is there anyone else who has not had the latest update ? i just checked today and i am told i am using the latest firmware. i am hoping when it does arrive here..it gets rid of the mirrorlink issue and the lag (how can a powerful phone like this have lag)
flash30 said:
is there anyone else who has not had the latest update ? i just checked today and i am told i am using the latest firmware. i am hoping when it does arrive here..it gets rid of the mirrorlink issue and the lag (how can a powerful phone like this have lag)
Click to expand...
Click to collapse
I'm on 3 UK mate, and I flashed this one without any issue.
http://forum.xda-developers.com/g4/development/stock-h815-20d-images-kdz-flashable-t3301366
baileyjr said:
I'm on 3 UK mate, and I flashed this one without any issue.
http://forum.xda-developers.com/g4/development/stock-h815-20d-images-kdz-flashable-t3301366
Click to expand...
Click to collapse
I did too!I just deleted the cust folder to get rid of that annoying message on boot and all is smoooth!
Got so sick of waiting for three to update.
BadPotato said:
I am too!I just deleted the cust folder to get rid of that annoying message on boot and all is smoooth!
Got so sick of waiting for three to update.
Click to expand...
Click to collapse
Oh cool, I was looking for a fix for that. Just deleted it and got rid of the annoying popup. Thanks for that
baileyjr said:
Oh cool, I was looking for a fix for that. Just deleted it and got rid of the annoying popup. Thanks for that
Click to expand...
Click to collapse
No problem! glad I could help!!
thanks i may give this a shot..is it safe ? can i easy restore it has i am on contract with three.
thanks
flash30 said:
thanks i may give this a shot..is it safe ? can i easy restore it has i am on contract with three.
thanks
Click to expand...
Click to collapse
Yes just install it with LG UP
flash30 said:
thanks i may give this a shot..is it safe ? can i easy restore it has i am on contract with three.
thanks
Click to expand...
Click to collapse
yeah it's safe!
If you need to go back to stock you can use lgup to flash the stock three 10E Kdz from here.
http://storagecow.eu/index.php?dir=Xda/LG+G4/United+Kingdom/
i have downloaded mm LG-H81520D-Flashable.COMPLETE.zip installed lgup...my phone is showing got bin.file ticked went to add from the folder and there are no kdz file in the folder. so its not possible to do it this way without root
You've loaded the wrong file, follow the link further down to find the correct location for kdz file, untick bin once you have downloaded it to reveal kdz, don't forget to retick after along with upgrade!
---------- Post added at 05:38 PM ---------- Previous post was at 05:37 PM ----------
But would like to know how to get rid of the pop up box on boot up however! Anyone?
bootruss said:
You've loaded the wrong file, follow the link further down to find the correct location for kdz file, untick bin once you have downloaded it to reveal kdz, don't forget to retick after along with upgrade!
---------- Post added at 05:38 PM ---------- Previous post was at 05:37 PM ----------
But would like to know how to get rid of the pop up box on boot up however! Anyone?
Click to expand...
Click to collapse
Hey!
If you're rooted just use a file explorer and go to
/device
and delete the Cust folder
and then reboot.
that will stop the pop up from happening again.
If you're not rooted then I'm not sure you can remove it. There might be a way but I'm not sure
Can see the Cust. Folder from es file explorer, got about 6 folders in it, just delete the lot?
bootruss said:
Can see the Cust. Folder from es file explorer, got about 6 folders in it, just delete the lot?
Click to expand...
Click to collapse
Yeah that's it just delete the whole cust folder and it will all be good!
Ha, just tried and said couldn't be deleted, will have to root then! What method did you use?
bootruss said:
Ha, just tried and said couldn't be deleted, will have to root then! What method did you use?
Click to expand...
Click to collapse
I just flashed TWRP 3.0.0 and then flashed the latest chainfire BETA supersu v 2.67 zip
I just followed this guide
http://www.androidrootguide.com/2015/06/how-to-install-twrp-recovery-and-root-lg-g4-h815.html
But used the most recent TWRP and SUPERSU.
