[Firmware][SM-T217A] Requesting assistance from someone with 4.4.2 - Galaxy Tab 3 Q&A, Help & Troubleshooting

After noticing the only available firmware to flash was actually 4.2.2 my OP became meaningless.
If you know where I can find a stock 4.4.2 firmware
OR
If there is anyone with this device that can possibly send me a backup of the same device running 4.4.2 I may be able to fix my device.
I'm currently missing a recovery, and can only get into download mode due to misreading the version number on a firmware image. (My fault for not paying attention but I still hate knox)
If anyone is able to help me with this issue I would be really grateful.
If all else fails I'll see about sending it back to Samsung but they may tell me I'm out of luck.
Thanks

Just noticed that the firmware from sammobile is 4.2.2
No wonder its not working, doesn't explain why kies wont work though...
anyone know where to get the 4.4.2 firmware ?

I am having this issue my self. Can't believe kies doesn't have the right firmware! I wasted my entire day to find out that it was trying to install 4.2.2! Gah please if anyone has 4.4.2 please post links!!!

Related

[Q] Need Some Help

Can any of you fine chaps perhaps get the latest stock firmware of the SPH-L520 if at all possible? I've gotten myself into a mighty fine rut, and I won't be able to dig myself back out without the firmware. Unfortunately the latest stock image I have is several months old, and Knox prevents me from actually loading it into my ROM. Thanks in advance, and hopefully one of you guys can help me
Never mind, was able to flash a 4.4.2 ROM

[Q] Flash T210 4.4.2 firmware into T2105?

