Okay, a brief history.
I have an h818p, bought here in the Philippines. I wanted MM and it was taking a while to roll out here so I used the LGUP method and flashed a Russian 20c kdz into my phone. It ran okay but had some trouble with data connections.
I finally had some time to see if I can fix it so I decided to run the 20D euro into the phone and got some error so I ended up doing a factory reset. My data works perfectly now and everything is up, the only problem I have is that every single time I boot my phone I get this error.
I tried looking as to its meaning and I think it has something to do with the wrong kernel being in my phone or something like that.
Now if anyone can please help me, find a solution. I originally wanted to flash a kdz from the Philippines but the only one I could find was 10l. Now that the errors been popping up I cant get my LGUP to read my phone properly (it wont even let me set a kdz, its asking me to find a .tot file)
Now Im wondering if I can use the LG Flash Tool to flash the 10l philippine version and if this will help. I dont want to experiment anymore only to brick my phone.
Related
Hi I bought a refurbished LG G4 and I set it up and used it for one day and it was great. But I went into the about section and noticed that it wasn't running Android 6.0 yet so I connected it to LG bridge and updated it through the program. Next thing I know after it finished updating it booted into encryption mode asking for a password. I try enter something and it goes to 29 attempts out of 30 if I try it again it just stays there and doesn't change or or go below 29 it has now randomly changed into Chinese too.
I contacted the company I bought it off and explained it to them and said there should have been an explanation in my package. But there wasn't.
It's not allowing me to boot into recovery and I have no idea what to do.
I used this phone for one day and spent a lot of money on this phone and I have no idea what I can do to fix this situation.
thomas.wesley said:
Hi I bought a refurbished LG G4 and I set it up and used it for one day and it was great. But I went into the about section and noticed that it wasn't running Android 6.0 yet so I connected it to LG bridge and updated it through the program. Next thing I know after it finished updating it booted into encryption mode asking for a password. I try enter something and it goes to 29 attempts out of 30 if I try it again it just stays there and doesn't change or or go below 29 it has now randomly changed into Chinese too.
I contacted the company I bought it off and explained it to them and said there should have been an explanation in my package. But there wasn't.
It's not allowing me to boot into recovery and I have no idea what to do.
I used this phone for one day and spent a lot of money on this phone and I have no idea what I can do to fix this situation.
Click to expand...
Click to collapse
not sure if flashing stock firmware will help... now the question is what version of android has right now.?
you can try the back to stock guide... not sure if it will erase everything .. but if you going to downgrade lets say you took the last update antiroll back 3 you can only downgrade to a firmware that its the same antiroll back version.. the last update from my variant its v3.. so ask first... then download firmware flash an d hope its wipes all and start from scrath..
http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
It says on the website that it's running Android 5.1.
I tried the KDZ method last night and I would get and error when the upgrage was at 9%.
It's a refurbished phone, if that makes all the difference?
thomas.wesley said:
It says on the website that it's running Android 5.1.
I tried the KDZ method last night and I would get and error when the upgrage was at 9%.
It's a refurbished phone, if that makes all the difference?
Click to expand...
Click to collapse
not sure, you best bet is to post that problem in that thread and provide all info and pic of error..
Use LGUP or LG FLASH TOOL 2014 for going back to the same kdz u were on? Also try to remember when u bought the phone did it had update center when u go into "about" u didnt try OTA via wifi?
@ day ago I set off on a journey to root my phone so I could get xposed to work with pokemon go. I Followed a couple guides and every site stated that you need Twrp. The thing is im running marshmallow on the D850 and any time I try to boot my phone in recovery I get "boot verification failed" and get a black screen with the notification flashing and this even prevents me from even doing a factory reset. From lurking the forums i've learned that the best way to fix is to flash back to an older version of android but most of these guides seen old and out dated and I cant seem to find a kdz for the D850 . Thank you and your help will be very much appreciated.
snakeyes250 said:
@ day ago I set off on a journey to root my phone so I could get xposed to work with pokemon go. I Followed a couple guides and every site stated that you need Twrp. The thing is im running marshmallow on the D850 and any time I try to boot my phone in recovery I get "boot verification failed" and get a black screen with the notification flashing and this even prevents me from even doing a factory reset. From lurking the forums i've learned that the best way to fix is to flash back to an older version of android but most of these guides seen old and out dated and I cant seem to find a kdz for the D850 . Thank you and your help will be very much appreciated.
Click to expand...
Click to collapse
If you dont find an mm kdz jut flash a lolipop kdz by using lg up....
The only way to go back to stock firmware on D850 is to flash a tot file using LG Flash tool (as no other method is currently available).
You can follow this guide for that purpose
http://forum.xda-developers.com/att-lg-g3/general/unroot-return-to-factory-stock-att-lg-g3-t2820827
:crying:
My issues is quite complicated. Please be patient and read on.
