Develop Bugs

[GUIDE] Flashing Guide / SP Flash Tool Guide | CANVAS 4 | REV(ive) IT UP!

What is SP Flash Tool?​It is MediaTek's answer to low level flashing OEM softwares like ODIN, Androxyde Flashtool, etc.
Such softwares can be used to backup and restore every piece of software on your MTK NAND Chips...
These softwares can thus can almost revive your phone from the dead or fix many problems or flash ROMs or kernels, etc.​SP Flash Tool Guide​Features:
Revives your phone from almost any brick!
Fixes the WiFi and Bluetooth (only software problem), created due to some wrong permissions.
Flash CWM Recovery
Flash Custom ROMs
Root your device without a root exploit.
Flash Stock Firmwares.
Flash Custom ROMs
Requirements (click on softwares below to download):
SP Flash Tool
Micromax Canvas 4/HD Drivers (NEW!) (Windows 8.1/8/7/Vista 64-bit) [NEED TO DISABLE DRIVER SIGNATURE ENFORCEMENT] ||| Others (for 32bit Windows)
Micromax Canvas
Micro USB Cable
Windows PC/Laptop
Procedure (for flashing Firmwares):
Download all (software) requirements to a folder
Download the files/folder to be flashed to a folder ( Here is the Stock ROM for Canvas 4: http://www.tusfiles.net/agbdwr69sc8s )
Extract it to a folder (this is the extracted firmware for this guide)
Install drivers & extract SP Flash Tool to a folder
Open Flash_tool.exe
Click Scatter-loading
Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted firmware
Click Download button or press F9
Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
Restart phone and Done!
To be added:
Screenshots.

CWM Recovery Flashing (through SP Flash Tool) (for Canvas 4)
and Rooting without root exploit by flashing root file through CWM Recovery
​​
Procedure (for flashing CWM Recovery):
Download all (software) requirements to a folder
Download CWM Recovery for Canvas 4 (Click here)
Extract it to a folder (this is the extracted firmware for this guide)
Install drivers & extract SP Flash Tool to a folder
Open Flash_tool.exe
Click Scatter-loading
Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted CWM Recovery
Click Download button or press F9
Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
Restart phone and Done!
Procedure (for rooting without root exploit):
Download root file and copy it to SDCard (without extracting!)
Boot to CWM Recovery ( Steps: )
Shutdown phone
Press Volume Up+Volume Down (together)
Navigate to the Recovery option and press Volume Down
Go to install zip from sdcard
Select SuperUser zip
Reboot and Done!
Why root without root exploit?
Always works without fuss
No PC required once setup
Secure and Safer

He is right !!!!!! It should be in general section

how to take backup using cwm 6.0.4.8

HELP
i was flasing stock rom v3 but mistakenly usb cord was dissconected now my phone is not responding and not recognized by my pc

