Related
Hey Everyone,
This is my first post here on XDA. I've been around for a while and always try to read a lot before attempting anything so as not to break stuff; hence the reason for no posts so far. I appreciate all of the helpful information I find on these forums and it has been great for keeping my trusty Dinc running well and running the latest Android OS.
I have been busy with school, but finally have some time to sit down and bang out some Android development, leading me to my
Question/problem: I am attempting to build android from source to get up and running on being able to create my own ROMs or help contribute to others and I've run into a problem. I'm stuck in a boot-loop during the CM9 boot animation. I have a logcat dump during the boot that shows the errors and the cycle of it trying again and again, but I'm not sure where to go next.
Background:
I have been running drk.hd's CM9 ROM for the last month or so (http://forum.xda-developers.com/showthread.php?t=1558923) and I have enjoyed it. It works very well. He has build instructions posted on his github here: https://github.com/drkhd/android_device_htc_inc. I have followed those steps exactly as posted, which all work as expected. I have not run into any build/compile errors, but after flashing the zip file, I end up in the boot-loop.
Logcat:
I pasted the logcat here: http://pastebin.com/wVVbmeRY
The last ~400 lines just repeat until killing the logcat. I can see errors about media services dying and a fatal signal 11, but again, I'm not sure what to do with this information.
Any help is much appreciated. I know this should really be in the dev forum, but as I mentioned, this is my first post; I don't have 10 posts yet, so I cannot post in the dev forum until that point. I am really just starting to dig into this stuff, so go easy on me and help guide me in the right direction so I can take things and run with them. Once I get a feel for how best to approach android development, I should be able to pick it up pretty easily.
Thanks
I know this thread should really be in the dev forum, but if any of you have any suggestions or can at least point me in the right direction for where to look for answers, that would be great.
Thanks again
Dezier11 said:
I know this thread should really be in the dev forum, but if any of you have any suggestions or can at least point me in the right direction for where to look for answers, that would be great.
Thanks again
Click to expand...
Click to collapse
This is the right forum. Development threads are meant to be for ROM and other development support, Q&A is where I would ask about this too but I guess the other devs either aren't around or don't know how to answer your question. cmlusco is a dev of touch of blue and he lingers around Q&A a lot so maybe if he comes across this he can give you some insight. I would really like to get into building ROMs as well but I don't have any experience in coding just yet. I don't really know what kind of experience is required to build ROMs either and my only Ubuntu machine is 32-bit so I am essentially out of the race for now. That being said, I found this guide that I was going to use for my own building ventures until I realized I needed a 64-bit machine but maybe it can help you or maybe the support can give you a little direction. I hope this helps!!
http://forums.androidcentral.com/ve...99-guide-ubuntu-compiling-android-source.html
nschiwy said:
This is the right forum. Development threads are meant to be for ROM and other development support, Q&A is where I would ask about this too but I guess the other devs either aren't around or don't know how to answer your question. cmlusco is a dev of touch of blue and he lingers around Q&A a lot so maybe if he comes across this he can give you some insight. I would really like to get into building ROMs as well but I don't have any experience in coding just yet. I don't really know what kind of experience is required to build ROMs either and my only Ubuntu machine is 32-bit so I am essentially out of the race for now. That being said, I found this guide that I was going to use for my own building ventures until I realized I needed a 64-bit machine but maybe it can help you or maybe the support can give you a little direction. I hope this helps!!
http://forums.androidcentral.com/ve...99-guide-ubuntu-compiling-android-source.html
Click to expand...
Click to collapse
I would love to help but i have no clue how to build from source. All i know how to do is take stock roms and modify and tweak them. I do not have a linux setup, i use win 7 with cygwin and android kitchen. Android kitchen does a lot of the work for you. Apktool is another great windows program for decompiling and recompiling apks. It just takes time to tweak and modify everything. Google and xda are your best friends, you can find the answer to just about anything you want.
cmlusco said:
I would love to help but i have no clue how to build from source. All i know how to do is take stock roms and modify and tweak them. I do not have a linux setup, i use win 7 with cygwin and android kitchen. Android kitchen does a lot of the work for you. Apktool is another great windows program for decompiling and recompiling apks. It just takes time to tweak and modify everything. Google and xda are your best friends, you can find the answer to just about anything you want.
