Related
Is this the highest?
http://www.seidioonline.com/product-p/pmc.htm
Post links if you know of higher ones, thank you.
Sent from my ADR6400L using XDA App
There are 2.1A usb adapters, but I don't think microUSB can take advantage of it. The one you linked is a 1A, which is the same as the wall charger HTC gave with the phone. I'm currently using a 1A usb adapter in my truck.
Ok that's probably what I'm looking for then. Are there wall chargers greater than what came with the phone that I can take advantage of?
Your best bet would be to try the USB adapters made for iPads. The Apple products can utilize the 2.1A chargers with their sync cables, but I'm not sure if a microUSB cable can though. I have some 2.1A wallchargers from some of my Apple products, I'll test them later and let you know what I find out.
http://www.verizonwireless.com/b2c/...ryDetails&archetypeId=12299&accessoryId=46370
I just got an Enercell from Radio Shack with dual usbs. Max output is 2.5A divided between the two ports.
http://www.radioshack.com/product/index.jsp?productId=11329448
on sale now for only $14.99. Seems to be of good quality.
The Motorola rapid chargers rock.
Guys, unless you mod the usb adapter 5V spec, you aren't doing squat with a "high power" adapter. The device has an input impedence that will draw a certain amount of current at 5v., and that's it.
Standard battery: 1400 mAh
Time to charge: 4 hrs (according to manual)
That's 1400/4 = 350 mA.
Most adapters on the market spec more than that, they're usually 500 mA or above. And again, unless you boost the volts, you're not going to be able to push more than 350 mA or so.
So don't waste you're money.
On the other hand, if your going to share a car outlet with another device like mp3 or ipod, then yeah, you'll need a higher output, two port, adapter.
Edit: It just occurred to me that if you're using the phone heavily while charging, then yeah you may need more than 500 mA. My currrent widget shows the phone can draw another 250 mA or so during use. That plus the charge totals to around 600 mA. But depending upon design, the phone may not be able to pull in all 600 mA. A test with a current meter would be real interesting.
The charger shipped with the Thunderbolt is a 1 Amp charger.
If I use a 500 mA charger the Current Widget shows a +450mA charge current. However if I use the 1A charger, I get a charge current of about +850mA.
Given that the google navigation gobbles over 400mA when running, you need a car charger with greater than 500mA capacity of you want the phone to charge at the same time.
Sent from my ADR6400L using XDA App
boingboingbilly said:
The Motorola rapid chargers rock.
Click to expand...
Click to collapse
Good to hear, I ordered one today for $11 on ebay. I had heard other people say they liked that one too.
Ecomaniac said:
Guys, unless you mod the usb adapter 5V spec, you aren't doing squat with a "high power" adapter. The device has an input impedence that will draw a certain amount of current at 5v., and that's it.
Standard battery: 1400 mAh
Time to charge: 4 hrs (according to manual)
That's 1400/4 = 350 mA.
Click to expand...
Click to collapse
You're making the incorrect assumptions that the charging rate is constant, and charging is 100% efficient. Li-ion batteries can be charged at up to a 1C rate (i.e. 1.4A for a 1400 mA cell). Add the power drawn by the phone itself, and a 1.8 Amp charger might not be unreasonable (1.8 A is the specified limit for micro USB connectors). Whether the phone will actually do a maximum rate charge, I don't know.
This, from a TI Application Note (Google for SLAA287, board won't let me post links):
A Li-Ion battery charging process consists of three stages:
· Slow Charge: Pre-charging stage using current of 0.1C
· Fast Charge: Constant current charging stage using current of 1C
· Constant voltage charging stage
During the slow charge stage, the battery is charged with a constant low charge current of 0.1C, if the battery voltage is below 2.5V. The slow charge stage is rarely used during the charging process of a Li-Ion battery.
The fast charge (constant current) and constant voltage charging are the most important stages during a recharge process. Most Li-Ion batteries have a fully charged voltage of 4.1 or 4.2V.
The battery is first charged with a constant current of 1C until a battery voltage reaches 4.1 or 4.2V. The firmware continuously checks the charging current by sensing the voltage at the current sense resistor (Rsense) and
adjusts the duty cycle of PWM output from the MCU. The battery's voltage is checked frequently.
