Develop Bugs

[Q] SuperSU not updating, etc

OK, I know this has been asked and asked again, but I have been reading and digging and googling for several days now, and cannot find a solution.
I've got a JB S3 At&t, and wanted to root it, so after reading for a few weeks, I got the "Samsung_Galaxy_S3_ToolKit_v7.0", donated, and got 7.2 (newest version). I flashed with the toolkit to get an unsecured boot image, with SuperSU 1.04, busybox, and TWRP .
Root happened fine. The phone booted, and when I went to open SuperSU (the icon was in my apps), it asked to update the binaries. I said yes, it failed, and the app opened anyway to allow me to access the options. Triangle away worked fine.
The update binaries thing was bugging me, so I updated to SuperSU 1.10 via google store, and the same thing happened, but now I could not access the program after the binary update failed. It still works (triangle away asks and gets permission) but I could not access the program any longer. It just closes after it informs me that updating the binaries failed.
I have tried installing the program as an app, pushing an APK, and installing a zip from recovery. No matter what I do, it ends up the same.
I have also re-flashed the boot several times, and tried a different method using Odin directly and CF-Root. (seems to be the only way to uninstall it) I have tried numerous combinations, but to no avail. I feel like I have done everything I know how to do short of an unroot to stock and try again.
Any helpful suggestions are welcome.
I'd like to be able to use the program, but this is turning into an OCD nightmare. I'd post this in a development forum, but do not have enough posts yet.

Install "SuperUser" from the market. Manually delete SuperSU from /system/app. Reboot. Reinstall SuperSU from play store and binaries should install fine...

illmatic24 said:
Install "SuperUser" from the market. Manually delete SuperSU from /system/app. Reboot. Reinstall SuperSU from play store and binaries should install fine...
Click to expand...
Click to collapse
Thanks. I ended up doing it the hard way. (I swear I had auto email notification enabled here, or I would have seen your post and tried it)
Anyway, I cleared caches/userdata/wipe cache partition first, then flashed a stock unrooted 4.1.1 rom from here,
Then I used CF-autoroot, and low and behold, SU was showing up as an app. (it was not previously when I used CF-AR)
I let it update itself and bam, it works! Installed adbd insecure, and it works too. (it was not showing up as an app when I did it before either)
Next I added TWRP 2.4.3.0. and everything still works!
Either the stock AT&T rom on this unit had something interfereing with root, or the root image I used in the toolkit has an issue. I'm leaning towards a toolkit issue since when I used it and it installed TWRP 2.4.1.0, I could not get into recovery, just a black screen.
I lieu of this, I'm limiting my use of the toolkit.
Curiously, the toolkit also allows a sideload via TWRP/CWM, but does not provide a driver. Windows 7 cannot recognize the phone in recovery mode with a custom recovery installed, although it does when a stock recovery is. I have yet to find a driver.

[Q] Tried rooting using Towelroot and chainfire but no joy

Hi Guys,
I am having some issues trying to root my Samsung Galaxy S3. I am currently running the stock Kitkat version of AT&T on my S3(SGH-I747) and trying to root it to be able to install CWM and a custom rom.
I have tried chainfire and towelroot methods.
I used the following tutorial of using ODIN and chainfire image for samsung SGH-I747:youtube.com/watch?v=LwsvPO8jVGE
I was able to get all steps to work and get everything same as the video above except when I install "Root Checker" from android play store it gave me message that "Root method is not properly configured" even after odin showed "Success" after rebooting and applying the patch
I then used the towelroot method by going to the towelroot.eu website on my phone and installing the apk. the towelroot app gave me the message that "I have root and do not need to reboot my device" but Root checker still says that my root is not configured.
I then reset my phone by pressing volume up+power and home button and clearing "Cache" and wiping data" and trying the above methods again but still unable to get the phone to root.
I am completely stumped as to what I am doing wrong. And would really appreciate some help from the pros.I have attached a snapshot of my device info and thanks for the great work and guidance.
Matt
PS. I already made sure that my phone is in the "Developer Mode" and "USB debugging" is enabled