Have you already got your bootloader unlocked?
i have tried unticking bin file...ticking the bin file..tried has zip folder tried unzipping and all i get its blank i have looked in the folders and there is no kdz.
this is all i see 2 folders bootloader, meta-inf (inside many folders i get to android -update binary and updater script) under these 2 folders are boot, cust, modem,persist and system.
thats all i see
flash30 said:
i have tried unticking bin file...ticking the bin file..tried has zip folder tried unzipping and all i get its blank i have looked in the folders and there is no kdz.
this is all i see 2 folders bootloader, meta-inf (inside many folders i get to android -update binary and updater script) under these 2 folders are boot, cust, modem,persist and system.
thats all i see
Click to expand...
Click to collapse
Heya
DId you download he kdz file from here
http://downloads.codefi.re/autoprime/LG/LG_G4/H815/H81520D/
The KDZ isn't in the complete 20D zip it should just be one file.
Take it that you are rooted then because I wasn't, and I downloaded the kdz from further down the link. If you uncheck the bin box you can then drop down the file type box to include kdz. You can flash the zip file but lg up uses kdz or tot file.
bootruss said:
Take it that you are rooted then because I wasn't, and I downloaded the kdz from further down the link. If you uncheck the bin box you can then drop down the file type box to include kdz. You can flash the zip file but lg up uses kdz or tot file.
Click to expand...
Click to collapse
i will try downloading from this...no i am not rooted being on contract i dare not.
So am I, but it's done and works well, eating battery so far but have resisted a factory reset but should settle down. Go for it, pretty straight forward really.
Related
I'm running blazerROM 1.9 and this morning I wake up to it prompting me to update
It said the file was about 83Mb or so and I dismissed it and rebooted to make a nandroid backup. I find it under The "Update samsung software" button, and it shows me this screen (attaching).
What IS it? Surely its too small to be 4.1update, right?
Will it brick me if i try it with root and blazerROM? Will it even let me?
Should I flash back to stock, no root and stock recovery and try it?
Supra Man said:
I'm running blazerROM 1.9 and this morning I wake up to it prompting me to update
It said the file was about 83Mb or so and I dismissed it and rebooted to make a nandroid backup. I find it under The "Update samsung software" button, and it shows me this screen (attaching).
What IS it? Surely its too small to be 4.1update, right?
Will it brick me if i try it with root and blazerROM? Will it even let me?
Should I flash back to stock, no root and stock recovery and try it?
Click to expand...
Click to collapse
Let it run. It will fail and then it won't bother you again for a while.
To make extra sure it doesn't bother you. Go into your cache folder using root explorer and delete the update zip file.
The Root said:
Let it run. It will fail and then it won't bother you again for a while.
To make extra sure it doesn't bother you. Go into your cache folder using root explorer and delete the update zip file.
Click to expand...
Click to collapse
Thanks, I appreciate that info... But if it IS 4.1, I'd like to give it a try, and decide if I like it.... I would just play with my Fiance's phone for awhile, but for some reason she STILL hasn't received the notification, even when manually checking for the update.. Why is that?
It's NOT jb.
it's the LI3 update that they've been incrementally rolling out.
Just a few ICS bug fixes.
Supra Man said:
Thanks, I appreciate that info... But if it IS 4.1, I'd like to give it a try, and decide if I like it.... I would just play with my Fiance's phone for awhile, but for some reason she STILL hasn't received the notification, even when manually checking for the update.. Why is that?
Click to expand...
Click to collapse
It won't prompt you to update until google's servers have pushed the update file to your cache folder. The manual button only initiates the install if you have that file already, it doesn't poll the google server to request the file.
The Root said:
It won't prompt you to update until google's servers have pushed the update file to your cache folder. The manual button only initiates the install if you have that file already, it doesn't poll the google server to request the file.
Click to expand...
Click to collapse
That seems rather silly... why make a button that says "check for updates" that doesn't actually check? When DOES it actually poll for updates/get the file pushed?
Anyway, if I were to find this update.zip my cache Copy it, and put it in the same directory in HER phone, is there any reason it shouldn't work?
Supra Man said:
That seems rather silly... why make a button that says "check for updates" that doesn't actually check? When DOES it actually poll for updates/get the file pushed?
Anyway, if I were to find this update.zip my cache Copy it, and put it in the same directory in HER phone, is there any reason it shouldn't work?
Click to expand...
