CyanogenMod 12.1 (Unofficial)
STATUS: Abandoned.
Features:
Odexed, quicker first boot
March security update
Archived Downloads
Sources
Well.Another CM 12.1 rom
---------- Post added at 12:22 PM ---------- Previous post was at 12:15 PM ----------
Wait.GPS is fixed?
ChristopherXI said:
Well.Another CM 12.1 rom
---------- Post added at 12:22 PM ---------- Previous post was at 12:15 PM ----------
Wait.GPS is fixed?
Click to expand...
Click to collapse
GPS is yet a bug of any non-stock-based ROM.
Finally the test build i was waiting for
Cant try tho ZF5 Is daily driver need it always.
Hope the boot.img can be signed.... i don't need to unlocking bootloader to install this rom.
arraiyan123 said:
Hope the boot.img can be signed.... i don't need to unlocking bootloader to install this rom.
Click to expand...
Click to collapse
Well I think it's not possible.Only Asus could do that. They really need to learn lesson from Sony. Build 2 seperate roms. One is their ZenUI, the other one could be AOSP. But they are not smart enough to think that their rom is full of BLOATWARE ****
This CM is going to be pure? Most of the custom ROM comes with ASUS Apps and sempe has removed these Apps
ChristopherXI said:
Well I think it's not possible.Only Asus could do that. They really need to learn lesson from Sony. Build 2 seperate roms. One is their ZenUI, the other one could be AOSP. But they are not smart enough to think that their rom is full of BLOATWARE ****
Click to expand...
Click to collapse
True that.
Kyo. said:
This CM is going to be pure? Most of the custom ROM comes with ASUS Apps and sempe has removed these Apps
Click to expand...
Click to collapse
Yes, it will be pure and will only include few Intel apps for thermal/fw management. All the rest will be from CM. Im also removing CMUpdater because there is no reason to keep it.
@dgadelha
Is this kernel compatible with your CZ cuz I would like the under clocked kernel.
rkj911 said:
@dgadelha
Is this kernel compatible with your CZ cuz I would like the under clocked kernel.
Click to expand...
Click to collapse
It should be, althought I haven't tested it on CyanoZenMod.
You can try it.
P.S.: don't forget, after flashing,
Code:
fastboot erase cache
rkj911 said:
@dgadelha
Is this kernel compatible with your CZ cuz I would like the under clocked kernel.
Click to expand...
Click to collapse
Look at the 'Features' part of the post
ChristopherXI said:
Look at the 'Features' part of the post
Click to expand...
Click to collapse
Am asking for a different ROM which he made with stock kernel so am asking to use this kernel, I know its under clocked i have read the thread.
New Nightly Release - 20160305
Updated Known Issues:
Random screen locking - FIXED 20160305
Delay on video decoding - FIXED 20160305
Random screen wake-ups - FIXED 20160305
No Vibration - No ETA
Dead MPEG Video Decoder - As of 20160305 (PLANNED)
No Baseband (RIL, Telephony) - As of 20160305 (TO BE FIXED)
Progress on gpsd, but not working yet (devs: the socket is now created, but the IPC connection fails. I think it's because of SELinux) - No ETA - As of 20160305
Downloads
dgadelha said:
New Nightly Release - 20160305
Updated Known Issues:
Random screen locking - FIXED 20160305
Delay on video decoding - FIXED 20160305
Random screen wake-ups - FIXED 20160305
No Vibration - No ETA
Dead MPEG Video Decoder - As of 20160305 (PLANNED)
No Baseband (RIL, Telephony) - As of 20160305 (TO BE FIXED)
Progress on gpsd, but not working yet (devs: the socket is now created, but the IPC connection fails. I think it's because of SELinux) - No ETA - As of 20160305
UPLOAD IN PROGRESS
Click to expand...
Click to collapse
nice , i downloading sources
ChristopherXI said:
Well I think it's not possible.Only Asus could do that. They really need to learn lesson from Sony. Build 2 seperate roms. One is their ZenUI, the other one could be AOSP. But they are not smart enough to think that their rom is full of BLOATWARE ****
Click to expand...
Click to collapse
Asus should give stable firmwares updated and with all possible features, also must provide the sources of it(only if based on open source), if you dont want their software then you should find how to use something else or make your own, and THIS WAS THE ONLY OBJECTIVE ON XDA back in the day.
Also your comment about sony isnt totally true, as you make it sound great but dont tell about the fact that they support no more than 3 or 4 devices and usually stop supporting devices without even talking about it first. I know well about this because i had 2 xpedia devices and dealt with this issue before.
Now, focus on whats important, this offtopic subject only bloat the thread and make noobs think its true because they dont have experience about it.
And now i hope this answer i gave ends this useless subject.
Enviado de meu ASUS_T00J usando Tapatalk
guidoido004 said:
Asus should give stable firmwares updated and with all possible features, also must provide the sources of it(only if based on open source), if you dont want their software then you should find how to use something else or make your own, and THIS WAS THE ONLY OBJECTIVE ON XDA back in the day.
Also your comment about sony isnt totally true, as you make it sound great but dont tell about the fact that they support no more than 3 or 4 devices and usually stop supporting devices without even talking about it first. I know well about this because i had 2 xpedia devices and dealt with this issue before.
