Related
Hi. I have the above phone with official marshmallow update and I'm trying to unlock the bootloader. I managed to get a db to work once and got the unlock.bin file from LG. Now I cannot get adb to work again. My device shows up when I start adb but as soon as I reboot into fastboot it freezes and I cannot send any commands to the device it just says <waiting for device>. I have USB debugging enabled and OEM unlock too.
Any help or advice would be very appreciated.
Thanks.
rhjw2011 said:
Hi. I have the above phone with official marshmallow update and I'm trying to unlock the bootloader. I managed to get a db to work once and got the unlock.bin file from LG. Now I cannot get adb to work again. My device shows up when I start adb but as soon as I reboot into fastboot it freezes and I cannot send any commands to the device it just says <waiting for device>. I have USB debugging enabled and OEM unlock too.
Any help or advice would be very appreciated.
Thanks.
Click to expand...
Click to collapse
In fastboot-mode, you need to use the fastboot command. Sorry, if you did try this already, should be obvious. Does fastboot show your devicve? -> 'fastboot devices'
Yes I did try the fastboot cmd with fastboot flash unlock unlock.bin and fastboot oem device-id and get the device waiting.
Any unknown or defective devices in device manager? This would indicate a driver issue.
No. All devices are OK. No warning triangles.
Sorry, I'm out of ideas now.
When going through the adb commands and i type in fastboot oem unlock the command window says waiting for device but on the device nothing at all happens. Ive tried doing it in mtp and ptp modes but still nothing happens. device has never been rooted or unlocked before. On marshmallow and latest june security patch, please help
Wetbreadguy said:
tried doing it in mtp and ptp modes
Click to expand...
Click to collapse
It can only work in fastboot mode (when off press power+vol.dn).
The fastboot devices command must return your N7's serial number. If not, run it as root/admin and/or install a new driver and fastboot app or use NRT.
k23m said:
It can only work in fastboot mode (when off press power+vol.dn).
The fastboot devices command must return your N7's serial number. If not, run it as root/admin and/or install a new driver and fastboot app or use NRT.
Click to expand...
Click to collapse
I do have it in fastboot mode when i run the commands, i just originally set it in mtp or ptp modes.
Hey new to android and looking for root my pixel 2 xl.
Following this guide https://forum.xda-developers.com/pixel-2-xl/how-to/guide-unlock-flash-root-pixel-2-xl-t3702418
Using windows 10, ADB and fastboot version 29.0.6-6198805, android version 8.0.0 security patch level Sept 5, 2017.
OEM unlocking and USB debugging checked.
Enter command "adb reboot bootloader" takes me into the bootloader screen.
Enter command "fastboot flashing unlock_critical" gives me error "FAILED (Write to device failed (Too many links))" "fastboot: error: Command failed"
Phone resets.
Have searched past threads suggesting to use different USB ports and cables. Tried several cables and every port with no luck. Any idea whats causing the error? Thanks
ente2323 said:
Hey new to android and looking for root my pixel 2 xl.
Following this guide https://forum.xda-developers.com/pixel-2-xl/how-to/guide-unlock-flash-root-pixel-2-xl-t3702418
Using windows 10, ADB and fastboot version 29.0.6-6198805, android version 8.0.0 security patch level Sept 5, 2017.
OEM unlocking and USB debugging checked.
Enter command "adb reboot bootloader" takes me into the bootloader screen.
Enter command "fastboot flashing unlock_critical" gives me error "FAILED (Write to device failed (Too many links))" "fastboot: error: Command failed"
Phone resets.
Have searched past threads suggesting to use different USB ports and cables. Tried several cables and every port with no luck. Any idea whats causing the error? Thanks
Click to expand...
Click to collapse
Did you try just
fastboot flashing unlock first?
Tulsadiver said:
Did you try just
fastboot flashing unlock first?
Click to expand...
Click to collapse
Yes I tried commands "fastboot flashing unlock" as well as "fastboot flashing unlock_critical". Both commands give the exact same error.
The command "adb devices" does recognize that the phone is plugged in. Also the drivers are up to date.
ente2323 said:
Yes I tried commands "fastboot flashing unlock" as well as "fastboot flashing unlock_critical". Both commands give the exact same error.
The command "adb devices" does recognize that the phone is plugged in. Also the drivers are up to date.
Click to expand...
Click to collapse
Maybe trying to update your firmware to something closer to current. You're about 3 years out of date....
ente2323 said:
Yes I tried commands "fastboot flashing unlock" as well as "fastboot flashing unlock_critical". Both commands give the exact same error.
The command "adb devices" does recognize that the phone is plugged in. Also the drivers are up to date.