Hi, i bought a Galaxy Tab 3 7" Disney Edition but i don't care about kids stuffs, is it possible to flash it with latest T210 (ITV) firmware 4.4.2 with Odin?
My model is T2105 (ITV) and is still at 4.1.2
Thanks
It might work. Flash a custom (TWRP) recovery to backup the device first, then give it a try. Only problem is, anything could brick the device since there seems to be little to no info.
Some ideas:
Soe ifo on the recovery:
from http://forum.xda-developers.com/galaxy-tab-3/general/root-sm-t210-r-using-heimdall-t2936061
I used the Pit mapping for the T210. The recovery partition is "mmcblk0p10." I checked the partition info on my T210R using Partition Table by Lakshman. The T210R also has its Recovery partition on "mmcblk0p10," so I expect it to work no problem. And TWRP Odin flashables tend to be compatible with several 7.0 variants.
Click to expand...
Click to collapse
TWRP for tab 3 7.0
https://www.androidfilehost.com/?w=files&flid=12871
PIT files and info:
http://forum.xda-developers.com/showthread.php?t=2722948
ROMs
http://forum.xda-developers.com/galaxy-tab-3/general/tab-3-7-0-sm-t210-r-stock-4-4-2-kitkat-t2930075
CAUTION: Anything could result in bricking the device. Any attempt without any confirmed information is acceptance of the fact that the device may become completely unusable.
Please be willing to lose functionality of the device if you proceed.
There do seem to be Odin flashables for the 4.1 software, which should be able to recover the device, but I would obtain one of those first.
If you proceed, please keep us updated so that other users out there can find this information
Greaper88 said:
It might work. Flash a custom (TWRP) recovery to backup the device first, then give it a try. Only problem is, anything could brick the device since there seems to be little to no info.
Some ideas:
Soe ifo on the recovery:
from http://forum.xda-developers.com/galaxy-tab-3/general/root-sm-t210-r-using-heimdall-t2936061
TWRP for tab 3 7.0
https://www.androidfilehost.com/?w=files&flid=12871
PIT files and info:
http://forum.xda-developers.com/showthread.php?t=2722948
ROMs
http://forum.xda-developers.com/galaxy-tab-3/general/tab-3-7-0-sm-t210-r-stock-4-4-2-kitkat-t2930075
CAUTION: Anything could result in bricking the device. Any attempt without any confirmed information is acceptance of the fact that the device may become completely unusable.
Please be willing to lose functionality of the device if you proceed.
There do seem to be Odin flashables for the 4.1 software, which should be able to recover the device, but I would obtain one of those first.
If you proceed, please keep us updated so that other users out there can find this information
Click to expand...
Click to collapse
Ok thanks, i'll try and report it; if Odin fails, is rhere a flashable zip file of stock rooted 4.4.2 so i can try to flash in recovery?
code72 said:
Ok thanks, i'll try and report it; if Odin fails, is rhere a flashable zip file of stock rooted 4.4.2 so i can try to flash in recovery?
Click to expand...
Click to collapse
You can try The Nolekat Rom. It is fest Best Customrom for our Tab.
Sooooo.....
Did it work? Im curious as I got the T2105 tab for my kid and the darn thing is really slow for running Spider- Man Unlimited and some other apps
I want to put Cyanogenmod on it or some other rom with less crap
Ive been after the answer to this as well. I have the 2105 myself, and have TWRP installed and root, but not one single custom rom has worked. They just bootloop. Then you have to ODIN the stock rom. I have the original rom from sammobile, but they only have the factory 4.1.2 roms. Im wondering if a stock rom from the 210r or another Tab3 wifi rom would work.
It seems almost every tab3 from around the globe has been updated to 4.4.2 except this one...ive been checking sammobile everyday, but still no update for the 2105...
juggalofr33k said:
Ive been after the answer to this as well. I have the 2105 myself, and have TWRP installed and root, but not one single custom rom has worked. They just bootloop. Then you have to ODIN the stock rom. I have the original rom from sammobile, but they only have the factory 4.1.2 roms. Im wondering if a stock rom from the 210r or another Tab3 wifi rom would work.
It seems almost every tab3 from around the globe has been updated to 4.4.2 except this one...ive been checking sammobile everyday, but still no update for the 2105...
Click to expand...
Click to collapse
Your Bootloop prob is like the same as we have on The other device.
Flash a recovery with The Kitkat KK extension.
Well, actually its not a bootloop...it just reboots to recovery. Ill give a KK recovery a shot. any suggestions on which one would be the best? Or the recovery most likely to work? CWM or TWRP? Anything to get this off JB and onto KitKat...lol.. Apprecitae your help!
juggalofr33k said:
Well, actually its not a bootloop...it just reboots to recovery. Ill give a KK recovery a shot. any suggestions on which one would be the best? Or the recovery most likely to work? CWM or TWRP? Anything to get this off JB and onto KitKat...lol.. Apprecitae your help!
Click to expand...
Click to collapse
Yes, thats bootloop into recovery.
I prefere CWM or PhilzTouch on all my device.
Right on. Ill give those recoveries a shot. I have used CWM in the past (HTC Aria), but ive been using TWRP since i got the Galaxy Nexus. Ill give them both a try and report back in a few days... My internet connection sucks ass, so it takes hours to download a rom...
code72 said:
Hi, i bought a Galaxy Tab 3 7" Disney Edition but i don't care about kids stuffs, is it possible to flash it with latest T210 (ITV) firmware 4.4.2 with Odin?
My model is T2105 (ITV) and is still at 4.1.2
Thanks
Click to expand...
Click to collapse
Its amazing that everyone is posting when they have question but no one cares to post their findings. I (also an owner of Galaxy Tab3 Kids T2105 bought in Australia) was fed up with the old and slow firmware. So, I decided to go ahead and flash a new firmware (T210XXBNI1 4.4.2 UK upgrade for SM-T210). First I tried to upgrade with Odin 3.9 but the process would fail after "Nand Write Start". Then I tried it with Odin ver. 3.07 and the process went smoothly and now I am a proud owner of Samsung Galaxy Tab3 with 4.4.2 Kitkat. It does feel a little bit swifter than the Jellybean. Anyways, so far so good. Will post if encountered any problem !
thethakuri said:
Its amazing that everyone is posting when they have question but no one cares to post their findings. I (also an owner of Galaxy Tab3 Kids T2105 bought in Australia) was fed up with the old and slow firmware. So, I decided to go ahead and flash a new firmware (T210XXBNI1 4.4.2 UK upgrade for SM-T210). First I tried to upgrade with Odin 3.9 but the process would fail after "Nand Write Start". Then I tried it with Odin ver. 3.07 and the process went smoothly and now I am a proud owner of Samsung Galaxy Tab3 with 4.4.2 Kitkat. It does feel a little bit swifter than the Jellybean. Anyways, so far so good. Will post if encountered any problem !
Click to expand...
Click to collapse
thanks for report thethakuri... i tried to do this too, but for me it doesnt work ... after i installed the 4.4.2, i had a black screen on boot and my tablet dont charge offline... so, i turned to 4.1.2... can you give me any sugesttion?
Update from me: Just upgraded my US SM-T2105 Kids tablet to the UK KK version as well (T210XXBOA3_T210BTUBOA2_Home.tar.md5). Did not work with Odin 3.11 but worked with 3.07 as mentioned above.
The Tab3 Kids is so far holding up very well with the 4.4.2 Firmware. Much more responsive.
Only issue I have is that it switches on when charging and the screen is not very responsive afterwards. A reboot fixes that.
I came across a post somewhere that there is a new bootloader required to fix that but I can't find the post anymore . If someone has that link please post it here. Thanks !
idefix_sin said:
The Tab3 Kids is so far holding up very well with the 4.4.2 Firmware. Much more responsive.
Only issue I have is that it switches on when charging and the screen is not very responsive afterwards. A reboot fixes that.
I came across a post somewhere that there is a new bootloader required to fix that but I can't find the post anymore . If someone has that link please post it here. Thanks !
Click to expand...
Click to collapse
Did you ever find a fix for the screen issue? I'm going to give this a shot this weekend my daughter really wants pokemon go on her tablet!
Unfortunately I could not find it anymore.
Using ours now just with the new firmware and make it a conscious effort to switch it off after charging it. So far works fine.
idefix_sin said:
Unfortunately I could not find it anymore.
Using ours now just with the new firmware and make it a conscious effort to switch it off after charging it. So far works fine.
Click to expand...
Click to collapse
thanks.. by the way did use a recovery? or just flash T210XXBOA3_T210BTUBOA2_Home.tar.md5 with oden?
Hi.
Will update to 4.4.2 would enable the move app to sd card?
Thank you.
any solution to remove kids feature
Root the device and uninstall using root uninstaller.

