Hi guys
i flashed twrp and cloudy g3 2.5 and both was working fine until this afternoon i dont know what happened but my phone just rebooted and vibrates 4-5 times before entering bootloader and then enters twrp. i tried restoring my nandroid it faiLS. i successfully flashed a kdz in cse mode and then it started giving me lag and also the screen will turn off and wont come back on so i pulled the battery and flashed the same kdz in normal mode but now my g3 doesnt show up in the pc but it doesnt say unrecognisable device. just nothing happens but the phone still charges and shows mtp also the phone freezes and then turns off the display and it wont come on again. factory resetting doesnt work.
any ideas on how to get this phone right? please i need help asap
thanks in advance
Related
hello devs,
I just converted my f180l to e975, by following this tutorial: http://forum.xda-developers.com/showthread.php?t=2792877
but there is a problem, I couldn't make backup IMEI, so I flashed stock kitkat baseband of f180l, by freegee first flashed TWRP and its fine, running well. So it unlocked bootlock and showed 'Google' instead of 'LG'.
so after a while, when got its charge to down 15%, set just went off. I tried to switch on of it, but it didn't on. I tried 5 minutes later then it showed me the 'Google' logo and then just went off again. Then I went to fastboot mode, there is a list, it shows 'Baseband: N/A', try to in recovery mode, but it didn't go into it. I tried several times but same thing happened every time.
Now its in charge, but its notification lights like this: always on that red light, and blinking the green light over it.
BUT SCARY THING IS, I tried to go to download mode for flashing again .KDZ file, but it didn't go into download mode!!!
Please help me with it guys... please...
Thanks in advance.
bornodhaka said:
hello devs,
I just converted my f180l to e975, by following this tutorial: http://forum.xda-developers.com/showthread.php?t=2792877
but there is a problem, I couldn't make backup IMEI, so I flashed stock kitkat baseband of f180l, by freegee first flashed TWRP and its fine, running well. So it unlocked bootlock and showed 'Google' instead of 'LG'.
so after a while, when got its charge to down 15%, set just went off. I tried to switch on of it, but it didn't on. I tried 5 minutes later then it showed me the 'Google' logo and then just went off again. Then I went to fastboot mode, there is a list, it shows 'Baseband: N/A', try to in recovery mode, but it didn't go into it. I tried several times but same thing happened every time.
Now its in charge, but its notification lights like this: always on that red light, and blinking the green light over it.
BUT SCARY THING IS, I tried to go to download mode for flashing again .KDZ file, but it didn't go into download mode!!!
Please help me with it guys... please...
Thanks in advance.
Click to expand...
Click to collapse
Please follow this guide, Hope It'll be usefull for you.
http://forum.xda-developers.com/showthread.php?t=2230106
The phone is showing black screen after i flashed exitrecovery.zip file since i got stuck into a recovery bootloop and right after when i pressed reboot button in twrp phone died. Have i got the phone hard bricked?? :crying:
What i have tried so far is pressing various keys combination and nothing is happening, tried to get into download mode but right after putting the usb cable connected with pc into phone it gives a notification sound but doesn't shows anything on phone screen :crying:
I also tried to flash the stock rom with lg flash tool 2014 with kdz file but it reaches to a point in the beginning and it gives an error message that the "phone isnt connected pull out the cable and retry" and after pressing retry few times it gets stuck at 60%
Please help, is there a way to get out of this :crying:
When something similar happened to my Galaxy S4, I charged it to 100% first. Then I tried flashing the stock image back to it twice. The first time did not seem as if it completed. Second time was the charm. I know the phones are different but the symptoms are identical.
rigerp said:
The phone is showing black screen after i flashed exitrecovery.zip file since i got stuck into a recovery bootloop and right after when i pressed reboot button in twrp phone died. Have i got the phone hard bricked?? :crying:
What i have tried so far is pressing various keys combination and nothing is happening, tried to get into download mode but right after putting the usb cable connected with pc into phone it gives a notification sound but doesn't shows anything on phone screen :crying:
I also tried to flash the stock rom with lg flash tool 2014 with kdz file but it reaches to a point in the beginning and it gives an error message that the "phone isnt connected pull out the cable and retry" and after pressing retry few times it gets stuck at 60%
Please help, is there a way to get out of this :crying:
Click to expand...
Click to collapse
jmacguire said:
When something similar happened to my Galaxy S4, I charged it to 100% first. Then I tried flashing the stock image back to it twice. The first time did not seem as if it completed. Second time was the charm. I know the phones are different but the symptoms are identical.
Click to expand...
Click to collapse
ok let me try it out, please stay in touch?