Yash98 said:
What is SP Flash Tool?​It is MediaTek's answer to low level flashing OEM softwares like ODIN, Androxyde Flashtool, etc.
Such softwares can be used to backup and restore every piece of software on your MTK NAND Chips...
These softwares can thus can almost revive your phone from the dead or fix many problems or flash ROMs or kernels, etc.​SP Flash Tool Guide​Features:
Revives your phone from almost any brick!
Fixes the WiFi and Bluetooth (only software problem), created due to some wrong permissions.
Flash CWM Recovery
Flash Custom ROMs
Root your device without a root exploit.
Flash Stock Firmwares.
Flash Custom ROMs
Requirements (click on softwares below to download):
SP Flash Tool
Micromax Canvas 4/HD Drivers (NEW!) (Windows 8.1/8/7/Vista 64-bit) [NEED TO DISABLE DRIVER SIGNATURE ENFORCEMENT] ||| Others (for 32bit Windows)
Micromax Canvas
Micro USB Cable
Windows PC/Laptop
Procedure (for flashing Firmwares):
Download all (software) requirements to a folder
Download the files/folder to be flashed to a folder ( Here is the Stock ROM for Canvas 4: Mod edit: Link removed)
Extract it to a folder (this is the extracted firmware for this guide)
Install drivers & extract SP Flash Tool to a folder
Open Flash_tool.exe
Click Scatter-loading
Select MT6589_Android_scatter_emmc.txt (for Canvas 4) found in extracted firmware
Click Download button or press F9
Shutdown your Canvas 4 and connect it with Micro USB to PC running the Flash Tool
See it flashing before your eyes and wait for a green circle to show up on your PC to indicate successful flashing.
Restart phone and Done!
To be added:
Screenshots.
Click to expand...
Click to collapse
hi, i flashed my rom as you said, it was succesful, but one big bug is there after flashing my C4 IMEI numbers become invalid. some how i find solution for it in XDA and i used *#*#3646633#*#* and i i done IMEI problem,, and the main problem is i am staying in bangalore, i have 2 sims both are 3G supported and i used those 3G in my C4 before flashing,," NOW IF I ENABLE WCDMA only MODE NETWORK SOWS NO SERVICE", I Tryed in both sims but no results.. if i use same sims in my other android its working good in WCDMA Mode..AND MAIN POINT IS I USED SAME SIM IN THIS SAME MOBILE YESTERDAY ONLY BEFORE FLASING ON WCDMA MODE ... PLEASE FIND OUT SOME SOLUTION<>:<>><

not working
chejetikoti said:
hi, i flashed my rom as you said, it was succesful, but one big bug is there after flashing my C4 IMEI numbers become invalid. some how i find solution for it in XDA and i used *#*#3646633#*#* and i i done IMEI problem,, and the main problem is i am staying in bangalore, i have 2 sims both are 3G supported and i used those 3G in my C4 before flashing,," NOW IF I ENABLE WCDMA only MODE NETWORK SOWS NO SERVICE", I Tryed in both sims but no results.. if i use same sims in my other android its working good in WCDMA Mode..AND MAIN POINT IS I USED SAME SIM IN THIS SAME MOBILE YESTERDAY ONLY BEFORE FLASING ON WCDMA MODE ... PLEASE FIND OUT SOME SOLUTION<>:<>><
Click to expand...
Click to collapse
how much time it takes for flashinf, after following all your steps :confusedtool is stuck on the same think for almost 20 min, please help me and let me know what i can do

SP Tools link broken!
Unable to download SP Tools. Please help!

Seems i bricked it
I was earlier a user of this device and had tried several ROMs. Was experimenting with few custom ROM's on my friends device (Canvas 4)
After flashing a ROM (S5 ROM) posted on this forum, i was getting some errors in CWM:
can't mount /cache/recovery/log
and it refused to flash anymore ROM's.Left with no other option, i thought of flashing back the stock ROM and then rooting agn to flash a custom rom.
However, even the stock ROM didn't flash, i was getting an error
BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
I googled a bit and some forums suggested to format flash tp resolve this error. I did that and that worked and got a green circle with Format Ok.
Again, i tried flashing the stock ROM and now got a new error in SP Tools:
BROM ERROR: S_DL_PMT_ERR_NO_SPACE (5069)
I am stuck at this point and not able to flash the stock ROM. After loading the scatter file, only flashing of Preloader works. Remaining all is stuck.
Running a memory test on SP tools gives an error that
NAND FLASH WAS NOT DETECTED
Please help me out, i have spoiled my friends device and need to fix it ASAP.
The masters here, please help out - @shiv.guddadmath @kannanrs @gamerboy_010 @rishivg @FSadino @pranjal18 @NeroD @rahilj007 @Yash98 @jayadev01

@satsmagic,
I encountered this and if i remember right, this has been reported before. S5 Rom does spoil the recovery and it is repairable.
With SPTools, use the Firmware Upgrade option instead of the Download. This will set it right and try a stock rom first. I used Pranjal's ROM and it worked. Please try and report. Of course, you can flash any rom after that.
Greetings...

