ODIN MODE vs KIES, IS THIS TAB S SM T800 BRICKED? - Galaxy Tab S Q&A, Help & Troubleshooting

Hello All-
Things were great and I was getting settled into the new tab when one morning it just crashed.
Todaqy, I am am staring at a screen that says
ODIN MODE
Product Name SM t800
current binary: samsung official
system status: official
Secure Download: enabled
Knox Warranty void:0 (0x0000)
AP swrev: a1
So I think I need to flash this device as it will no boot.
Occasionally I can get it to run the samsung logo, the logo starts flashing , and then the screen goes dark.
Any advice on next steps would be appreciated.
Ed

Related

Note 2 Bricked - can't unbrick

Hi Guys
My note 2 GT-7100 won't turn on anymore as soon as I turn it on I get the screen with "Firmware upgrade encountered an issue. Please select recovery mode in Kies $ try again.
I got this after I was trying to install the latest firmware on my note 2. The file I firmware I downloaded is N7100XXUEMK9_N7100OXXEMK4_OXX
I tried to reinstall it with Odin but it always gives me an error then I did some search online and tried with Kies as well but when it gets to the update it tell me that I can't do the update.
What should I do?
If I go on download mode the screen has written this :
ODIN MODE
PRODUCT NAME : GT-N7100
CUSTOM BINARY DOWNLOAD : YES (5 COUNTS)
CURRENT BINARY : SAMSUNG OFFICIAL
SYSTEM STATUS : CUSTOM
KNOX WARRANTY VOID : 0
RP SWREV : A2
What should I do to unbrick it?
Thanks
americo85 said:
Hi Guys
My note 2 GT-7100 won't turn on anymore as soon as I turn it on I get the screen with "Firmware upgrade encountered an issue. Please select recovery mode in Kies $ try again.
I got this after I was trying to install the latest firmware on my note 2. The file I firmware I downloaded is N7100XXUEMK9_N7100OXXEMK4_OXX
I tried to reinstall it with Odin but it always gives me an error then I did some search online and tried with Kies as well but when it gets to the update it tell me that I can't do the update.
What should I do?
If I go on download mode the screen has written this :
ODIN MODE
PRODUCT NAME : GT-N7100
CUSTOM BINARY DOWNLOAD : YES (5 COUNTS)
CURRENT BINARY : SAMSUNG OFFICIAL
SYSTEM STATUS : CUSTOM
KNOX WARRANTY VOID : 0
RP SWREV : A2
What should I do to unbrick it?
Thanks
Click to expand...
Click to collapse
Ru using original samsung cable that came with note 2 r else some other cable??
Its vwry hard to really brick a phone now days especial the way you telling, ser if you have a friend that understand what is doing better then you and will work again....dont take me bad ....
First of all change USB port if still don't work then change pc

Samsung galaxy s4 mini GT-I9195I

Hello.
I have a problem... I recently tried to root my samsung. I used odin and all went well. It said that it had succeeded. But my device didn't reboot and is now stuck in a bootloop. I used this root: "https://androidmtk.com/root-samsung-galaxy-s4-mini-gt-i9195"
and now it's saying:
Could not do normal boot
ODIN MODE
Product name: GT-I9195I
Current binary: Custom
System status: official
Reactivation Lock(KK): OFF
Knox Waranty void0x1(4)
Qualcomm Secureboot: Enable (CSB)
RP SWREV: s1, t1, H1, R1, A1, PI
Secure download: enable
and my computer doesn't recognize it, but if i pull out the battery and boot it into ODIN mode it does recognize it.
any suggestions to what may have gone wrong or maybe how to fix it?
Fixed
there is no root for GT-I9195I/samsung galaxy s4 mini plus yet, but there is a recovery file, so if you have problems or you've tried to root with a wrong version i found this link: "http://forum.xda-developers.com/galaxy-s4-mini/development/recovery-cwm-twrp-philz-t3182207" there is also files for GT-I9192I i hope i'm helping someone out there.
There is a way to root on I9195I
http://forum.xda-developers.com/galaxy-s4-mini/general/index-galaxy-s4-mini-i9195i-t3283053
Used this method myself and it works great.
KingRoot latest version + Super Sume work fine, even for the most recent firmware.