Whenever found the battery's voltage reaches 4.1 or 4.2V, the charger will switch to constant voltage charging mode. The battery is then charged with a constant voltage source at a fixed battery voltage of 4.1 or 4.2 V...When the charging current falls below 0.1C, the charging process must stop.
Click to expand...
Click to collapse
Monoprice has Cig to USB(1A) chargers and the USB to Micro cables in multiple lengths(I ordered 6' ones) for far cheaper than you will find anywhere else
mike.s said:
You're making the incorrect assumptions that the charging rate is constant, and charging is 100% efficient. Li-ion batteries can be charged at up to a 1C rate (i.e. 1.4A for a 1400 mA cell). Add the power drawn by the phone itself, and a 1.8 Amp charger might not be unreasonable (1.8 A is the specified limit for micro USB connectors). Whether the phone will actually do a maximum rate charge, I don't know.
This, from a TI Application Note (Google for SLAA287, board won't let me post links):
Click to expand...
Click to collapse
very useful, thanks!
walbuls said:
Monoprice has Cig to USB(1A) chargers and the USB to Micro cables in multiple lengths(I ordered 6' ones) for far cheaper than you will find anywhere else
Click to expand...
Click to collapse
I second monoprice.
I tried bunch of cig to usb car charger and none matched advertised output... They all showed Charging (USB). I now use AC inverter and it charges just like a wall charger.
eccenpix said:
I tried bunch of cig to usb car charger and none matched advertised output... They all showed Charging (USB). I now use AC inverter and it charges just like a wall charger.
Click to expand...
Click to collapse
I suspect you need to find one which properly follows the USB Battery Charging Specification. That link is to the most recent version, which came out on 7Dec2010 (remember Pearl Harbor!). Version 1.1 is easier - a Dedicated Charging Port is indicated by shorting together the data lines (the two middle conductors on a full sized USB connector. By doing so, it indicates the device may try to draw up to 1.8 A of current (although a dedicated charging port is allowed to limit the current to less than that, it must provide at least 1.5 A).
I bought a cheap USB hub with 5 ports, used an exacto knife to cut the traces going to the data lines (the middle two) on all the ports, and then shorted them together on each port. It's now no longer a USB hub, but a USB charger with 5 ports I can used to charge stuff (phone and Bluetooth, quite often). The AC adapter which it came with does 2 Amps. My Thunderbolt says "Charging (AC)" when plugged into it.
So, if you can open up one of your adapters, just solder a jumper between the middle two contacts (make sure they're not connected to anything else).
Just got the Rocketfish premium microUSB at Best Buy and it has a captive coiled cord and a USB port. TBolt says "AC plugged" and reads +670 mA.
Good choice on the Motorola Rapid Charge - I've burned through 3 other cheap car chargers trying to keep my phone alive while using Google Nav and this is the first one to work!
i have the rapid motorola one on amazon
lippstuh said:
i have the rapid motorola one on amazon
Click to expand...
Click to collapse
+1 Works great! Battery widget usually shows about +800mA while only charging. Real close to the wall charger
Hi All,
Was wondering if anyone knows the maximum current the SGS2 can draw for charging purposes. I had a look at the wall charger provided with it, and it's 0.7a; it takes forever (my opinion) to charge compared to my last phone. Just wondering if it is worth my while investing in a more powerful charger.
Cheers
If you take the battery out and look and the sticker then it says there 1000mA
Excellent thanks; Can't get the back off my phone (fingernails).
oozrafa said:
If you take the battery out and look and the sticker then it says there 1000mA
Click to expand...
Click to collapse
Also, at the start of the SGS2 charging cycle, my wall-plug power meter reads 5.1 W.
5.1 is what the adapter is pulling. All of that isn't getting to the phone. Funny thing for my is the phone charges faster off my blackberry 0.75a charger then it does off my Galaxy I 1a charger.
Sent from my GT-I9100 using XDA Premium App
Someone in another thread mentioned seeing something in the source code about the phone drawing at most 650 mA (instead of a more typical 1000 mA) during charging. If that's the case, a more powerful charger by itself won't help; you'd also need a custom ROM that doesn't limit the charge current.
Does anyone know why Samsung would limit the charge current?
theinstagator said:
Does anyone know why Samsung would limit the charge current?
Click to expand...
Click to collapse
Speculation is that its a heat related problem. Don't want to pull a Sony and have the batteries explode on people... (but again, that's speculation)
Murfle said:
Speculation is that its a heat related problem. Don't want to pull a Sony and have the batteries explode on people... (but again, that's speculation)
Click to expand...