[Q] Attention Drive Link users. I currently have NJ1 firmware.. Is there hope

I picked up a used AT&T S3 here in NY because I just installed an Alpine ICS-X7HD in my car. The S3 had the latest NJ1 installed. I was able to root the phone OK. My research has lead me to believe that I won't be able to get any version of Drive Link running on Android 4.4 without FCing when connecting to the Alpine Unit. Research also seems to suggest that I can't go back to the LK3 version either due to boot loader changes made from Samsung and AT&T with the 4.3 update. So I'm looking for advice from the forum experts on what I can do, if anything to get the phone downgraded to a Jelly Bean firmware. I am hoping to hear from someone who has been able to do this before. Can I go from 4.4.2 to 4.3? If so does Drive link still work for you?
I am comfortable using Odin and adb. Let me know if you need any other specific information.
The solution was so incredibly simple. I flashed the AT&T+UCMG2.ZIP through TWRP and rebooted. Now I am on 4.1.2. Drive Link working! So To Recap...I went from 4.4.2 NJ1 back to 4.1.2 and stayed on NJ1 baseband.
Dbeayon said:
I picked up a used AT&T S3 here in NY because I just installed an Alpine ICS-X7HD in my car. The S3 had the latest NJ1 installed. I was able to root the phone OK. My research has lead me to believe that I won't be able to get any version of Drive Link running on Android 4.4 without FCing when connecting to the Alpine Unit. Research also seems to suggest that I can't go back to the LK3 version either due to boot loader changes made from Samsung and AT&T with the 4.3 update. So I'm looking for advice from the forum experts on what I can do, if anything to get the phone downgraded to a Jelly Bean firmware. I am hoping to hear from someone who has been able to do this before. Can I go from 4.4.2 to 4.3? If so does Drive link still work for you?
I am comfortable using Odin and adb. Let me know if you need any other specific information.
Click to expand...
Click to collapse
How did you root on Nj1??!
To get to jelly bean, you do the hack like method above by flashing a zip in TWRP or Clockwork mod or boot a custom rom based off 4.1.x. Once you are on 4.3 or 4.4, there is no going back to a previous version, attempts result in bricking.