kannanrs said:
@satsmagic,
I encountered this and if i remember right, this has been reported before. S5 Rom does spoil the recovery and it is repairable.
With SPTools, use the Firmware Upgrade option instead of the Download. This will set it right and try a stock rom first. I used Pranjal's ROM and it worked. Please try and report. Of course, you can flash any rom after that.
Greetings...
Click to expand...
Click to collapse
@kannanrs thanks for replyiing back, i think i had tried that on stock ROM but i tried again using Pranjal's ROM, doesnt work :crying::crying:
Please see the error screen attached
seems m stuck badly and lost it:crying:
If i do download only, i get Error 5069 (S_DL_PMT_ERR_NO_SPACE)
the red and purple bars do complete 100% in both cases
And i used S5 ROM from the below link by @rishivg, it never said it breaks the recovery
http://forum.xda-developers.com/canvas-4/development/samsung-galaxy-s5-rom-a210-t3324837

@satsmagic
Almost all, that flashed the S5 rom released by me, encountered this problem, including me. But the rom bettered all expectations.
And only when we need to check another rom did we encounter this.
This happened to me at all times when i tested this rom for answering the questions then. Its now 4 months that my canvas4 died a graceful death and beyond repair. So I am unable to test and tell you. Rishi can dare to test and report this and probably drive a nail to end this problem for you, if he can afford to risk a bit and probably rubal and vikas who helped me when this happened. I will ask them to comment also....
Theres a thread in the A116 or A110 forum which i will share here soon...
Cheers!!!!

kannanrs said:
@satsmagic
Almost all, that flashed the S5 rom released by me, encountered this problem, including me. But the rom bettered all expectations.
And only when we need to check another rom did we encounter this.
This happened to me at all times when i tested this rom for answering the questions then. Its now 4 months that my canvas4 died a graceful death and beyond repair. So I am unable to test and tell you. Rishi can dare to test and report this and probably drive a nail to end this problem for you, if he can afford to risk a bit and probably rubal and vikas who helped me when this happened. I will ask them to comment also....
Theres a thread in the A116 or A110 forum which i will share here soon...
Cheers!!!!
Click to expand...
Click to collapse
sure @kannanrs, let me know, i wil also check with the service center. BUt they rather take it as a hardware issue and dnt undrstnd software issues.

@satsmagic,
dunno how to classify this issue either hardware or software, but it gave us a jolt, nonethless..
Greetings...

kannanrs said:
@satsmagic,
dunno how to classify this issue either hardware or software, but it gave us a jolt, nonethless..
Greetings...
Click to expand...
Click to collapse
yes @kannanrs , it's fine i will post an update after i visit the service center

kannanrs said:
@satsmagic,
dunno how to classify this issue either hardware or software, but it gave us a jolt, nonethless..
Greetings...
Click to expand...
Click to collapse
as expected the srvice center guy said, prblm with motherboard, get it replaced, i dnt think so. SP tools still detects the phone and flashes preloader, then comes error 5068
On searching for the NAND FLASH WAS NOT DETECTED, i found on some forums that if we have a back up of FLash from other device with stock ROM then it can be helpful, see below link (post #33 & 34)
http://www.chinaphonearena.com/foru...NAND-Flash-MT6589-MT6577-MT6582-MT6572?page=4
I presume stock rom should have that but still can someone provide me the same as mentioned in these post. M not sure hw to make tht backup but if anyone here knows that
or a back up using MTK Droid Root and Tools, see below link, it says if its detected its not dead
http://forum.xda-developers.com/showthread.php?t=1943442
see this post as well
http://forum.xda-developers.com/showpost.php?p=58815549&postcount=15
might be a back up can help me

