Bluetooth Moto360 disconnect/out of range > alarm goes on telephone - Moto 360

I'm satisfied with my Moto360 1st gen although I've just one problem I can't figure out. When I'm out of range from my telephone, my telephone starts making a loud beep noise. I guess it has something to do with my phone being out of range but I would like to turn this off so it won't happen again. Is there a solution for this?

Related

stereo headset transfers ring to headset, phone doesn't ring

I have the i-mate JASJAM (i.e. Hermes) which has A2DP. I bought the Jabra BT8010 stereo headset with headset profile and stereo profile. When I pair the two, every sound from the phone automatically gets transferred to the headset, which means the phone doesn't ring because the ringtone is also transferred. If I don't have the headset on I don't hear the phone ring.
I spoke to Jabra, they said I have to configure the phone somehow because the headset "just accepts whatever the phone sends".
Any ideas?
hey, same problem here
i have tried a few A2DP headsets(from other manufacturers)and with all of them the ring is streamed to the headset!
can any one help?
Are you kidding me? that's just one of the best things. How else do you know when you have a call when listening music? And why leave the headset paired when you don't use it? if you don't listen to music don't switch on the headset.
I don't always have my headset on my ear, I want the phone to ring. If the headset is disconnected, the phone doesn't always transfer an existing call to the headset if I turn on the headset only after the call has started.
So, I want to know if there is a way not to transfer the call ring (and all other device sound besides the call itself) to the headset...
hi Tsabar
Is the duration of your ringtone set to max?
My ameo rings over BT via my sony BT headphones and then rings half way thru via the phone's loud speaker
imaginarynumber said:
hi Tsabar
Is the duration of your ringtone set to max?
My ameo rings over BT via my sony BT headphones and then rings half way thru via the phone's loud speaker
Click to expand...
Click to collapse
yeah, it just keeps ringing in the headset only
I would also like to know how to make the phone ring when the head set is plugged in.
I don't always have the headset in my ears but still want to hear the phone ring. There must be a setting to allow this somewhere.
Any ideas?
exact same problem here
using a htc mozart .. my bt head set picks up all sound, not only music and convo.. so i dont hear if someone calls me unless i wear my headset in my office at all times or turn it off with the need to turn it on (waiting forsync) whenever someone calls me...
thats absolutely stupid, who is the numbwit at Microsoft that got that idea?
actually the sounds (and lack of profiles realy need some work) im using this phone as a 3g business phone including mail, and evrything else..
now im also using the alarm feature but guess what you cannot make it "alarm only" you have to accept all the stupid notification sounds if you want to hear the sound of the alarm.. or like me disable the notifications from t.ex mails to avoi being woken up at night from that.. its so lame.
i can see that a low of features could be refactored on modern dauy phones.. but the win 7 mobile realy disnt do the job (yet).. i would rather wait for office support if i could have profiles..
another realy lousy thing is that you have to buy office 2010 including outlook to sync contacts ..older versions DONT work

With headphones can I have the phone muted?

