Develop Bugs

[Q] fastboot LT26i

Hi, I am here in flashing phones newbie, so sorry in advance. I have LT26i original stock firmware. And I would like to use android 4.2.2 (because waiting for official firmware is unbelivieble). So I found some instructions how can I do it.
first root,then unlock bootloader,then install CWM and then install firmware
Root is done, I think that my unlock is already done too , but without my working on it. Because if I press *#*#7378423#*#* and then Service info--->Configuration I see this: Bootloader unlocked yes.
Next if I want to install cwm I do not know how, beacuase I cant go into fastboot. If I use combination switch on+volume up in same time as I plug USB cabel in device manager appear nothing new. (I am using win8 and UsB debuging is enabled). And a situation is if i press all , is short one vibration then 3 short vibration, logo Sony and it is repeating if I hold all,
what is a issue?
thank you very much

medacek said:
Hi, I am here in flashing phones newbie, so sorry in advance. I have LT26i original stock firmware. And I would like to use android 4.2.2 (because waiting for official firmware is unbelivieble). So I found some instructions how can I do it.
first root,then unlock bootloader,then install CWM and then install firmware
Root is done, I think that my unlock is already done too , but without my working on it. Because if I press *#*#7378423#*#* and then Service info--->Configuration I see this: Bootloader unlocked yes.
Next if I want to install cwm I do not know how, beacuase I cant go into fastboot. If I use combination switch on+volume up in same time as I plug USB cabel in device manager appear nothing new. (I am using win8 and UsB debuging is enabled). And a situation is if i press all , is short one vibration then 3 short vibration, logo Sony and it is repeating if I hold all,
what is a issue?
thank you very much
Click to expand...
Click to collapse
Hello I'd really like to help you out with this,
Installing CWM is very easy on Xperia S
All You Have to Do is,
Download And Run RecoverX Link --> http://forum.xda-developers.com/showthread.php?t=1773227
Just Download This Software from Here. --> http://ledelete.shost.ca/recoverx/download.html
Here is a video Tutorial---> .http://www.youtube.com/watch?feature=player_embedded&v=5HbXSfYCxFg
This is the easiest way to install recovery like installing a game.
Please Go Through The Video Link It would help much More!
Regards,
dwarkesh2492

I used first posibility to instal cwm, ind it is working for me. now i have questions.
1. is my or has my phone unlocked bootloader?
2. which firmware is the best to use?
3. how install step by step a firmware?
4. something important what I need to know?
5 what fastboot? and how Can I activate it?
please and thank you very much for your previous help
PS: Do you think that is good idea download the lastest firmware from this and gapps and install it
slimroms.net/index.php/283
and before it do all types of wipe?
thanks for answers

medacek said:
I used first posibility to instal cwm, ind it is working for me. now i have questions.
1. is my or has my phone unlocked bootloader?
2. which firmware is the best to use?
3. how install step by step a firmware?
4. something important what I need to know?
5 what fastboot? and how Can I activate it?
please and thank you very much for your previous help
PS: Do you think that is good idea download the lastest firmware from this and gapps and install it
slimroms.net/index.php/283
and before it do all types of wipe?
thanks for answers
Click to expand...
Click to collapse
Hello madacek,
I wish I could help you out with all the questions,
But just explaning them will not be sufficient.
This requires lot of reading the forum and learn the basics of flashing in installing roms.
But I'd try to explain you the best as possible.
1. Is Your Phone Bootloader Unlocked?
Dial *#*#7378423#*#* . Then go to -> "Service Info" -> "Configuration". If there is:
Bootloader unlock allowed - Yes << this means that your Bootloader is Locked
Bootloader Unlocked - Yes << this means that your bootloader is unlocked
2. Which Firmware?
Well Actually Every Firmware from Are Very Amazing Developers are Great To Use.
What matters is, Is the firmware stable or not?
Developers Publish 3 Types of Firmwares.
- Nightly Builds : Generally published every week or so for developing perpose
- Monthly Builds : Much Stable Then Nightly.
- Beta Versions : Most Stable.
These may vary depending on developers,
There are a lot of Custom Roms for Xperia. And every one of them is Unique And Great.
List of ROMS for Xperia S is Given Here.. ---> http://forum.xda-developers.com/showthread.php?t=1950706
3 How To Instal Firmware.
First of All.
You need to know What problems You can have if You are not flashing Step by Step.
Soft Brick -- Flashing was Not Proper
Hard Brick -- If an any case your phone shuts down during flash.
Bootloops -- This is when your phone goes on doing a same repetitive boot again and again. (Possible Fix - FLash boot.img in downloaded rom zip via FLashtool)
Now Step by Step Process. :
1.Device Unlocking
All info regarding unlocking procedure is on SONY website
http://unlockbootloader.sonymobile.com/
2.Copy update on phone
a.copy update
copy update-xxx-xxx-xxx.zip coresponding to your device to sdcard
b.copy GAPPS
due to legal rules gapps are not provided into main rom
google for gapps package and copy on sdcard
3.Flash CM kernel
a. extract boot.img from zip file
Plugin The Device To FLASHTOOLS on PC
And Follow These Instructions ---> http://forum.xda-developers.com/showthread.php?t=1963961
4.Boot into recovery
While FXP logo is displayed (and lights are lit) press several times volume up to enter CWM (recovery)
5.Flash ROM
To update main rom select
a.Install zip from sdcard
b.choose zip from sdcard
c.select your update (copied at step 2)
To flash gapps redo steps a-c and select gapps package
!!! use gapps version designed for your android version !!!
6.Wipe device
!!! if after boot you experience ForceClose then is recommend to reboot to recovery and wipe device
7.Partition format
Is not recommended to format your partitions unless you are advised to do otherwise
8.Reboot and Enjoy
4 Something Important You Need To Know
Do Not Panic. Your phone will not Brick Until You do Something Crazy Like Throwing The phone on wall while Flashing or Plug out the USB when everything is Flashing fine. This requires patience and time. Dont freak out or do something crazy.
5.What is Fastboot?
There are two types of Boot,
Flashmode Boot.
And
Fastboot.
Flashmode is generally used for official stock firmware flashing.
Fastboot is used by developers to flash custom ROMS.
You can go into
Flashmode by Pressing Volume Up Button While Connecting Usb into PC before Starting A Flash
Fastboot by Pressing Volume Down Button While Connecting Usb into PC before Starting A Flash
Slim ROM Its really nice ROM actually And I Have Used The Slim Bean Build 5 Nozomi for a long time now. But currently on CM10 Team FXP. TeamFreeXperia are very professional and release stable builds, So i'd advice you to try one of CM10.
link ---> https://sites.google.com/site/projectfreexperia/‎
I hope this helps, feel free to ask any doubts and questions.
Regards,
Dwarkesh

thank you very much for your big help....but i Did everything acording to instruction, and flash firmware and then gapps and then reboot and now I am waiting, on a screen is logo Sony still, already 10 minutes. So i did hardreset by volume up and switch off, phone switched off, then blick pink led and now is there again only logo Sony
I tried this
[ To enter recovery keep pressing VOLUME UP button AFTER u see the "PINK" LED at bootup (Sony logo) ]
and now i am in CWM touchv6.0.3.1

i tried it again flash it and now it is working but i think that i ll try other, tahnks