Click to expand...
Click to collapse
yes you can flash it which suitable for your device
---------- Post added at 07:12 AM ---------- Previous post was at 07:07 AM ----------
[email protected] said:
yes you can flash it which suitable for your device
Click to expand...
Click to collapse
I have sync Evervolv source code and I'll make this days
Thank you guys for your responses. I appreciate you taking the time.
nschiwy, I'm still working my way through the thread you provided, hopefully something there will help.
This isn't another one of those 'can somebody port Sense' threads.
Please note that this thread is for developer-oriented discussion. If you don't have anything to say to help development, please refrain from posting here.
Also note that ideas are welcome. Just check if the idea you're about to post has already been posted by somebody else.
Right now, it's just multiple people working on this. No team, just individuals.
As of the last edit of this post, there has been little to no progress:
I'm constantly working on builds. The current, and the only goal I'll be striving towards as of now is using a T-Mo HTC One X ROM in combination with RaymanFX's CM10.1 RC2 build.
XDA RC @abcdjdj has reported that he has fixed a lot of errors in his build, and is now stuck at the bootanimation. If you can help him in any way, here is what's wrong with his build. He's using FXP's CM9 as a base and a 4.0 HTC One X with Sense 4 ROM as a port.
The OP will constantly be updated with any progress anyone makes.
We're currently using this XDA thread to help us port the ROM.
--------------------------------
Here's everything I have to share on my build:
PORT: HTC One X, T-Mobile Edition| Android 4.2.2
BASE: Sony Xperia S, nozomi | Android 4.2.2
------------------------
ITesters needed. If you can work through adb commands and can provide me with logcats, please leave a post about it in the thread.
And finally, a note to anyone that may be cursing me for working so very slow (because I admit, this is very slow):
Please understand that all this isn't easy for me. I have painfully slow internet, making each download at least one hour, and thus a pain. My time on this project is limited every day, so progress is slow.
Reserved.
someone755 said:
Okay, so this is the work that has already been done and some of the mysteries that puzzle me right now:
I've edited the CM9 kernel's ramdisk, like stated in the tutorial I'm using (see post 1). As of now, the kernel itself is broken and even if the ROM was complete, not even the booting would work. (Well, booting works as far as showing the boot logo (the green FXP one) goes. But the LED notification light for entering recovery doesn't light. Bootloop over and over...)
Many of the lib files intended to be copied from one lib folder to the other are missing on our Nozomis... My question is, what are the consequences...?
My main issue here is that the zip won't flash. The recovery (no matter which I choose) just returns an 'ERROR' and refuses to flash the file...
Another question would be how to repack an .elf kernel into a boot.img. Because now, I'm trying with letting the CM9 kernel in the zip (since it is an .img) and then flash the modified .elf kernel that I repacked with Flashtool. Inefficient, but at least there's a way.
So currently, the priority list would be:
1.Get zip to flash
2.Fix kernel
...Not necessarily in that order. We could fix the kernel first, but there isn't much gain to it if the ROM zip can't even be flashed to test if it truly works...
Click to expand...
Click to collapse
Bro, it may be possible to get Sense on our devices. Even I have been working on getting Sense booted on our device. My status:-
PORTED FROM - HTC ONE X
BASE - FXP 215 CM9
STATUS - Gets past kernel and even loads bootanimation. Fixed many errors in the logcat. Gets stuck at bootanimation and even displays a message saying that System is not responding, would you like to close it.
I couldn't manage to fix any more errors in the logcat so I gave up but you have rekindled my spirit to get Sense booting on out device. I will upload my rom soon along with the logcat.
