So I tried to root my Samsung Galaxy S6 edge plus, after so many problems erupted and trying different methods, I tried unrooting it and even a factory reset.
Now it boots and stays stuck on the AT&T logo animation screen with the blue light staying on, I've searched EVERYWHERE and I cannot find a solution to this.
Can anyone help me please?
Download the full Odin restore on for this model, then flash on Odin. I had the same problem.
---------- Post added at 03:06 AM ---------- Previous post was at 03:05 AM ----------
http://forum.xda-developers.com/att-galaxy-s6-edge-plus/general/g928a-odin-restore-files-t3214359
Full Odin restore
Related
I followed directions found online to unroot and restore the SIII to factory. Everything went fine I followed all the directions: downloaded the Stock ROM onto the phone along with Mobile Odin, Mobile Odin Flash Kernel and Triangle Away. Ran Triangle Away successfully then loaded the Stock Rom with Mobile Odin and even Flashed the Kernel without a hitch! Phone rebooted and I was presented with messages about the phone having to reboot to install updates, etc... I let it - the phone reboots and now ceases to turn on. Nothing works! I've tried pulling the battery, holding down the power button with and without the a battery, tried turning the device on while plugged in to wall - nothing!
I'm thinking maybe the main board got fried? If that's the case is all lost with this phone? I really do like this phone and would hate to lose it to such a dumb mistake especially when I was just trying to restore it to it's original state.
Any way to save this phone? Anyone else have had a similar problem and solution?
Thanks!
Never stock flash a Full Official ROM with mobile Odin, youre bootloader got corrupted and you'll need a 16gb class 10 sdcard to repair it, search this forum for the debrick image.
Official Stock can only be done PC Odin and Kies.
---------- Post added at 08:09 AM ---------- Previous post was at 08:08 AM ----------
Or 32gb if you have that model
Hello,
I am not new to rooting, made a mistake in installing cyanogemod 10.2.1 on my S3. I had the Status 6 error, saw some troubleshoot fix online and it told me to delete the first line from the Update Script inside the google folder. I went to recovery, installed the rom, it said restart, so i did. Now my S3 wont load into recovery or to download mode at all. Although i still see the qhsusb_dload in device manager when i plug it in my pc.
I have tried booting from an sd card but i got nothing, i kept on trying different debrick images from everywhere and i dont know if i have the right one. My phone was in 4.4.2 before all this happened. Please help because i just got this new phone and i really dont have money to jtag. My parents would kill me.
Thank you.
http://forum.xda-developers.com/showthread.php?t=2549068
---------- Post added at 12:00 PM ---------- Previous post was at 11:52 AM ----------
http://forum.xda-developers.com/showthread.php?t=2962626
I had TWRP 2.8.7.0 working fine, but tried upgrading to 3.0 -
That had a weird issue where twrp would show the splash screen, the screen would intermittently turn off and on, and keep showing the splash screen, but never entered recovery.
Decided to revert to 2.8.7.0 using flashify... Now when I try to create a nandroid backup in 2.8.7.0, it starts working and then shows the twrp splash screen, and as in 3.0 the screen intermittently turns on and off.
Anyone experienced something like this before? Kind of unsure how to proceed.
Update: now it does the screen intermittently flashing on and off, stuck on twrp flash screen just trying to enter twrp.
Also tried removing SD-Card with no luck
Update2: The behavior is pretty much identical to what's seen in this video https://www.youtube.com/watch?v=Kr46ugrpL6U , except it only happens in recovery (I can enter the os normally if i dont attempt to go into recovery)
This has been common problem with twrp from the looks of it. Right now when I boot to twrp 2.7.x.x I get stuck at the twrp splash. However my problem I can't find any info on your there looks to be two terminal commands you can run to fix it..... Seeing this post I wanted to ask about mine at the same time couldn't hurt do to its starting to look related to the recovery boot loop. But like I said I'm just stuck at it not looping.... very odd.