@medacek tried it again flash it and now it is working but i think that i ll try other, tahnks
Click to expand...
Click to collapse
I'm Glad To Know That,
If you have further questions and doubts feel free to ask anything.
Regards,
~Dwarkesh
PS : Help me by Pressing the Thanks Button if I could help you in anyway/ if you like my work/ If this post was informative for you to learn and understand.
---------- Post added at 05:14 PM ---------- Previous post was at 05:09 PM ----------
medacek said:
i tried it again flash it and now it is working but i think that i ll try other, tahnks
Click to expand...
Click to collapse
You are welcome!
---------- Post added at 05:27 PM ---------- Previous post was at 05:14 PM ----------
medacek said:
Hi, I am here in flashing phones newbie, so sorry in advance. I have LT26i original stock firmware. And I would like to use android 4.2.2 (because waiting for official firmware is unbelivieble). So I found some instructions how can I do it.
first root,then unlock bootloader,then install CWM and then install firmware
Root is done, I think that my unlock is already done too , but without my working on it. Because if I press *#*#7378423#*#* and then Service info--->Configuration I see this: Bootloader unlocked yes.
Next if I want to install cwm I do not know how, beacuase I cant go into fastboot. If I use combination switch on+volume up in same time as I plug USB cabel in device manager appear nothing new. (I am using win8 and UsB debuging is enabled). And a situation is if i press all , is short one vibration then 3 short vibration, logo Sony and it is repeating if I hold all,
what is a issue?
thank you very much
Click to expand...
Click to collapse
A Word of little advice.
SOFT RESET = 1 vibration then let go of buttons (hold about 3 seconds); Like hitting REBOOT.
HARD RESET = 3 vibrations then let go (about 10 seconds); Like taking out the battery.*
*USE HARD RESET ONLY IF ALL OTHER TRICKS HAVE FAILED. RECOVERY FROM THIS DEEP LEVEL OF SOFT-BRICK WILL TAKE A LONG TIME
Hard Reset Not Advisable @ First Attepmt

answer
Thank you very much, everything was working great. But now I would like to solve other flashing in other thread. My question is how can i close this thread as solved?

Few questions Regarding ZL modding/Flashing

Hi,my first post at xperia !!!
I am new at the Xperia modding but old from Galaxy s-1,2,3 etc.
I have these Queries to make things clear:
My phone came with 10.1.A.1.434
I un locked my bootlader and rooted with recovery exactly fine from the forums guides.
My question is If I flash the new updated rom, my root will be removed for sure, and also the bootloader will be re locked?
And If that happens, how can I root my phone again since there is no official CWM updated yet?
waiting for your reply guys

angry_machine said:
Hi,my first post at xperia !!!
I am new at the Xperia modding but old from Galaxy s-1,2,3 etc.
I have these Queries to make things clear:
My phone came with 10.1.A.1.434
I un locked my bootlader and rooted with recovery exactly fine from the forums guides.
My question is If I flash the new updated rom, my root will be removed for sure, and also the bootloader will be re locked?
And If that happens, how can I root my phone again since there is no official CWM updated yet?
waiting for your reply guys
Click to expand...
Click to collapse
Can't really say for sure about the bootloader since I haven't unlocked mine, but the root will be removed if you flash a new updated firmware through Flashtools (happened to me when I updated the original .434 with the .423 - with a full wipe - and when I flashed the brazilian .423 over the middle eastern/asian .423 without the full wipe).
My guess is that the bootloader with be re-locked when you flash the ftf with Flashtools, but you can unlock it again with Flashtools itself.
First, you'll need to use DoomLord's easy root tool (v15 worked for me with the .423 firmware, so my guess is that v17 should work as well). Then you can flash the dual TWRP/CWM and unlock the bootloader again.
Best regards.

Tiu Fiu said:
Can't really say for sure about the bootloader since I haven't unlocked mine, but the root will be removed if you flash a new updated firmware through Flashtools (happened to me when I updated the original .434 with the .423 - with a full wipe - and when I flashed the brazilian .423 over the middle eastern/asian .423 without the full wipe).
My guess is that the bootloader with be re-locked when you flash the ftf with Flashtools, but you can unlock it again with Flashtools itself.
First, you'll need to use DoomLord's easy root tool (v15 worked for me with the .423 firmware, so my guess is that v17 should work as well). Then you can flash the dual TWRP/CWM and unlock the bootloader again.
Best regards.
Click to expand...
Click to collapse
in this case do I just press the Flashtools unlock button or use the CMD ?
Also you are talking about this for Twrp right? http://forum.xda-developers.com/showthread.php?t=2225231

angry_machine said:
in this case do I just press the Flashtools unlock button or use the CMD ?
Also you are talking about this for Twrp right? http://forum.xda-developers.com/showthread.php?t=2225231
Click to expand...
Click to collapse
Actually, I was talking about this one: http://forum.xda-developers.com/showthread.php?t=2288118
Includes both TWRP & CWM. And I guess you can unlock the bootloader using the Flashtools button on 4.2.2 stock firmware, but I'm not 100% sure (again, I've opted to stick with my locked bootloader for now)

Tiu Fiu said:
Actually, I was talking about this one: http://forum.xda-developers.com/showthread.php?t=2288118
Includes both TWRP & CWM. And I guess you can unlock the bootloader using the Flashtools button on 4.2.2 stock firmware, but I'm not 100% sure (again, I've opted to stick with my locked bootloader for now)
Click to expand...
Click to collapse
Just one more question before I try, for this I keep on pressing repeating the volume up button just like cwm to enter the boot?

angry_machine said:
Just one more question before I try, for this I keep on pressing repeating the volume up button just like cwm to enter the boot?
Click to expand...
Click to collapse
When booting, after the initial Sony logo, when the notification led shows up in green you have 3 choices:
- press and hold the volume up button until the notification light turns purple to access CWM recovery;
- press and hold the volume down button until the notification light turns purple to access TWRP recovery; or
- don't press anything to boot normally (should be 3 or so seconds until the notification led turns off).
And that's it...