Now, focus on whats important, this offtopic subject only bloat the thread and make noobs think its true because they dont have experience about it.
And now i hope this answer i gave ends this useless subject.
Enviado de meu ASUS_T00J usando Tapatalk
Click to expand...
Click to collapse
I know about this. And I don't make the reply sound great. Is the truth. Since the lollipop update. The zenfone 5 is buggy as fu**
The system does not see the SIM card
Esk1mOo said:
The system does not see the SIM card
Click to expand...
Click to collapse
I will try to fix it in next release
What is gpsd? GPS?
ChristopherXI said:
What is gpsd? GPS?
Click to expand...
Click to collapse
i think yes
Related
FEEL FREE TO DONATE US FOR ALL WE'RE DOING FOR YOU!
For general discussions, bug reports and FAQ, write HERE!
Credits:
Jellaxy Team (in particular erikcas for CM10 / JB sources)
MoltenMotherBoard team!
Downloads:
MoltenMotherBoard mirror | Code.Google
Full sources:
MoltenMotherBoard sources: MoltenMotherBoard | Github
Changelog:
RC-20130913
Fixed initial Google configuration issue, due to wrong SDK SetupWizard app's version
Updated kernel headers
Launcher rotation allowed
Increased Frame Rate on Camera
Massive updated cameraHAL
New bootsplash logo
Gapps updated to 20130705
Increased SMS characters limit
Massive clean on device trees
Updated recovery-related stuff
QVGA improvements
RIL improvements
Dalvik improvements
ADB notification disabled
Included useful / power-saving strings in system.prop
Hostpot / Tethering fixed (need testers!)
Switched to a thinner build (located in tiny.mk build config)
Code updates by CyanogenMod, AOSP
TB-20130630
Included MMB vendor
Included Gapps by default
Updated Samsung vendors
Improved liblights (no more prebuilt, included in device tree)
First release
Issues:
Tethering / Hotspot
Panorama mode (black preview)
Do you want to report an issue? Do it here!
In order to do it, create a new issue, choosing correct labels corrisponding to: Device/OS which you're using, ROM/project you're on, kind of issue.
Also, please, be sure you're running the ROM/project in the exact way we've provided it to you (do not create issues if you're using different
kernel, mod, plugins and dependencies we didn't tell to use).
General Questions: MoltenMotherBoard Projects | General Questions and Info
Official Mantainer(s): Mackief, ItachiSama, p4c0
screenshots? downloadlink? do not make a thread before you have anyting to show
Camera??
Tapatalk2 send mobile
http://phiexz.com
I'm still working on it...
Shared first stable release ;-)
mackief said:
Shared first stable release ;-)
Click to expand...
Click to collapse
Downloading and will be testing soon
iok1 said:
Downloading and will be testing soon
Click to expand...
Click to collapse
The rom does not seem to be booting
How I installed:
Format all partitions and factory reset.
Install zip
Factory reset
I am stuck at the boot animation.
Possible reasons:
Bad download?
Untested rom?
Sent from my HTC Sensation
Hehehe This looks interesting!
iok1 said:
The rom does not seem to be booting
How I installed:
Format all partitions and factory reset.
Install zip
Factory reset
I am stuck at the boot animation.
Possible reasons:
Bad download?
Untested rom?
Sent from my HTC Sensation
Click to expand...
Click to collapse
Nope, the problem is about Settings app.
I fixed that now.
I'm adding something else and then i'll share the release.
mackief said:
Nope, the problem is about Settings app.
I fixed that now.
I'm adding something else and then i'll share the release.
Click to expand...
Click to collapse
Downloading 0.6 and will be testing soon
some pic
angel_boulevard said:
some pic
Click to expand...
Click to collapse
I would but screenshot doesn't work.
iok1 said:
Downloading 0.6 and will be testing soon
Click to expand...
Click to collapse
Let me know a little review for this release!
angel_boulevard said:
some pic
Click to expand...
Click to collapse
At the moment, screenshots are useless, 'cause i want to make a lot of changes about the graphic of D-Droid!
At first i work for the functionality of the rom, then i'll edit the graphic!
mackief said:
Let me know a little review for this release!
Click to expand...
Click to collapse
I guess it was based on miui right? Battery life was all-right, everything working, very lightweight rom, I see potential
iok1 said:
I guess it was based on miui right? Battery life was all-right, everything working, very lightweight rom, I see potential
Click to expand...
Click to collapse
I hoped that.
However, there's still so much work to do.
I've seen two big bugs: cant sign to Market, cant receive Calls!
I'll fix it soon.
iok1 said:
Downloading 0.6 and will be testing soon
Click to expand...
Click to collapse
Thanks men, you help us alot with testing the releases!
---------- Post added at 01:14 PM ---------- Previous post was at 01:10 PM ----------
Aw, guys, don't forget to email us for any info/questions/anything!
Email: [email protected]
Finally fixed incoming calls!