Click to expand...
Click to collapse
Are you using Powershell or command prompt for your interface?
Badger50 said:
Are you using Powershell or command prompt for your interface?
Click to expand...
Click to collapse
I'm using command prompt.
Tulsadiver said:
Maybe trying to update your firmware to something closer to current. You're about 3 years out of date....
Click to expand...
Click to collapse
ente2323 said:
I'm using command prompt.
Click to expand...
Click to collapse
Then i would suggest that you update your firmware via OTA as Tulsadiver suggested. Then try your unlocking command "fastboot flashing unlock"
The critical one is no longer needed after the 9.0 update. Good luck. :good:
ente2323 said:
I'm using command prompt.
Click to expand...
Click to collapse
Do you see your serial number when you type:
fastboot devices
Badger50 said:
Then i would suggest that you update your firmware via OTA as Tulsadiver suggested. Then try your unlocking command "fastboot flashing unlock"
The critical one is no longer needed after the 9.0 update. Good luck. :good:
Click to expand...
Click to collapse
Thanks I will consider upgrading the firmware if there is no other solution. I am going to see if I can solve the problem on 8.0 for now.
Tulsadiver said:
Do you see your serial number when you type:
fastboot devices
Click to expand...
Click to collapse
Entering the command "fastboot devices" gives me nothing. When I try "adb devices" my serial number is displayed.
ente2323 said:
Thanks I will consider upgrading the firmware if there is no other solution. I am going to see if I can solve the problem on 8.0 for now.
Entering the command "fastboot devices" gives me nothing. When I try "adb devices" my serial number is displayed.
Click to expand...
Click to collapse
Are you in fastboot mode or bootloader mode when your typing "fastboot devices"???
Badger50 said:
Are you in fastboot mode or bootloader mode when your typing "fastboot devices"???
Click to expand...
Click to collapse
I'm not sure of the difference. The screen I attempt to unlock reads FastBoot Mode in red. Fastboot devices is now displaying my phones serial. Adb devices no longer displays serial.
I cannot remember if I had fastboot mode loaded earlier when I attempted the command "Fastboot devices". It is now displaying serial when enter the command while in fastboot mode.
ente2323 said:
I'm not sure of the difference. The screen I attempt to unlock reads FastBoot Mode in red. Fastboot devices is now displaying my phones serial. Adb devices no longer displays serial.
I cannot remember if I had fastboot mode loaded earlier when I attempted the command "Fastboot devices". It is now displaying serial when enter the command while in fastboot mode.
Click to expand...
Click to collapse
Fastboot mode, or bootloader mode as some call it, is when you enter it when the phone is shut off with the power + volume down buttons, or from ADB reboot bootloader when your phone is on. ADB devices will not work in fastboot/bootloader mode. Conversly speaking, fastboot devices will not work while your in your OS with the phone on. All your fastboot commands must be done from fastboot/bootloader mode. :good:
I'd try out the pixel all in one tool, it makes these things dummy proof. But really, take the OTA and get your phone updated first.
Hi everyone, I recently bought a 2xl pixel and it's updated to Android 10, and I want to change rom (basically why I like to see how much can be done)but I have the problem that it is Verizon version, I have tried to unlock it with the methods I have seen, but I have seen that it depends on the Android version.I would like to know if there is a way to unlock the OEM unlock in order to unlock the bootloader. My model is the Google Pixel 2XL 128GB. Thanks in advance
Joseft1 said:
Hi everyone, I recently bought a 2xl pixel and it's updated to Android 10, and I want to change rom (basically why I like to see how much can be done)but I have the problem that it is Verizon version, I have tried to unlock it with the methods I have seen, but I have seen that it depends on the Android version.I would like to know if there is a way to unlock the OEM unlock in order to unlock the bootloader. My model is the Google Pixel 2XL 128GB. Thanks in advance
Click to expand...
Click to collapse
Sorry to say, if your device is a Verizon carrier variant (not purchased directly from Google), then you will not be able to unlock the bootloader at this time (or likely ever)....
To be sure:
after enabling "Developer Options" if you can't enable the "OEM UNLOCKING" toggle, your bootloader is not unlockable.
hi devs
i flashed accidentially Chinese recovery rom on my whyred now i m unable to switch from Chinese to global version as i tried every method fastboot,recovery,qfil,mi flash and edl mode i mean every possible way but all in vain as every method ended with error and my fastboot command is locked.
so what can i do please suggest me
it's Chinese miui 11
guys please help me i m frustrated tried every available method on internet downloaded tons of file.
aliasgertaj said:
guys please help me i m frustrated tried every available method on internet downloaded tons of file.
