LG G3 Kernel Panic? - G3 Q&A, Help & Troubleshooting

What can I do to revive my cellphone?
It's an LG G3 D855p
-----------------------------------------------------------------------------------------------------------------
DemiGod Crash Handler : Kernel Crash! :
Press key to choose Dload Mode/Reboot
1)Volume Up: Dload Mode.
2) Volume Down: Reboot.
If you choose Dload Mode,
Please do following action.
1)Dload Mode. Please connect USB
2) Get the ram dump image using QCT's Memory Debug App
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000b
------------------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse

Press voldown button for a second and it should reboot.
When did this start happening and your software version, if possible?

myclarity said:
Press voldown button for a second and it should reboot.
When did this start happening and your software version, if possible?
Click to expand...
Click to collapse
It cannot enter download mode, recovery mode or boot into system. The only screen is this. Even if I try to press the buttons.
It started when I was trying to flash via box.
I think that maybe my EMMC gone bad.
It was in the v30f version.

Related

Stuck on LG logo after FreeGee

I can't figure out how to fix the phone, it is stuck on the LG logo...
TurboTronix said:
I can't figure out how to fix the phone, it is stuck on the LG logo...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2082084
Got it fixed did the following:
1) press Vol down + Power (powers off the phone)
2) press Vol down + Vol up and insert the USB cable to PC while still pressing (download mode)
3) used KDZ_FW_UPD_EN and installed latest kdz file.
All is working now...
Plz helppp
TurboTronix said:
Got it fixed did the following:
1) press Vol down + Power (powers off the phone)
2) press Vol down + Vol up and insert the USB cable to PC while still pressing (download mode)
3) used KDZ_FW_UPD_EN and installed latest kdz file.
All is working now...
Click to expand...
Click to collapse
how did you get the KDZ, when i download the file its in the .cab format?
You can find the KDZ files here:
http://forum.xda-developers.com/showthread.php?t=2196742

Bricked after flashing MM (Detected for 5 seconds as Moorefield and disappears)

Hello guys, i'm trying to unbrick my phone, i'm following this guide http://forum.xda-developers.com/zenfone2/general/guide-fix-bricked-ze550ml-ze551ml-usb-t3405840 but when i get to the end of te install of intelSoC my device is detected as Moorefield for like 4-5 seconds and then it disappears. I've been trying to solve this for like 4 hours now, a little help would be much appreciated.
Fede2797 said:
Hello guys, i'm trying to unbrick my phone, i'm following this guide http://forum.xda-developers.com/zenfone2/general/guide-fix-bricked-ze550ml-ze551ml-usb-t3405840 but when i get to the end of te install of intelSoC my device is detected as Moorefield for like 4-5 seconds and then it disappears. I've been trying to solve this for like 4 hours now, a little help would be much appreciated.
Click to expand...
Click to collapse
in xFSTK option menu in gp flag override value put 0x80000807 instead of 0x800000807
tick enable gp flag override
change device detection time out to 120
click okay, and press power button for 20 second make sure it powers down now click power button and volume down button. as phone vibrates or computer makes detection sound. release power button but keep holding volume down button. begin download and do nothing untill it gives ok
if you are unable to flash raw firmware after geting fastboot do following steps after 2nd step, don't use asus flash tool
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
sukhwant717 said:
in xFSTK option menu in gp flag override value put 0x80000807 instead of 0x800000807
tick enable gp flag override
change device detection time out to 120
click okay, and press power button for 20 second make sure it powers down now click power button and volume down button. as phone vibrates or computer makes detection sound. release power button but keep holding volume down button. begin download and do nothing untill it gives ok
if you are unable to flash raw firmware after geting fastboot do following steps after 2nd step, don't use asus flash tool
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Click to expand...
Click to collapse
Thanks man, i solved it. I was trying to use flash tool but it doesn't work, i'm gonna try with your solution.
-------------------------------------------
I finally did it! Thank you so much. One last question, do you know how can i flash a recovery? Because when i go to the recovery it appears "error" and that android guy.. if possible a stock recovery so i can upgrade to 6.0
Fede2797 said:
Thanks man, i solved it. I was trying to use flash tool but it doesn't work, i'm gonna try with your solution.
-------------------------------------------
I finally did it! Thank you so much. One last question, do you know how can i flash a recovery? Because when i go to the recovery it appears "error" and that android guy.. if possible a stock recovery so i can upgrade to 6.0
Click to expand...
Click to collapse
You already have stock recovery
Whenever the Android guy with ERROR shows, press and hold the power button for 1 sec and then while holding it, press the volume up button. It will bring out all the recovery options. Cheers...
Thanks, worked for me too ! (just i used volume up + power instead of volume down).