tried another method
Also tried using the casual method but that also failed with the error "Unsupported device" here is the url for the log file:http://pastebin.com/vZRvYH3g
I followed the follwowing thread:
http://forum.xda-developers.com/showthread.php?t=2189536
amti366 said:
Hi Guys,
I am having some issues trying to root my Samsung Galaxy S3. I am currently running the stock Kitkat version of AT&T on my S3(SGH-I747) and trying to root it to be able to install CWM and a custom rom.
I have tried chainfire and towelroot methods.
I used the following tutorial of using ODIN and chainfire image for samsung SGH-I747:youtube.com/watch?v=LwsvPO8jVGE
I was able to get all steps to work and get everything same as the video above except when I install "Root Checker" from android play store it gave me message that "Root method is not properly configured" even after odin showed "Success" after rebooting and applying the patch
I then used the towelroot method by going to the towelroot.eu website on my phone and installing the apk. the towelroot app gave me the message that "I have root and do not need to reboot my device" but Root checker still says that my root is not configured.
I then reset my phone by pressing volume up+power and home button and clearing "Cache" and wiping data" and trying the above methods again but still unable to get the phone to root.
I am completely stumped as to what I am doing wrong. And would really appreciate some help from the pros.I have attached a snapshot of my device info and thanks for the great work and guidance.
Matt
PS. I already made sure that my phone is in the "Developer Mode" and "USB debugging" is enabled
Click to expand...
Click to collapse

After rooting with Towelroot you have to install SuperSU from the store. Then open and let it update its binary.
You dont need root to get cwm.

DocHoliday77 said:
After rooting with Towelroot you have to install SuperSU from the store. Then open and let it update its binary.
You dont need root to get cwm.
Click to expand...
Click to collapse
Hi Doc, I was able to follow one of your other treads at "http://forum.xda-developers.com/galaxy-s3-att/help/att-bricked-s3-help-please-t2817566/page2" and install TWRP. I think my issue was that the firmware had got upgraded to the NE4 and I was not flashing the correct bootloaders.
I do have one more question and I am not sure if it is a ROM related issue or a phone setting. I will understand if you think I should ask in the ROM thread. I flashed CM11 on the phone after installing TWRP and rooting with superSu. I noticed that the led buttons on the bottom of the phone are disabled(the back and the setting buttons) do you know if this is a changeable setting(pic attached)? I would hate to loose the screen-space at the bottom to the buttons and even though that's standard Kitkat layout I wont mind being able to use the phone led buttons to go back and change settings.
I installled the follwoing version of cm11: cm-11-20140805-SNAPSHOT-M9-d2lte.zip from (http://download.cyanogenmod.org/?device=d2lte)
Thanks for your help and guidance.
Matt

Im not sure about that one. I don't use CM so im not very familiar with all of its different settings. Someone else may have the answer for you though. If not, then ask in the rom thread like you mentioned.

[Q] SCH-I435 (Verizon) Anyway to get custom recovery?