---------- Post added at 03:14 PM ---------- Previous post was at 03:02 PM ----------
OK mine was sad and simple.... I formatted my SD card back to portable storage and poof it now boots to recovery don't know if it could be related but it's worth a shot!
cmjester6421 said:
This has been common problem with twrp from the looks of it. Right now when I boot to twrp 2.7.x.x I get stuck at the twrp splash. However my problem I can't find any info on your there looks to be two terminal commands you can run to fix it..... Seeing this post I wanted to ask about mine at the same time couldn't hurt do to its starting to look related to the recovery boot loop. But like I said I'm just stuck at it not looping.... very odd.
---------- Post added at 03:14 PM ---------- Previous post was at 03:02 PM ----------
OK mine was sad and simple.... I formatted my SD card back to portable storage and poof it now boots to recovery don't know if it could be related but it's worth a shot!
Click to expand...
Click to collapse
Unfortunately I don't think it's the same, because I still have issues even with the SD card removed. Also, I'm on lollipop if that helps.
I remember that happened once to me in a Samsung device. But eve worst, my device was unable to boot into OS. What I did was put download mode and flashed any version that was easy to root. Then, root, flash recovery TWRP, and then used a nandroid backup. You can apply same procedure on this LG G3 and you'll be back on the game.
Enviado desde mi LG-D851 mediante Tapatalk
Hi,
I know this is a typical newbie has no idea what he's doing scenario, so I apologize. However, I feel like I've tried everything and am yielding no results.
I am trying to root a Verizon LG G3. Since I'm not entirely sure as to the technical details, I want to explain what I think I know. To my understanding, there are different versions of VS985? I haven't seen anything resembling 49A, 49B, or 49C, but the closest thing I found was the software version which said VS9854CA.
The first thing I tried was the One Click Root tool. The tool did not find any methods of rooting though. The next thing I tried was TowelRoot. I set my phone to stay awake while charging, and pressed the "Make it rain" button. It turned yellow as a response, but did not do anything else even after leaving the phone untouched for eight hours. I also tried to ADB tools but "adb reboot fastboot" only rebooted the phone back into the OS, and "adb reboot recovery" showed an android figure with the words "No Command" for a small duration before rebooting back into the OS. The final guide I tried was the KDZ and TOT methods. KDZ resulted in the message "Upgrade stopped due to an error," and TOT displayed "READY!" for the COM41 but did not attempt anything even after unplugging and plugging the phone back in.
Can anyone help me please? Could there be something I'm doing wrong in any of those methods?
I appreciate all the help I get. Thank you.
I'm in the same boat. I just got this phone from eBay, thought it would be easy to root as I used to have one and that was my experience at that time. Things have changed... There is no root for this latest software version 4CA. Totally sucks!
Any suggestions for a comparable phone that can be rooted when on the latest stock update? I'm on Verizon btw...
just use the LGFlash Tool 2014 and flash the 47A KDZ (6.0) file and then rooted using KingRoot 4.9.6 .. Now going to flash twrp and them fulmics rom.
I have tried everything else nothing worked for me. I was on VS985.... MRA58K (6.0.1).. Tot method didn't worked...flashing 10b KDZ also didn't worked.. They keep giving error.
---------- Post added at 04:33 PM ---------- Previous post was at 03:44 PM ----------
Twrp flash doesn't worked and i lost my stock recovery too. NOw just flash 10B Tot with 35B dll and m back to Kitkat. Hope so everything will work now
---------- Post added at 04:55 PM ---------- Previous post was at 04:33 PM ----------
got the red factory reset with status 2.. I had to flash kdz 24b now my phone is booting
The phone was rooted before and I had a few magisk modules installed.
After updating a few of them, the phone entered in a bootloop state. I waited 2 hours, hoping it will start, since a similar event happened a few weeks ago. After realising it will not start I tried to flash back to stock. It gave an error message and now I'm stuck. The phone does try to power on, holding the power button makes it vibrate. It also gets recognized by the PC as "Android". When I try to flash the stock img back on, I get "phone is locked" or something along those lines message. I did try going into recovery but it doesn't work, the screen is black (not dead, it is black color). What can I do?
Mi Flash Tool <<<<<<
I had the same problem with Magisk and version 10.07
---------- Post added at 05:17 PM ---------- Previous post was at 05:17 PM ----------
Mi Flash Tool <<<<<<
I had the same problem with Magisk and version 10.07