MAYBE tomorrow we'll make another release...gotta fix some important bugs like the Market :/
If not tomorrow, in the next days, as we have more free time
Sent from my GT-S5660 using XDA
Working/Not Working
Working
Boot
GSM (phone/messages/GPRS/3G/EDGE)
Market
Wi-fi interface
Bluetooth
HW Acceleration
Sound
Sensors
Apps Sync
Buttons Backlight
BLN Support
Emails
Keyboard
Deep Sleep
HW Video Acceleration
FM Radio
Camera
Headset
Music (Except for some small bugs)
Browser (Removed from ROM, check out the Aptoide Repository)
'Settings' options
USB Debug / Native Android Mass Storage
Click to expand...
Click to collapse
Not Working
Still some Application Bugs
[*]If you find any bugs, please contact us
Click to expand...
Click to collapse
screenshots would be nice
Introduction
This is a test version of OmniROM with SGX DDK 1.9 graphics drivers, as well as many OMAP-related kernel updates. No, this isn't 3.4, but a LOT of TI updates were packed into the kernel. Currently, this is only for maguro, but anyone can build it for toro/toroplus with the sources.
Click to expand...
Click to collapse
Features
The ROM and the kernel has a stock feeling - no mods were added.
Most notable new features:
- SGX DDK [email protected]
- GPU governor
- Enabled 384 MHz GPU frequency (as a part of the OMAP updates)
- Tons of background changes for the kernel
Click to expand...
Click to collapse
Important notes
Camera and OMX is not working yet! This turned out to be a harder task for me to fix than implementing the new GPU drivers...
Other bugs are not known yet, but there may be some! Bug reports are welcome.
Thanks to everyone who helped me, especially Hashcode, as I used his repos as an example on how to set up things properly.
Click to expand...
Click to collapse
FAQ
How can I install this?
Just flash the ROM zip (and optionally GAPPS), and you're done.
Can I install this on top of Omni roms?
Yes, you should be able to do so without data loss.
Can I revert to non-1.9 Omni after this without data loss?
Yes.
Is this faster than the current ROMs/kernels?
As this is a stock-like ROM and kernel, not necessarily - there are no optimizations, etc added.
However, if one adds the optimizations used on current custom roms and kernels, this should be faster than them.
Can I install another kernel?
No, the new drivers require the ROM and the kernel side to match each other. Only this combination will work.
When will you fix camera?
I'm trying, but I don't have much success...
Can I help?
Sure, I appreciate any help, as I'm running out of ideas on how to fix camera and OMX.
Can I build this stuff myself?
Of course - everything needed is on my github. You'll need the following repos added to your Omni sources:
omni_android_device_samsung_tuna
omap (newpvr2 branch)
proprietary_vendor_samsung_tuna
Click to expand...
Click to collapse
XDA:DevDB Information
OmniROM DDK 1.9 Test, ROM for the Samsung Galaxy Nexus
Contributors
Ziyan
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Based On: OmniROM
Version Information
Status: Testing
Created 2014-07-13
Last Updated 2014-07-13
Where is the download link?!
Sent from my Galaxy Nexus using Tapatalk
aliesz said:
Where is the download link?!
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Click on the downloads button above the thread title
If you're on tapatalk you'll need to go to Web view..
To see the download
Sent from the "DOG" pound
Yes I found it just seconds ago
Sent from my Galaxy Nexus using Tapatalk
Also OP there 3 types of gnexes...
You might want to add to the OP which one it is for
Sent from the "DOG" pound
cujo6801 said:
Also OP there 3 types of gnexes...
You might want to add to the OP which one it is for
Sent from the "DOG" pound
Click to expand...
Click to collapse
Thanks for the suggestion, added it to the introduction text.
Amazing! I will try out tommorow
I've installed it and it feels smooth, I've not encountered any bugs yet. Have you tried removing "kitkat workarounds" from frameworks/native?
Thanks for your awesome work
Nice work! Seems a lot more responsive although it may be placebo effect.
Thanks for posting this, I'm going to try building for toroplus, since we seem to get left out of the excitement so often. My internet connection is slow and so is my computer, so you will probably have everything fixed before I get a chance to even look for bugs.
Great work! I hope you manage to get camera working soon.
Amazing work bro, wishing u best of luck !!
I'm on F2Fs otherwise would have tested this asap...
Awesome work!
Thanks for the amazing work you've brought to the gnex, but since i'm on F2FS i was wondering if you could make a F2FS compatible version of this rom?
matoushybl said:
I've installed it and it feels smooth, I've not encountered any bugs yet. Have you tried removing "kitkat workarounds" from frameworks/native?
Thanks for your awesome work
Click to expand...
Click to collapse
Yeah, but the glitches are still there. Actually, that may be a bug in android itself (it affects a lot of devices), they may have fixed it on L... and those workarounds are really not important, as the problem only comes when taking screenshots. And since android takes screenshots for the rotation animation, etc, those glitches appear there as well. The workarounds just force it to take screenshots on CPU-path, they don't change anything else.
I think they fixed it in DDK 1.12 (which is the next version after 1.9), but that's another story, as I think it does not support our GPU (but it may in the future).
apollo07 said:
Thanks for the amazing work you've brought to the gnex, but since i'm on F2FS i was wondering if you could make a F2FS compatible version of this rom?
Click to expand...
Click to collapse
Not yet, I'm focusing on camera for now
Ziyan said:
The workarounds just force it to take screenshots on CPU-path, they don't change anything else.