Tiu Fiu said:
When booting, after the initial Sony logo, when the notification led shows up in green you have 3 choices:
- press and hold the volume up button until the notification light turns purple to access CWM recovery;
- press and hold the volume down button until the notification light turns purple to access TWRP recovery; or
- don't press anything to boot normally (should be 3 or so seconds until the notification led turns off).
And that's it...
Click to expand...
Click to collapse
Done everything right. Good thing is my Bootloader has not relocked, Time to go some custom roms I guess.
THANKS A LOT FOR YOUR RESPONSES. loving my way back after such a long time since the early p1i.

{How To}[Root][Recovery] Everything For Micromax Canvas Fire 2 (A104) KitKat Based

""As my Dev brothers said earlier, "BOND comes with bang". So giving respect to all of my dev brothers and starting this new thread.""
Lets first start with the very known thing of MTK devices. So these things are common in all MTK:-
1)
Code:
[URL="http://www.mediafire.com/download/kmt3bjcga3pyymf/SP_Flash_Tool_exe_v3.1344.0.212.rar"]SP Flash Tool (For flashing any MTK Device)[/URL]
2)
Code:
[URL="http://www.mediafire.com/download/3q679a2jelhcumc/UPDATE-SuperSU-v1.94.zip"]Super-User Update (Rooting zip, flashable in custom recovery)[/URL]
3)
Code:
MTK Preloader USB VCom Driver (Search on google, there are many)
Brothers,
1) is basically used by us for flashing custom recovery, boot, or factory firmware, if anything goes wrong.
2) is used for rooting a ROM, may its Kitkat or Jellybean.
3) is used for flashing through sp flash tool
PRE-Requisite:-
1) Normal Human Brain. [Must, Don't even try without it]
2) Patience [Again a must have thing.]
3) MTK Preloader USB VCom driver installed on your PC.:good:
4) Recovery Utility for Canvas Fire 2 A104 [Download this]:good:
5) Stock Firmware of Canvas Fire 2 A104 [Download this as a precaution]:good:
6) Heart & Money. {If everything goes wrong and nothing works, then heart to bear the blame and money to buy a new phone.
Now Procedure for rooting MT6582M based Micromax Canvas Fire 2 A104:-
a) Download SP Flash tool and also download the recovery utility.
b) Extract both somewhere on your pc but not out side "C/" drive.
c) Open Flash tool and click on scatter loading.
d) Select scatter loading "MT6582_Android_scatter" from recovery utility folder.
e) Now De-select everything other than recovery and boot in the flashtool.
f) Make sure only recovery & boot is selected in flashtool then click Download button.
g) Now connect your fire 2 (without battery) to your pc.
h) Let the process complete. After this disconnect your phone and press Volume up(+) and Power Button for
booting in to recovery.
i) In recovery choose zip "Update SuperUser zip" and flash it and voila.
You have got root and one of the best custom recovery "Phillz Touch based recovery" on your fire 2. Now start firing and enjoy.
Screenshot Given for reference of "Phillz Recovery".
Disclaimer:-
If anything goes wrong, and nothing is there left to make your phone come back, then neither me nor XDA nor my dev brothers are responsible for this. You are the person who have chosen to do this to your device and so you're the responsible person for this. So please do responsibly and enjoy boldly.

"First of all a big THANKS to all my dev brothers who ported 4.2 to MT6577. You guys genuinely has made a history in MediaTek Device forums."
A Big Thanks to Master @yuweng, for his awesome services and threads for mediatek. Its been a light of guidance for devs.
A Special Thanks to Master @phillz, for devoting time and creating recovery modules for Meditek Devices. The Phillz recovery has been the most famous and wonderful custom recovery.
Special Thanks to "Micromax" for making so many devices with same specs but different boots and all.
Special Thanks to XDA & Droid-Devz for giving me platforms for presenting my works and XDA been my school where I learned Android.
Special Thanks to my wife for bearing my non-sense jokes and being my partner in everything I do or will do.
Special Thanks to all those brothers who trusted me and still using my MODs and my ROMs.

Thanks For This Dude
Hope you all will see a rom For this device by me

ICS_XD said:
Thanks For This Dude
Hope you all will see a rom For this device by me
Click to expand...
Click to collapse
Sir,
I will wait for your ROM, Still using Neat ROM on my S2. Will wait even longer if its going to be a series of Neat ROM for Micromax A104.

Welcome back stranger ...
Regards

SuperDroid-BOND said:
Sir,
I will wait for your ROM, Still using Neat ROM on my S2. Will wait even longer if its going to be a series of Neat ROM for Micromax A104.
Click to expand...
Click to collapse
Mate No It wont be Neat Rom
It will have a New name
Just wait for it

ICS_XD said:
Mate No It wont be Neat Rom
It will have a New name
Just wait for it
Click to expand...
Click to collapse
Sir,
If its not a series of Neat Rom then also its fine because the Dev for both will be same...
Still I'll wait for getting this on my phone.
Sent from my LG-F240L using Tapatalk

reply fast sir
SuperDroid-BOND said:
""As my Dev brothers said earlier, "BOND comes with bang". So giving respect to all of my dev brothers and starting this new thread.""
Lets first start with the very known thing of MTK devices. So these things are common in all MTK:-
1)
Code:
[URL="http://www.mediafire.com/download/kmt3bjcga3pyymf/SP_Flash_Tool_exe_v3.1344.0.212.rar"]SP Flash Tool (For flashing any MTK Device)[/URL]
2)
Code:
[URL="http://www.mediafire.com/download/3q679a2jelhcumc/UPDATE-SuperSU-v1.94.zip"]Super-User Update (Rooting zip, flashable in custom recovery)[/URL]
3)
Code:
MTK Preloader USB VCom Driver (Search on google, there are many)
Brothers,
1) is basically used by us for flashing custom recovery, boot, or factory firmware, if anything goes wrong.
2) is used for rooting a ROM, may its Kitkat or Jellybean.
3) is used for flashing through sp flash tool
PRE-Requisite:-
1) Normal Human Brain. [Must, Don't even try without it]
2) Patience [Again a must have thing.]
3) MTK Preloader USB VCom driver installed on your PC.:good:
4) Recovery Utility for Canvas Fire 2 A104 [Download this]:good:
5) Stock Firmware of Canvas Fire 2 A104 [Download this as a precaution]:good:
6) Heart & Money. {If everything goes wrong and nothing works, then heart to bear the blame and money to buy a new phone.
Now Procedure for rooting MT6582M based Micromax Canvas Fire 2 A104:-
a) Download SP Flash tool and also download the recovery utility.
b) Extract both somewhere on your pc but not out side "C/" drive.
c) Open Flash tool and click on scatter loading.
d) Select scatter loading "MT6582_Android_scatter" from recovery utility folder.
e) Now De-select everything other than recovery and boot in the flashtool.
f) Make sure only recovery & boot is selected in flashtool then click Download button.
g) Now connect your fire 2 (without battery) to your pc.
h) Let the process complete. After this disconnect your phone and press Volume up(+) and Power Button for
booting in to recovery.
i) In recovery choose zip "Update SuperUser zip" and flash it and voila.
You have got root and one of the best custom recovery "Phillz Touch based recovery" on your fire 2. Now start firing and enjoy.
Screenshot Given for reference of "Phillz Recovery".
Disclaimer:-
If anything goes wrong, and nothing is there left to make your phone come back, then neither me nor XDA nor my dev brothers are responsible for this. You are the person who have chosen to do this to your device and so you're the responsible person for this. So please do responsibly and enjoy boldly.
Click to expand...
Click to collapse
sir is it work on Micromax fire a093 ?? its worked on fire a104..