Cheers,
abcdjdj
Wow, you actually got the thing to boot?
The only question is how did you manage that based off of a tegra CPU? Would be very interested in seeing that...
On a not-so-very related note, your port was of ICS and Sense 4 , correct?
Am I the only one around here that favors old software?
someone755 said:
Wow, you actually got the thing to boot?
The only question is how did you manage that based off of a tegra CPU? Would be very interested in seeing that...
On a not-so-very related note, your port was of ICS and Sense 4 , correct?
Am I the only one around here that favors old software?
Click to expand...
Click to collapse
Not fully booting but I think close to booting. I followed the guide mentioned by you in the OP and one by one eliminated all errors that I could eliminate. I had been working on Sense for around a month during my school holidays but now I am not getting any free time. And yes it is Sense 4 (Android 4.0.4).
Sent from my LT26i using xda app-developers app
But isn't the Tegra3 completely different than our FUJI board?
Especially the graphics, those must be out of control on your ROM...
If I were you, I'd at least take the AT&T version of the HOX.
Oh yeah, I forgot to ask: is it the same if I try and port from a MSM8260 board (the same as the Xperia) and the later S4 Qualcomm versions (used in the Xperia T, AT&T One X etc.)? Because porting from a CDMA phone (HTC Rezound) seems to make the work harder...
Thankfully, my summer holidays have just begun, so I have plenty of free time (that's also the reason I started my project).
P.S.
Yeah, maybe that's exactly what I should do. Ditch the CDMA phone and start with the Snapdragon S4 One X!
I would prefer Sense 3.x, but oh well, at least Sense4 is also Sense
http://www.xda-developers.com/android/sense-4-ported-to-sony-xperia-devices/
I just found this. It's not even that old...
Anyways, I've been thinking if the devs of this would be able to help us.
This development stuff gets boring pretty quick when you do it for the 10th time
@samuel2706, could you give these guys a little hand?
But he's a HTC Dev... Wouldn't we need something more like a nexus or better yet a Xperia developer?
someone755 said:
But he's a HTC Dev... Wouldn't we need something more like a nexus or better yet a Xperia developer?
Click to expand...
Click to collapse
Yes,, maybe, but he also could give a little help. Can't he?
Sent From my LT26i using Tapatalk 4
Contact the guy who did this http://forum.xda-developers.com/showthread.php?t=2184706
Well, I thought I'd make this thread so that devs could help each other to actually work together and create a working Sense ROM. So naturally, all help is welcome from anyone.
Anyways, I'm on my way to finishing yet another try, this time with the AT&T One X. Fingers crossed that it at least makes it to the bootanimation.
EDIT: I see that the easiest way to get Gapps is with including the default /data folder from the original HTC ROM (with vending, youtube etc.). But I have to add that to the updater-script. So, I want to ask, is /dev/block/mmcblk0p14 the data partition on the Nozomi?
What's happening?
samuel2706 said:
What's happening?
Click to expand...
Click to collapse
Hi,
I am porting [or trying to port] Sense 4 from HTC One X to Xperia S. I used FXP 214 CM9 as a base. I followed this guide - http://forum.xda-developers.com/showthread.php?t=2245786
Then I fixed as many errors as I could by checking the logcat and got it till the Bootanimation. But now I need help to get it to boot. So, I have attached the logcat from my latest build.
Thanks for your help,
abcdjdj
Maybe copying a few more files could help. Maybe act like your xperia is a HTC device? http://forum.xda-developers.com/showthread.php?t=1222746
Could be worth a try and play with this copying a bit...
Seems to be failing at dalvik; very strange, it doesn't show any major errors on first glance however I'll take a longer look at when I can, however I can link you to this thread that may help you in the meantime Porting
What about this one? http://forum.xda-developers.com/showthread.php?t=2276871
Nice and automated, but the question is, will it work?