Click to expand...
Click to collapse
How about using SurfaceFlinger's Sync framwork now?
https://github.com/omnirom/android_...mmit/d677ae87b2466b03a6ca1cda6ee532c6ba407f8c
@Ziyan https://gerrit.omnirom.org/#/c/8141/
https://gerrit.omnirom.org/#/c/8156/ cherypick those and recompile
Ziyan said:
Yeah, but the glitches are still there. Actually, that may be a bug in android itself (it affects a lot of devices), they may have fixed it on L... and those workarounds are really not important, as the problem only comes when taking screenshots. And since android takes screenshots for the rotation animation, etc, those glitches appear there as well. The workarounds just force it to take screenshots on CPU-path, they don't change anything else.
I think they fixed it in DDK 1.12 (which is the next version after 1.9), but that's another story, as I think it does not support our GPU (but it may in the future).
Not yet, I'm focusing on camera for now
Click to expand...
Click to collapse
Ziyan, thanks for the awesome work
It 's possible to have some screenshots?
Hi Everyone,
I've built Cyanogenmod with CM made patches to include the latest kernel from Oppo's Project Spectrum, thereby supporting the new Find 7 LCD panels. Please make backups and let your fellow Android flashaholics know your results.
This build is for LVM storage only.
Known issues:
The standard CM updater will likely break this modified rom. Please only update by flashing builds from this thread.
Sources:
Cyanogenmod Github
Patch #1
Patch #2
Wuxianlin's LVM device tree
Download:
cm-13.0-20160303-UNOFFICIAL-find7s.zip - Current
cm-13.0-20160301-UNOFFICIAL-find7.zip
THIS IS AN EXPERIMENTAL AND POTENTIALLY UNSTABLE BUILD - ALWAYS BACKUP.
I'll keep uploading builds if there's enough interest. Please post feedback below.
So you have tested them or not?
maxwen said:
So you have tested them or not?
Click to expand...
Click to collapse
My results were that Cyanogenmod booted fine, but I'm on LVM so couldn't test properly. I haven't tested Nameless out yet but will next chance I get.
Slightly unrelated - Thank you for getting OmniRom on a kernel with the new LCD support so early, you've saved my Find7 for these past few months!
Pojiku said:
My results were that Cyanogenmod booted fine, but I'm on LVM so couldn't test properly. I haven't tested Nameless out yet but will next chance I get.
Slightly unrelated - Thank you for getting OmniRom on a kernel with the new LCD support so early, you've saved my Find7 for these past few months!
Click to expand...
Click to collapse
Hi, install and boot works fine, display works fine, but not LVM supported
Anyway thanks for your work, i will wait for new build with lvm support.
Thanks :good:
Since Nameless had a few issues I don't have the time to fix, I've decided to focus on Cyanogenmod builds.
The latest CM build (2015-03-03) fixes screen gestures and switches to LVM storage.
Could you build for x9007/6?
Отправлено с моего Find7 через Tapatalk
Pojiku said:
Since Nameless had a few issues I don't have the time to fix, I've decided to focus on Cyanogenmod builds.
The latest CM build (2015-03-03) fixes screen gestures and switches to LVM storage.
Click to expand...
Click to collapse
Yeah it works! I have found only a serious bug: i have no sounds of any kind: no music, notifications, etc.
Everything else works or seems to works fine: 4g, wifi, calls, everything.
Thanks so much for the rom, long time waiting for this.
Pojiku said:
Slightly unrelated - Thank you for getting OmniRom on a kernel with the new LCD support so early, you've saved my Find7 for these past few months!
Click to expand...
Click to collapse
You are welcome - if you have any more questions just contact me
I've flashed this rom and from my experience, the only real bug that is here is the fact that sound does not work at all unless using headphones. Could you by any chance port MaxxAudio from the original ColorOS onto this or the Camera?
Pojiku said:
...I'll keep uploading builds if there's enough interest. Please post feedback below.
Click to expand...
Click to collapse
Hi Pojiku.
Good job man. Don't wait if there wiil be interest to upload builds. Go my friend because i'm sure many find 7's owners are waiting for this impatiently in particular those who own a find 7 with new lcd panel like me. I m on omni, it s a very good rom with a very good dev. Today due to an incompatibility, i m forced to stay on an old omni build and cannot update. So i think that your rom could be a solution for me. I will wait a new build fixing the sound issue and be sure i will flash your rom to test it.
Thank you for your invest and your time.
Good luck.
---------- Post added at 05:54 AM ---------- Previous post was at 05:47 AM ----------
Thank you for getting OmniRom on a kernel with the new LCD support so early, you've saved my Find7 for these past few months!
Click to expand...
Click to collapse
that goes for me too. Without maxwen I'll still be on color os or spectrum both of which are bugged.
Thanks Max
Hi Pojiku
I ve tried the lastest build and i m vey exciting. Please continue your work and release a new build to fix the sound issue.
Can't wait lol.
Due to lack of Clear Kernel Source, this thread is in violation of GPL License as well as XDA Rules. Hence it is closed.
OP Check your PM and respond in order to get it reopened.
Linux 3.10-based kernel for Oneplus One (bacon)
Info:
use this kernel at your own risk. Flashing it the wrong way might brick your device. I'm not responsible for any software/hardware damage.