Less than a week ago, I bought an LG G3 D855. It wasn't brand new and definitely out of warranty.
It was on the 4.4.2 Os version but I couldn't update it because I couldn't locate the UPDATE CENTER and after some research online, I found out it was because it was rooted. I couldn't find a Supersu application anywhere on the phone anyways but Root checker confirmed that it was rooted.
I downloaded the stock kitkat firmware in a .tot format and I tried flashing using LG Flash Tool for TOT but it failed because "Device version is different"
I checked the Imei online and it stated that the device is a Sprint LS990 but the details embedded in the phone all say it is D855
I checked online and found a couple of posts about this error and one user said he was able to fix it by flashing the actual Sprint .tot with the lg flash tool. I tried that but it didn't work. It still said "Device version is different. Check BIN or dll"
I checked online and found results pointing to a generic .dll file for G3s and I downloaded it but when I used it on the Flash tool, it resulted to an error "CrossDL blah blah"
So I found a Marshmallow kdz file. LGUP won't see my device model so I was able to flash it after editting the software in my build.prop to D85510n.
***I have always changed the port to COM41 in all the steps I used
The LG UP detected my model and it flashed to 100% but got stuck on a bootloop by loading the lg screen, freezing and restarting by it self. It never gets to the homescreen.
I downloaded lollipop kdz reflashed using LGUP in a form of downgrade and it got to 100% and got stuck at the lg screen while trying to reboot.
I redownloaded the stock kitkat rom and used the Lg flash tool but it failed. It said 'PID null IMEI Null"
I used LGUP to reflashed. It came to my understanding that the LGUP can flash both kdz and tot. So it flashed to 100% but got stuck at the lg screen and I have tried all I can but it is stuck. It can go into download tho. I don't know what to do about the IMEI. I don't know if the last flash retrieved it. I don't kniw what to do.
It no longer shows as LGE AndroidNet USB Serial
Please can anyone help me?
I just need my phone to work again. I was stubborn and now I regret it. I should have just stuck to kitkat. I'm so desperate to get my phone working that I wouldn't mind Android Froyo Os if it was ever possible.
PLEASE HELP!!!
I think you have to repair the IMEI...
maybe this can help
https://youtu.be/nwzgs1Cmr9k
Sent from my LG-D855 using XDA Free mobile app
I think that he forgot to hard reset after flashing the kdz.
i completly know what you should do:
1: force your phone into qualcomm 9008 mod.
2: use board diag unbrick instruction and it will boot on download mod. for unbrick you will need best kitkat tot for your G3 model.
3: flash best lollipop or kitkat tot to make your phone alive
and then flash it with any kdz you want(it should be for your G3 model)
my telegram ID : @Erfan_rv
pls help me
Apparently, it seems my bricked phone keeps disconnecting during flashing process. I dont think it the fault of the cable because I have used different ones and they all seem to work fine with other phones. I have tried a different computer and still the same results. it connects as qualcom 9008 but once I try to start flashing, it disconnects and interrupts the flashing process. my phone just shows a grey screen now when I power it up with the battery in. also, I was trying to upgrade from linear os to the latest linear os. I cant fine the tot out there so im using zv6 currently. could this also be the problem? thanks in advance
Hello, I made the mistake of trying to use a remote unlocking service on eBay to unlock my LS992, but the person performing the operation somehow managed to brick my phone. The device is stuck on download mode, and though he attempted to re-flash the firmware it was unsuccessful. I was on the line with him for several hours with no fix in sight. He claims that the phone was on software version ZVA, but I am unable to confirm that as the phone is bricked, however, when I connect to LGUP it reports the version as LS992V3. I'm not sure if it is correct.
So the bottom line is, I would like to try to reflash the phone for myself, but I am unable to find the .dll files for the Sprint variant anywhere to flash with LG UP. I'm also unsure of what version stock firmware I should flash, as he said that flashing the wrong firmware might hard brick. Any insight on what to do will be greatly appreciated, or at the very the correct .dll file to use when flashing.
Thank you for your time and consideration.
Good day guys,
So after my phone went dead from a phone carrier update went bad i set up to find a way to fix it, and i did manage to Unbrick it back to android 5.
That was fine and all but on the process of fixing it i found out that the android 6 update is still not available at my country (living in 3ยบ world suck) so after some research i found that my phone (h522f) is the same as h525n and since them i ve been trying to find a way to flash a v20a image with android 6 from the h525 whit no luck.
Tried LGUP, it shows "unknown"
Tried a lot of different version of LG Flash tool (the 2014 version was the one capable of fixing my phone but it does not flash the h525 kdz and the other versions give me a failed previous load error)
Tried KDZ_FW_UPD (does not open)
Tried changing the build.prop
So what i want to ask is if there is any way to flash a firmware from the h525 to my phone or if i have to w8 for lg to release an official update?