FROM_HEAVEN said:
sir is it work on Micromax fire a093 ?? its worked on fire a104..
Click to expand...
Click to collapse
Brother,
First thing first that please don't quote the whole OP, its very long and consume much space. Now brother I don't know that its working for A093 or not as I don't have the device and now I have also sold the A104. Try it but before trying download the whole stock firmware of A093, so that if it fails you can get back to its original position.
Regards
BOND

bro i tried it but its failed on a093 but thanks for stock rom suggestion i manage to get back my devive now bro create a method for Micromax fire a093 i am waiting for this too long

Guys thanks for this awesome recovery and root method but one thing my titanium app not restoring apps and can't take up backup and it shows interrupted error....this happens after root with super su but works well on kinguser app....why it happens guys any solution? Thanks
Sent from my Micromax A104 using XDA Free mobile app

SuperDroid-BOND said:
Sir,
I will wait for your ROM, Still using Neat ROM on my S2. Will wait even longer if its going to be a series of Neat ROM for Micromax A104.
Click to expand...
Click to collapse
Hi man,
I did the whole procedure properly and the top half of my phone screen is inverted.. Not the display, but the touch only.. I must touch the center of the screen to pull down the status bar.. (Know what I mean?) I can't seem to fix the issue.. I tried flashing stock recovery.img, didn't work. Tried stock rom, didn't work. Did a full wipe too.. I'm not blaming you, I just need your help.. Any idea why that happened or how to fix it?

branndonn1 said:
Hi man,
I did the whole procedure properly and the top half of my phone screen is inverted.. Not the display, but the touch only.. I must touch the center of the screen to pull down the status bar.. (Know what I mean?) I can't seem to fix the issue.. I tried flashing stock recovery.img, didn't work. Tried stock rom, didn't work. Did a full wipe too.. I'm not blaming you, I just need your help.. Any idea why that happened or how to fix it?
Click to expand...
Click to collapse
I got the same issue. Looks like the provided boot.img wasnt meant for the device we have. I am also trying to fix this. Will update if it gets fixed.
---------- Post added at 08:51 PM ---------- Previous post was at 08:02 PM ----------
branndonn1 said:
Hi man,
I did the whole procedure properly and the top half of my phone screen is inverted.. Not the display, but the touch only.. I must touch the center of the screen to pull down the status bar.. (Know what I mean?) I can't seem to fix the issue.. I tried flashing stock recovery.img, didn't work. Tried stock rom, didn't work. Did a full wipe too.. I'm not blaming you, I just need your help.. Any idea why that happened or how to fix it?
Click to expand...
Click to collapse
Hey, Just in case you are still having that issue. I figured out the cause. Its because of the boot.img we flashed. The new hardware components used in our phones are not compatible with the old boot.img we flashed, which is supposed to be of earlier Firmware version. Please download the package below and flash it.
http://clicknupload.com/xdpt8n2w3oho
I assume that you must had already flashed the complete old firmware, you need to flash this new firmware. I havnt flashed old FW so just flashed the new boot.img of this package and the problem is solved.
This is a request to the thread owner to please mention this in OP that the users with V8.1 (can be checked in Settings >> About Phone >> Build Number) should uncheck boot while flashing, however it will cause same inverted touch issue in recovery but it can be managed with the volume buttons anyways.

branndonn1 said:
Hi man,
I did the whole procedure properly and the top half of my phone screen is inverted.. Not the display, but the touch only.. I must touch the center of the screen to pull down the status bar.. (Know what I mean?) I can't seem to fix the issue.. I tried flashing stock recovery.img, didn't work. Tried stock rom, didn't work. Did a full wipe too.. I'm not blaming you, I just need your help.. Any idea why that happened or how to fix it?
Click to expand...
Click to collapse
EnDLessssS said:
I got the same issue. Looks like the provided boot.img wasnt meant for the device we have. I am also trying to fix this. Will update if it gets fixed.
---------- Post added at 08:51 PM ---------- Previous post was at 08:02 PM ----------
Hey, Just in case you are still having that issue. I figured out the cause. Its because of the boot.img we flashed. The new hardware components used in our phones are not compatible with the old boot.img we flashed, which is supposed to be of earlier Firmware version. Please download the package below and flash it.
http://clicknupload.com/xdpt8n2w3oho
I assume that you must had already flashed the complete old firmware, you need to flash this new firmware. I havnt flashed old FW so just flashed the new boot.img of this package and the problem is solved.
This is a request to the thread owner to please mention this in OP that the users with V8.1 (can be checked in Settings >> About Phone >> Build Number) should uncheck boot while flashing, however it will cause same inverted touch issue in recovery but it can be managed with the volume buttons anyways.
Click to expand...
Click to collapse
Brothers,
When I bought this device then I downloaded it and made the rooting n recovery guide after testing it for three times on my device. If later the oem has changed anything in firmware then I'm sorry but I cannot update it as now I don't have this device anymore. If you want recovery for this device then please uploaded your boot.img from latest firmware and I'll make a recovery for you but after 7 days from now. currently busy in funeral of my Grandma.
Thanks & Regards
BOND
Sent From:-
""The Little Beast of XIAOMI""

SuperDroid-BOND said:
Brothers,
When I bought this device then I downloaded it and made the rooting n recovery guide after testing it for three times on my device. If later the oem has changed anything in firmware then I'm sorry but I cannot update it as now I don't have this device anymore. If you want recovery for this device then please uploaded your boot.img from latest firmware and I'll make a recovery for you but after 7 days from now. currently busy in funeral of my Grandma.
Thanks & Regards
BOND
Sent From:-
""The Little Beast of XIAOMI""
Click to expand...
Click to collapse
Hi Bond,
Never mind it. You can just put this info in your opening post for now. Also, here i am attaching the new boot.img. As per the release notes, this version is backward compatible.
Thanks

After flashing the boot.img inverted touch fixed.all goes right.but in charging animation(switch off) are still inverted