This kernel is based on top of erorcun's 3.10 kernel. erorcun has spent an enormous time working on this project and he deserves a huge "Thank you" for having succeeded in one of the most difficult tasks in Android development: upgrading a device to a newer Linux release.
Features:
v3 (12th December)
built with O3 optimizations
CAF CPU boosting driver (replaces cpu_input_boost - might be a temporary switch)
kernel code base updated to Linux 3.10.60
sdcardfs updates
minor miscellaneous improvements
old releases:
v2.1
minor stability fix
v2 (12th November)
kernel code base updates reverted, then re-applied only up to 3.10.54
compiled with an improved set of GCC flags
tuned AIO for SSD-only machines
v1 (30th October)
built with GCC 5, UBER Toolchain and the optimal compiler flags for Krait CPUs
kernel code base upgraded to Linux 3.10.88
power-efficient workqueues
sound control by francisconfranco
CPU voltage control
cpu_input_boost by Sultanxda
sdcardfs & f2fs support
support for both LineageOS's and Sultan's camera HALs
Compatibility
The kernel is compatible with all the Marshmallow/Nougat ROMs that use either LineageOS's camera HAL or Sultan's (a.k.a. CAF's). Just make sure you download the right version
Currently, the kernel has been tested only on LineageOS 14.1, but I'm sure the CAF build is safe to flash and works properly as well.
The kernel doesn't work on Oreo (yet)!
Download
The kernel can be download from AFH: 3.10 kernel on AndroidFileHost
Thanks to:
erorcun, franciscofranco, Sultanxda, CAF & UBER, Mecca EL.
XDA:DevDB Information
Tom's Linux 3.10 kernel, Kernel for the OnePlus One
Contributors
Tomoms, erorcun
Source Code: https://github.com/Tomoms/neon_kernel_bacon
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 3.0
Stable Release Date: 2017-12-12
Created 2017-10-30
Last Updated 2017-12-12
thanks man! any plans on oreo version?
criminality said:
thanks man! any plans on oreo version?
Click to expand...
Click to collapse
Everything will come in due time
It's one of the things I'll work on soon. Be patient, and you'll eventually get what you want
Thank you for this.
Don't know if it's your Lineage rom or this kernel, but video that i record is really stuttery. Like very janky.
I recorded the video with the build-in snap camera.
Fatsodonkey said:
Thank you for this.
Don't know if it's your Lineage rom or this kernel, but video that i record is really stuttery. Like very janky.
I recorded the video with the build-in snap camera.
Click to expand...
Click to collapse
Could you tell me the exact resolution you used?
Tomoms said:
Could you tell me the exact resolution you used?
Click to expand...
Click to collapse
Happens with all resolutions. I already tested Sultans Lineage as well with this kernel and the same thing happens. Don't know if it tries to record it too fast as it seems to be too quick and stutters a lot.
The Los kernel seems to work fine with video recording altough i just dirty flashed it on top of Boefflas kernel.
E:It definetly is the kernel that is causing the stutter.
Fatsodonkey said:
Happens with all resolutions. I already tested Sultans Lineage as well with this kernel and the same thing happens. Don't know if it tries to record it too fast as it seems to be too quick and stutters a lot.
The Los kernel seems to work fine with video recording altough i just dirty flashed it on top of Boefflas kernel.
E:It definetly is the kernel that is causing the stutter.
Click to expand...
Click to collapse
I'll compare the camera driver present in this kernel and the one in Sultan's kernel, then try to fix this. Unfortunately at the moment this is the best thing we can achieve, CAF camera support had always got some small problems even in erorcun's build if I recall correctly, and these problems are inevitably "inherited" by my kernel.
Thank you for working on this, I was looking forward to release since I saw your announcement in erorcun's thread.
Firstly i tried to dirty flash kernel on top of LineageOS build (N) by idprophecy, since i got positive experience changing kernels (3.4 ones) this way even with encrypted phone. So when i tried to boot up with new kernel, unfortunately it did not work and phone says my password is correct but encryption partition is broken and i need to hard reset.
I went to clean install, removed encryption and flash same LinOS build + your kernel. Then i encrypted phone again and everything went fine. However now my TWRP refuses password for decrypting partitions (its was like that in early N development for bacon on many roms).
Overall perfomance is not really smooth comparing with 3.4 kernels, but i didnt bothered to play with kernel setting.
Also i cant get MTP working, phone only charging via usb and PC (Windows) cannot see its memory.
I know this report is probably useless without kmsg logs, but i didnt have time to pull them off, so sorry about that. I try do it later
TbMa said:
Thank you for working on this, I was looking forward to release since I saw your announcement in erorcun's thread.
Firstly i tried to dirty flash kernel on top of LineageOS build (N) by idprophecy, since i got positive experience changing kernels (3.4 ones) this way even with encrypted phone. So when i tried to boot up with new kernel, unfortunately it did not work and phone says my password is correct but encryption partition is broken and i need to hard reset.
I went to clean install, removed encryption and flash same LinOS build + your kernel. Then i encrypted phone again and everything went fine. However now my TWRP refuses password for decrypting partitions (its was like that in early N development for bacon on many roms).