DemiGod crash.. Phone bricked??

I was using my phone normally, suddenly bluescreen came.
The error message was
:
GreenScreen Error Message
----------------------------------------*-------
HW Reset!
----------------------------------------*-------
DEmiGod Crash Handler : HW Reset!
Press key to choose Dload Mode or Reboot.
1) Volume Up : Dload Mode.
2) Volume Down : Reboot.
If you choose Dload Mode,
Please do following action.
1) Dload Mode. Please connect USB.
2) Get the ram dump image using QPST Configuration.
I cant enter recovery nor the Download mode sticks. So i cant flash either any rom nor the stock KDZ via LGFlashTool.
Please suggest something guys.

lg k10 stopped in bootloop says kernel crash

Kernel Crash
--------------------------------------------------------------------
DemiGod Crash Handler : Kernel Crash
Press Key to chose Dload or Reboot.
1) Volume Up : Dload Mode.
2) Volume Down : Reboot.
If you choose Dload Mode,
Please do the following action,
1) Dload mode, Please connect USB
2) Got the ram dump image using QPST Configuration.
I have tried several methods to solve this issue but not able to find any solution my phone is not going in download mode as well as recovery mode

LG G3 can't REACH BOOTLOADER

Hi Guys
the problem is my LG G3 device
cant mount datal/storage in #TWRP
and show 0MB of internal storage
when I try to boot into #BOOTLOADER it show download mod
then screen go black
Pls is there any solution :crying::crying::crying::crying:
3mmori said:
Hi Guys
the problem is my LG G3 device
cant mount datal/storage in #TWRP
and show 0MB of internal storage
when I try to boot into #BOOTLOADER it show download mod
then screen go black
Pls is there any solution :crying::crying::crying::crying:
Click to expand...
Click to collapse
I have the same problem
3mmori said:
Hi Guys
the problem is my LG G3 device
cant mount datal/storage in #TWRP
and show 0MB of internal storage
when I try to boot into #BOOTLOADER it show download mod
then screen go black
Pls is there any solution :crying::crying::crying::crying:
Click to expand...
Click to collapse
Have you tried factory resetting outside twrp?
Try powering up the device holding both power and volume down.
When the LG logo appears let go.
Then immediately hold power and volume down again
tomb20 said:
Have you tried factory resetting outside twrp?
Try powering up the device holding both power and volume down.
When the LG logo appears let go.
Then immediately hold power and volume down again
Click to expand...
Click to collapse
Yeah it go to kernel crash
i did with boarddiag 2.99a
tomb20 said:
Have you tried factory resetting outside twrp?
Try powering up the device holding both power and volume down.
When the LG logo appears let go.
Then immediately hold power and volume down again
Click to expand...
Click to collapse
then show
Kernel Crash
--------------------------------------------------------------------
DemiGod Crash Handler : Kernel Crash
Press Key to chose Dload or Reboot.
1) Volume Up : Dload Mode.
2) Volume Down : Reboot.
If you choose Dload Mode,
Please do the following action,
1) Dload mode, Please connect USB
2) Got the ram dump image using QPST Configuration.
--------------------------------------------------------------------
Board Info
rev. : 1.0 speed,pvs : 3.0 serial 0d3823132d08e09a
--------------------------------------------------------------------
Kernel Panic - not syncing: Out of memory and no killable processes...
3mmori said:
then show
Kernel Crash
--------------------------------------------------------------------
DemiGod Crash Handler : Kernel Crash
Press Key to chose Dload or Reboot.
1) Volume Up : Dload Mode.
2) Volume Down : Reboot.
If you choose Dload Mode,
Please do the following action,
1) Dload mode, Please connect USB
2) Got the ram dump image using QPST Configuration.
--------------------------------------------------------------------
Board Info
rev. : 1.0 speed,pvs : 3.0 serial 0d3823132d08e09a
--------------------------------------------------------------------
Kernel Panic - not syncing: Out of memory and no killable processes...
Click to expand...
Click to collapse
If you go to Dload mode does it work? Try using Dload mode to flash stock. Look for a return to stock guide on xda
tomb20 said:
If you go to Dload mode does it work? Try using Dload mode to flash stock. Look for a return to stock guide on xda
Click to expand...
Click to collapse
It won't show in LG UP and LG FLASH TOOL
won't show model of device when I use Dload
3mmori said:
It won't show in LG UP and LG FLASH TOOL
won't show model of device when I use Dload
Click to expand...
Click to collapse
Don't know then sorry. Could be hard bricked.

Categories

Resources