Hello everyone, please be patient with me as I am relatively new to modifying phones. However, I have spent a good portion of the past 1-2 weeks looking into this problem on XDA + google, and I am at the end of my rope.
Here is my problem (I'm sure you already know):
I have no current solution to installing a custom recovery on my phone. I really just want custom recovery to restore FULL backups via Nandroid or equivalent.
Here are my questions:
1) In download mode, Odin has no problem flashing an official image/firmware (tar.md5) to the phone. Is it possible to create my own image of my phone into one file and flash it via Odin to my phone when I would like to restore? I have a feeling that something in the phone checks the hash of the image (I'm sure that I'm not saying it right), and that, considering my image would be twice the size of the official, there would be no way to make my image pass using collisions or what not. However, this would probably be my first choice after safestrap (assuming that won't work), so let me know.
2) I have read that certain people with phones similar to mine (not my variant though) have successfully "swapped" the external and internal SD cards. If I remember correctly they just change a couple lines in void.fstab. If this could actually be done, I could easily restore a backup to the now external internal SD, then change the settings to reswap on reboot. I feel like this is too good to be true though, as I have not seen this as a solution to my specific problem online. Is this actually a suitable option?
3) Currently my phone model is not an officially recognized device which Safestrap will work on. However, I have read that it is possible to do on my model using the Safestrap version which corresponds to a close variant of my phone. Can this be done? Please let me know if you have any information on this.
4) I guess this would be the last resort. I'm pretty good at taking things apart, but even better I can put those things back together Is the internal "SD" really just an SD card deep inside the phone? Would it be possible to replace that card for the purpose of backing up?
Here are my phone specs:
-Samsung Galaxy S4 Mini (SCH-I435)
-The carrier is Verizon Wireless
-Android Version 4.4.2 (kitkat)
-Baseband Version I435VRUBOC1
-Kernel Version 3.4.0 [email protected] #1 Fri May 23 2014
-Build Number KOT49H.I435VRUBOC1
-Hardware Version I435.05
-Configuration version B13.SAM.SCHI435.0
-Needless to say, phone is rooted and has busybox + etc correctly installed.
Any help will be greatly, GREATLY appreciated -- even if that help is telling me that it isn't possible. I can't seem to give up on this.
Thanks,
Kurt

Help
Does anyone have any advice on this? I would REALLY appreciate it. Thanks again.
-Kurt

I'm also interested on this. Thanks for your efforts

Nope no recovery because the Verizon minis bootloader is locked. It can be rooted with kingroot i think its called and then switched to SuperSU by replacing it.(I used super sume pro to get rid of kr) ****!!After root install a application like "disable application [root]" and disabe all Knox applications and any unused apps.(look for a list of recommended apps to disable)

Kannz2 said:
Nope no recovery because the Verizon minis bootloader is locked. It can be rooted with kingroot i think its called and then switched to SuperSU by replacing it.(I used super sume pro to get rid of kr) ****!!After root install a application like "disable application [root]" and disabe all Knox applications and any unused apps.(look for a list of recommended apps to disable)
Click to expand...
Click to collapse
How did you switch it over to SuperSU? I tried, but when it tried updating the root binaries it couldn't continue because of KNOX, so I was stuck with Kingoroot's.

I used this method to replace KINGROOT NewKingrootV4.50_C120_B220_xda_release_2015_07_22_105243 with supersu. most other versions i tried didnt want to cooperate and would make me lose root after one reboot. also i bought the pro version of supersume pro its 4$ off google play.

Kannz2 said:
I used this method to replace KINGROOT NewKingrootV4.50_C120_B220_xda_release_2015_07_22_105243 with supersu. most other versions i tried didnt want to cooperate and would make me lose root after one reboot. also i bought the pro version of supersume pro its 4$ off google play.
Click to expand...
Click to collapse
I tried it with the free version they linked to and it de-rooted it, so maybe I'll try later when I have enough Opinion Rewards credit to get the pro version. That or it doesn't work on this phone with Kingoroot. (The Google Play description says it should do Kingoroot though.)

Did you download the correct version? The one off the kingroot site doesn't work for me. It just deroots. I still have root on both of my s4mini Verizon phones. Try this link to get a working one.HERE scroll down a bit and the different versions are there. Try each one starting with 4.5. Also remember to restart after you root with kingroot and install super sume after the restart.

I just had to re-image my phone, so I did it according to your directions. (Though with the free version still of super sume) and it worked, although it won't update to the newest root binaries. It fails when I try. Did you have this issue? Other than that, SuperSU works.