I'm trying it with the HOX, just need to wait for it to copy to the phone...
All this seems like a big race -- who will get it working first? Hyped!
Kinda makes me wish I still had my xperia S I could have given this a real good go at; but instead I have a galaxy s4, so it's going to be mostly logcats and such I can help with, I don't like blind building things; made that mistake before.
A blind build is better than no build. Unless it makes bricks...
Thanks a lot for helping out.
Though I'll never understand how a pro HTC dev can go to Sony and then Samsung. ;P
I just hope THIS time my kernel will boot... Cause if it doesn't ... [censored]...
EDIT: Okay, [censored] is happening... Why can't I make this zip flash? I've done it a million times, but all I get is ERROR... ;-;
unfotunatly, i'm not a dev. but i really like the idea. specially if considering porting htc one sense version to our nozomi. i think it would fit like a glove
yes i am ask for someone to port cm 10.2 for for galaxy tab 3 7.0 smt210r i would like to try it out if somebody can port it thanks let me know if u can
Jaykingis20 said:
yes i am ask for someone to port cm 10.2 for for galaxy tab 3 7.0 smt210r i would like to try it out if somebody can port it thanks let me know if u can
Click to expand...
Click to collapse
i think cm10.1 is the one to do unless i'm getting my versions mixed up,
cm10.2 is android 4.3 and that had problems.
cm10.1 is android 4.2 and should be an easy match i think.
wanting the latest version of whatever is not always best.
and i mean this in the best way, xda is not a shopping mall it's a developers site.
requests are a reasonable thing to expect. progressively flooding the forums with useless
threads/posts is not reasonable. rather than ask for someone else to do for you, take the time
to learn so you can do for yourself. i started in may and since then i have learned a lot.
all i ask is that you consider that.
m
alright
moonbutt74 said:
i think cm10.1 is the one to do unless i'm getting my versions mixed up,
cm10.2 is android 4.3 and that had problems.
cm10.1 is android 4.2 and should be an easy match i think.
wanting the latest version of whatever is not always best.
and i mean this in the best way, xda is not a shopping mall it's a developers site.
requests are a reasonable thing to expect. progressively flooding the forums with useless
threads/posts is not reasonable. rather than ask for someone else to do for you, take the time
to learn so you can do for yourself. i started in may and since then i have learned a lot.
all i ask is that you consider that.
m
Click to expand...
Click to collapse
where do i start and how to do this it would be fun for me to learn to do this kind of stuff also where do i download to like port roms make roms ect so where do i start i want to learn how to make my first rom
Jaykingis20 said:
where do i start and how to do this it would be fun for me to learn to do this kind of stuff also where do i download to like port roms make roms ect so where do i start i want to learn how to make my first rom
Click to expand...
Click to collapse
you start by using the xda search bar.
search terms such as how to compile a kernel, how to build a rom, etc.
and read, read, read.
you will also need a linux 64bit pc for rom building.
you can use a linux 32bit pc for kernel building which is where i started.
as a sort of quick link to find the threads in which i began my learning process
click on my username and select view posts option, it will show you every post i've made.
pay particular attention to the discussions between myself and Restl3ss as he completely guided me
through the process to getting my cm11 build environment set up. there is a huge deal of excellent noob-friendly
info in there.
good luck :good:
m
moonbutt74 said:
you start by using the xda search bar.
search terms such as how to compile a kernel, how to build a rom, etc.
and read, read, read.
you will also need a linux 64bit pc for rom building.
you can use a linux 32bit pc for kernel building which is where i started.
as a sort of quick link to find the threads in which i began my learning process
click on my username and select view posts option, it will show you every post i've made.
pay particular attention to the discussions between myself and Restl3ss as he completely guided me
through the process to getting my cm11 build environment set up. there is a huge deal of excellent noob-friendly
info in there.
good luck :good:
m
Click to expand...