@satsmagic,
Thank you for the reply...Will share the link for stock rom with you from the source sites.
Canvas4 forum also has some of them..rooted stock to pranjal's that serve the purpose.
Cheers...

kannanrs said:
@satsmagic,
Thank you for the reply...Will share the link for stock rom with you from the source sites.
Canvas4 forum also has some of them..rooted stock to pranjal's that serve the purpose.
Cheers...
Click to expand...
Click to collapse
i have stock ROM, but that doesn't sort out the prblm.
i think a back up from MTK Droid tool would help, is that different than the stock ROM. Can someone make a backup of the stock ROMusing this tool and provide.

the masters here @shiv.guddadmath @kannanrs @gamerboy_010 @rishivg @FSadino @pranjal18 @NeroD @rahilj007 @Yash98 @jayadev01
please provide me a back up of the stock ROM using the MTK droid tool
Please read post 28 on the below link, seems there is a way out. Lets giv it a try
http://www.chinaphonearena.com/foru...help?page=3&highlight=nand+flash+not+detected

getting error at flashing
Brom error enable dram failed 4032
Pls check loads matches correctly

need help... able to boot into fastboot/flash mode but cannot boot into system

hi all i have bricked my device... i currently cant boot into the phone but was able to boot into fastboot ( green light ) flash mode ( blue light )... tried to flash a new firmware but get stuck on flashtool... pls help i only have 1 device and its my daily phone... pls help.... thanks in advance....

lets start out with the easy steps do you have all the drivers installed??

Yes all drives installed but when I flashed the stock rom its always stuck at modem. Tried to just flashed kernal and system its always stuck at system

melvinhatred said:
Yes all drives installed but when I flashed the stock rom its always stuck at modem. Tried to just flashed kernal and system its always stuck at system
Click to expand...
Click to collapse
did you download the firmware from the web or did you download from flashtools??

I downloaded both from the web and flashtool extracted kernal.sin and system.sin flashed both and stuck on system.sin

i have the same problem here , every time i want to flash the hole rom it stuck on flashing modem.sin , i tried to flash kernel.sin sepratelly and it was successful but then i tried to flash system.sin and now its stucked on reading device information for about an hour.i dont know what to do and im searching about 2 days to find a solutionffor mount the system via twrp and there is not a one for z5p.

Flash tool for Xperia devices
1 : install this http://dl-developer.sonymobile.com/tools/Flash_tool_for_Xperia_8.zip for unlocked bootloader and connect to flashmode (green led)
2 : look for install correctly https://www.youtube.com/watch?v=DCojEljM598 !
3 : original page from sony :How to download and install the flash tool : http://developer.sonymobile.com/open-devices/flash-tool/how-to-download-and-install-the-flash-tool/
4 : please check thank !!!

bot @melvinhatred , @mahyjooon
seems like u have FLASHED wrong kernels, what are your Exact devices? E6xxx ?
tell me your devices , so that i can guide u better
when you downloaded latest FTF, why did u extract? there is not such need!
download full ftf file via FLASHTOOL ! / the last button on flashtool menu is Xperifirm , click it, select your DEVICE MODEL (accurately) from LEFTSIDE menu, then on the rightside, download LATEST rom as per your country (if country is not listed then Central USA / Europe , or MENA Arabic also) will do just fine.
after FLASHTOOL download and prepare your ftf file, connect your device in FLASH MODE and FLASH this rom (wipe data/kernel/system/setting/userdata ALL)
NOW --------------- since you have BRICKED/ bootloop fone try this
PRESS POWER+VOLUME up key for 5 seconds --- AS SOON AS FONE VIBRATE - RELEASE FINGERS INSTANTLY!!!!
if it restarts and goes in to boot loops then
PRESS POWER BUTTON + VOLUM UP KEY FOR 15 SECONDS --- THE FONE WILL VIBRATE 3 TIMES!!!!!!!!!!!!!!!!! WHILE ITS VIBRATING SECOND TIME, RELEASE YOUR FINGERS AT ONCE!!!
THE device will sleep.
now try connection your device for flashing in flash mode for FLASHTOOL
this trick / methods is tested by me for xperia z (older device),
tell me what happens with your z5 plzzzzzzzzzzzzzzzzzzzzzz