[Q] Update Failed? Problems while updating to 4.4.4)

Hi,
My name is Asaf and I have a kinda weird problem:
I cannot update my phone to 4.4.4 (it's on 4.4.2)
My model is 4.4.2.
So the thing is:
I tried to update and it failed,
tried again and again for 2 months and I still can't.
Today I've installed Samsung Kies 3 and it failed to update.
I live in Israel and I don't think it matters.
It is T Mobile's phone and they aren't working in israel all tough I can call and SMS and use my 3G.
I don't want to flash and I am unrooted (I had root) and I have 3.5GB of memory.
Device Information:
Android Version: 4.4.2
Model Number: GSH-M919
Firmware Number/Build Number: M919UVUFNB4
Kernel Version: 3.4.0-540242
I got my phone from T Mobile
My carier is: Golen Telecom (again, I'm from Israel, this is an Israeli company.)
Thanks for helping!
You need to provide much more information like exact model number, exact firmware version that's running on phone now, what carrier your using and also your shoe size.
In order to get the best help you need you must provide better info.
You may be trying to install the wrong update.
Pp.
PanchoPlanet said:
You need to provide much more information like exact model number, exact firmware version that's running on phone now, what carrier your using and also your shoe size.
In order to get the best help you need you must provide better info.
You may be trying to install the wrong update.
Pp.
Click to expand...
Click to collapse
I did update the topic, try helping me ok?
and It's my phone's update I can't do that wrong.
Go here http://forum.xda-developers.com/showthread.php?p=54155517 follow instructions in post #8 , if doesn't work the first time do a factory reset then repeat procedure with odin 3.07 .
Refer to YouTube on how to flash firmware tmobile S4, there are many videos on this subject, just make sure it's tmobile, not Att or Verizon.
You should have no issues.
Afterwards you can use Chainfire's autoroot to root new firmware.
Pp.
PanchoPlanet said:
Go here http://forum.xda-developers.com/showthread.php?p=54155517 follow instructions in post #8 , if doesn't work the first time do a factory reset then repeat procedure with odin 3.07 .
Refer to YouTube on how to flash firmware tmobile S4, there are many videos on this subject, just make sure it's tmobile, not Att or Verizon.
You should have no issues.
Afterwards you can use Chainfire's autoroot to root new firmware.
Pp.
Click to expand...
Click to collapse
As I told you I want to update without installing any roms.
I don't want my phone's getting ruined and my dad's killing me..
So please if you have some answers or something that can help be sure to tell me.
AsafOV said:
As I told you I want to update without installing any roms.
I don't want my phone's getting ruined and my dad's killing me..
So please if you have some answers or something that can help be sure to tell me.
Click to expand...
Click to collapse
Download this free app from the Play Store:
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Then, take screen shots of the General, Firmware and Android screens. (You can take screenshots by holding down the Power and Home at the same time until you hear the camera sound).
Then, post those screens.
This will tell us what you have.
My guess is that the T-Mobile OTA updates may not work for phones outside of the US, but I could be wrong.
You may have to flash the phone using ODIN if you have a Windows PC. There are lots of threads on flashing the Stock Roms.
You can download the firmware from either Sammobile.com or this thread: http://forum.xda-developers.com/galaxy-s4-tmobile/general/firmwares-official-mdl-mk2-nb4-t2816508
Rob
AsafOV said:
As I told you I want to update without installing any roms.
I don't want my phone's getting ruined and my dad's killing me..
So please if you have some answers or something that can help be sure to tell me.
Click to expand...
Click to collapse
Its not a rom it's a firmware, official from Samsung, which is exactly what an update does. Other than an OTA, it is the only way to update your device