I updated using "normal" and it worked fine for me. Glad su works at least. also for one phone I did a full unroot factory reset and then I reflashed a tar with Odin. Did the normal root with kingroot 4.5. Restarted tried a few root things like no frills cpu thing then installed super sume pro. Did stage 1. An 2 then supersu started up automatically it asks to update (I think net connection is needed) *do update "normal" because there isnt any recovery. Uninstalled kingroot like supersume says. Did a few root things then restarted. (Checked for superuser after reboot and it stayed)

Why won't SuperSU update on CM13?

My Tab Pro 8.4 has been bootloader unlocked since I got it months ago. It has always run a custom ROM, usually just CM12 nightlies with root from SuperSU flashed in TWRP and no Xposed or other "fancy" stuff installed. Since the CM nightlies shifted to CM13 I can't get SuperSU to "update" (the notice that says you must update SuperSU). I've tried reflashing, I've tried wiping and doing new installation from CM13, I've tried different versions of SuperSU. Nothing works to successfully install an updated SuperSU. I've never had this problem before. I've read everything I can find and found several places where something like this is being discussed, but no path to resolution. How can I fix this?

I believe SuperSU doesn't work in CM13. Just use the built-in root method. Open the developer options and use the root method in there.

Sicron said:
I believe SuperSU doesn't work in CM13. Just use the built-in root method. Open the developer options and use the root method in there.
Click to expand...
Click to collapse
I've tried using only the built-in root method. I set it to "both APPS and ABP" (or whatever that last option is). That's not enough for Root Explorer, not enough for PIE Control, not enough for AdAway, at least in my case. All those apps still indicate that I'm not rooted.

Both AdAway and Rootexplorer work fine for me. Actually, I haven't seen a root app that doesn't work with the built-in root.

Sicron said:
Both AdAway and Rootexplorer work fine for me. Actually, I haven't seen a root app that doesn't work with the built-in root.
Click to expand...
Click to collapse
Hmmm. Well, that'd be a great solution for me so I'll give it another go. Wipe wipe wipe, flash a CM13 daily, flash CM13 GAPPS, wipe Dalvic cache and cache, reboot. In Settings, enable Developer Options, set Root Access to Apps and ADB. Reboot. If that's not the recommended procedure I hope someone will let me know.

Sicron said:
Both AdAway and Rootexplorer work fine for me. Actually, I haven't seen a root app that doesn't work with the built-in root.
Click to expand...
Click to collapse
Well, maybe the problem I have is different than the one I THOUGHT I had. Wiped, installed CM13 daily, installed CM13 GAPPS, set Root Access in System/Developer Options/Root Access to Apps and ADB. I guess root access exists but I'm not sure. In Root Explorer I CAN switch folders from Read/Write to Read Only (normally a root only option) and AdAway installed and ran fine. BUT -- in PIE Control I still get "Can not, rooted only" when I try to use the "Back" command. There is often a "hashtag" (or "pound sign") symbol in the Status Bar, just as there would be if I needed to update SuperSU, but the symbol is on the far RIGHT and doesn't correspond to any message in the drop down box. Plus, I have never seen the pop up box that normally appears to ask me if I want to grant root access to an app or process. So, what am I? Partially rooted?

It has full root, sounds like the app needs updating for CM13 and / or other root methods. (not CM13's fault)

otyg said:
It has full root, sounds like the app needs updating for CM13 and / or other root methods. (not CM13's fault)
Click to expand...
Click to collapse
What I'm reading here makes sense but there must be another variable. My phone (Moto X Pure) is running a custom MM ROM, SuperSU DOES install and run just fine, I get all the expected root prompts and controls and the Back button (which requires root) works in PIE Control. I'm guessing, therefore, that the "problem" lies with CM13 as a specific MM ROM rather than with all MM ROMs. Time to flash a different MM ROM on my SM-T320.