@YasuHamed
thanks for your reply ^_^
i have E6833, i was tring to root it via this guide
http://forum.xda-developers.com/z5-...ck-root-xperia-z5-premium-sony-stock-t3335974
but after installing supersu it faced softbrick and didn't boot so I tried to flash stock .253 tft file which i had downloaded from other sources , with flash tools but it stuck on modem.sin and i have to brought it to the shop to have it recover by box .its not the first time i'm facing the problem with flash tools , it always stock on one step for about an hour, the time before the last, i was trying to update it by flash tools and it stucked again.the xperia companion isn't working either -_- it says that it cant connect to network to find the update ! i checked the firewall and internet explorer internet options tab , but nothing worked for me ! my flash tools version is 0.9.22.0 build on 16-5-2016 . the last time i tried 0.9.18 version cause i saw somewhere that maybe the problem is related to new version but it didn't worked again, at the end what i think is that there should be zip flashing method from custom or stock recovery for flashing stock Roms too ! flash tools sucks in my case -_-

mahyjooon said:
@YasuHamed
thanks for your reply ^_^
i have E6833, i was tring to root it via this guide
http://forum.xda-developers.com/z5-...ck-root-xperia-z5-premium-sony-stock-t3335974
but after installing supersu it faced softbrick and didn't boot so I tried to flash stock .253 tft file which i had downloaded from other sources , with flash tools but it stuck on modem.sin and i have to brought it to the shop to have it recover by box .its not the first time i'm facing the problem with flash tools , it always stock on one step for about an hour, the time before the last, i was trying to update it by flash tools and it stucked again.the xperia companion isn't working either -_- it says that it cant connect to network to find the update ! i checked the firewall and internet explorer internet options tab , but nothing worked for me ! my flash tools version is 0.9.22.0 build on 16-5-2016 . the last time i tried 0.9.18 version cause i saw somewhere that maybe the problem is related to new version but it didn't worked again, at the end what i think is that there should be zip flashing method from custom or stock recovery for flashing stock Roms too ! flash tools sucks in my case -_-
Click to expand...
Click to collapse
i have E6833 too and its rooted and i shared my xperience fully here
http://forum.xda-developers.com/z5-...ting-xperia-z5-z5p-variants-drm-keys-t3437902
i will go in preface
1. what is your windows version? flashtool don't work goo on windows8 / 10. it usually hands at some point , i use win7 x64 and also flashtool x64 version
2. what were the sources u donwloaded the ftf file?
3. better to download ftf file via flashtool itself (last button is Xperifirm, click it, find SATSUKI dual E6833 and version of USA/ MENA ending .253) and flash it
4. while flashing disable antivirus, I used SAMSUNG galaxy usb data cable (if that makes difference) ,
5. with me it stuck at reading headers for 19mins but then it closed all headers and flashing was done.
plz read my post.
thanks

LG G3 D851 10f at Zero stage Help.. Urgent Please someone

hi dev.
My lg g3 d851 is rooted..and i want to flash roms in it.. so i heared that i have to be rooted.and cwm installed.i did successfully rooted my device.. and downloaded the twrp as my varient is d851 . to flash it i hae to download flashify .it opened and flashed the recovery successfully.after that it prompted me to reboot. as i did .LG logo came up and wih the blink of an eye it disappeared and black screen came up with a micro text line saying [780] fastboot adb started.
when i tried to manually go through the recovery mode. i did hold down the volume down button and held the power button. as the LG logo appeared i released for half a sec and then quickly presssed it again. but it again said something with the micro text.. i am searching here and there on the internet .it is my favourite forum ( XDA ) it was helpfull for me with every other phone i've used but this time im getting no Help..
my current android version is KitKat 4.4.2
Software version is D85110f
Build Number is KT49L.D85110f
Rooted.
Kindly Help me
I didn't even have stock recovery nor the TWRP.
Kindly Help me ASAP.....