Hi, I have an LG G3 VS985 on 47a (according to LGUP) and I recently tried installing an OTA update that I have been putting off for a while. During the update I got an error that froze the updating process so I pulled the battery. After pulling the battery I can not get passed the LG logo in the beginning. The logo will show up, turn black for a few seconds, vibrate, then restart again. I tried downgrading using the TOT and KDZ methods but kept getting a no ks version error or some other type of problem. So then I decided to use the newest 48a KDZ file and LGUP to update/overwrite what I have installed right now. The process starts and the phone shows that the installation is working but when LGUP gets to the point where it has to restart the phone (about 80%), it just keeps bootlooping instead of going on with the installation. I tried clearing cache, factory resetting, and everything else I can think of. I read that the bootloader might be corrupted? If that is the case, how would I go about fixing it? Thanks in advance.
Edit: Another strange thing happens when I plug my phone into a charger from the off state. Instead of showing how much battery is charged, it just shows a loading circle on the battery picture then proceeds to restart into the loop (without me touching the power).
Exact same problem I'm having
1 difference my led light does not work . Is there a fix? Need help
Hello
I am new to working on these phones so I apologize in advance if I don't properly state any processes or terms correctly.
I have a stock non modded Verizon LGG3 VS985 that experienced problems with WiFi and Bluetooth not working and significant battery drain. This happened right after a recent update to marshmallow. I tried cache clearing, safe mode, hard reset and nothing solved the problem. I decided I wanted to take the phone back to factory condition. I started with the LG flash tool that uses the .tot and a .dll. I ran the flash and when the program got to approx. 80%(at checking mini os phase of the flash) the phone began to reboot and only got as far as the LG logo and after about 2 min of the phone trying to reboot the flash program said fail, usb connect or something like that. At this point the phone will only start and go into a loop that includes the vibrate and the LG logo. and that will cycle until I believe the battery would die if allowed. I then found a link here at XDA (https://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140) that uses the KDZ method, was well written and easy to follow. I ran it on the phone and it was going great. The flash program got to 88% and the phone went into the boot loop with the vib and LG logo . The flash program continued to run until it was complete while the phone was in the boot loop and it got to 100% and said that the software installed. I powered down the phone via battery removal and now when it tries to boot it vibes, shows the lg log and then the green android symbol shows for about 2 seconds and then it does it all over again. I have tried a hard reset and nothing changes. I appreciate any ideas any of you may have on what I can try to get this resolved. Thank you.
shovelheader said:
Hello
I am new to working on these phones so I apologize in advance if I don't properly state any processes or terms correctly.
I have a stock non modded Verizon LGG3 VS985 that experienced problems with WiFi and Bluetooth not working and significant battery drain. This happened right after a recent update to marshmallow. I tried cache clearing, safe mode, hard reset and nothing solved the problem. I decided I wanted to take the phone back to factory condition. I started with the LG flash tool that uses the .tot and a .dll. I ran the flash and when the program got to approx. 80%(at checking mini os phase of the flash) the phone began to reboot and only got as far as the LG logo and after about 2 min of the phone trying to reboot the flash program said fail, usb connect or something like that. At this point the phone will only start and go into a loop that includes the vibrate and the LG logo. and that will cycle until I believe the battery would die if allowed. I then found a link here at XDA (https://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140) that uses the KDZ method, was well written and easy to follow. I ran it on the phone and it was going great. The flash program got to 88% and the phone went into the boot loop with the vib and LG logo . The flash program continued to run until it was complete while the phone was in the boot loop and it got to 100% and said that the software installed. I powered down the phone via battery removal and now when it tries to boot it vibes, shows the lg log and then the green android symbol shows for about 2 seconds and then it does it all over again. I have tried a hard reset and nothing changes. I appreciate any ideas any of you may have on what I can try to get this resolved. Thank you.
Click to expand...
Click to collapse
U try to go back to stock by shutting the phone down then hold the volume up button then plug in the phone to get into download mode
Sent from my LG-VS985 using Tapatalk
djevil said:
U try to go back to stock by shutting the phone down then hold the volume up button then plug in the phone to get into download mode
Sent from my LG-VS985 using Tapatalk
Click to expand...
Click to collapse
Not sure I understand the question completely, but I did place the phone in download mode as per the method you mention prior to both attempting the KDZ method and the TOT method of going back to stock.
Well my G4 (VS986) has been running ok on 13b rooted since december 2015, and today it suddenly died, it was on my desk and when I tried to use it the screen was black and it won't turn on, something like this had happen before but I usually just remove the battery and voila it had it working again. But not this time.
Now It only goes to the LG screen and then it turns off again (but it doesn't bootloop) so I keep trying then I connected the phone to the charger and it tried to boot again and this time it went to a black screen saying Secure Booting Error and it was error code 1007 but it went off again.
Then I tried to access recovery mode and it can access and be there for 40 min and it wont turn off, however I can't put it on download mode alway when is connected to the PC it says "qhsusb_bulk"
Anyone have any idea on what happen and how to fix it.
Thanks.
Nevermind.. Say hello to a new bootlooping LG G4 !!
I put it on the freezer and after 20 minutes the phone boot up normal, but after a few minutes it went the famous boot loop.
Time for a new phone