Click to collapse
rename the file "update." it'll keep the .zip extension. put on her sd card and run through stock recovery
The Root said:
rename the file "update." it'll keep the .zip extension. put on her sd card and run through stock recovery
Click to expand...
Click to collapse
I actually can't find it. Cache folders show empty in EStrongs.and you suggest it isn't actually titled "update"... Currently trying searches for files between 79&85mb (only found a piece of a nandroid so far) and all .zip which will undoubtedly yield a lot. Do you know the specific filename? The screen keeps nagging me saying its ready downloaded and verified... but I haven't found it yet..
And didn't find anything.
Where the hell's it hiding?!
Has everyone recieved the update? My wife got hers but I have not gotten mine yet...
Devtodi said:
Has everyone recieved the update? My wife got hers but I have not gotten mine yet...
Click to expand...
Click to collapse
Opposite problem here. I got it, girl.didnt
Can't find that damn file and its getting on my nerves. All estrongs will turn up is this...
When you enter root explorer it'll be in the first gift named cache. It's called something like "sph-l710 firmware update lg8 to li3.zip" if you installed it it gets deleted
I deleted it earlier but didn't pay attention to exact name.
Sent from my SPH-L710 using xda app-developers app
The Root said:
When you enter root explorer it'll be in the first gift named cache. It's called something like "sph-l710 firmware update lg8 to li3.zip" if you installed it it gets deleted
I deleted it earlier but didn't pay attention to exact name.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Found it. Apparently I forgot to give es root permission when I flashed blazerROM 1.9..
hello everyone, i recently bought a new htc one m8 .
Locked to Wind.
Now i rooted the phone, enabled s-off and unlocked it.
2 days later i downloaded titanium and accidentally deleted something i dont know what,
the phone worked properly still except i couldnt access settings, every time i clicked settings it would back me out. So me being the noob I am restored the phone, and that didnt work. So now I have a HTC One that cant go into settings.
I tried several tutorials telling me to flash the original stock rom onto it except I cant access USB Debugging since i cant access settings.
So am I screwed or is there anything I can do?
Would really appreciate any help?
humzamerz said:
hello everyone, i recently bought a new htc one m8 .
Locked to Wind.
Now i rooted the phone, enabled s-off and unlocked it.
2 days later i downloaded titanium and accidentally deleted something i dont know what,
the phone worked properly still except i couldnt access settings, every time i clicked settings it would back me out. So me being the noob I am restored the phone, and that didnt work. So now I have a HTC One that cant go into settings.
I tried several tutorials telling me to flash the original stock rom onto it except I cant access USB Debugging since i cant access settings.
So am I screwed or is there anything I can do?
Would really appreciate any help?
Click to expand...
Click to collapse
look in priv apps folder in system folder. is the settings apk in there ?should be settings.odex and settings provider file
---------- Post added at 05:37 PM ---------- Previous post was at 05:32 PM ----------
files are an odex and apk. if you deleted one you can replace from any similar rom. just download one and pull those files.
rbouza1 said:
look in priv apps folder in system folder. is the settings apk in there ?should be settings.odex and settings provider file
---------- Post added at 05:37 PM ---------- Previous post was at 05:32 PM ----------
files are an odex and apk. if you deleted one you can replace from any similar rom. just download one and pull those files.
Click to expand...
Click to collapse
Ok so im sort of new to this, how exactly would i do that step by step?
humzamerz said:
Ok so im sort of new to this, how exactly would i do that step by step?
Click to expand...
Click to collapse
get root browser app first. (play store )then go to system folder, then priv-apps folder. check for these files. settings.apk settings.odex and settings provider.apk and settings provider.odex
rbouza1 said:
get root browser app first. (play store )then go to system folder, then priv-apps folder. check for these files. settings.apk settings.odex and settings provider.apk and settings provider.odex
Click to expand...
Click to collapse
Problem is since theres no settings i cant connect to wifi which means i cant download anything from the playstore
humzamerz said:
Problem is since theres no settings i cant connect to wifi which means i cant download anything from the playstore
use your data, its a small file
---------- Post added at 05:56 PM ---------- Previous post was at 05:50 PM ----------
can you boot into recovery ? you dont have a backup ? maybe factory reset from recovery
Click to expand...
