve any discount in order to write this review.
Pricing
I paid ~30 USDs at an online Android accessories retailer (used some available-to-all coupon that reduced the price by ~5 USDs).
The price is pretty hefty when compared to other HTC 10 cases except the original ice view ones.
Retail box
This case comes in the standard SPECK retail box, which looks nice IMHO and is very easy to open.
Build quality / Durability / Looks
Although it is made of plastic, this case definitely screams premium. The way it shimmers and feels in hand sets it apart from its competition.
Unlike the (now retired) Gem Shell I had for my One M9 and similar to the original CandyShells, this one has a two-layered construction: The outer layer is sturdy plastic while the inner one is soft rubber. Both layers are completely transparent (although the rubber has a very slight frozen look only notably when the case is not yet put on the phone).
SPECK promises that this case would resist UV yellowing and I can mostly confirm this: My first CandyShell Clear did not yellow for two month except the buttons. The buttons did yellow indeed but this did not affect the overall looks too much since the rest of the case stayed perfectly clear.
I had some CandyShell/GemShell/CandyShell Grip cases before and one of the very few downsides is that they were quite prone to scratches and looked worn after a couple of days. I was really astonished to see that SPECK made some serious improvements here: The first case had very few scratches after two month, none of 'em were obvious. No comparison to the elder cases where the gloss disappeared quickly due to the surface being covered by scratches all-over.
One nice detail is the SPECK logo. It is placed quite nicely to complement the HTC logo and not to interfere with it. But what it really makes it a stunner is how it is done. It is embossed in the rubber layer of the case in such way. that it appears to be embossed in the metal body of the phone. Nice idea, SPECK!
The only downside in this department is that this case adds some bulk. Not too much and nothing like UAG-like cases, but those who like their device as slim as possible might find it too bulky.
Protection
Protection is where this case really shines. The sturdy outer shell combined with the cushioning inner rubber layer keeps you covered in most drop situations. The front-side lip does not only protect the screen when putting it face to the table but is also thick enough to protect the screen while dropping on almost flat surfaces.
Fitting / Cutouts
This case sits like a glove. It is manufactured to fit the contours of the 10 like a perfect ten (pun intended). All cutouts are surrounded by rubber that will keep dust out of the case.
The small cutouts for the bottom-side and back-side microphone fit perfectly. The headphone jack cutout is big enough so that most headphones should fit into it. The camera cutout is quite big but this way, the flash should not interfere with the case (although I have not tested this). The bottom speaker cutout fits also well, same goes for the USB port cutout.
But the USB port cutout may be the biggest downside of this case: It is so tight that some cables won't fit. The original HTC charger cable, which comes with the 10 does. But my 3rd party cables with metal plugs did not fit and so won't any cables whose plugs are significantly bulkier than the rather slim plug of the original cable.
Remember that I told you, it was a different story that this is already my second CandyShell Clear? I broke the first one while extending the USB port cutout with a drill. Unfortunately, I did not spend enough attention and damaged the inner rubber layer which looked pretty ugly. So I replaced the damaged case with this new one and also replaced my cables with ones that provide slicker plugs. Quite some hassle but this case is definetly worth it.
In case you wonder which cables I was talking about: Aukey CB-CMD5 (pack of 5) will fit while Aukey CB-CMD2 (pack of 5) won't.
Liked this review? Do not forget to push the "thx" button!
Does the tpu on the front fit properly? The lip would get pushed in and down when I put the phone one and I couldn't get it to actually be a lip on the screen. I sent mine back. On the bright side speck has a very easy return process.
if you take a picture with the flash on, does the light bleed through the case?
aer0zer0 said:
if you take a picture with the flash on, does the light bleed through the case?
Click to expand...
Click to collapse
At least the flashlight does. Have not yet checked whether this affects photos. I'd assume so but I remember having read otherwise somewhere. As soon as I tested it, I will let you know.
TotallyAnxious said:
Does the tpu on the front fit properly? The lip would get pushed in and down when I put the phone one and I couldn't get it to actually be a lip on the screen. I sent mine back. On the bright side speck has a very easy return process.
Click to expand...
Click to collapse
This case is a tight fit indeed. It took me some patience to get the phone in while keeping the lid in place. Once the phone is in, it takes some force to remove it. Great for being sure that the phone won't slide out accidentally on drops. Not so great if you want to remove your phone frequently.
After seeing no choices for a regular bumper style case with a pen holder, I decided to get creative and made one for myself. I used this Poetic Turtle Skin case (I have it on all the tables in my house). Then I got these pen holder tabs.
Using an exacto knife I made a tiny cut in the top edge of the case, just barely long enough to equal the width of the pen holder loop. I had to do it slowly and repeatedly cut away until I made it through the thick rubbery material. I think this case will work the best for this because of the durable rubber material should continue to split. Then I pushed the loop through on the inside. I didn't try to adhere the inside tape to the case because the tablet will hold the tab in place, plus the snug fit of the loop through the rubber is pretty tight.
It's been working well and holding up great for me for the past 2 months. I've included some pictures so you can see what it looks like.
Hope this helps someone else out.
How does the tablet sit in the case with the mod? I tried the same thing with a more slim fit case and it prevented the edges of the case from covering the tablet at that spot due to the thickness of the sticky pad.
irieblue said:
How does the tablet sit in the case with the mod? I tried the same thing with a more slim fit case and it prevented the edges of the case from covering the tablet at that spot due to the thickness of the sticky pad.
Click to expand...
Click to collapse
It has worked out very well and there's no chance it will come out. There is a slight bump along the top edge but it's really negligible and doesn't bother me or my use of the tablet. It still covers the entire device and protects the edges.
Ok see
thats a nifty pen holder