Click to collapse
I also heard that a smaller charging current extends the Li-ion battery's lifetime, even though I'd prefer quicker charging as the battery can be replaced with ease.
I second that. I tried it today with a 1A car charger (USB cig. plug) can't say it made a difference on speed of charge compared to wall one.
Just received my SGSII and the charging is extremely slow. 3+ hours = about 500 mAh, on a 1A wall charger. Never had such a slow charging smartphone before
To change i9100 charging current you have to short r529 or r531
Current limit will change to 1000mA
You can use 2A charger and phone will charge only with 650mA current
But after this short one of those resistors current limit will change to 1A
I use it on my phone and all is fine. Current after change is measured.
Wath this film youtube.com/watch?v=FL71G2YEIHU
Make shortcut of resistor and check your new current and feel the difference.
Is there a logfile, where I can see which charge current is used?
I have the suspicion, that my noname charger is not recognized properly and it only charges with USB current (450mA).
hmm a 1000mA current could be used also for the 2000mAh battery?
Yes, should not depend on the capacity of the battery.
Sent from my GT-I9100 using xda app-developers app
good
thank for all, it help me so much
1000mA is more likely the maximum current that the phone is expected to drain from the battery.
It is not the battery charging current, which is presumably equal to the mentioned 650mA, since the 1650mAh battery charges in about 4 hours.
If the charging current was actually 1000mA, then the 1650mA battery it would charge in 2 hours or so, but as we all know, it is not so, even with a 2A charger.
mine took about 4 hours charge the battery
The charging time depends on the Charger and Rom i use, i havent figured out for what reason.
Sometimes the SGS2 is charged in approx. 1 hour and with other Roms the charging time may take up to 3h.
kirschi said:
The charging time depends on the Charger and Rom i use, i havent figured out for what reason.
Sometimes the SGS2 is charged in approx. 1 hour and with other Roms the charging time may take up to 3h.
Click to expand...
Click to collapse
Definately 650ma, IF the phone detects an High current USB port, otherwise it falls back to lousy 400ma.
You can trick into 650ma always: take a usb cable, cut from the PC plug side the TX/RX cables, on the other side short them on PHONE plug side these two cables.
Phone will now always go into "AC charging mode". Don't worry (too much) for your USB ports, they can all well 1000ma, and the one that cannot will report "high current detected, port disable".
:fingers-crossed:
Hello everyone! My i9300 has some issues. I cut a USB cable female-male, i shorted data lines to the phone, and i take several chargers to measure the current
1. normal usb charger, max 4.8W-600-700mA
2. sam charger aproximative the same-600-700mA, and one time the ampermeter indicates 1A but now aprox 0.4A (
3.lm2576 suplly capable of 3A, the same crt 500-700mA
My kernel suports Stweaks, and i've set current to 1500mA, but the current didn't rise. What is the problem? It's clear that the phone charge with 1A ony on the stock wall charger, all the others neahhhh. I've tried with several usb cables and the same problem. Ideeas please?
On stock kernel will never rise above 1A. On custom kernel you must have a quality charger that can provide constant amperage. Otherwise the current will drop automatically to usb values (failsafe value)
Sent from my GT-I9300 using XDA Premium HD app
You're right. I bought a "quality" charger an the cuurent didnt't rise above 1A, in first seconds it stays on 1A but after that moment it drops to 0.6A even if i disable the safe margin.
The values in STweakes must be equal? All chargers that i've found are creappy! Nothing real, i've watched at one that say it can carry 3,1A but i don't think that it can power it's own led
hi. the battery charger that i got with my LG optimu G Pro is ****. its just now that i checked that i have been deceived
its chinese copy and its only 0.2A charger...
now i know the reason why my phone charges soooo slow...
anyways. i think Note 3 and iPad air charger are 2A and 2.4A. so can i use iPad or Note 3 charger to charge my phone? will that be ok?
any one here using that?
thanks
Use OEM LG charger with 1.2 output. I am using LG G2 OEM charger and it charges very fast! But not sure it's compatible completely
Sent from my LG E988
If youre tech savy you can make your own,you just need a switchmode 5v regulator (they usually put out up to 3 amps) and you put a resistor across the data pins (i think 100 ohm) and itll charge the phone as fast as it can safely charge. I made my own charger for the car and the phone gets fully charged in about an hour and a half. (With screen on and playing Bluetooth music). Other wise if you buy a charger, get as many amps as you can. Atleast 1.5+ . and to make the phone charge in AC mode if it only says USB you need a resistor across the data pins.