Overall perfomance is not really smooth comparing with 3.4 kernels, but i didnt bothered to play with kernel setting.
Also i cant get MTP working, phone only charging via usb and PC (Windows) cannot see its memory.
I know this report is probably useless without kmsg logs, but i didnt have time to pull them off, so sorry about that. I try do it later
Click to expand...
Click to collapse
Definitely would need a log, to see what the issue is, with your experiences.
I've been alpha and beta testing this kernel, and I'm not experiencing any of the problems you and other users are describing. Clean install @idprophecy LOS14.1, flash this kernel, reboot back to recovery and flash MagiskSU, enjoy an ultra responsive OPO.
TbMa said:
Thank you for working on this, I was looking forward to release since I saw your announcement in erorcun's thread.
Firstly i tried to dirty flash kernel on top of LineageOS build (N) by idprophecy, since i got positive experience changing kernels (3.4 ones) this way even with encrypted phone. So when i tried to boot up with new kernel, unfortunately it did not work and phone says my password is correct but encryption partition is broken and i need to hard reset.
I went to clean install, removed encryption and flash same LinOS build + your kernel. Then i encrypted phone again and everything went fine. However now my TWRP refuses password for decrypting partitions (its was like that in early N development for bacon on many roms).
Overall perfomance is not really smooth comparing with 3.4 kernels, but i didnt bothered to play with kernel setting.
Also i cant get MTP working, phone only charging via usb and PC (Windows) cannot see its memory.
I know this report is probably useless without kmsg logs, but i didnt have time to pull them off, so sorry about that. I try do it later
Click to expand...
Click to collapse
I faced the same MTP problem when I started developing this kernel several months ago. But I'm sure it appeared at a later stage of development. So MTP shouldn't be an issue as of now. Also, according to @Mecca EL, there should be a substantial performance improvement.
Mecca EL said:
Definitely would need a log, to see what the issue is, with your experiences.
I've been alpha and beta testing this kernel, and I'm not experiencing any of the problems you and other users are describing. Clean install @idprophecy LOS14.1, flash this kernel, reboot back to recovery and flash MagiskSU, enjoy an ultra responsive OPO.
Click to expand...
Click to collapse
So can you confirm MTP is working on this kernel? What about video recording? Is it lagging or not? I still haven't had enough time to thoroughly try my own kernel :/
Thank you.
Mecca EL said:
Definitely would need a log, to see what the issue is, with your experiences.
I've been alpha and beta testing this kernel, and I'm not experiencing any of the problems you and other users are describing. Clean install @idprophecy LOS14.1, flash this kernel, reboot back to recovery and flash MagiskSU, enjoy an ultra responsive OPO.
Click to expand...
Click to collapse
What about encryption? Are your TWRP able to decrypt data with this kernel?
Tomoms said:
I faced the same MTP problem when I started developing this kernel several months ago. But I'm sure it appeared at a later stage of development. So MTP shouldn't be an issue as of now. Also, according to @Mecca EL, there should be a substantial performance improvement.
So can you confirm MTP is working on this kernel? What about video recording? Is it lagging or not? I still haven't had enough time to thoroughly try my own kernel :/
Thank you.
Click to expand...
Click to collapse
I'll double check, and do a complete run down on this latest one, in case it differs from the last one you sent me.
---------- Post added at 08:56 AM ---------- Previous post was at 08:53 AM ----------
TbMa said:
What about encryption? Are your TWRP able to decrypt data with this kernel?
Click to expand...
Click to collapse
I've not set encryption. I've seen way too many problems with that across almost all android devices. I'll see if it's not too much trouble to set and test for you, if I'm able to revert to unencrypted easily.
Mecca EL said:
I'll double check, and do a complete run down on this latest one, in case it differs from the last one you sent me.
---------- Post added at 08:56 AM ---------- Previous post was at 08:53 AM ----------
I've not set encryption. I've seen way too many problems with that across almost all android devices. I'll see if it's not too much trouble to set and test for you, if I'm able to revert to unencrypted easily.
Click to expand...
Click to collapse
Well i am using encryption since early MM and not a single problem if developer of rom and kernel did his work fine. Biggest payoff its hit battery.
Unfortunately you cant revert encryption without formating whole internal storage, so its a little bit complicated with backups and etc
MTP is not working for me either, I'm using the CAF kernel on LineageOS by Sultan.
SirSoviet said:
MTP is not working for me either, I'm using the CAF kernel on LineageOS by Sultan.
Click to expand...
Click to collapse
Thanks for your feedback, I'll do my best to fix this issue as soon as possible. Do you face the video recording issue?
Tomoms said:
Thanks for your feedback, I'll do my best to fix this issue as soon as possible. Do you face the video recording issue?
Click to expand...
Click to collapse
I never record videos, so I don't know. I'll check later today.
@Tomoms ,just a heads up: kernel works fine with Marshmallow(los13).
Mr.Ak said:
@Tomoms ,just a heads up: kernel works fine with Marshmallow(los13).
Click to expand...
Click to collapse
Thank you for letting me know. I'll immediately update the thread.
SirSoviet said:
I never record videos, so I don't know. I'll check later today.
Click to expand...