Click to collapse
rbouza1 said:
humzamerz said:
Problem is since theres no settings i cant connect to wifi which means i cant download anything from the playstore
use your data, its a small file
---------- Post added at 05:56 PM ---------- Previous post was at 05:50 PM ----------
can you boot into recovery ? you dont have a backup ? maybe factory reset from recovery
Click to expand...
Click to collapse
I dont have any data
Click to expand...
Click to collapse
humzamerz said:
rbouza1 said:
I dont have any data
Click to expand...
Click to collapse
if yer at pc ill upload root browser. put that on sd or phone, install it and look for those files.
Click to expand...
Click to collapse
rbouza1 said:
humzamerz said:
if yer at pc ill upload root browser. put that on sd or phone, install it and look for those files.
Click to expand...
Click to collapse
Once i put that on my memory card, how do I install it on the phone?
Click to expand...
Click to collapse
humzamerz said:
rbouza1 said:
Once i put that on my memory card, how do I install it on the phone?
Click to expand...
Click to collapse
Goto file manager and find it whr u put it.
Click to expand...
Click to collapse
JellyYogurt said:
humzamerz said:
Goto file manager and find it whr u put it.
Click to expand...
Click to collapse
Why don't you just flash a custom recovery such as TWRP then flash a stock backup?
http://forum.xda-developers.com/showthread.php?t=2701376
Click to expand...
Click to collapse
ashyt16 said:
JellyYogurt said:
Why don't you just flash a custom recovery such as TWRP then flash a stock backup?
http://forum.xda-developers.com/showthread.php?t=2701376
Click to expand...
Click to collapse
Firstly, I am not the op, so I do not get why you quoted me on that.
Secondly, the op alr said he restored his phone but it did not work.
Click to expand...
Click to collapse
JellyYogurt said:
ashyt16 said:
Firstly, I am not the op, so I do not get why you quoted me on that.
Secondly, the op alr said he restored his phone but it did not work.
Click to expand...
Click to collapse
I quoted you by mistake. Also when the op says he restored his phone I assume he means factory reset which will not restore anything deleted from the system partition. There's no reason why flashing a backup won't work unless he's done something to the partitions. He's S—off , boot loader unlocked so can't see why it wouldn't work if he uses the appropriate backup.
Click to expand...
Click to collapse
Hello. I have looked at the forum for how to install twrp on my Lg G3 D855 lollipop.
First I have rooted my phone withh this tool http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951, that worked fine now I read that I have to go to this http://forum.xda-developers.com/lg-g3/general/guide-update-to-lollipop-root-bumpd-twrp-t3048845 tread to install twrp, but I can't seams to figure this out.
1: Shuld I first unroot my phone and then use that other guide insted of the first one I used.
2: will the other guide then reset my phone so it will be like a new rom installation or what.
if some could clarify for me in "how to" install twrp on my phone or maby have a link where it already says how to.
SFMBE
I will try this, http://forum.xda-developers.com/showthread.php?t=3072767 seams to be the thing I looked fore, can any confirm this.
Thomaslje said:
Hello. I have looked at the forum for how to install twrp on my Lg G3 D855 lollipop.
First I have rooted my phone withh this tool http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951, that worked fine now I read that I have to go to this http://forum.xda-developers.com/lg-g3/general/guide-update-to-lollipop-root-bumpd-twrp-t3048845 tread to install twrp, but I can't seams to figure this out.
1: Shuld I first unroot my phone and then use that other guide insted of the first one I used.
2: will the other guide then reset my phone so it will be like a new rom installation or what.
if some could clarify for me in "how to" install twrp on my phone or maby have a link where it already says how to.
SFMBE
Click to expand...
Click to collapse
this is what I used
http://forum.xda-developers.com/showpost.php?p=59287063&postcount=1
BR7fan said:
this is what I used
http://forum.xda-developers.com/showpost.php?p=59287063&postcount=1
Click to expand...
Click to collapse
yes I have seen that but I dont know how to use this.
Will this reset my phone like a new rom or what, I tried the one i Linked earlier but that only gave me root but not the recovery, as what I can see when I try to enter recovery is says if I want to factory reset my phone and I was affraid to click yes there.