SuperDroid-BOND said:
""As my Dev brothers said earlier, "BOND comes with bang". So giving respect to all of my dev brothers and starting this new thread.""
Lets first start with the very known thing of MTK devices. So these things are common in all MTK:-
1)
Code:
[URL="http://www.mediafire.com/download/kmt3bjcga3pyymf/SP_Flash_Tool_exe_v3.1344.0.212.rar"]SP Flash Tool (For flashing any MTK Device)[/URL]
2)
Code:
[URL="http://www.mediafire.com/download/3q679a2jelhcumc/UPDATE-SuperSU-v1.94.zip"]Super-User Update (Rooting zip, flashable in custom recovery)[/URL]
3)
Code:
MTK Preloader USB VCom Driver (Search on google, there are many)
Brothers,
1) is basically used by us for flashing custom recovery, boot, or factory firmware, if anything goes wrong.
2) is used for rooting a ROM, may its Kitkat or Jellybean.
3) is used for flashing through sp flash tool
PRE-Requisite:-
1) Normal Human Brain. [Must, Don't even try without it]
2) Patience [Again a must have thing.]
3) MTK Preloader USB VCom driver installed on your PC.:good:
4) Recovery Utility for Canvas Fire 2 A104 [Download this]:good:
5) Stock Firmware of Canvas Fire 2 A104 [Download this as a precaution]:good:
6) Heart & Money. {If everything goes wrong and nothing works, then heart to bear the blame and money to buy a new phone.
Now Procedure for rooting MT6582M based Micromax Canvas Fire 2 A104:-
a) Download SP Flash tool and also download the recovery utility.
b) Extract both somewhere on your pc but not out side "C/" drive.
c) Open Flash tool and click on scatter loading.
d) Select scatter loading "MT6582_Android_scatter" from recovery utility folder.
e) Now De-select everything other than recovery and boot in the flashtool.
f) Make sure only recovery & boot is selected in flashtool then click Download button.
g) Now connect your fire 2 (without battery) to your pc.
h) Let the process complete. After this disconnect your phone and press Volume up(+) and Power Button for
booting in to recovery.
i) In recovery choose zip "Update SuperUser zip" and flash it and voila.
You have got root and one of the best custom recovery "Phillz Touch based recovery" on your fire 2. Now start firing and enjoy.
Screenshot Given for reference of "Phillz Recovery".
Disclaimer:-
If anything goes wrong, and nothing is there left to make your phone come back, then neither me nor XDA nor my dev brothers are responsible for this. You are the person who have chosen to do this to your device and so you're the responsible person for this. So please do responsibly and enjoy boldly.
Click to expand...
Click to collapse
hey buddy after rooting when I open superuser it says "The SU binary needs to be updated" and it doest work, I reflashed superuser with recovery but did't get root access..

branndonn1 said:
Hi man,
I did the whole procedure properly and the top half of my phone screen is inverted.. Not the display, but the touch only.. I must touch the center of the screen to pull down the status bar.. (Know what I mean?) I can't seem to fix the issue.. I tried flashing stock recovery.img, didn't work. Tried stock rom, didn't work. Did a full wipe too.. I'm not blaming you, I just need your help.. Any idea why that happened or how to fix it?
Click to expand...
Click to collapse
same problem...
---------- Post added at 12:23 PM ---------- Previous post was at 11:48 AM ----------
MayankGupta said:
hey buddy after rooting when I open superuser it says "The SU binary needs to be updated" and it doest work, I reflashed superuser with recovery but did't get root access..
Click to expand...
Click to collapse
not working.........plzz help after hitting download button nothing is happening

Driver not installing in Windows 8. Says driver signature is not present in INF.

Hello brother, something's wrong with my phone (mmx a104). After flashing custom recovery (twrp, philz) when I boot into recovery, touchscreen starts behaving abnormal. It got inverted horizontally and vertically. And it doesn't touch the place where I touch the screen.
Any solution dude.
Sent from my Micromax E352 using XDA-Developers mobile app

Best method to unlock zenfone 5 bootloader without any freeze/random reboot!

I'm using RR 5.6.9 by @tank0412 for last one week.
http://forum.xda-developers.com/zenfone-5/development/rom-resurrection-remix-mm-5-6-7-t3357331
So far I didn't face any freezing or random reboot issues. What I did is as below:
1. Flash/downgrade to UL-ASUS_T00F-WW-2.21.40.30-user firmware.
If you know how to flash stock firmware then skip step 2-12 and just flash it by yourself. These steps are for new users.
2. TURN OFF the device. Press and hold Volume Up+Power to enter to fastboot/droidboot. When the ASUS logo shows up, release the power button and keep on pressed the Volume UP button. This will take you to droidboot/fastboot mode.
3. Check whether your PC detects the fastboot...
Code:
fastboot devices
if not, go to device manager and install the fastboot driver(by online). if fails, install from the PC by selecting the android device from the list.
4. Download this image UL-ASUS_T00F-WW-2.21.40.30-user.zip: http://dlcdnet.asus.com/pub/ASUS/Ze...user.zip?_ga=1.61130092.1708615694.1457697474
If you have different SKU, you need to find the right firmware(version-2.21.40.30) here: https://www.asus.com/Phone/ZenFone_5_A500CG/HelpDesk_Download/
5. Extract fastboot.img, boot.img, recovery.img from the zip file and copy to ADB folder to flash. Copy UL-ASUS_T00F-WW-2.21.40.30-user.zip to ADB folder as well.
6. Run the below commands:
Code:
fastboot flash fastboot fastboot.img
fastboot reboot-bootloader
wait for reboot.....
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
7. Then go to recovery by selecting from the menu, you will an android logo with "!" sign. Press power+vol down+vol up sequentially and simultaneously, don't release any of the buttons. You should be in recovery mode.
8. In the recovery, select wipe data/factory reset
9. Select wipe cache partition
10. Select apply update over adb sideload
11. Now check whether your PC detects the ADB over USB. if not, go to your PC's device manager and install the ADB driver online. if fails, install from the PC by selecting the android device from the list.
12. After successful detection, run below command
Code:
adb sideload UL-ASUS_T00F-WW-2.21.40.30-user.zip
13. Download this official tool for Unlock Bootloader: http://dlcdnet.asus.com/pub/ASUS/Ze...rel.zip?_ga=1.117083014.1481752799.1464212721
A501cg users should get the tool here: https://www.asus.com/Phone/ZenFone_5_A501CG/HelpDesk_Download/
14. Extract the downloaded file and copy the .apk file into you SDcard. Install that .apk(if it says untrusted app, then go to settings>security>enable Unknown sources).
15. Run the installed app and press unlock. wait and let it reboot. After this, your Asus splash screen will become white & bright.
16. Now do a clean flash for any custom rom.
You guys can try it. :highfive:
Note: Few users are having "No Camera" issue for unlocked bootloader. This method will not fix that. Sorry about it, I'm a victim as well.