Snapchat gives "login temporarily failed" error with CM ROM

Hey guys,
I've done some searching around on this issue, and it looks like Snapchat is not allowing me to login as my device is rooted. However, I had the factory OxygenOS ROM (rooted as well) installed before and never had this issue. Now that I have installed Sultanxda's "Unofficial CyanogenMod 13.0 with custom kernel", I can no longer get Snapchat to login. Like I said, from the searching that I've done it look like it is root related, so I went into SuperSU and did a complete unroot. This still hasn't solved the issue yet, so now I'm stuck and not sure what to do. Is there something I'm missing or is there a way to solve this without having to reflash a different ROM and loose all the time spent setting this one up?
Thanks for the help!

saleenman95 said:
Hey guys,
I've done some searching around on this issue, and it looks like Snapchat is not allowing me to login as my device is rooted. However, I had the factory OxygenOS ROM (rooted as well) installed before and never had this issue. Now that I have installed Sultanxda's "Unofficial CyanogenMod 13.0 with custom kernel", I can no longer get Snapchat to login. Like I said, from the searching that I've done it look like it is root related, so I went into SuperSU and did a complete unroot. This still hasn't solved the issue yet, so now I'm stuck and not sure what to do. Is there something I'm missing or is there a way to solve this without having to reflash a different ROM and loose all the time spent setting this one up?
Thanks for the help!
Click to expand...
Click to collapse
Hi, the searching can be useful sometimes
http://forum.xda-developers.com/search/forum/5476?query=snapchat
You need an fully unrooted rom to login into snapchat, after that you can flash supersu.

NevaX1 said:
Hi, the searching can be useful sometimes
http://forum.xda-developers.com/search/forum/5476?query=snapchat
You need an fully unrooted rom to login into snapchat, after that you can flash supersu.
Click to expand...
Click to collapse
Ah, looks like I just didn't search enough. This seems to have done the trick, thanks!

I think you just need to uninstall Xposed Framework for Snapchat to login and then after login you can install Xposed again.

This sounds weird but what worked for me was to download superkiwi via xposed installer, it's supposed to bypass root detection for banking apps in New Zealand but works with snapchat [emoji14]
I found this workaround in a thread somewhere and thought that it wouldn't hurt to try but actually works mighty fine!
Sent from my ONEPLUS A3003 using Tapatalk

Leaving this here in the hopes it helps someone else, took me a bit to find the correct steps.
Currently running the last official CM 13 build for the Droid Turbo (will be moving to LOS soon), rooted with SuperSU Pro, Xposed framework v87, on the newest TWRP.
Nothing worked, not Xposed Switch, Root Switch, nothing. In fact I had to reinstall Xposed Switch to be able to turn root back on, while Root Switch simply uninstalled the SuperSU binary, I had to reflash it. Finally I put it all together and in the following order I got Snapchat to work.
Make sure any OS root (my case CMroot) was turned off.
Download the correct version of Xposed framework Installer, Xposed Uninstaller, and the SuperSU binary (all flashable zip files) for your device to a location on your system that you can easily access from recovery. For me its my TWRP folder.
Uninstall Snapchat. Open a File Explorer and delete the entire Snapchat folder left over.
Select the uninstall "permanently unroot" option from SuperSU, but DON'T let it install the original... Whatever it is, the name escapes me. But don't let it!
Phone will reboot automatically after taking out root, boot to recovery, run Xposed Uninstaller, wipe Cache & Dalvik, reboot phone.
When the phone boots, confirm it is unrooted and Xposed Framework is uninstalled. A root checker app and opening the Xposed App worked for me here.
Install Snapchat, sign into Snapchat. It will accept your login if you did everything correctly.
*This step I did to save myself work in the future, but you can do it later. Turned on CMroot and took a TiBackup of logged in Snapchat in case I ever have to login again, I can just reload the data.*
Boot to recovery. Flash the Xposed framework and the SuperSU binary (in that order), wipe Cache and Dalvik, reboot system.
Open Snapchat to confirm its still logged in. If so grab a TiBack of it for use as needed later.
I hope this helps!
Sent from my DROID Turbo using XDA-Developers Legacy app