I'm also trying to figure out how to instal TWRP onto a LG G3 I'm coming from a LG G2 and it was a whole lot simple. So do I download the script onto my sd card then launch the exe from there? Thanks for the help!!
Thomaslje said:
yes I have seen that but I dont know how to use this.
Will this reset my phone like a new rom or what, I tried the one i Linked earlier but that only gave me root but not the recovery, as what I can see when I try to enter recovery is says if I want to factory reset my phone and I was affraid to click yes there.
Click to expand...
Click to collapse
it will only install recovery, it will not reset it like new. Its a very simple one click script.
Ok, I ran the one click that I linked and that seemed to install recovery, I didn't know how to enter it the correct way.
So I ran the script on my D852 all went good but when I try to boot into recovery mode by holding down button and power button all I get is red light blue light. Then pull the battery and it boots back into stock. Weird...does it hurt anything to try to run the script again?
Thanks for the help!
@beaver5963, seems like you missed something and got a secure boot error. It would be nice if you could provide more details. Did you get the correct kk firmware for your model? Appropriate custom recovery image (twrp)? Rest of the stuff looks quite automated... I used the previous version of imageprep btw.
Sent from my LG-D855 using Tapatalk
---------- Post added at 09:58 AM ---------- Previous post was at 09:21 AM ----------
[/COLOR @beaver5963, in case you do run the script again... It would be great if you log the messages produced.
Sent from my LG-D855 using Tapatalk
the link in OP's second post has worked like a charm for me.
also, just and fyi: http://forum.xda-developers.com/lg-g3/development/stock-t2961073 has up-to-date firmware releases
Hello Again,
So I downloaded a kitkat firmware for my d852 that came in TOT format. Does anyone have instructions on how to use the automatic script with a TOT file versus the KDZ file as it is different. Sorry for all the questions but I am just trying to learn all this stuff. Thanks for the help!
beaver5963 said:
Hello Again,
So I downloaded a kitkat firmware for my d852 that came in TOT format. Does anyone have instructions on how to use the automatic script with a TOT file versus the KDZ file as it is different. Sorry for all the questions but I am just trying to learn all this stuff. Thanks for the help!
Click to expand...
Click to collapse
@beaver5963, maybe you can look for a tot to kdz converter... Not sure if one exists.
Sent from my LG-D855 using Tapatalk
I got similar errors
ravi.vydianathan said:
@beaver5963, seems like you missed something and got a secure boot error. It would be nice if you could provide more details. Did you get the correct kk firmware for your model? Appropriate custom recovery image (twrp)? Rest of the stuff looks quite automated... I used the previous version of imageprep btw.
Sent from my LG-D855 using Tapatalk
---------- Post added at 09:58 AM ---------- Previous post was at 09:21 AM ----------
[/COLOR @beaver5963, in case you do run the script again... It would be great if you log the messages produced.
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
I also got red and blue lights when I tried to go into recovery and then got a boot configuration error. Anyway to fix this? I just updated to lollipop on verizon. If I can't get this to work, I'm going to say screw it.
...I guess you've tried https://play.google.com/store/apps/details?id=b007.autorecd855
currently for 855, 850, 852, ls990
Man are you kidding me? you resolved my problem with one link of an app? :highfive::highfive::highfive::highfive::highfive::highfive:
Miyagki said:
Man are you kidding me? you resolved my problem with one link of an app? :highfive::highfive::highfive::highfive::highfive::highfive:
Click to expand...
Click to collapse
haha...sad isn't it?
Gerhard.M said:
haha...sad isn't it?
Click to expand...
Click to collapse
rather beautiful than sad, isn't it ?
I guess you want me to put more complicated (more buttons etc? ) hehe
bender_007 said:
rather beautiful than sad, isn't it ?
I guess you want me to put more complicated (more buttons etc? ) hehe
Click to expand...
Click to collapse
complicated ?....missing the commodore era, sir? :laugh:
Gerhard.M said:
complicated ?....missing the commodore era, sir? :laugh:
Click to expand...
Click to collapse
Hehe, was asking because you said it's too simple
I hope you guys like it
bender_007 said:
Hehe, was asking because you said it's too simple
I hope you guys like it
Click to expand...