OK
When I have my headphones in I want to be able to hear a new email come in and if it rings, so have the phone on a loud setting.
Trouble is, this also makes the phone be loud and disturbs people around me with it blasting out of the speaker.
Can the phone be made quiet and still have it all through the headphones?
Ta
I don't know what is different on your side, but when a notification comes through while I have my headphones on and listening to music, the music dims, notification goes on and music goes back to normal. With an incoming call the music dims the same and the ringtone also plays through the headphones. When the call is finished, you just go on with the music.
Eugene's Mac said:
I don't know what is different on your side, but when a notification comes through while I have my headphones on and listening to music, the music dims, notification goes on and music goes back to normal. With an incoming call the music dims the same and the ringtone also plays through the headphones. When the call is finished, you just go on with the music.
Click to expand...
Click to collapse
Mmm interesting. So is your phone completely silent when this happens?
I've tested again and can't get my phone quiet but have notifications playing.
with your headphones plugged in - do you get a the headset icon on the top of the screen?
hot-fuzz said:
Mmm interesting. So is your phone completely silent when this happens?
I've tested again and can't get my phone quiet but have notifications playing.
Click to expand...
Click to collapse
Yep. Tried it with physically connecting and via bluetooth and both times get the icon and both times plays through phone and headset.
Can anyone test theirs to make sure is not just me ...... Or if its Mr and I'm doing something wrong.
Ta
if you are using the headphones supplied from htc then i am not sure, if you are plugging in standard headphones direct then read this thread had similar problems and solved it with a £1.00 cable,
http://forum.xda-developers.com/showthread.php?t=667240
It also does this when connected with bluetooth which has no connection to the socket.
Does yours mute the phone?
No one has actually said if this happens to them or not yet.
My phone doesn't mute the external speaker when the original headphone jack is connected either.
I would have thought this is quitea big flaw. Who wants to hear the phone when you gave your headphones in?
AlsoI find it odd thatI haven't seen many people talking about the same issue.
It must be something that you have installed on the phone, I actually had a few bugs here and there with the phone in the beginning until i done a factory wipe on it and started again I was having a problem with the music player only playing until the screen timed out then stopping the music giving me a minute of music. never did solve it, reset the device and its never happened again.
Basically when i play music on mine it it will play through the speaker on the phone, then when i plug in the headphones it will play through the headphones muting the phone, in point of fact i cannot get it to play through the headphones and the onphone speaker at the same time at all. Then when the phone rings the ringing will be heard in my headphones and also it will sound on the phone at the same time turning my music down at the same time. then once the call is finished the music resumes automatically.
Either your phone is playing silly beggars like mine did in the beginning or you have an app installed that is causing the problems. if you reset it back to default and the problem still occurs then you may have a faulty handset.
Sorry I'm not quite sure I made myself clear.
If I have my headphones inI don't want anything to come from the phone speaker. Something that doesn't happen. I get the ringing and all notifications through my headphones aswell as the phone.
Why would you want the phone to blast out when someone calls out every time you get a text or email if you have headphones on? I'm glad I don't commute.
my phone's external speaker makes no noise with headphones attached..
hot-fuzz said:
Sorry I'm not quite sure I made myself clear.
If I have my headphones inI don't want anything to come from the phone speaker. Something that doesn't happen. I get the ringing and all notifications through my headphones aswell as the phone.
Why would you want the phone to blast out when someone calls out every time you get a text or email if you have headphones on? I'm glad I don't commute.
Click to expand...
Click to collapse
micks_address said:
my phone's external speaker makes no noise with headphones attached..
Click to expand...
Click to collapse
OK cool.
So is that with official headset?
Can you then hear the notifications and ringing through your headset and the phone silent?
Is your profile on " normal" ?
Sound profile is on normal.. i am using sony headphones.. (the standard ones are not great to be honest) i also use nuforce ne8s... same story..
yes i can hear notifications through the headphones.. like when a text etc comes through
Thanks,
Michael
hot-fuzz said:
OK cool.
So is that with official headset?
Can you then hear the notifications and ringing through your headset and the phone silent?
Is your profile on " normal" ?
Click to expand...
Click to collapse
Ta.
It would appear that I have a dodgy handset then.
As I did a factory reset just now.
I've tried with various headsets wired and Bluetooth and can't get it to be silent with headphones attached.
I'm going down to cpw tomorrow to sort it.
Ta
And so Michael it would appear that from what haggisuk99 is saying above, he too had a dodgy handset aswell as ragwo
Anyone else able to have headphones connected, have someone ring them and the ringing ONLY be heard in the headphones NOT from the phone ?
hot-fuzz said:
And so Michael it would appear that from what haggisuk99 is saying above, he too had a dodgy handset aswell as ragwo
Anyone else able to have headphones connected, have someone ring them and the ringing ONLY be heard in the headphones NOT from the phone ?
Click to expand...
Click to collapse
I don't believe I have a dodgy headphone socket as I have never had any issues with my headPHONES when using them with the Desire.
But I also confirm that the Ringtone plays in both the headPHONE and through the speaker, i.e. the speaker is not muted as it was on my previous WinMo phone Touch Pro/Raphael.
Now whether this is by design or a bug is the real question. I couldn't believe this is by design, but you never know!
I doubt its the headphone socket, something to do with software possibly ?
Ive got a mate to test his aswell, results to come later.
So now, that's 4 in this thread with the same issue.
And if i dont hear anything later, i will go into CPW tomorrow to try their stock ones.
I wrote to htc with my problem and got this reply. To be fair it only took 3 days for a reply.
Not sure they got it completely as I'm more interested in notifications playing out more than ringing.
If you agree with me please email HTC.
ta
Hi
Thank you for contacting us. In respect of the query that you have raised regarding the functionality of the HTC Desire speaker when using headphones, we must advise you that this is the correct operation of the device by design. Most customers would find it inconvenient and uncomfortable to have notifications and ringtones coming through their headset when they are listening to music (which is the primary purpose of connecting the headphones). Also, it is considered that when you are in a quiet environment, it is not useful to be able to hear the phone ring as you would not be able to talk. It is recommended therefore that you set your phone to vibrate mode. Although we greatly appreciate your suggestions and will pass these on to our software development team, for the above reasons it is highly unlikely that this functionality will be changed. If you require any further assistance, please do not hesitate to contact us again.
Kind Regards

