Has anyone been able to get Viper4android working on this phone? I've installed and uninstalled it several times now. It has worked briefly and sounds so good that I keep trying. But it never sticks. It'll be working at 6pm and then I'll try again at midnight and nothing. Could it have to do with permissions on the Mate 8?
I'd love to hear from someone able to get it to work consistently.
I have it installed as a system app, by the way, but I've tried it as a user app as well and had the same issues.
Thanks!
Viper4Android works great for me.
You just have to flash the SELinux Permissive zip from this thread: http://forum.xda-developers.com/android/software/app-material-viper4android-2-3-4-0u-t3190352
Wrong area. Post this in Q&A
eintracht1895 said:
Viper4Android works great for me.
You just have to flash the SELinux Permissive zip from this thread: http://forum.xda-developers.com/android/software/app-material-viper4android-2-3-4-0u-t3190352
Click to expand...
Click to collapse
I had done all that - permissive mode, made sure I had the right busybox - by following (at various time) about 4 different guides.
The good news is that it's suddenly working again today, and it sounds phenomenal!
You must be root?
En español: Se requiere ser root?
ORUAM said:
You must be root?
Click to expand...
Click to collapse
Yes, no root = no Viper.
I do everything but it's not working ):
azoojeddah said:
I do everything but it's not working ):
Click to expand...
Click to collapse
Flash KangVIP and it's done.
Gesendet von meinem Huawei Mate 8
hmmh so im on android 6 emui 4, im rooted, busybox installed, permissive zip flashed, v4a version 2.4.0.1 driver says supported and enabled and stuff, but it doesnt seem to work :/
mixpimp said:
hmmh so im on android 6 emui 4, im rooted, busybox installed, permissive zip flashed, v4a version 2.4.0.1 driver says supported and enabled and stuff, but it doesnt seem to work :/
Click to expand...
Click to collapse
Make sure your V4A has access to storage under the App permissions.
Related
Hello, Yesterday I rooted succesfully my H815P and I wanted to add viper4android but whenever I open it, it asks me to instal drivers, but they never get installed, what should I do? by the way I installed ROOT with low efort
Not sure, but didn't V4A require SELinux to be Permissive? In that case V4A would only run on a custom kernel or if you built an own stock kernel with permissive. But I'm not sure if it's needed, not really using Viper
SELinuxModeChanger from Play store may do the dirty job.
GUGUITOMTG4 said:
SELinuxModeChanger from Play store may do the dirty job.
Click to expand...
Click to collapse
Apps like this probably won't work on Android 5 though
mythos234 said:
Apps like this probably won't work on Android 5 though
Click to expand...
Click to collapse
It was banned from play as I jut saw, but it does work on my G4 h811 look it up on xda
GUGUITOMTG4 said:
It was banned from play as I jut saw, but it does work on my G4 h811 look it up on xda
Click to expand...
Click to collapse
It still works? Good to hear, on Samsung those apps no longer work, thats where I'm coming from - It's a different world there hahaha
http://forum.xda-developers.com/showpost.php?p=62107040&postcount=109
Hello People,
Here I will share how to install ViPER4Android FX (Pre-installs Driver) on Mi A1
Note: Only Old Version is Working (Latest Version always asking to reinstall drivers)
Required:
Root
TWRP
Download ViPER4Android v2.4.01.zip (Copy it to Internal Memory)
flash zip from TWRP Recovery, Reboot and Enjoy..
Zip File Credits to Guitardedhero
Is it working properly?
Sent from my Mi A1 using Tapatalk
Prince Abhinav Gupta said:
Is it working properly?
Sent from my Mi A1 using Tapatalk
Click to expand...
Click to collapse
For me it's working nicely. Flashed with temporary TWRP.
can this be used in custom rom oreo?
I use the 2.3.4.0 from magisk with no problems.
Will not be easier to install by magisk?
Polluktus said:
Will not be easier to install by magisk?
Click to expand...
Click to collapse
Hope you tried this and it worked?
Can anyone share the settings for the phone speakers??
oke guys.. i need the info.. like would it be better to just fpash from magisk on modules magisk .. or using hot boot twrp temporaly pike those up above ?
iSEKAI said:
oke guys.. i need the info.. like would it be better to just fpash from magisk on modules magisk .. or using hot boot twrp temporaly pike those up above ?
Click to expand...
Click to collapse
Don't think it makes a difference.
How to uninstall it.?
SandeepMaurya7 said:
How to uninstall it.?
Click to expand...
Click to collapse
Maybe flashing again.
nope re-flashing doesn't uninstall! not working and won't uninstall now smh
huh, I installed v4a with magisk as well and now working... ?
Hello guys,
I decided to make this post as I saw a lot of questions about this and as well a zip flashed to make safetynet pass on custom roms.