Click to collapse
....tnx but I don't use it.
btw never wrote 'simple'. However in the tangle of threads I apparently "helped" someone out, pointing a link. To me felt kinda sad, just like explaining what I meant........
have a nice day
I have LG Optimus Pro E980. It has KitKat 4.2.2 and I rooted it with towelroot last year.
I know very little about this but and I would like to upgrade to Lollipop but when I check for updates it tells me there are none. I assume this is because I rooted it and that I need to flash Lollipop.
I've never done this before and don't know if it is even an option.
Can you tell if I can do that?
If so, where are instructions and files to do that?
If I do flash and choose to remove all data will I lose the root and if so does towelroot work on Lollipop? I would really like to start fresh while doing all of this.
TY,
LInda
wunderlong88 said:
I have LG Optimus Pro E980. It has KitKat 4.2.2 and I rooted it with towelroot last year.
I know very little about this but and I would like to upgrade to Lollipop but when I check for updates it tells me there are none. I assume this is because I rooted it and that I need to flash Lollipop.
I've never done this before and don't know if it is even an option.
Can you tell if I can do that?
If so, where are instructions and files to do that?
If I do flash and choose to remove all data will I lose the root and if so does towelroot work on Lollipop? I would really like to start fresh while doing all of this.
TY,
LInda
Click to expand...
Click to collapse
US LG G Pro haven't gotten an official Lollipop update. only international versions that why its not bcause your rooted
wunderlong88 said:
I have LG Optimus Pro E980. It has KitKat 4.2.2 and I rooted it with towelroot last year.
I know very little about this but and I would like to upgrade to Lollipop but when I check for updates it tells me there are none. I assume this is because I rooted it and that I need to flash Lollipop.
I've never done this before and don't know if it is even an option.
Can you tell if I can do that?
If so, where are instructions and files to do that?
If I do flash and choose to remove all data will I lose the root and if so does towelroot work on Lollipop? I would really like to start fresh while doing all of this.
TY,
LInda
Click to expand...
Click to collapse
Since you're rooted, you can't install manufacture update with the update function. Doing so will put you in a world of hurt.
How do I flash kitkat again? I tried following these instructions: http://forum.xda-developers.com/showpost.php?p=44983841&postcount=1 but am really confused. I don't know what kdz file I'm supposed to use and I can't see the pictures that are mentioned in the instructions as how to set the settings in LG flash tool. For some reason they are not loading on the web page. Also, I see there is a tot file but I can't figure out how to use it. so, I'm lost here. I can't get my sd card (I started a thread about this). I either need to flash kitkat (which I assume will fix the sd problem) or find a way to fix the sd problem. Sure hope someone can help, and sorry for multiple threads.
wunderlong88 said:
How do I flash kitkat again? I tried following these instructions: http://forum.xda-developers.com/showpost.php?p=44983841&postcount=1 but am really confused. I don't know what kdz file I'm supposed to use and I can't see the pictures that are mentioned in the instructions as how to set the settings in LG flash tool. For some reason they are not loading on the web page. Also, I see there is a tot file but I can't figure out how to use it. so, I'm lost here. I can't get my sd card (I started a thread about this). I either need to flash kitkat (which I assume will fix the sd problem) or find a way to fix the sd problem. Sure hope someone can help, and sorry for multiple threads.
Click to expand...
Click to collapse
Follow this guide
irt118 said:
Follow this guide
Click to expand...
Click to collapse
Looks simple enough but where do I get the kdz file from?
TY!
wunderlong88 said:
Looks simple enough but where do I get the kdz file from?
TY!
Click to expand...
Click to collapse
Lg-firmware
irt118 said:
Lg-firmware
Click to expand...
Click to collapse
I don't see the US firmware? My Phone is US AT&T LG Optimus Pro E980
I found these: (from this thread http://forum.xda-developers.com/showthread.php?t=2438088)
USA AT&T E980
AT&T E980AT V10g http://downloads.codefi.re/houstonn/...PR-03-2013.zip
AT&T E980AT V10k http://downloads.codefi.re/thecubed/...-07-2013-0.zip
AT&T E980AT V10p https://drive.google.com/file/d/0B1A...it?usp=sharing
AT&T E980AT V20G
Not sure if one of these is the right one? If so which one and will it be a kdz file? I found tot files but don't understand how to use them.
hawkwind212 said:
Since you're rooted, you can't install manufacture update with the update function. Doing so will put you in a world of hurt.