GeekYagami said:
hi dev.
My lg g3 d851 is rooted..and i want to flash roms in it.. so i heared that i have to be rooted.and cwm installed.i did successfully rooted my device.. and downloaded the twrp as my varient is d851 . to flash it i hae to download flashify .it opened and flashed the recovery successfully.after that it prompted me to reboot. as i did .LG logo came up and wih the blink of an eye it disappeared and black screen came up with a micro text line saying [780] fastboot adb started.
when i tried to manually go through the recovery mode. i did hold down the volume down button and held the power button. as the LG logo appeared i released for half a sec and then quickly presssed it again. but it again said something with the micro text.. i am searching here and there on the internet .it is my favourite forum ( XDA ) it was helpfull for me with every other phone i've used but this time im getting no Help..
my current android version is KitKat 4.4.2
Software version is D85110f
Build Number is KT49L.D85110f
Rooted.
Kindly Help me
I didn't even have stock recovery nor the TWRP.
Kindly Help me ASAP.....
Click to expand...
Click to collapse
Personally i don't really like flashify or any other similar apps.But as you are a beginner at all these follow this simple steps.
Can you boot your phone?
Try using the official App provided by TWRP
Go to Google Play Store and search Official TWRP app,download
Go to the application and select "TWRP Flash" option,after that select your device model and then select the latest TWRP version(3.0.2.0 or 3.0.3.0).
After all these click the bottom Download TWRP.
That's all.

Can you boot your phone?
Try using the official App provided by TWRP
Go to Google Play Store and search Official TWRP app,download
Go to the application and select "TWRP Flash" option,after that select your device model and then select the latest TWRP version(3.0.2.0 or 3.0.3.0).
After all these click the bottom Download TWRP.
That's all.[/QUOTE]
Yes i can Boot my phone.and i have also tried the official twrp app..but still when i boot into recovery it says fastboot mode started

GeekYagami said:
Can you boot your phone?
Try using the official App provided by TWRP
Go to Google Play Store and search Official TWRP app,download
Go to the application and select "TWRP Flash" option,after that select your device model and then select the latest TWRP version(3.0.2.0 or 3.0.3.0).
After all these click the bottom Download TWRP.
That's all.
Click to expand...
Click to collapse
Yes i can Boot my phone.and i have also tried the official twrp app..but still when i boot into recovery it says fastboot mode started[/QUOTE]
Try re-flashing your Stock ROM.

Dude how can i reflash.. when i can't get to recovery mode or downloading mode..? how is it possible to flash anything just like that
.

GeekYagami said:
Dude how can i reflash.. when i can't get to recovery mode or downloading mode..? how is it possible to flash anything just like that
.
Click to expand...
Click to collapse
I'll link you and a guide on how to reflash dl mode.
Edit: Here https://forum.xda-developers.com/lg-g3/help/how-to-lg-g3-download-mode-stuck-t3325120

First of all thanx man for bieng there.
secondly i've already did it the link procedure says..i successfully flashed laf.img but still im in fastboot mode. i just wanna know my varient is D85110f and i think thats the only problem i can't find laf.img for 10f there are 10c 10m 10r but no 10f even on the whole internet i searched here and there but couldn't find files for 10f what should i do. i cant access the download mode. i dont have recover. i even curropted my stock recover. i can't even go the factory reset mode.. but my phone is working like a charm no issue no problem.. every thing is working flawlessly . but still i need the download mode,stock recovery,and custom recovery. my software version is D85110f the (F) is the f++king problem. 've flashed 10C laf.img with no issue. what to do man. seriously its killing me inside.. help me.ASAP.