Click to expand...
Click to collapse
What you are trying to do? Just switch from Chinese to Global? or your device is bricked now?
What did happen after that you flashed the Chinese recovery ROM?
What modes do you have available?
Did you unlock bootloader previously?
SubwayChamp said:
What you are trying to do? Just switch from Chinese to Global? or your device is bricked now?
What did happen after that you flashed the Chinese recovery ROM?
What modes do you have available?
Did you unlock bootloader previously?
Click to expand...
Click to collapse
i m not bricked as my device is working fine
but now no fastboot command working i m not able to flash custom recovery
i tried fastboot method , used miflash method every miflash from old to newest , qfil edl mode method with miflash and qualcomm flash tool
i m just able to switch between china stable n developer rom
if i m able to unlock ma fastboot command then i can flash atleast custom recovery .
kindly help me as all method ended up every time with diffrent error.
aliasgertaj said:
i m not bricked as my device is working fine
but now no fastboot command working i m not able to flash custom recovery
i tried fastboot method , used miflash method every miflash from old to newest , qfil edl mode method with miflash and qualcomm flash tool
i m just able to switch between china stable n developer rom
if i m able to unlock ma fastboot command then i can flash atleast custom recovery .
kindly help me as all method ended up every time with diffrent error.
Click to expand...
Click to collapse
Fastboot flashing commands won't work if you have bootloader locked.
Did you unlock bootloader previously and probably get locked again?
Did you enable all the proper options on Developer section, i.e. USB debugging and check if device is recogniced on adb commands?
What do you get with "fastboot getvar all"?
subwaychamp said:
fastboot flashing commands won't work if you have bootloader locked.
Did you unlock bootloader previously and probably get locked again?
Did you enable all the proper options on developer section, i.e. Usb debugging and check if device is recogniced on adb commands?
What do you get with "fastboot getvar all"?
Click to expand...
Click to collapse
thanks a lot dude i m on unlock boot loader .
But bootloader some time works means sometimes it shows my device name after available device command it shows only ???????? Fastboot devices
i tried all way possible but none of them worked.
And i m unable to switch from china to global.
Only i can do is switch between china stable to developer.
i tried getvar command but it gave me this
PS C:\adb> adb reboot bootloader
error: device '(null)' not found
PS C:\adb> fastboot getvar all
getvar:all FAILED (command write failed (Unknown error))
finished. total time: 5.007s
PS C:\adb>
aliasgertaj said:
i tried getvar command but it gave me this
PS C:\adb> adb reboot bootloader
error: device '(null)' not found
PS C:\adb> fastboot getvar all
getvar:all FAILED (command write failed (Unknown error))
finished. total time: 5.007s
PS C:\adb>
Click to expand...
Click to collapse
And you said you enabled USB debuging?!? you didn't. First enable it under development tools.
MAKE SURE YOUR USING RIGHT ADB/FASTBOOT TOOLS AND DRIVERS.
After 'adb reboot bootloader' use 'fastboot devices'. You can change usb cable and if you still get errors try using usb hub.
If all above fails than try it on WIN7 PC.
aliasgertaj said:
thanks a lot dude i m on unlock boot loader .
But bootloader some time works means sometimes it shows my device name after available device command it shows only ???????? Fastboot devices
i tried all way possible but none of them worked.
And i m unable to switch from china to global.
Only i can do is switch between china stable to developer.
Click to expand...
Click to collapse
aliasgertaj said:
i tried getvar command but it gave me this
PS C:\adb> adb reboot bootloader
error: device '(null)' not found
PS C:\adb> fastboot getvar all
getvar:all FAILED (command write failed (Unknown error))
finished. total time: 5.007s
PS C:\adb>
Click to expand...
Click to collapse
I think you are not properly booted to the proper state while you're trying certain commands. Just to be clear; adb works while your device is power on and fastboot commands will work only while your device is in fastboot mode not while on adb mode. A way to be sure that you are doing properly is enabling USB debugging first but while connected device with PC, a prompt will appear from device screen and then tap on "always allow", then you have to type "adb devices" and follow step by step, if device is recognized you can go to the next step with "adb reboot bootloader" then in fastboot you have to see the bunny otherwise is not properly in fastboot mode, then you can follow with "fastboot devices" and so on, keep in mind that any command will work until device is properly recognized.