Need advice n7105 strange knox bootloop with every rom but 4.1.2 stock after cm10.1

Hello,
I'm a noob but usually try to fix this kind of issues on my own, looking at the boards, following tutorials, learning, but this time I think I'm not able to find a solution on my own so I'm asking for advice here.
Some time ago I installed cyanogenmod 10.1 on my Note 2 LTE and was happy with it for some month, than last week I tried to upgrade to cm12.1 It worked but there where some issues and bugs, mainly I wasn't able to swap internal/external sd cards.
So I decided to go back to latest available stock rom 4.4.2 from sammobile.
Here is where the problem starts. The stock 4.4.2 resulter in a bootloop, tried cache/dalvik/factory reset, flash again, whipe again.. nothing.
The phone is not able to get past the white label "Samsung Note 2 gt-n7105" screen. It goes black than the white label again and again.
It doesn't even get to the Samsung animated logo.
Ok bottloop, no problem, try to flash again something else.
I tried different Custom roms, different kernels, different flashing methods. I can flash anything with no problem but every time a get a bootloop.
During the various attempts knox fired, but I don't care. I don't know if this could be the cause.
Actually the only firmware that works is the original oldest STOCK 4.1.2, every other stock firmware past that or any custom rom is bootlooping the same way. To fix I only can reinstall stock 4.1.2 with odin.
I really need any advice or hint.
At the moment my goal is to get at least to stock 4.3 but I cant.........
Thanks!
When you first bought your phone, did it come with Knox?
ErnestChia said:
When you first bought your phone, did it come with Knox?
Click to expand...
Click to collapse
nope it doesn't existed before, but now I can see it when I boot in download mode "knox warranty void:1"
Try to get the latest firmware available via kies ,that worked for me
http://forum.xda-developers.com/showthread.php?t=2088809/[URL]
From what you've described, I think the Stock ROM 4.4.2 from Sammobile contained a bootloader update. So when you flashed this ROM, it updated your bootloader from the non-Knox version to the Knox version.
I am very unfamiliar with the technical details of Knox, but I think the new Knox bootloader is causing your bootloop problem.
However, I don't know why 4.1.2 works when everything else doesn't work!
Can you check the Stock ROM 4.4.2, and see whether it really contains a bootloader update?
mysuperdonghae said:
Try to get the latest firmware available via kies ,that worked for me
http://forum.xda-developers.com/sho...can flash cm10, 11 and 12 with no issue too..
Click to expand...
Click to collapse
misthero said:
I think so, there is a boot.im, anyway I also discovered that I can flash cm10, 11 and 12 with no issue too..
Click to expand...
Click to collapse
Since a boot.img is present, it means that it would flash your boot partition. So now we know for sure that when you attempted to flash the Stock ROM 4.4.2, your bootloader was changed to the Knox version.
So the lesson here is: before you flash anything via ODIN, always check to see if there is a bootloader update. Usually you don't want to be changing the bootloader on your phone.
***
So now there are 2 possible ways to reach your goal:
1) Keep your new bootloader and see whether you can get Stock 4.3 or Stock 4.4.2 running on your phone
2) Try to restore your old bootloader
As I said earlier, I'm not familiar with the technical details of Knox, so I'm not sure how to get Stock 4.3 or Stock 4.4.2 running on your phone when your Knox indicator is already 0x1. You need someone else to help you.
And you can only restore your old bootloader if you happen to have made a copy of your boot partition before you flashed the Stock ROM 4.4.2. Even if you did have a copy of your original boot partition, I'm not confident with helping you to restore your old bootloader. You need someone else to help you in this case too.
Conclusion: I don't think I can help you to solve your problem I'm sorry. Hopefully someone else who is more of a pro than me will come along to help you out.
Good luck!

Categories

Resources