Click to collapse
Nothing wrong with video recording here.
SirSoviet said:
Nothing wrong with video recording here.
Click to expand...
Click to collapse
Hmm... I'll try it myself soon. In the meantime, my main concern will be fixing MTP, and it won't take me too much, fortunately.
I have some previous experience building rom from the WIko Wax and the Huawei P8.
I run the Xiaomi A2 Lite as my daily driver, so I can't afford to test this ROM.
I do not know if this will even boot. As I said, I need you members of this forum to test this and tell me what works and the ROM's performance.
This ROM is based on LineageOS 17.1, so that is Android 10.
With a bit of luck this should work out of the box. It is here, that I should thank the pople from the Team Potato here https://forum.xda-developers.com/mi-a2-lite/development/10-0-posp-v3-q-daisy-t4011191 They are the ones who made most of the work to bring Android 10 to this device. I have just modified it a bit. Once again, props to them.
And here are the links to the different versions:
Version 0.1
No device audio
No camera
Link V0.1
Version 0.2
LED not working when charging
Fixed Camera
Fixed Audio
Link V0.2
Version 0.2.1
Fixed LED
Link V0.2.1
Version 0.3
More breaking than fixing
Wireless display fixed
Link V0.3
Version 0.5
Everything should be fixed now
OTA crashes whe nhitting install
Link V0.5
Version 0.6
Uses right microphone for camcorder
Link V0.6
Version 0.7
Fixed wireless display
Fix decoder.avc errors
Build tinymix
Build libldacBT_dec
Link V0.7
Version 0.8
Everything should work
Stable flashlight behaviour
Fixed green camera tint in low light
Link V0.8
Version 0.9
Camera switching fixed
Everything works
Working OTA
Link V0.9
Version 0.9.1
Fixed back video recording
Link V0.9.1
Version 0.9.5
Fixed flash issue
Should be bug-free
Link V0.9.5
Version 0.9.5.1
Fixes GCAM
Link V0.9.5.1
Version 1.0
Everything is stable now
New HAL1/HAL3 switch
Link V1.0
Always latest url: https://github.com/a-huk/otaserver/releases/download/09/lineage-17.1-20201115-UNOFFICIAL-daisy.zip
It is a zip, I suppose that it will be possible to flash it through TWRP, just clean flash as much as possible. I am not responsible for any harm this may do to your devices.
Again, please only post with feedback on the ROM, logcats would be useful as well or some benchmarks. I would like to make this stable and if possible official with Lineage. I know this forum is a mess, but again it is only for development. I will make propper one if this ever works. I need testers, thanks in advance. And props to the Potato Team
XDA:DevDB Information
LineageOS 17.1, ROM for the Xiaomi Mi A2 Lite
Contributors
reujea0
Source Code: https://github.com/a-huk/device_xiaomi_daisy
ROM OS Version: Android 10
Based On: LineageOS
Version Information
Status: Beta
Created 2020-04-02
Last Updated 2020-04-04
It boots, it runs great. No audio of any kind and camera (stock and GCam) not working. So far..
In any case, thanks for the rom and fast delivery.
Sorry, BT and headphones audio works for music and notifications.
celrau said:
It boots, it runs great. No audio of any kind and camera (stock and GCam) not working. So far..
In any case, thanks for the rom and fast delivery.
Sorry, BT and headphones audio works for music and notifications.
Click to expand...
Click to collapse
Thanks for the quick logcat
I will try and fix these, in the meantime, could you try this app https://play.google.com/store/apps/details?id=com.footej.camera2?
reujea0 said:
could you try this app https://play.google.com/store/apps/details?id=com.footej.camera2?
Click to expand...
Click to collapse
I tested camera with a camera app "vanilla" camera2 and it's not working..
reujea0 said:
Wew building for a wiko phone must have been a pain in the ass welp welcome in the community and good luck
~ Lacia
Click to expand...
Click to collapse
lacia-chan said:
reujea0 said:
Wew building for a wiko phone must have been a pain in the ass welp welcome in the community and good luck
~ Lacia
Click to expand...
Click to collapse
Yeah, plus that one was based off a Nvidia SOC
Click to expand...
Click to collapse
celrau said:
I tested camera with a camera app "vanilla" camera2 and it's not working..
Click to expand...
Click to collapse
Second testing version was released 0.2, see the link above
reujea0 said:
Second testing version was released 0.2, see the link above
Click to expand...
Click to collapse
heyo,
I have a few things to say:
- Your bringup is a mess
- Do your bringup on these trees https://github.com/PotatoDevices/device_xiaomi_daisy/tree/6180e3d5870834981e5f41424014047038ca235c
https://github.com/PotatoDevices/vendor_xiaomi_daisy
That will fix audio and cam
Thank you so much for your work. Imma fan of Lineage since the beginning and would prefer it over stock rom.
I dont want to be rude or anything but your bringup is quite a mess in my eyes and why is audio and **** not working for you since almost everything works fine here besides the wifi dsplay and fm radio
Click to expand...
Click to collapse
WTF!? It's for testing purposes only as OT says. Maybe u can contribute and help solving those issues?
reujea0 said:
Second testing version was released 0.2, see the link above
Click to expand...