Well with this one, you will have play store certified as well as pass safetynet and will get no annoying message at the phone starting.
What we will do is change our fingerprint to a certified one. So here it is:
1. You need to be rooted with magisk.
2. You need to have any terminal emulator, you can download any on the play store.
3. Go to downloads on magisk and download the module: "Magiskhide props config", install and reboot.
4. After you had your device rebooted, open terminal emulator and type:
Su
Allow super user.
5. Now type:
Props
A list of options will appear. What we need from the module is choose a certified fingerprint. So we will choose option 1.
After option 1, you need to choose the option with letter "f" which is pick a certified fingerprint.
Then we will have a list of brands, we need to, of course, choose Xiaomi, option 11.
After we pick xiaomi, we need to pick our device, which is vince, XRN5/ XR5P option 16.
Then it will as us twice if we are sure, we type letter "y" twice to confirm and reboot
After rebooting you can see safetynet ctsprofile:true and play store certified.
I have tried in almost all roms around here including the miui ones and always worked flawlessly, hopefully it helps you also.
Any questions, post it here. Remember that you need to press enter after picking any choice.
Credits: @Didgeridoohan creator of the module
I'm using Havoc OS (8.1) and whenever I try to check the safenety pass, the magisk closes.
Can you make a tutorial for custom rom like pixel experience?
Is working man thanks I'm rr rom
Allhunt said:
I'm using Havoc OS (8.1) and whenever I try to check the safenety pass, the magisk closes.
Click to expand...
Click to collapse
Are you using latest magisk manager version? I am on that rom also, magisk 5.8.1. Working fine here.
clintandrewph said:
Can you make a tutorial for custom rom like pixel experience?
Click to expand...
Click to collapse
This is the tutorial bro, it is made for all custom AOSP and MIUI Roms, it should work with no issues.
luisrosales0130 said:
Is working man thanks I'm rr rom
Click to expand...
Click to collapse
You're welcome man. Glad to help.
Dunno why i got Bluetooth issues after install I'm using resurrection remix 8.1.0 is something relating this module?
luisrosales0130 said:
Dunno why i got Bluetooth issues after install I'm using resurrection remix 8.1.0 is something relating this module?
Click to expand...
Click to collapse
Nope, I have my Bluetooth controller connected with no issues whatsoever. This just makes a change in build.prop that has nothing to do with wireless radios.
Tried this but didn't work.... I'm on RR rom latest build...
Please help
Shree26 said:
Tried this but didn't work.... I'm on RR rom latest build...
Please help
Click to expand...
Click to collapse
If you give me more info maybe I can help. Can you give me screenshots of the module being active and the props changed on the terminal emulator?
Jemec26 said:
If you give me more info maybe I can help. Can you give me screenshots of the module being active and the props changed on the terminal emulator?
Click to expand...
Click to collapse
Did all the steps and rebooted the phone.
Still ctsprofile is false
Shree26 said:
Did all the steps and rebooted the phone.
Still ctsprofile is false
Click to expand...
Click to collapse
And the screenshots?
Jemec26 said:
And the screenshots?
Click to expand...
Click to collapse
Here u go..
Shree26 said:
Here u go..
Click to expand...
Click to collapse
if you not using xposed, voenabler module can be the culprit...
Shree26 said:
Here u go..
Click to expand...
Click to collapse
Thanks, I tested this on Vince . Did not know you were using whyred. In that case, I can't really tell you what happens there.
Even though fingerprinting with nougat rom is ok, is there any oreo working fingerprint that passes cts?
Question: didnt nougat fingerprint interfere when flashing other general files which checks the android version before flashing?
Reykawick said:
Even though fingerprinting with nougat rom is ok, is there any oreo working fingerprint that passes cts?
Question: didnt nougat fingerprint interfere when flashing other general files which checks the android version before flashing?
Click to expand...
Click to collapse
1. There will not be until Miui 10 with 8.1 Oreo stable version is released. Then I guess module creator will update the fingerprint as it will be certified.
2. No. It does not interfere.
I have a question: I don't like to have my phone rooted. If after following your guide I remove root, will it work?
Thanks.
Samuele Ribaudo said:
I have a question: I don't like to have my phone rooted. If after following your guide I remove root, will it work?
Thanks.
Click to expand...
Click to collapse
Well, if you remove root, module will be deactivated. So it won't work then.
I'm on stock Oreo with Magisk, custom Kernel, Android Pay working, v4a working, custom recovery, CF+lumen, and a few others.
Can I accomplish that on Pie right now?
I was updating a bunch of magisk stuff and messed up the system today, so I need a clean install.
Working Bluetooth reliably is a must.
Thanks!
Sent from my Pixel XL using Tapatalk
MeetFace said:
I'm on stock Oreo with Magisk, custom Kernel, Android Pay working, v4a working, custom recovery, CF+lumen, and a few others.