Thats funny... my G Pro came with a 1.8a LG charger, my G2 came with a 1.2a.
Yeah you'll be fine. The "extra" amperage in the charger is available capacity that your phone can draw from, it will regulate itself but that can also depend on the charger and how they pin the USB. Its different than if you have extra volts (like a 10vdc charger which would provide too high of a voltage and damage electronics). I usually charge all my phones at when I get home with my wife's iPad charger super fast. Likewise you can use your LG charger to charge the iPad but will be slower since it has less amp capacity to supply. Part of the reason they provide the bigger charger is to sustain battery level while using the device (It should be large enough that the battery doesn't drain while your using the device while plugged into the charger).
Most computer USB ports typically provide .5a of power and will be your slowest charging option, at best you get a newer laptop with "high capacity" ports and it provides only 1.0a.
I've been using an iPad 1st gen charger with GPro since day one, been working flawlessly for 4 months now. Charges fast.
Lots of questions here...
G7 comes with QC 3.0 although the chipset can support QC 4.0 as per Qualcomm. I see on other forums that users can tell when their phone is quick-charging or slow-charging.
1) Does the G7 let you know what speed it is charging at? I'd like to know so I can swap out cables, chargers, Qi pad, to get the fastest charging rate.
2) Is there a difference between Samsung's Fast Charging, and Qualcomm's QC 3.0?
3) If a charger says that it is compatible with Samsung S9's or S9+'s fast charging, will it fast charge the G7?
4) is there a QC Qi pad that is compatible with our QC 3.0 phone? If so, can I assume that I would still need to power it with a QC 3.0 wall wart?
5) Will a USB-PD or USB-IF charger quick charge our phones?
6) What is the minimum QC cable type (USB 2.0, 3.0, or 3.1) needed to get the maximum QC 3.0 charge? Does it have to be a 3.1 cable?
7) I've seen that when I put the G7 on my 1st gen Qi pad (5W micro-USB) that the phone screen lights up, and a circle briefly appears with the charged percentage in the center (while phone is on stand-by). If the phone is unlocked and the display is on, a white window telling me it is wirelessly charging shows up and tells me how long until the phone will be fully charged (again, when placed on a Qi pad). It's currently telling me 19 minutes to full charge from 93%. Is there a way to get this remaining-time info while cable-charging through the USB-C port?
Thanks!
andygold said:
Lots of questions here...
G7 comes with QC 3.0 although the chipset can support QC 4.0 as per Qualcomm. I see on other forums that users can tell when their phone is quick-charging or slow-charging.
1) Does the G7 let you know what speed it is charging at? I'd like to know so I can swap out cables, chargers, Qi pad, to get the fastest charging rate.
2) Is there a difference between Samsung's Fast Charging, and Qualcomm's QC 3.0?
3) If a charger says that it is compatible with Samsung S9's or S9+'s fast charging, will it fast charge the G7?
4) is there a QC Qi pad that is compatible with our QC 3.0 phone? If so, can I assume that I would still need to power it with a QC 3.0 wall wart?
5) Will a USB-PD or USB-IF charger quick charge our phones?
6) What is the minimum QC cable type (USB 2.0, 3.0, or 3.1) needed to get the maximum QC 3.0 charge? Does it have to be a 3.1 cable?
7) I've seen that when I put the G7 on my 1st gen Qi pad (5W micro-USB) that the phone screen lights up, and a circle briefly appears with the charged percentage in the center (while phone is on stand-by). If the phone is unlocked and the display is on, a white window telling me it is wirelessly charging shows up and tells me how long until the phone will be fully charged (again, when placed on a Qi pad). It's currently telling me 19 minutes to full charge from 93%. Is there a way to get this remaining-time info while cable-charging through the USB-C port?
Thanks!
Click to expand...
Click to collapse
The charge rate of the phone irrespective of the chargers we use, it is controlled by the stock kernel. When screen is on, it lowers down the amperage (See Ampere App) to keep off the heat, vice versa etc. We need a custom kernel to have the charging amperes to be changed manually which is really cool. If we have a really cool custom kernel, the CPU governors should preset customisable governors (for smooth performance) and for the charge values, just look for a 3A charger, with the Kernel Adiutor change the values. Meaning the benefits of rooting gives us the complete freedom of our Android! If a 4A charger is detected by the kernel manager app, the charge values should show as "upto 4A even with the screen on! Then no need to be jealous of Dash Charging of One Plus!