a8962383 said:
I'm using RR 5.6.9 by @tank0412 for last one week.
http://forum.xda-developers.com/zenfone-5/development/rom-resurrection-remix-mm-5-6-7-t3357331
So far I didn't face any freezing or random reboot issues. What I did is as below:
1. Flash/downgrade to UL-ASUS_T00F-WW-2.21.40.30-user firmware.
If you know how to flash stock firmware then skip step 2-12 and just do it.
2. TURN OFF the device. Press and hold Volume Up+Power to enter to fastboot/droidboot. When the ASUS logo shows up, release the power button and keep on pressed the Volume UP button. This will take you to droidboot/fastboot mode.
3. Check whether your PC detects the fastboot...
Code:
fastboot devices
if not, go to device manager and install the fastboot driver(by online). if fails, install from the PC by selecting the android device from the list.
4. Download this image UL-ASUS_T00F-WW-2.21.40.30-user.zip: http://dlcdnet.asus.com/pub/ASUS/Ze...user.zip?_ga=1.61130092.1708615694.1457697474
If you have different SKU, you need to find the right firmware(version-2.21.40.30) here: https://www.asus.com/Phone/ZenFone_5_A500CG/HelpDesk_Download/
5. Extract fastboot.img, boot.img, recovery.img from the zip file and copy to ADB folder to flash. Copy UL-ASUS_T00F-WW-2.21.40.30-user.zip to ADB folder as well.
6. Run the below commands:
Code:
fastboot flash fastboot fastboot.img
fastboot reboot-bootloader
wait for reboot.....
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
7. Then go to recovery by selecting from the menu, you will an android logo with "!" sign. Press power+vol down+vol up sequentially and simultaneously, don't release any of the buttons. You should be in recovery mode.
8. In the recovery, select wipe data/factory reset
9. Select wipe cache partition
10. Select apply update over adb sideload
11. Now check whether your PC detects the ADB over USB. if not, go to your PC's device manager and install the ADB driver online. if fails, install from the PC by selecting the android device from the list.
12. After successful detection, run below command
Code:
adb sideload UL-ASUS_T00F-WW-2.21.40.30-user.zip
13. Download this official tool for Unlock Bootloader: http://dlcdnet.asus.com/pub/ASUS/Ze...rel.zip?_ga=1.117083014.1481752799.1464212721
14. Extract the downloaded file and copy the .apk file into you SDcard. Install that .apk(if it says untrusted app, then go to settings>security>enable Unknown sources).
15. Run the installed app and press unlock. wait and let it reboot. After this, your Asus splash screen will become white & bright.
16. Now do a clean flash for any custom rom.
You guys can try it. :highfive:
Note: Few users are having "No Camera" issue for unlocked bootloader. This method will not fix that. Sorry about it, I'm a victim as well.
Click to expand...
Click to collapse
When i run unlock application its saying my device its not supported. My device is zenfone 5 a501cg 1.2 ghZ, 2gb ram and 8 gb rom.
Sent from my ASUS_T00J using XDA-Developers mobile app

Well weather this method would work is debatable since I have used various methods posted on ozanks thread but non have worked I even used a debricking method and it still didn't fix freeze this method would only qualify and a downgrade from roms after this

pintuvirani said:
When i run unlock application its saying my device its not supported. My device is zenfone 5 a501cg 1.2 ghZ, 2gb ram and 8 gb rom.
Sent from my ASUS_T00J using XDA-Developers mobile app
Click to expand...
Click to collapse
First of all, please don't quote the whole OP while you are replying.
Yes, it won't work for your device as you have a501cg. You need to get the official unlock tool from this site: https://www.asus.com/Phone/ZenFone_5_A501CG/HelpDesk_Download/
Before that you have to flash or downgrade to *.30.zip firmware.
Sent from my ASUS_T00F using XDA-Developers mobile app

jiyaad1 said:
Well weather this method would work is debatable since I have used various methods posted on ozanks thread but non have worked I even used a debricking method and it still didn't fix freeze this method would only qualify and a downgrade from roms after this
Click to expand...
Click to collapse
Better to give a try. It's been 8 days now and I didn't face the freezing or reboot issue. BTW, which debrick process did u try?
It worked for many: http://forum.xda-developers.com/showthread.php?t=3377455
Sent from my ASUS_T00F using XDA-Developers mobile app

a8962383 said:
Better to give a try. It's been 8 days now and I didn't face the freezing or reboot issue. BTW, which debrick process did u try?
It worked for many: http://forum.xda-developers.com/showthread.php?t=3377455
Click to expand...
Click to collapse
Actually a501 has the SAME unlocker as a500cg. There's only one app that unlocks a wide variety of Asus devices. (Zen6's different afaik).
And we tried to install 2.21.40.30 for base as well and it changed nothing.
And unlocker application doesn't change the working mechanism of phone (we decompiled it).
So, are you sure that you tried to use heavy applications like Youtube or some games?
If you get any user that reports freezes gone; i will try it again with your method.
Thanks for your contribution. Good luck with your method. :laugh:
Btw assuming you have a500cg, that phone can be fixed imo.

ozank said:
Actually a501 has the SAME unlocker as a500cg. There's only one app that unlocks a wide variety of Asus devices. (Zen6's different afaik).
And we tried to install 2.21.40.30 for base as well and it changed nothing.
And unlocker application doesn't change the working mechanism of phone (we decompiled it).
So, are you sure that you tried to use heavy applications like Youtube or some games?
If you get any user that reports freezes gone; i will try it again with your method.
Thanks for your contribution. Good luck with your method.[emoji23]Btw assuming you have a500cg, that phone can be fixed imo.
Click to expand...
Click to collapse
Bro, I'm a heavy user. Many of us had faced forced close for 8 ball pool game. I had it too but after this method no forced close happened again. I'm not sure whether a500cg and a501cg have same app for unlocking. It's a bit confusing to me as they have different sites to download their firmwares and tools. But I'm sure, what ever the phone is a500cg or a501cg, the tool will work if the user has *.30.zip firmware installed.
Sent from my ASUS_T00F using XDA-Developers mobile app

a8962383 said:
Bro, I'm a heavy user. Many of us had faced forced close for 8 ball pool game. I had it too but after this method no forced close happened again. I'm not sure whether a500cg and a501cg have same app for unlocking. It's a bit confusing to me as they have different sites to download their firmwares and tools. But I'm sure, what ever the phone is a500cg or a501cg, the tool will work if the user has *.30.zip firmware installed.
Click to expand...
Click to collapse
Yes because the tool seeks for if.bin on firmware folder and it copies to the sysfs. (You're doing same thing on fastboot when flash ifwi if.bin)
So that's why I don't believe the unlocker tool fixes something.
Anyway, thanks; I will wait for another users that solved the issues with your method and then take a look with my phone.

