I just installed CM12.1 adn GAPPS, but the "guide" wont work. After I've saved my WiFi settings, it goes to Tap&Go part. I don't use that, so I skip it, and then it says that "Unfortunately, Google Play Services has stopped" and goes back to the WiFi options. I can't start using my just flashed CM12.1
Any help? I can't use my phone.
Do you have the recommended recovery version for lollipop installed?
Do you have Gapps for CM12? Did you flash zip? (NOT install apk)
Did you wipe cache/dalvik etc?
If all else fails reinstall but make sure you have latest files/recovery etc and right ones e.g. if you have i9195 don't use i9195I ones!
Related
Friends
I have a HTC Desire HD, unlocked but S-ON, and I recently upgraded to cm-11-20140710-unofficial-M8.1-ace. Most things seems to work fine but I got a bit confused as to which version of GApps to install?
I installed the version found on the cyanogenmod.org /Google_Apps page, ie the latest, the 20140606 CM 11 version. It installed but gave me several errors about this or that crashing when I rebooted. After a few more reboots then finally it seems to have settled down a bit, and I get much less errors. But I still have problems using the Google Play store, partly maybe because I am in China and they seem to block it sometimes.
I noticed that when I installed the version of GApps I got, it said it is for Android 4.4.3 and not 4.4.4 which is the one I have installed. Could that cause problems?
Anyway, is that version of GApps correct, or should I find another version somewhere else? I would have asked at the developer forum but I am not allowed to post there.
Thanks
Calle
Try banks gapps minimal 4.4.4
marknoll said:
Try banks gapps minimal 4.4.4
Click to expand...
Click to collapse
Thanks for the good suggestion.
I downloaded it just now, but now I am not sure what to do next.
Can I just install it over the existing GApps installation through recovery? Will that take care of the one already installed?
Thanks
Calle
Just boot to recovery ,clear cache and dalvik and install. Then reboot
marknoll said:
Just boot to recovery ,clear cache and dalvik and install. Then reboot
Click to expand...
Click to collapse
Thanks a lot, that was good. But then I ran into another problem, a more serious one.
When I try to call it says "Unfortunately Dialer has stopped". I cannot call anyone. Neither can I receive calls, even when the phone is ringing!
I can send and receive SMS though.
The rest seem to be working ok, except that Google Play Store is extremely slow and I do not seem to be able to d/l any app.
Should I try some other GApps package or go back to some earlier version of Android? I need to be able to make phonecalls.
Thanks
Calle
Update to one of latest recovery;Otherwise you'll surely get an ERROR.
To do;
-Flash Full Wipe zip
-Flash Rom(M8.1)
-Flash GApps(4.4.4)
-Flash boot.img(via fastboot)
-Reboot system.
Version details;
-20140612 was last unofficial-4.4.3 before major changes has been made.
-20140618 was the last build with 4.4.3
-20140710(M8.1)
-20140804(M9)
I would just reflash ROM and install latest 4.4.4 gapps
Using Odin/towelroot/twrp I was able to flash CM12 on my tab pro 8.4 but after flashing gapps none of the google apps actually work - they all say that google play service is required. I tried flashing different gapps packages and also directly installing just the google play services APK.
I done a full wipe then attempted to reflash CM12 but the flash would just hang on "skipping md5 verification" or whatever it says and nothing is ever shown on the progress bar. Only way of getting out is to hold the power button and turn the tablet off which of course breaks it. Luckily I can use odin to flash the stock firmware and have my tablet working again. However I was very impressed with the new android and would really like to run it. Is there a way to flash CM12 with odin?
Thanks.
No help? Is it possible to use goomanager on these tablets?
Leedy818 said:
Using Odin/towelroot/twrp I was able to flash CM12 on my tab pro 8.4 but after flashing gapps none of the google apps actually work - they all say that google play service is required. I tried flashing different gapps packages and also directly installing just the google play services APK.