I think this article will help you out... Breaks it all down... Samsung charger are not the greatest for fast charging but works better than a basic one... Ultimately I would say USB c to USB c with USB PD is your fastest with QC 3.0/4.0 being a close second..
https://www.digitaltrends.com/mobile/how-does-fast-charging-work/
I don't see that wireless fast charging is b supported by the g7 ... That's a Samsung gimmick ... But the Qi standard chargers charge at the same rate as a basic charger... The lock screen always tells you how long until full no matter what charger you are using and it will say fast charging, wireless or just charging... My observations have been around 1.5 hour for 60 percent to full so about 5 hours if dead, great before going to sleep and I missed it in my least few phones
two_cents said:
I think this article will help you out... Breaks it all down... Samsung charger are not the greatest for fast charging but works better than a basic one... Ultimately I would say USB c to USB c with USB PD is your fastest with QC 3.0/4.0 being a close second..
https://www.digitaltrends.com/mobile/how-does-fast-charging-work/
I don't see that wireless fast charging is b supported by the g7 ... That's a Samsung gimmick ... But the Qi standard chargers charge at the same rate as a basic charger... The lock screen always tells you how long until full no matter what charger you are using and it will say fast charging, wireless or just charging... My observations have been around 1.5 hour for 60 percent to full so about 5 hours if dead, great before going to sleep and I missed it in my least few phones
Click to expand...
Click to collapse
Thanks! I noticed you do not have a G7 listed as a current phone in your signature. Is your answer above based upon your experience with Samsung phones and their charging system, or specifically with the G7 (or other QC 3.0 phones)?
I hadn't notice the charging speed on the lock screen, as I have the phone set to basically bypass it all the time (fingerprint, facial recognition, & geo-fence)...so I didn't even know it was listed there on the bottom. Thanks again...now I know it's there
Strange thing is I went through a bunch of permutations with cables (various generations), and charge blocks and Qi pads this morning, and with the phone starting at 93% charged, it made no difference in remaining charge time no matter what combination of the items I hooked up. I saw the standard "charging" memo with some combos, and the "fast charging" one too, with others. Can I assume that even though the phone might say it's fast charging, it ramps the speed/power level up and down as necessary due to the current state of charge, or heat or some other factors? Would it also possibly switch into fast-charging with more power if the phone was starting at a lower state of charge, or possibly cooler?Yes, I'll have to read the link above as it's probably covered there
"Fast Wireless Charging" is supported and working.
I have a RavPower 15w and 3 umdigi 15w qi wireless pads that all say wirelessly fast charging when connected. Needs an 18w QC2-3 charger for the input voltage ranges needed to work.
It is noticeably faster than a 10w qi pad and only slightly slower than QC 3.0 USB average charge.
Sent from my LM-G710 using Tapatalk
datafoo said:
"Fast Wireless Charging" is supported and working.
I have a RavPower 15w and 3 umdigi 15w qi wireless pads that all say wirelessly fast charging when connected. Needs an 18w QC2-3 charger for the input voltage ranges needed to work.
It is noticeably faster than a 10w qi pad and only slightly slower than QC 3.0 USB average charge.
Sent from my LM-G710 using Tapatalk
Click to expand...
Click to collapse
Of the 2 Qi pads you mention, any preferences towards one or the other (or a different one altogether)? I have an Anker QC 3.0 charger I can connect up to it.
BTW.. I cannot locate a 15W Ravpower pad. What model is it? And is the Umdigi a model Q1?
andygold said:
Thanks! I noticed you do not have a G7 listed as a current phone in your signature. Is your answer above based upon your experience with Samsung phones and their charging system, or specifically with the G7 (or other QC 3.0 phones)?