a8962383 said:
Better to give a try. It's been 8 days now and I didn't face the freezing or reboot issue. BTW, which debrick process did u try?
It worked for many: http://forum.xda-developers.com/showthread.php?t=3377455
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
I've tried it. Within the first few minutes, it froze again.
Anyways, thanks for trying.

cnswico said:
I've tried it. Within the first few minutes, it froze again.
Anyways, thanks for trying.
Click to expand...
Click to collapse
Did you downgrade to UL-ASUS_T00F-WW-2.21.40.30-user.zip?

a8962383 said:
Did you downgrade to UL-ASUS_T00F-WW-2.21.40.30-user.zip?
Click to expand...
Click to collapse
Exactly as stated in the instructions. I'll try it a second time.

cnswico said:
Exactly as stated in the instructions. I'll try it a second time.
Click to expand...
Click to collapse
This unlock app its work on first kikat rom 2.19 build. But thing is my device not detecting sim on jelly bean and first kitkat build. I tried many time but not detecting sim. Only start detecting sim from 2.19.40.9 to lollipop rom only.
Sent from my ASUS_T00J using XDA-Developers mobile app

It froze again about 3 hours after I had unlocked with asus tool & flashed RR 5.6.9. And I hate that white & bright splash screen anyways, thanks so much for doing research. I believe we will find out a way to solve this problem some day.

a8962383 said:
Better to give a try. It's been 8 days now and I didn't face the freezing or reboot issue. BTW, which debrick process did u try?
It worked for many: http://forum.xda-developers.com/showthread.php?t=3377455
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
I used a method suggested by @dgadelha and it still didn't help and right now I lost my phone to a freak accident so I'm with out a unit for testing ?

tranxuanthang said:
It froze again about 3 hours after I had unlocked with asus tool & flashed RR 5.6.9. And I hate that white & bright splash screen anyways, thanks so much for doing research. I believe we will find out a way to solve this problem some day.
Click to expand...
Click to collapse
Extract splash.bin from rom:
fastboot flash splash splash.bin
or
fastboot flash splashscreen splash.bin
I don't remember which was doing this, but try these

a8962383 said:
Many of us had faced forced close for 8 ball pool game.
Click to expand...
Click to collapse
this is not due to bootloader
I have no problems with bootloader
8 ball force closed on all custom MM rom's
I have no problems except "freeze on 8 ball"
all custom MM rom's used dgadelha's device tree
I think there is a mistake in this

milano88 said:
this is not due to bootloader
I have no problems with bootloader
8 ball force closed on all custom MM rom's
I have no problems except "freeze on 8 ball"
all custom MM rom's used dgadelha's device tree
I think there is a mistake in this
Click to expand...
Click to collapse
You are right. Most of the cross platform developed apps are crashing. It seems like something is wrong with the JavaScript's render engine. I don't play with ROMs. Hope ppl will come forward to have a fix. But to my utter surprise it's been 10days, I still don't have any freezing.
Sent from my ASUS_T00F using XDA-Developers mobile app

Before, following your method with 2.21.40.30-user.zip was not success, but downgrade to 2.22.40.540-user.zip is ok. Unlocked with black logo, white ground but can not flash TWRP, how can install cooked ROM?

My phone is Asus Zenfone 5 T00j A501CG WW. It has 1.6 GHz CPU, 16 gb internal, 2 gb ram. Can this method work if I get the stock firmware you mentioned?

Hi I am new to Android, I follow the steps as mentioned. But not able to after step 7(Press power+vol down+vol up sequentially and simultaneously, don't release any of the buttons. You should be in recovery mode.), I am not go to recovery mode. The phone goes power off mode and is not starting again. Any help is appreciated.
Regards,
Debasish

[DISCUSSION] Galaxy A10s successfully rooted! (SM-A107M)

Rooting A10s with Magisk [Very Early Root]​
Hello community. I wanted to post my progress on trying to root this device and maybe was hoping for some pointers.
Unfortunately the steps are somewhat complicated, especially since we don't have a custom recovery.
Would appreciate some of the more experienced developers if you could give me a hand, since my knowledge is very very limited (don't know how to compile my own custom recovery, have 0 knowledge on even using git hub lmao)
Thanks for reading, here's what I got so far
Things to know about the A10s​
It is a System As Root device
It is an AB device (after Android 10 update)
It has no custom recovery as of yet
The process may also work for the F variant
The process I used to root with Magisk is here: https://topjohnwu.github.io/Magisk/install.html
Special thanks to @topjohnwu for his very detailed guide
Ok and now well, to explain where I'm currently stuck. The final step to finish installation off is to reboot to stock recovery and wipe data. I'm guessing that this will fix the signal problem I have, but can't know for sure until I try. The problem with that is that topjohnwu states as follows:
We now want to boot into the stock recovery to factory reset our device.
Full data wipe is mandatory! Do not skip this step.
Press Power + Volume Down to exit download mode. As soon as the screen turns off, immediately press the combo key to boot to recovery (e.g. on the S10 it is Power + Bixby + Volume Up). Since we want to boot into stock recovery, continue pressing the volume up button until you see the stock recovery screen.
Use volume buttons to navigate through the stock recovery menu, and the power button to select an option. Choose Wipe data/factory reset to wipe the data of the device.
Click to expand...
Click to collapse
The problem here is that no matter how hard I try, I can't boot to stock recovery
I can boot the device as follows
System+No magisk (signal works here)
System+Magisk (RIL broken)
However I simply can't boot to stock recovery. Apparently I need to leave the VOL + button pressed and keep it pressed but it's simply not doing anything. Even using adb to reboot to recovery and holding the VOL + button since it even shuts down is not doing anything.
I don't know where to go from here, I simply can't boot to stock recovery
Would really like to know suggestions
Thanks for reading!

Currently I am hosting a Telegram group for anybody that wants to follow development as it progresses. But for questions, please keep them here on XDA
Link: https://t.me/a107X

I managed to boot to stock recovery by pressing power vol down and plugging usb in at the same time I think.