Click to expand...
Click to collapse
Will my phone try to automatically update when there is an update?
Deleted
---------- Post added at 07:53 PM ---------- Previous post was at 07:48 PM ----------
wunderlong88 said:
I found these: (from this thread http://forum.xda-developers.com/showthread.php?t=2438088)
USA AT&T E980
AT&T E980AT V10g http://downloads.codefi.re/houstonn/...PR-03-2013.zip
AT&T E980AT V10k http://downloads.codefi.re/thecubed/...-07-2013-0.zip
AT&T E980AT V10p https://drive.google.com/file/d/0B1A...it?usp=sharing
AT&T E980AT V20G
Not sure if one of these is the right one? If so which one and will it be a kdz file? I found tot files but don't understand how to use them.
Click to expand...
Click to collapse
I don't know, but I think if you extract the zip file, you will get a kdz file
irt118 said:
Deleted
---------- Post added at 07:53 PM ---------- Previous post was at 07:48 PM ----------
I don't know, but I think if you extract the zip file, you will get a kdz file
Click to expand...
Click to collapse
Which one is the right one or what is the difference? I'm downloading one but to see what it extracts to but it is very large and taking awhile.
wunderlong88 said:
Which one is the right one or what is the difference? I'm downloading one but to see what it extracts to but it is very large and taking awhile.
Click to expand...
Click to collapse
V10 is 4.1.2 and V20 is 4.4.2
irt118 said:
V10 is 4.1.2 and V20 is 4.4.2
Click to expand...
Click to collapse
Ok...I'm downloading V20....hopefully it is kdz. I'll know in a few minutes. If it isn't I will still be needing help.
Thank you so much!
irt118 said:
V10 is 4.1.2 and V20 is 4.4.2
Click to expand...
Click to collapse
It's a tot file. Now what?
wunderlong88 said:
It's a tot file. Now what?
Click to expand...
Click to collapse
Follow the TOT method
irt118 said:
Follow the TOT method
Click to expand...
Click to collapse
Will I lose my root if I do this TOT method?
wunderlong88 said:
Will I lose my root if I do this TOT method?
Click to expand...
Click to collapse
you will lose it when you use TOT method and KDZ method.
irt118 said:
you will lose it when you use TOT method and KDZ method.
Click to expand...
Click to collapse
I didn't realize. So why don't I just factory reset if that is the case?
Will I lose my TWRP recovery, too?
THIS THREAD HAS MOVED!!!!!
Mods were supposed to move it to the guides section
Instead they just created a copy (lol!)
Please proceed single file to the following location:.
https://forum.xda-developers.com/galaxy-s8+/how-to/sampwnd-root-green-screen-corruption-t3673815
No running! There is room for everyone
:fingers-crossed:
Thankx ill give it a shot.
Update Just Flashed It It All Went Smooth.
Mark805 said:
Thankx ill give it a shot.
Update Just Flashed It It All Went Smooth.
Click to expand...
Click to collapse
\o/ any screen screwup issues yet? Does it feel any different?
No issue's yet and it feels less laggy noob question do i have to re do my build.prop
Mark805 said:
No issue's yet and it feels less laggy noob question do i have to re do my build.prop
Click to expand...
Click to collapse
Depends on what you did to it in the first place
I just disabled Knox nothing else is there any usefull setting i should add ? Sorry im new to android
Mark805 said:
I just disabled Knox nothing else is there any usefull setting i should add ? Sorry im new to android
Click to expand...
Click to collapse
You're fine then don't sorry about it. You don't want the combined build.prop anyway as the last thing they care about is performance when just setting up csc lol.
Also I could go on a 10 page rant about how 99% of build.prop tweets are 100% bs and are just people copy/pasting random config entries from other people's existing ones with 0 understanding of what they mean. I'll avoid that for now
Ok thanks will do...