Bluetooth call volume is too low

I rarely make calls in my car, so I do not know if this was much of an issue on my older head unit*, or if it was a symptom prior to root.
I have a new unit from Pumpkin - MTC8-KLD6-V2.81
Rooted with Malaysk's latest ROM
My phone (HTC M8) is connected through bluetooth. Music plays just fine through the system.
When I make a call, however;
1) Music Stops and head unit goes silent (not a problem)
2) I hear a bit of static (I have had low volume static since I upgraded to Malaysk if the head unit is on and nothing is playing)(again, not really a problem)
3) Phone starts to make a call.
4) Static suddenly goes away, as if the volume was suddenly turned down
5) I can barely hear the phone ring through the head unit.
I have tried turning up the volume all the way on the phone (volume on the phone seems to do nothing when in a bluetooth call) and turning up the head unit. If I have the head unit all the way up, I CAN hear reasonably well, but that's at a volume of 30 when everything else plays loud enough at 5.
I have looked for different setting on the phone and on the head unit and have found nothing. I have adjusted the Factory Settings -> Audio, but that changes bluetooth as a whole and make the music play too loud.
I would say that the issue is is similar to switching the phone from "regular" (where 1-10 is set for being near one's ear) to "speaker" (where 1-10 can be heard across the room) and the phone is telling the head unit to stay at "regular".
Actually, on my first head unit the problem was just the opposite and phone calls were always way too loud.
Anyone have ideas on other settings I should try?
Thanks
I think there are options in the factory settings are for individual volume controls.
singlecell83 said:
I think there are options in the factory settings are for individual volume controls.
Click to expand...
Click to collapse
There are, but the option is for "Bluetooth" in general.
Bluetooth itself is fine, and I can listen to music from my phone through Bluetooth at whatever level I choose. The problem is that when it switches to phone (dialing out or coming in) the volume drops drastically and I have to turn the head unit's volume up all the way to hear at all. That means the music from Bluetooth will come back at speaker (or at least ear) damaging levels once the call ends.
If adjusting the BT volume is not enough, test with others volume settings lowering/raising some of them.
the norm is the hands free on these units are not the best and there are some mods out there on the forum..

Speakerphone turns off mid call ....

I cant figure out why this is happening but when i am in the call on speakerphone the phone will sometimes just turn off speaker and revert to the phone earpiece but the software still thinks its in speaker mode thus the only way to go back to speaker is to change the audio to handset first then reenable speaker.. this can sometimes happen several times withing a single call. I also have an android wear watch that is paired via bluetooth which i though may be the culprit but i have noticed it even when my watch is dead... anyone else?
Having same issue when connected to Bluetooth in my car. It will change output and I have to manually put it on phone headset then back. Sometimes it will just drop a call all together. Usually 6 minutes approx into the call. I am on Verizon 7.1.1. NMF260. Anyone else still having these issues on most recent update as I am.
Yeah I noticed it to. Thought it was my Android wear watch so I turned off gestures thinking the wrist movements were switching the output. I haven't had a chance to retest.
Sent from my Pixel XL using Tapatalk
I am going to resurrect this thread because I'm having the same issue and it's one of the most infuriating things ever. To have my private conversation suddenly switch to speakerphone, or to be in the car and have it switch from car speakers to speakerphone is frustrating beyond words!
I have the issue as well. Sometimes it happens when another calls comes in or when a notification comes in, but also happens randomly. Pixel 2, Android 9.
Back from the dead
Odd bug, any mention of it on the bug tracker?

Alarms not sounding

This is a problem I've had on and off for a while, maybe since Wear 2.0 but can't be sure
More often than not, the alarms I set on the watch vibrate but no sound.
If it's relevant I have Watchmake installed and usually have one of WM faces showing
Also, I don't really use it for connections or notifications from my phone, so Areoplane mode is usually on for the watch and the watch is disconnected in Wear OS on my phone. Also, I tend to switch off the screen to save battery, but alarms do work in this scenario and when they work, I get vibration, display comes on and sound. When they don't work properly, I just get vibration, no sound and no display.
As I say, I had it working most of the time for about a year but recently its gone belly up again and I only get vibration for alarms. I've done factory resets on the watch and sometimes I get sound etc, sometimes I don't.
Anyone else experiencing this and/or any suggestions?
Thanks

Categories

Resources