Update: Well, I flashed stock recovery with Odin. Managed to boot directly to recovery, wiped data and immediately flashed the magisk patched recovery. However this still did not fix the broken signal problem, as I expected. The search for a fix is still on.

you should follow topjohnwu's instructions for samsung devices..
edit: maybe you are, they are included in the link you posted but youre not specific in the steps youre taking for others to help you.
you could also im sure follow same steps as F variant id think but dont blame me for troubles lol

elliwigy said:
you should follow topjohnwu's instructions for samsung devices..
edit: maybe you are, they are included in the link you posted but youre not specific in the steps youre taking for others to help you.
you could also im sure follow same steps as F variant id think but dont blame me for troubles lol
Click to expand...
Click to collapse
Yeah I'll try that method in due time. But I'm really in no hurry since I've got root anyway and I just use it from time to time, so I just reboot to system+magisk only when I need to and just boot system normally every other time.

ShaDisNX255 said:
Yeah I'll try that method in due time. But I'm really in no hurry since I've got root anyway and I just use it from time to time, so I just reboot to system+magisk only when I need to and just boot system normally every other time.
Click to expand...
Click to collapse
Hey op, did you flash magisk with odin using patched file? if you did, could you share your patched file and the firmware version you used? Odin keeps failing when i try to patch.

MR2_Wei said:
Hey op, did you flash magisk with odin using patched file? if you did, could you share your patched file and the firmware version you used? Odin keeps failing when i try to patch.
Click to expand...
Click to collapse
I think I'll have some time this weekend, I'll try to put a in-depth tutorial with all the files required.
But, can you tell me the error you get on Odin and/or any error messages on your phone?

By the way, the signal problem has been reported on other occasions.
It seems to be a problem on this Mediatek SoC
https://github.com/topjohnwu/Magisk/issues/1801
topjohnwu seems to have just brushed it off so it doesn't seem like it's going to get fixed anytime soon

Sorry for butting in and my ignorance...I need HELP!
ShaDisNX255 said:
Rooting A10s with Magisk [Very Early Root]​
Hello community. I wanted to post my progress on trying to root this device and maybe was hoping for some pointers.
Unfortunately the steps are somewhat complicated, especially since we don't have a custom recovery.
Would appreciate some of the more experienced developers if you could give me a hand, since my knowledge is very very limited (don't know how to compile my own custom recovery, have 0 knowledge on even using git hub lmao)
Thanks for reading, here's what I got so far
Things to know about the A10s​
It is a System As Root device
It is an A-Only device
It has no custom recovery as of yet
The process may also work for the F variant
The process I used to root with Magisk is here: https://topjohnwu.github.io/Magisk/install.html
Special thanks to @topjohnwu for his very detailed guide
Ok and now well, to explain where I'm currently stuck. The final step to finish installation off is to reboot to stock recovery and wipe data. I'm guessing that this will fix the signal problem I have, but can't know for sure until I try. The problem with that is that topjohnwu states as follows:
The problem here is that no matter how hard I try, I can't boot to stock recovery
I can boot the device as follows
System+No magisk (signal works here)
System+Magisk (RIL broken)
However I simply can't boot to stock recovery. Apparently I need to leave the VOL + button pressed and keep it pressed but it's simply not doing anything. Even using adb to reboot to recovery and holding the VOL + button since it even shuts down is not doing anything.
I don't know where to go from here, I simply can't boot to stock recovery
Would really like to know suggestions
Thanks for reading!
Click to expand...
Click to collapse
I have a Samsung A10S (a107M) had it for a few days - I cannot get the bootloader unlocked. I can get it to the screen where it says long press vol up to unlock bootloader. When I do this it reboots, and starts 'normally' PLEASE if anyone can help I will happily buy you a beer!

SandsCayman said:
I have a Samsung A10S (a107M) had it for a few days - I cannot get the bootloader unlocked. I can get it to the screen where it says long press vol up to unlock bootloader. When I do this it reboots, and starts 'normally' PLEASE if anyone can help I will happily buy you a beer!
Click to expand...
Click to collapse
Just keep trying, and leave the VOL + button pressed even after it reboots. I remember last time I rooted, it took me approximately 4 or 5 attempts to finally get bootloader unlocked. Keep doing it until you can finally see the message that your bootloader is unlocked.

Hii there...
I've been trying to root my SM-107F(Samsung a10s) for months now with no luck,honestly speaking am very close to giving up even I wanted it so bad...And I've tried almost every top recommended methods out there,including using kingoroot,kingroot,irobot,magisk,supersu...But still no luck,the main problem is that I can't reboot successfully into bootloader and when I do so by clicking the vol up and power button simultaneously it just reboot...Plz anyone who has successfully rooted their Samsung a10s plz help me and I know all the side effects and disadvantages of rooting a mobile device including bricking and void warranty and am willing to take the risk...So if there is someone out there who can help,your help will be most appreciated.

Aaron_MK said:
Hii there...
I've been trying to root my SM-107F(Samsung a10s) for months now with no luck,honestly speaking am very close to giving up even I wanted it so bad...And I've tried almost every top recommended methods out there,including using kingoroot,kingroot,irobot,magisk,supersu...But still no luck,the main problem is that I can't reboot successfully into bootloader and when I do so by clicking the vol up and power button simultaneously it just reboot...Plz anyone who has successfully rooted their Samsung a10s plz help me and I know all the side effects and disadvantages of rooting a mobile device including bricking and void warranty and am willing to take the risk...So if there is someone out there who can help,your help will be most appreciated.
Click to expand...
Click to collapse
If you have Telegram, you can join our group and we can give you help in real time. TWRP will most likely be released soon so rooting is going to get a lot easier, if you can wait.

Aaron_MK said:
Hii there...
I've been trying to root my SM-107F(Samsung a10s) for months now with no luck,honestly speaking am very close to giving up even I wanted it so bad...And I've tried almost every top recommended methods out there,including using kingoroot,kingroot,irobot,magisk,supersu...But still no luck,the main problem is that I can't reboot successfully into bootloader and when I do so by clicking the vol up and power button simultaneously it just reboot...Plz anyone who has successfully rooted their Samsung a10s plz help me and I know all the side effects and disadvantages of rooting a mobile device including bricking and void warranty and am willing to take the risk...So if there is someone out there who can help,your help will be most appreciated.
Click to expand...
Click to collapse
i already done rooted my A10s (A107F) but now i want to know if there's someone in here can unroot this devices without flashing the stock rom...
i try flash the original boot.img and it didn't work for me cause it make my phone bootloop..
any suggest maybe...?

ShaDisNX255 said:
If you have Telegram, you can join our group and we can give you help in real time. TWRP will most likely be released soon so rooting is going to get a lot easier, if you can wait.
Click to expand...
Click to collapse
Telegram link please....?

jogijee said:
Telegram link please....?
Click to expand...
Click to collapse
It's on the seccond post

Can you help me I am trying to root a SM-A107M

i need some help here, couldn't find the solution anywhere else, after everything done the way it should be, in the last rooting step when i should get the magisk message: "requires additional setup" so the system reboots into root, i do not get that message at all, it does not appear in the screen, does somebody know what is wrong?