I done a full wipe then attempted to reflash CM12 but the flash would just hang on "skipping md5 verification" or whatever it says and nothing is ever shown on the progress bar. Only way of getting out is to hold the power button and turn the tablet off which of course breaks it. Luckily I can use odin to flash the stock firmware and have my tablet working again. However I was very impressed with the new android and would really like to run it. Is there a way to flash CM12 with odin?
Thanks.
Click to expand...
Click to collapse
Make sure you use LP gapps and not kitkat gapps.
Wipe system and factory reset / wipe data, install cm, install gapps, reboot. That is all that is needed.
crpalmer said:
Make sure you use LP gapps and not kitkat gapps.
Wipe system and factory reset / wipe data, install cm, install gapps, reboot. That is all that is needed.
Click to expand...
Click to collapse
I was using lp gapps. The problem is now I cant install anything from any recovery. Tried twrp and cwm with the same result, it says no md5 fou d skipping validation then just hangs there and never makes progress on the bar even after setting for some time.
The only reason my tab didnt get bricked is thankfully it was able to go into download mode and flash a stock rom with odin.
Got it flashed and this time gapps worked first try! After enable mtp it worked first try. Loving cm12 so far this is how this tablet should perform out of the box.
Could you explain how you manage to fix that ?
I'm currently having the same issue with my 8.4 tab pro wifi cm12-20150108-nightly.
I'm having the same issue here. What GAPPS APK are you guys using as well? I was on 6.5.99 (-036) and it wasn't working. I'm going to try 6.5.99 (-436) next.
Edit: flashing (-436) didn't fix it.
I got an update for cm12.1 snapshot on my Samsung galaxy mini i9195 after i got the update google play store wasn't working so I installed gapps for cm12.1 from the official webpagehttps://github.com/cgapps/vendor_google/blob/builds/arm/gapps-5.1-arm-2015-07-17-13-29.zip this is the link that I used now nothing is working i get errors from all the google apps and also from setup wizard when i press the home button. How can i fix this problem? and if there is another gapps file can someone guide me to it, please?
tomt003.310 said:
I got an update for cm12.1 snapshot on my Samsung galaxy mini i9195 after i got the update google play store wasn't working so I installed gapps for cm12.1 from the official webpagehttps://github.com/cgapps/vendor_google/blob/builds/arm/gapps-5.1-arm-2015-07-17-13-29.zip this is the link that I used now nothing is working i get errors from all the google apps and also from setup wizard when i press the home button. How can i fix this problem? and if there is another gapps file can someone guide me to it, please?
Click to expand...
Click to collapse
On which version were you prior to updating to 12.1 snapshot? If you were on 11.0 snapshot you might want to consider a clean flash (factory reset, then flash ROM, then flash gapps). I did it like that and had no problems so far.
Good luck
Z0K4 said:
On which version were you prior to updating to 12.1 snapshot? If you were on 11.0 snapshot you might want to consider a clean flash (factory reset, then flash ROM, then flash gapps). I did it like that and had no problems so far.
Good luck
Click to expand...
Click to collapse
Can u help me with the gapps file I should use. When I flash the gapps that I used I keep getting setup wizard and other Google apps errors
tomt003.310 said:
Can u help me with the gapps file I should use. When I flash the gapps that I used I keep getting setup wizard and other Google apps errors
Click to expand...
Click to collapse
Try "open gapps" I always have good results using those. Maybe try a fresh install of Lollipop though with FULL wipes including system. If not at least wipe cache and dalvik after flashing.
tomt003.310 said:
Can u help me with the gapps file I should use. When I flash the gapps that I used I keep getting setup wizard and other Google apps errors
Click to expand...
Click to collapse
Since I have less than 10 posts I can't paste links, but gapps file that I used is the one suggested by CyanogenMod. Google "CyanogenMod gapps". Go to first link (it should be CM wiki page). Scroll down until you find table with version 12.1 "Download: GitHub". Click on it. Now, when on GitHub scroll down and click "arm". Now select the latest zip file (at the time of writing this, it's "gapps-5.1-arm-2015-07-17-13-29.zip"). If it doesn't start downloading click on "view the full file" or "View Raw".