Can I accomplish that on Pie right now?
I was updating a bunch of magisk stuff and messed up the system today, so I need a clean install.
Working Bluetooth reliably is a must.
Thanks!
Click to expand...
Click to collapse
Yup. Pie works beautifully my friend. I've had v4a, Android pay working , of course a custom kernel and it's great.
Phalanx7621 said:
Yup. Pie works beautifully my friend. I've had v4a, Android pay working , of course a custom kernel and it's great.
Click to expand...
Click to collapse
Have you followed any tutorials that would be helpful? I know magisk and v4a and kernels can be finnicky if you go in the wrong order.
NM, here it is =]
https://forum.xda-developers.com/pixel-xl/how-to/guide-pixel-xl-android-9-0-pie-unlock-t3825866
Sent from my Pixel XL using Tapatalk
@Phalanx7621 I'm having trouble installing v4a. I've got benzo with Magisk and Elemental atm. When in TWRP it says "Error 2" when installing the v4a zip I got from the Zackptg5 website. Any ideas?
MeetFace said:
@Phalanx7621 I'm having trouble installing v4a. I've got benzo with Magisk and Elemental atm. When in TWRP it says "Error 2" when installing the v4a zip I got from the Zackptg5 website. Any ideas?
Click to expand...
Click to collapse
Yeah you don't install it via a zip in recovery, it's a Magisk Module you install through Magisk.
Interesting. I guess that's a Pie thing. There's a zip created specifically for Magisk that has been troubleshot with Pixel in mind. Worked great on Oreo.
I'll try that, thanks!
Phalanx7621 said:
Yeah you don't install it via a zip in recovery, it's a Magisk Module you install through Magisk.
Click to expand...
Click to collapse
Sent from my Pixel XL using Tapatalk
MeetFace said:
Interesting. I guess that's a Pie thing. There's a zip created specifically for Magisk that has been troubleshot with Pixel in mind. Worked great on Oreo.
I'll try that, thanks!
Click to expand...
Click to collapse
Yup. Make sure you install the viper called FX not the other one.
Did you have to install. Any other mods? AML, Notification Helper Remover, etc?
Sent from my Pixel XL using Tapatalk
MeetFace said:
Did you have to install. Any other mods? AML, Notification Helper Remover, etc?
Click to expand...
Click to collapse
Not sure haven't used those.
I'll be that guy and say that battery life on pie sucks major
Yeah, my battery life has been miserable thus far. 3 hrs SOT, pretty bad.
Sent from my Pixel XL using Tapatalk
Hello everyone.
Did someone succeed to get XprivacyLua running on this device ?
Just got the OP7T from HongKong (HD65BA Europe). I have to use Chinese apps and I they ask full access to my phone. I don't like this.
I tried some guides here and so far didn't succeed to boot with edExposed running.
Thanks
Could you use App Ops to revoke some of the permissions? https://play.google.com/store/apps/details?id=rikka.appops&hl=en_GB
adobrakic said:
Could you use App Ops to revoke some of the permissions? https://play.google.com/store/apps/details?id=rikka.appops&hl=en_GB
Click to expand...
Click to collapse
Thanks for the suggestion. I'm trying Appops and it seems to work well.
Update :
Successfully installed Xposed.
I'm also trying Protect My Privacy (PMP) Xposed module, but it seems to be unstable.
I'm still interested in any other suggestion to protect my privacy in China
So anyone able to get Xprivacylua working with Taichi?
Aswin08 said:
So anyone able to get Xprivacylua working with Taichi?
Click to expand...
Click to collapse
On my side, I got Xprivacylua 1.25 working with edXposed v0.4.6.0_beta (4471 YAHFA) on Magisk 20.1.
Didn't try with Taichi.
Farkas21 said:
On my side, I got Xprivacylua 1.25 working with edXposed v0.4.6.0_beta (4471 YAHFA) on Magisk 20.1.
Didn't try with Taichi.
Click to expand...
Click to collapse
Okay.The newer 1.27 is not working or you didn't try?
Aswin08 said:
Okay.The newer 1.27 is not working or you didn't try?
Click to expand...
Click to collapse
I didn't try to update anything since everything is working fine for me. BTW Is there a reason why I should ?
Farkas21 said:
I didn't try to update anything since everything is working fine for me. BTW Is there a reason why I should ?
Click to expand...
Click to collapse
Nah, ignore if things are fine.
But 1.27 or 1.26 is the one released with official support for Android 10. I tried initially when i bought the phone 4 months back but i got into bootloop with these versions(same Edxposed version as yours). I never tried with 1.25.
Changelog for 1.26 which was released in Nov 2019,
Dynamic hook bug fix, thanks @F-i-f
Built for Android 10
Updated translations
Now am using Taichi, since it seems more stable with Pixel AOD.