Help with S4 mini duos (bricked?) not flashing with odin

Hi there, I found a s4 mini duos i9192 that it's stuck on logo, and when I try to flash it with odin it gets stuck on "initializing" and doesn't flash at all, not roms or recovery. Also I can't get in recovery, by pressing power + vol up + home button all I get is vibration.
When I enter download mode I see this:
ODIN MODE
Product name: GT-I9192
Current Binary: Samsung Official
System Status: Official
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x0
CSB-Config-LSB: 0x30
Bootloader Ap Swaev: 2
Write Protection: Enable
According to Kies it was running on I9192UBUCOI2_I9192UUBCOC1_I9192UBUCOI2 (TTT) so I tried to flash that one, along with many others, still the same. Tried with other usb ports, other cables, another pc running a different version of windows, still the same, odin does nothing. Any help?
Thanks in advance.
i got it too but probably emmc is damaged or you have messed up with partitions

PLEASE HELP with Samsung Galaxy Tab Pro 12.2" SM-T900 WiFi USA version

Hello,
I am looking for help and guidance with a Samsung Galaxy Tab Pro 12.2" SM-T900 WiFi USA version I received. I bought this tablet from a pawn shop in a AS IS state. When I plugged the device in to charge, the screen illuminates, then I would see the Galaxy Tab Pro logo screen but then it would shut off and then just loop over and over. The device will not boot into recovery mode, when I try I receive the following message; recovery is not seandroid enforcing. The device will boot into download mode and Odin recognizes the device however when I attempt to flash the tablet with a stock firmware I immediately receive the following error; There is no PIT partition. The only PIT file I could find for this device is this file; V2WIFI_EUR_OPEN_HIDDEN50M.pit but it does not seem to work. Any help this community could offer me at this point would be greatly appreciated. Thank you in advance for your help.
Mark
Look here https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Use samfirm to download low_ship (3-files) firmware, it already contains a proper pit in csc.

Saving a KNOX-tripped Samsung S4 Mini, stuck at Samsung logo, via non-stock-rom?

My Samsung Galaxy S4 Mini (i9195) went into coma "by itself" (when only charging) one year ago. Since then it is stuck at the white Samsung logo.
KIES can´t get any contact with the phone at all.
When I use Odin to install stock firmware it got stuck on ”aboot.mbn”, and after a minute or two: ”FAIL”. After that the phone doesn´t boot to logo, just says that loading firmware failed, try again, until I load the "pit-file" and the phone boots to Samsung logo again...
Also tried this trick...
[RECOVERY][ROOT] Samsung Galaxy S4 Mini LTE (GT-I9195)
WARNING! ONLY USE THIS ON THE GT-I9195 MODEL! Hello all S4 Mini owners! I'm happy to finally release ClockworkMod recovery and an insecure kernel for the GT-I9195. With these two installed on your device, obtaining root is easy. Attached to...
forum.xda-developers.com
...but it got stuck at "recovery.img", and then "FAIL". but after that experiment (and a new pitfile-loading) the Recovery mode only shows "recovery booting" and "Set Warranty Bit: recovery" but no menu and nothing more happens. I can still use the menu for downloading via Odin. Text in upper left corner:
Odin Mode
Product name: GT-I9195
Current binary: Custom
System status: Official
KNOX Kernel lock: 0x0
KNOX Warranty void: 0x1
CSB-Config-LSB: 0x30
Bootloader AP SWREV: 2
Write protection: Enable
KNOX seems ”tripped” so I guess it´s no longer possible to flash any stock rom:
The flash memory could have died, but even if the phone is nearly nine years old, it is not used much, and I can write at least some bytes to the flash memory.
Is it possible to save a KNOX-tripped phone which gets stuck at Samsung logo via some non-stock-rom? And if so; How?

Categories

Resources