SubwayChamp said:
I think you are not properly booted to the proper state while you're trying certain commands. Just to be clear; adb works while your device is power on and fastboot commands will work only while your device is in fastboot mode not while on adb mode. A way to be sure that you are doing properly is enabling USB debugging first but while connected device with PC, a prompt will appear from device screen and then tap on "always allow", then you have to type "adb devices" and follow step by step, if device is recognized you can go to the next step with "adb reboot bootloader" then in fastboot you have to see the bunny otherwise is not properly in fastboot mode, then you can follow with "fastboot devices" and so on, keep in mind that any command will work until device is properly recognized.
Click to expand...
Click to collapse
thanks bro
yesterday i used xiaomitool v2 as it reboot automatically device in fastboot mode but as i said after in fastboot mode it doesn't boot in adb mode.
and what is proper method to open fastboot mode i m doing it by holding power and volume down button.
drnightshadow said:
And you said you enabled USB debuging?!? you didn't. First enable it under development tools.
MAKE SURE YOUR USING RIGHT ADB/FASTBOOT TOOLS AND DRIVERS.
After 'adb reboot bootloader' use 'fastboot devices'. You can change usb cable and if you still get errors try using usb hub.
If all above fails than try it on WIN7 PC.
Click to expand...
Click to collapse
thanks for response bro
i did it under developer option and trusted my computer connection also and install adb fastboot devices many time changed cable and port but nothing happen. i tried fastboot files of china stable rom but it also doesn't worked
aliasgertaj said:
thanks bro
yesterday i used xiaomitool v2 as it reboot automatically device in fastboot mode but as i said after in fastboot mode it doesn't boot in adb mode.
and what is proper method to open fastboot mode i m doing it by holding power and volume down button.
Click to expand...
Click to collapse
Just trying to determine what your words exactly mean when you say "after in fastboot mode it doesn't boot in adb mode." ... without entering in more technical insights adb works when device is on, no sense to boot to fastboot to try to boot to adb after that (?)
If you can boot to fastboot what you have to try firstly is unlock bootloader or be sure that is already unlocked using
Code:
fastboot oem device-info
if your device is or get unlocked then you can try to flash or just boot to a custom recovery but if you can't determine until now if your device is really unlocked then you couldn't go further.
The hardware method to enter to fastboot is from a device off; pressing both pwr and vol down buttons but if the bunny is not displayed probably you didn't really get fastboot mode.
SubwayChamp said:
Just trying to determine what your words exactly mean when you say "after in fastboot mode it doesn't boot in adb mode." ... without entering in more technical insights adb works when device is on, no sense to boot to fastboot to try to boot to adb after that (?)
If you can boot to fastboot what you have to try firstly is unlock bootloader or be sure that is already unlocked using
Code:
fastboot oem device-info
if your device is or get unlocked then you can try to flash or just boot to a custom recovery but if you can't determine until now if your device is really unlocked then you couldn't go further.
The hardware method to enter to fastboot is from a device off; pressing both pwr and vol down buttons but if the bunny is not displayed probably you didn't really get fastboot mode.
Click to expand...
Click to collapse
i m frustrated now tried all the thing tried official flash tool official build but even official build by miflash official latest tool unable to flash image
i bought my device to official xiaomi service center they told it will be done in an hour but after couple of hour they returned my phone that it cant be updated.??????
shame on xiaomi that they implemented a method that they themselves also don't know how to revert it.
aliasgertaj said:
i bought my device to official xiaomi service center they told it will be done in an hour but after couple of hour they returned my phone that it cant be updated.??????
shame on xiaomi that they implemented a method that they themselves also don't know how to revert it.
Click to expand...
Click to collapse
Do yo use WIN10? Find PC with Win7... and install adb/fastboot app and drivers. Than try..
Is your system working now?
Just unlock your bootloader and install OrangeFox recovery than you can flash whatever you need.
Problem solved.
drnightshadow said:
Do yo use WIN10? Find PC with Win7... and install adb/fastboot app and drivers. Than try..
Is your system working now?
Just unlock your bootloader and install OrangeFox recovery than you can flash whatever you need.
Problem solved.
Click to expand...
Click to collapse
ok bro i will try today with another pc and update you
aliasgertaj said:
ok bro i will try today with another pc and update you
Click to expand...
Click to collapse
thanks installed twrp on other pc running on windows 7 but now internal storage goes 0mb unable to mount system
aliasgertaj said:
thanks installed twrp on other pc running on windows 7 but now internal storage goes 0mb unable to mount system
Click to expand...
Click to collapse
Wtf .. what's wrong with you.. you did everything we said wrong... Where and when did I told you to install TWRP????
I'm done with you...
Good luck with china ROM.
Ignorance is a bliss.
drnightshadow said:
Wtf .. what's wrong with you.. you did everything we said wrong... Where and when did I told you to install TWRP????
I'm done with you...
Good luck with china ROM.