GeekYagami said:
First of all thanx man for bieng there.
secondly i've already did it the link procedure says..i successfully flashed laf.img but still im in fastboot mode. i just wanna know my varient is D85110f and i think thats the only problem i can't find laf.img for 10f there are 10c 10m 10r but no 10f even on the whole internet i searched here and there but couldn't find files for 10f what should i do. i cant access the download mode. i dont have recover. i even curropted my stock recover. i can't even go the factory reset mode.. but my phone is working like a charm no issue no problem.. every thing is working flawlessly . but still i need the download mode,stock recovery,and custom recovery. my software version is D85110f the (F) is the f++king problem. 've flashed 10C laf.img with no issue. what to do man. seriously its killing me inside.. help me.ASAP.
Click to expand...
Click to collapse
I see that you have messed a lot with your system partitions.
I'll try to find something helpful.
Till then try checking if you can use system upgrade.(To go for example to lollipop while it may save your phone and also be able to flash the correct laf.img)
Question:After you finished the procedure on flashing the laf.img(for d851)(also you can flash the 10d laf.img as the OP said in the guide)did you pull the battery out and Boot to download mode(manually)?
How to get to Download Mode

yes i did try to boot into dl mode manually..

GeekYagami said:
yes i did try to boot into dl mode manually..
Click to expand...
Click to collapse
You also did pull the battery after flashing laf.img(10d) for D851 Model?
So... I think that after you tried doing all these and nothing worked, you'll be unable to get Download mode back,but let me check some of the system partitions and check if you can manually insert the laf.img file.

Somehow you can insert the laf file to your phone but it needs extracting (the laf.img) to get the proper file.
I found the location of the laf file.
But if anyone can be found with D851 can send the laf file here for you.
Two other solutions are:
1.Staying without dl mode? Maybe.
2.Buying a new motherboard.

Links to LAF files in this post:
https://forum.xda-developers.com/lg-g3/help/how-to-lg-g3-download-mode-stuck-t3325120
Specifically, here's the download site for stock partitions:
http://downloads.codefi.re/autoprime/LG/LG_G3/D851/stock_partitions

hey there ...
mate there is some serious trouble im into.. my software said its D851 but when i opened the case i've found LS990 on the motherboard.my phone is now in Qualcomm HS-USB Qdload 9008 mode..what should i do now.. help me on this..i've tried board diag its says device not found in dload mode try flsh programmer.something like that.. what to do i've bricked my phone..and the repairing guy is asking for around 90$.. what should i do now..

Try using the LAF for the LS990, here:
http://downloads.codefi.re/autoprime/LG/LG_G3/LS990
I'm not familiar with the Qdload mode, or what to do there, so sadly other's will have to help you out.

@GeekYagami
Check here:
https://forum.xda-developers.com/lg-g3/help/how-to-hard-unbricked-lg-g3-variants-t3394575
It discusses the mode you seem to be in.

Bootloop after root

hey guys , after unlocking the bootloader i tried to root my g4 H815 with TWRP recovery 2.8.... , the recovery said that it worked , unfortunately after rebooting the device , i got a bootloop , tried to back up using the "Send_Command" interface via cmd because i really need the data , but i keep getting the FAIL message , i can't even flash the stupid device , it indeed starts the flashing process according to download mode , but everything disappers after about 2 seconds , i'm sure i have correct usb drivers , it's like the phone's write protected , anybody please help me

Sisine said:
hey guys , after unlocking the bootloader i tried to root my g4 H815 with TWRP recovery 2.8.... , the recovery said that it worked , unfortunately after rebooting the device , i got a bootloop , tried to back up using the "Send_Command" interface via cmd because i really need the data , but i keep getting the FAIL message , i can't even flash the stupid device , it indeed starts the flashing process according to download mode , but everything disappers after about 2 seconds , i'm sure i have correct usb drivers , it's like the phone's write protected , anybody please help me
Click to expand...
Click to collapse
Are you able to be in the download mode for some time? Try to use DLM backup using lglaf to backup all your partitions.