Click to collapse
Everything I've tested works now, thanks for prompt delivery.
celrau said:
Everything I've tested works now, thanks for prompt delivery.
Click to expand...
Click to collapse
Sick, could you test some more things, like sd, calls, LTE, and run an ANTUTU benchark?
reujea0 said:
Sick, could you test some more things, like sd, calls, LTE, and run an ANTUTU benchark?
Click to expand...
Click to collapse
SD card works, calls I just tested with my other phone, LTE later since I don't have it at my current location. GPS works pretty good. I never used ANTUTU but will give it a try later.
---------- Post added at 11:34 AM ---------- Previous post was at 11:19 AM ----------
Notification/charging light not working
Cappucinto said:
Thank you so much for your work. Imma fan of Lineage since the beginning and would prefer it over stock rom.
WTF!? It's for testing purposes only as OT says. Maybe u can contribute and help solving those issues?
Click to expand...
Click to collapse
XD, I took a look at his commits and they looked like a mess and i linked him to my updated trees that have the audio and cam issue solved so next time read further into the message instead of trying to become a white knight thanks
lacia-chan said:
XD, I took a look at his commits and they looked like a mess and i linked him to my updated trees that have the audio and cam issue solved so next time read further into the message instead of trying to become a white knight thanks
Click to expand...
Click to collapse
Yeah they are a mess, getting started ?, haven't done this in a while. Yeah, this is pretty much your tree with your latest commits and some changes to convert it to a lineage tree. I also ignore neverallows to let the build finish. I will have to eventually deal with them to make it into an official build. In the meantime I plan on hosting an OTA server on my own. I am not hiding that most of this is your work, it is forked and I thank the POSP team and other devs who worked on the A2 Lite, thanks again. I just prefer LOS and there seems to be demand for it so I'm here trying to build it.
I don't think that there is a need for anyone to argue, we all have the same phone, more ROMs are always welcome and merit should be given where it is due, which I think has been done.
I will make another post in the following days, where everything is properly outlined with some more explanations.
reujea0 said:
Yeah they are a mess, getting started , haven't done this in a while. Yeah, this is pretty much your tree with your latest commits and some changes to convert it to a lineage tree. I also ignore neverallows to let the build finish. I will have to eventually deal with them to make it into an official build. In the meantime I plan on hosting an OTA server on my own. I am not hiding that most of this is your work, it is forked and I thank the POSP team and other devs who worked on the A2 Lite, thanks again. I just prefer LOS and there seems to be demand for it so I'm here trying to build it.
I don't think that there is a need for anyone to argue, we all have the same phone, more ROMs are always welcome and merit should be given where it is due, which I think has been done.
I will make another post in the following days, where everything is properly outlined with some more explanations.
Click to expand...
Click to collapse
oh no you got me wrong, Your credits were alrights its just that your source is a mess and that trees i linked have the issues like cam and audio fixed and nope more roms is not a great idea because we had a buildbot apocalypse earlier during the pie days we had like 42 roms at that point
That's awesome news @reujea0, congratulations!
LineageOS is all I need for this phone.
I'll move to this ROM as soon as it gets close to official (I use it as my daily driver).
lacia-chan said:
oh no you got me wrong, Your credits were alrights its just that your source is a mess and that trees i linked have the issues like cam and audio fixed and nope more roms is not a great idea because we had a buildbot apocalypse earlier during the pie days we had like 42 roms at that point
Click to expand...
Click to collapse
Yeah, can completely agree with this, but tbh I feel like Los is a must for any phone. I'm not saying that it is better/worse than other ROMs but anyone in the scene knows it and most of them are stable and close to AOSP.
reujea0 said:
Sick, could you test some more things, like sd, calls, LTE, and run an ANTUTU benchark?
Click to expand...
Click to collapse
LTE works fine
---------- Post added at 05:32 PM ---------- Previous post was at 05:20 PM ----------
lacia-chan said:
XD, I took a look at his commits and they looked like a mess and i linked him to my updated trees that have the audio and cam issue solved so next time read further into the message instead of trying to become a white knight thanks
Click to expand...
Click to collapse
Your intervention, well intended as you say it was should have been private, otherwise it is what it looks like.
---------- Post added at 06:26 PM ---------- Previous post was at 05:32 PM ----------
Please enable signature spoofing for MicroG
LineageOS still my favorite ROM.
Well, hope will be official soon.
EDIT : Could you please share the change log if the update is released ?
1st of all thank you so much, for starting this missing project, this afternoon i'll report more!
1. ZIP wouldnt install through TWRP (error: to Edit later) (deleted System/Data/Cache Stuff, from Android 9), so unpacked payload.bin, and flashed manually in fastboot from stock 9.
2. One permission which is needed for MicroG with Playstore (no gapps) I think something like certificate/signing spoofing is missing. (Specify later)
Besides that feels quite stable, safety net passed with opengapps/magisk, can comfirm wifi, camera, sound works. Noticed nothing wrong, will test more today, right now writing in this Rom!
Someone asked for antutu Benchmark? Could not run it, inside the tutorial the "which OS are you using" wasnt clickable, probably because off the app itself? But:
3D Mark
853 points - my A2 Lite LOS 17.1 > 56% than other A2 Lite's
(Average)