Seems to work good. Sprint S8+ on QGL. Thank you for posting.
hey, could you kindly also upload devcfg, recovery and the abl?? you need all 4of these filesto replace the old combo firm partitions if u rooted with sampwnd
when i update i like to keep all 4 from same version toavoid issues.. might even run better for you lol
i amcurrently on AQG3 so yours is alater version
---------- Post added at 04:49 PM ---------- Previous post was at 04:44 PM ----------
wildermjs8 said:
You're fine then don't sorry about it. You don't want the combined build.prop anyway as the last thing they care about is performance when just setting up csc lol.
Also I could go on a 10 page rant about how 99% of build.prop tweets are 100% bs and are just people copy/pasting random config entries from other people's existing ones with 0 understanding of what they mean. I'll avoid that for now
Click to expand...
Click to collapse
lol u couldnt be more wrong bro, with combo firms ro.debuggable=1 the boot.img actually pulls prop values from /system (build.prop) which in turn sets em on boot, u can even change some ro props..
heck, you can disable knox, kap, tima etc. with buildprop alone.. ive also been experimenting with sys.boot_mode prop and others..hell if u set the wrong prop u can even end in a brick and have tostart over from scratch like i didlast night lol
Mark805 said:
I just disabled Knox nothing else is there any usefull setting i should add ? Sorry im new to android
Click to expand...
Click to collapse
After disabling knox, are you able to use android pay afterwards?
@elliwigy If you still need them I uploaded them to afh
https://www.androidfilehost.com/?fid=817550096634800073
Sent from my SM-G955U1 using Tapatalk
elliwigy said:
hey, could you kindly also upload devcfg, recovery and the abl?? you need all 4of these filesto replace the old combo firm partitions if u rooted with sampwnd
when i update i like to keep all 4 from same version toavoid issues.. might even run better for you lol
i amcurrently on AQG3 so yours is alater version
---------- Post added at 04:49 PM ---------- Previous post was at 04:44 PM ----------
lol u couldnt be more wrong bro, with combo firms ro.debuggable=1 the boot.img actually pulls prop values from /system (build.prop) which in turn sets em on boot, u can even change some ro props..
heck, you can disable knox, kap, tima etc. with buildprop alone.. ive also been experimenting with sys.boot_mode prop and others..hell if u set the wrong prop u can even end in a brick and have tostart over from scratch like i didlast night lol
Click to expand...
Click to collapse
That's not what I'm talking about, I'm talking about "supercharge your phone and quadruple your battery" thread with hundreds of lines of undocumented stuff that's either from jellybean and has been defaulted to the right thing since or in several cases is misspelled. I never said nothing was useful
dogredwing1 said:
@elliwigy If you still need them I uploaded them to afh
https://www.androidfilehost.com/?fid=817550096634800073
Click to expand...
Click to collapse
Thanks man. The whole combo firm is in the op now
dogredwing1 said:
@elliwigy If you still need them I uploaded them to afh
https://www.androidfilehost.com/?fid=817550096634800073
Sent from my SM-G955U1 using Tapatalk
Click to expand...
Click to collapse
Can this zip be flashed all together or does it need to be flashed separately?
mopartonyg said:
Can this zip be flashed all together or does it need to be flashed separately?
Click to expand...
Click to collapse
you need to extract the tar from the zip, cant flash the zip to my knowledge.. and yes, u can totally flash it.. you will end up unrooted and on full combo firm lol
the only files u need extracted from the combo firm are boot, recovery, devcfg and abl
elliwigy said:
you need to extract the tar from the zip, cant flash the zip to my knowledge.. and yes, u can totally flash it.. you will end up unrooted and on full combo firm lol
the only files u need extracted from the combo firm are boot, recovery, devcfg and abl
Click to expand...
Click to collapse
I have those 4 files in a zip but not sure how to use or flash them.
mopartonyg said:
I have those 4 files in a zip but not sure how to use or flash them.
Click to expand...
Click to collapse
u dont make a zip u put them into a tar.. so select the 4 files then add to archive select tar then pop it in comsey odin lol
elliwigy said:
u dont make a zip u put them into a tar.. so select the 4 files then add to archive select tar then pop it in comsey odin lol
Click to expand...
Click to collapse
Sorry to be a noob here which odin slot is the tar flashed in?
Installed this but still getting green screens