If that doesn't work, try doing as RuffBuster said.
After I installed PA & gapps on my phone, and reboot it, it would crash.
Popup messages appears and the most common one is
"Unfortunately, Setup Wizard has stopped"
What can I do to install PA properly? Am I missing something? Please, help.
Also, when I don't install Gapps, no error would appear. Am I just installing the wrong gapps package?
Addtional info that might help:
ROM used: Paranoid Android 5.1 2015-08-22 STABLE
Recovery: TWRP 2.5.0.0
Gapps tried: tk_gapps_modular_nano_5.1.1_20150927, pa_n5120-5.1-20150822, open_gapps-arm-5.1-nano-20151028
Pretty sure PA builds are 5.1 not 5.1.1
Yes, but I already sought to install 5.1 gapps (pico and nano) but still to no avail.. I will still try to find other ways but please if you have any more inputs it would be much appreciated. Thanks
Wipe data.
Install ROM
Install gapps for Android version.
Boot.
Hello , i was using CM12 on GT-I9195 and an update poped up for CM13 which is using Android 6.0.1 (from 5.x.x) , then i upgraded i can't open Google Play Store anymore , what to do ?
Then i tried to it said something about Google Play Services , i unistalled it and tried to install it again but i made a hole in the water
Phoenix4th said:
Hello , i was using CM12 on GT-I9195 and an update poped up for CM13 which is using Android 6.0.1 (from 5.x.x) , then i upgraded i can't open Google Play Store anymore , what to do ?
Then i tried to it said something about Google Play Services , i unistalled it and tried to install it again but i made a hole in the water
Click to expand...
Click to collapse
Did you reflash Gapps when you upgraded? Was it the CM13 version?
You need to reflash Gapps FOR CM13 (ie you need a new version not the one for CM12) and it must be flashed directly after clashing CM13, I believe. (I've not upgraded to CM13 myself as yet). YOu should do a full wipe of data & cache too.
IronRoo said:
Did you reflash Gapps when you upgraded? Was it the CM13 version?
You need to reflash Gapps FOR CM13 (ie you need a new version not the one for CM12) and it must be flashed directly after clashing CM13, I believe. (I've not upgraded to CM13 myself as yet). YOu should do a full wipe of data & cache too.
Click to expand...
Click to collapse
Yeah i was on CM12 , a notification poped up to download and upgrade to CM13 which is Android v6 if im not mistaken
So i need to find the correct version of Gapps and flash it - how should i do that ? it's been years since i got CM on my phone and my memory is rusty
Just follow the instructions from here.
Phoenix4th said:
Yeah i was on CM12 , a notification poped up to download and upgrade to CM13 which is Android v6 if im not mistaken
So i need to find the correct version of Gapps and flash it - how should i do that ? it's been years since i got CM on my phone and my memory is rusty
Click to expand...
Click to collapse
And some info here also
http://www.cyanogenmod.org/blog/cm-13-0-release-1
Clear data & cache of Play store.
I decided to flash everything from the beginning , i flash CM13 it goes fine i try to glash Google Apps and i get "ERROR 10: Failed to set-up Open GApps' pre-bundled busybox binary , Please use TWRP as recovery instead
Phoenix4th said:
I decided to flash everything from the beginning , i flash CM13 it goes fine i try to glash Google Apps and i get "ERROR 10: Failed to set-up Open GApps' pre-bundled busybox binary , Please use TWRP as recovery instead
Click to expand...
Click to collapse
I have do a format /system, then I' ve flashed the Rom (Cm 13.0) and the Google Apps (Open-Arm Stock Package)
Inviato dal mio GT-I9195 utilizzando Tapatalk
How I solved this problem
I had the same problem and solved it by:
downloading open gapps for ARM and 6.0
booting into recovery
factory reset
sideload gapps by using my PC
Now everything works just fine