Ignorance is a bliss.
Click to expand...
Click to collapse
thanks dude i installed twrp wipe my internal storage there is some error then some tricks goes perfect as i supposed and woohaa i installed masik port edition and now my phone works fine.
aliasgertaj said:
thanks dude i installed twrp wipe my internal storage there is some error then some tricks goes perfect as i supposed and woohaa i installed masik port edition and now my phone works fine.
Click to expand...
Click to collapse
TWRP can't bypass encryption, when you have no access to read data (0mb) then you have to format it, to avoid that is always recommended use OrangeFox, just for future reference, if you understand that you can flash OrangeFox through TWRP for better experience.
Also you can use this tool to help you to automate some stuff https://github.com/Szaki/XiaomiADBFastbootTools
hello there, I'm currently using one plus 7 T, I don't know why , but after updating the last software update my device stuck in Boot loop, i can't able to turn it on, The boot reason says that : Init_user0_Failed . Unable to parse kernel log.Could you please help me to get out from this issue. As i'm outstation from the city, so i can't able to reach the service center. I need my data so i'm trusting you that you guys will sort out the issue, Thank you so much for reading this.
"fastboot set_active other" to switch slot
I'm facing the same problem. Please find a workable solution asap. I'll thank endlessly.
HueyT said:
"fastboot set_active other" to switch slot
Click to expand...
Click to collapse
How and where do I do this?
kiranlalge said:
How and where do I do this?
Click to expand...
Click to collapse
In bootloader mode (check YouTube for how to boot into bootloader or fastboot mode for OnePlus 7t)
HueyT said:
In bootloader mode (check YouTube for how to boot into bootloader or fastboot mode for OnePlus 7t)
Click to expand...
Click to collapse
"fastboot set_active other" to switch slot
It looks like the above needs to be typed in somewhere. Because I do not see any typing option on any of the screens the device shows in this situation.
Please help further. I'm not sure if the developer of the given ROM is reading my posts. I'm very hopeful on him to resolve my issue. Fingers crossed.
kiranlalge said:
"fastboot set_active other" to switch slot
It looks like the above needs to be typed in somewhere. Because I do not see any typing option on any of the screens the device shows in this situation.
Please help further. I'm not sure if the developer of the given ROM is reading my posts. I'm very hopeful on him to resolve my issue. Fingers crossed.
Click to expand...
Click to collapse
Plug phone into windows laptop with adb installed on laptop:
[Download] ADB Installer v1.4.3 - Drivers, ADB and Fastboot Tools
Install drivers, ADB and fastboot tools with one single installer.Advertisement What’s ADB Installer v1.4.3 This package includes all required drivers for Android: ADB drivers (Android Debug Bridge), Fastboot and Google USB-drivers. Very easy to install. Features: Small size. Fast installation...
xiaomifirmware.com
I installed the ADB driver , now what ?? Will this erase my phone's data ?
Hi:
I'm with the same problem here, and i'm trying the "fastboot set_active other" command, but it returns me: "waiting for any device".
How can I proceed to make the phone recognized by the PC?
Zesotar said:
Hi:
I'm with the same problem here, and i'm trying the "fastboot set_active other" command, but it returns me: "waiting for any device".
How can I proceed to make the phone recognized by the PC?
Click to expand...
Click to collapse
15 min adb fastboot drivers, OnePlus USB drivers, Qualcomm USB 9008 drivers (msmtool)
ashuetrx said:
I installed the ADB driver , now what ?? Will this erase my phone's data ?
Click to expand...
Click to collapse
Enable "USB debugging" in Dev.Options, Boot into fastboot mode on phone, type "fastboot devices" and it should give you a code--then your phone is ready for fastboot flashing files
Tried in another computer with Windows 10. It returns: "Slot change is not allowed in Lock State"
I get the a code with the fastboot devices, so it seems the phone is ready.
Finally used MSM tool. I lost all my photoss but I recovered the phone.
Thanks for all the help!
Zesotar said:
Finally used MSM tool. I lost all my photoss but I recovered the phone.
Thanks for all the help!
Click to expand...
Click to collapse
how exactly did you do it with MSM tool?
cromedo7 said:
how exactly did you do it with MSM tool?
Click to expand...
Click to collapse
5 seconds with Google.
Fastboot method is much easier and without data loss.
Download
https://forum.xda-developers.com/t/tool-minimal-adb-and-fastboot-2-9-18.2317790/
Reboot to fastboot mode
Start minimal ADB and fastboot
Type: fastboot devices
If you see device and something like that:1S67gz everything's ok.
Now type: fastboot set_active other
Type reboot.
Done