tulen_kobi said:
Are you able to be in the download mode for some time? Try to use DLM backup using lglaf to backup all your partitions.
Click to expand...
Click to collapse
I have acces to download mode of course , but for some reason it's not possible to acces phone memory , as i can't even flash a firmware , i don't know what's wrong , first i thought the problem was due to drivers , but i realized it's not , i'm done trying to backup my data , i just wanna flash the stupid phone

Sisine said:
hey guys , after unlocking the bootloader i tried to root my g4 H815 with TWRP recovery 2.8.... , the recovery said that it worked , unfortunately after rebooting the device , i got a bootloop , tried to back up using the "Send_Command" interface via cmd because i really need the data , but i keep getting the FAIL message , i can't even flash the stupid device , it indeed starts the flashing process according to download mode , but everything disappers after about 2 seconds , i'm sure i have correct usb drivers , it's like the phone's write protected , anybody please help me
Click to expand...
Click to collapse
I would find the stock firmware that you where on and try to flash lgup or flash tool and start again you will lose data but device will be working. And remember to always backup before hand.

First of all thanks a lot as your method perfectly worked , i just have another question out of curiosity if you don't mind , altough LGUP did work of course , i recently noticed that if you don't already have the Google account already registered on the device , and precisely on Lollipop and above , there's absolutely no way you would boot up your phone , i wonder if there's a way to bypass that Google Verification thing !

and just for reference , LG UP doesn't entirely flash the device , it just .... , you know , like just replacing the old firmware without deleting the data , LG FLASH TOOL 2014 doesn't work either , it doesn't even start the flashing process regardless of the firmware , so it's not an option .

Question My Redmi Note 12 4g bricked.

I installed wrong rom then my red mi is bricked. nothing appears on the screen and when i trying to flash on miflash tool i'm taking 'cannot receive hello packet' error. what can i do?

berkantbuyukler said:
I installed wrong rom then my red mi is bricked. nothing appears on the screen and when i trying to flash on miflash tool i'm taking 'cannot receive hello packet' error. what can i do?
Click to expand...
Click to collapse
Did u unlock bootloader first?
Second, can u boot into Fastboot mode with bricked statue?
If first question is yes . Then follow these steps
________
U should have able to flash into Fastboot mode
So u can flash whole room with manual way but fast and easy with SH Script
Here's link of Tapas 4G version But (EU Rom)
https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv14/xiaomi.eu_multi_TAPAS_V14.0.7.0.TMTMIXM_v14-13.zip/download
It's a stable rom and it has more light UI Apps So u can see mi bloatware apps got removed
And can get more functions better than global version like .. recording in calls + extended ram .. etc
Anyway
The link file has ( the rom folders and scripts .. for each OS like Windows + Mac and Lynx system)
So u can flash Those Scripts With Suitable OS that u have...
But as i said
"You Should Have Able To Boot into Fastboot Mode"
Note : when u run SH file named with
( Windows install whole rom ) or something like this.. it will take a long time so don't worry specifically when u see super (1\8)
Files got stuck
It just takes a little bit more time
After all when SH file finishes flashing ,It will automatically restart into the system.
That's all
GoodLuck

yes, i already unlocked bootloader lock but i cant boot into fastboot mode, just booting into edl mode

berkantbuyukler said:
yes, i already unlocked bootloader lock but i cant boot into fastboot mode, just booting into edl mode
Click to expand...
Click to collapse
If it's on edl mode u will need to watch this video

XBoda said:
If it's on edl mode u will need to watch this video
Click to expand...
Click to collapse
does it work normally since the tool doesn't support Note 12 yet?

Can you recover from the brick? i'm thinking in installing one of the roms available for the device...