I hadn't notice the charging speed on the lock screen, as I have the phone set to basically bypass it all the time (fingerprint, facial recognition, & geo-fence)...so I didn't even know it was listed there on the bottom. Thanks again...now I know it's there
Strange thing is I went through a bunch of permutations with cables (various generations), and charge blocks and Qi pads this morning, and with the phone starting at 93% charged, it made no difference in remaining charge time no matter what combination of the items I hooked up. I saw the standard "charging" memo with some combos, and the "fast charging" one too, with others. Can I assume that even though the phone might say it's fast charging, it ramps the speed/power level up and down as necessary due to the current state of charge, or heat or some other factors? Would it also possibly switch into fast-charging with more power if the phone was starting at a lower state of charge, or possibly cooler?Yes, I'll have to read the link above as it's probably covered there
Click to expand...
Click to collapse
My pixel screen went bad and the charging port went bad also... Just got the g7 so I haven't changed my signature or updated my devices...
Samsung Fast charge is basically qc2 ... And standard USB A to C do not support the higher current that USB C to C does... I notice fastest charging with my pixel USB PD charger...
And yes you won't notice as much fast charging from the top 20 percent of the battery to prevent over charging...
for me, from 25% of charge, the fast charge advertisement says 1 hour and 20 minutes (charge fast???????).... if i use a normal charger (not fast), the time goes to 1 hour and 31 minutes. this phone has a charge fast but very low fast
andygold said:
Of the 2 Qi pads you mention, any preferences towards one or the other (or a different one altogether)? I have an Anker QC 3.0 charger I can connect up to it.
BTW.. I cannot locate a 15W Ravpower pad. What model is it? And is the Umdigi a model Q1?
Click to expand...
Click to collapse
I know it's hard from a specs perspective as most are only 75% efficient so the 10w might only be 7.5w and 15w is actually 10w, which is why LG customer services expressly states you must use a 15w QI charger for fast wireless charging. Another problem is the specs aren't always accurate and updated devices might still have old specs listed. I tried a bunch before I found a couple I liked. The mophie streampad+ also does fast wireless charging but is listed as 10w.
The RavPower is a standup charger I use in the office, the other UmDigi chargers I have scattered around the house and in the bedroom.
RavPower: https://www.amazon.com/gp/product/B079C1QLCR
UmDigi: https://www.amazon.com/gp/product/B07DJ56LT5
Did a little charge test from 50 percent
Wireless charger =1h 40m
Stock iPhone charger =1h 14m
Both pixel USB C to C and stock fast charger =1h 2m
I'm in the market for a qi charger that can fast charge my Thinq g7. I see reports of needing 15W but not seeing many out there that have that spec.
I have seen a RavPower one posted here that is said to do it but the price is quite high for that model. Does anyone else have experience with fast charging the thinq g7 with a Qi charger?
I have Samsung Fast wireless charger. This present with S7. Fast charging battery of S7 Edge, S9+. But G7 didn't support fast wireless charging. And charging is slow. So you can buy what you want but charging with this phone will be slow.
I read this topic and wondering how G7 is going to wireless fast charge?
Sent from my LM-G710
Just thought I'd add to this - the charger that comes with the LG G7 ThinQ (Verizon) is labeled with outputs 9V/1.8A and 5V/1.8A. My old HTC 10 charger is labeled 12V/1.25A, 9V/1.7A, 5V/2.5A. I haven't tried it on the HTC 10's charger on a measuring device to see actual power delivery, but at least on the face of it, if it supports those higher voltages and/or amps, you should be able to get faster charging than with the charger out of the box.
On the other hand, faster charging may in part be why the HTC 10's battery lifetime is dismal, and not once have I thought "boy I wish my G7 would charge faster".
Anyone tried qc4.0 ?
According to some sites ThinQ is capable of 27W (9x3) charging. I therefore purchased a Xiaomi 65W charger which outputs 9x3 but the phone charges only with 15W (5x3) so wasted money.
Yes. I bought 3 different chargers and also a watt meter. When charging with screen on max amps is 1A and 6-8wattage. When screen is off it goes up to max 16watt. And it doesnt matter which charger i use.
80min for a full chsrge isnt that good. But think that lg g7 released in 2018?
Vivos IC00 something charges full in 20min. 4000mAh.
Im sick of "..reduced charging speed cause it can in a long term reduce battery......" who gives..? Then if you notice a different is gonna take 3 years and if still got same phone. Switch battery.
Look at Tesla batteries whos battery lost like 10 percent after 30000 km. I mean..come on
Im on 72% now and it says 45min to full.
A specialised site reported it would charge at 27W (9V x 3A) but this is simply not true. The best it can charge is 15W (5V x 3A). Thats it.