Click to collapse
alright i have windows but not linux i need to download linux for my windows vista so i can get started
on Linux
Jaykingis20 said:
alright i have windows but not linux i need to download linux for my windows vista so i can get started
Click to expand...
Click to collapse
you will need to search the internet for instruction on installing Linux.
again, read read read.
As a recommendation search for Debian Linux or Linux Mint.
That is outside the scope of this discussion however. When you have completed that then return
to XDA to continue your quest.
m
So ... I'd like to dual boot a normal linux on that tab.
My first problem is something like a boot loader that let me select wether to boot android or any other system (with touch capability and timeout ideally).
Some googling around didn't bring anything useful besides "it's highly dependent on the device".
Is there something like that out there? The alternative I thought of is to build something like the Ubuntu Phone boot app, but I have no idea how it works.
The next problem would be hardware support, but I will look at that issue later.
The chroot solution would be a fallback (I have to look deeper into, especially in terms of performance), but I'd prefer to have a real system.
hofmann.christian said:
So ... I'd like to dual boot a normal linux on that tab.
My first problem is something like a boot loader that let me select wether to boot android or any other system (with touch capability and timeout ideally).
Some googling around didn't bring anything useful besides "it's highly dependent on the device".
Is there something like that out there? The alternative I thought of is to build something like the Ubuntu Phone boot app, but I have no idea how it works.
The next problem would be hardware support, but I will look at that issue later.
The chroot solution would be a fallback (I have to look deeper into, especially in terms of performance), but I'd prefer to have a real system.
Click to expand...
Click to collapse
Just to clarify which exact tab s fo you have, you say also you will look into the issue of hardware support later....this is the wrong order im sorry to say and many people will agree its the first thing u shud look at.....for example it has to be taken into account that your using an arm processor and u cant just use any linux distro on any arm processor e.g arm v5 is different architecture to armv7...meaning a new kernal needed that runs your linux and android...you really are going into waters way above even my head...start with porting cynogenmod completely from scratch...look st compiling your first real rom and you will learn A LOT and MAY begin to comprehend what your asking here....not meaning to sound god almighty but honestly this involves a lot of factors.
Well, I am aiming at arch and afaik there should be ARM versions for any relevant CPUs, so this is not that a big deal. GPU and the likes could be way worse.
Also: 8.4", not sure if there are different versions of these besides the storage capacity
hofmann.christian said:
Well, I am aiming at arch and afaik there should be ARM versions for any relevant CPUs, so this is not that a big deal. GPU and the likes could be way worse.
Also: 8.4", not sure if there are different versions of these besides the storage capacity
Click to expand...
Click to collapse
Ok pal all you need to do then is create a kernal that will support both the android 4.4.2 and linux that youve custom built and taylored to your phones specs.
Heres a link to expanded info on linux and arm: http://www.reddit.com/r/linux/comments/2n21i2/can_arm_chip_linux_servers_run_all_software_or/
Heres a link to building kernals : https://source.android.com/source/building-kernels.html
And heres a link to your specs something you WILL need : http://m.gsmarena.com/samsung_galaxy_tab_s_8_4_lte-6435.php
Please keep me updated on this as if you put all the effort in needed then it would a nice self achievement...good luck m8.
pdolton2000 said:
Ok pal all you need to do then is create a kernal that will support both the android 4.4.2 and linux that youve custom built and taylored to your phones specs.
Click to expand...
Click to collapse
I thought about that, too. But that may be especially hard on arch due to regular updates. It still may be possible and I will have a look at it, but I'd prefer multiple kernels to choose from.
Also: Does having one single kernel in any way help with the boot choice problem?
hofmann.christian said:
I thought about that, too. But that may be especially hard on arch due to regular updates. It still may be possible and I will have a look at it, but I'd prefer multiple kernels to choose from.
Also: Does having one single kernel in any way help with the boot choice problem?
Click to expand...
Click to collapse
Well without one single kernal you cant boot anything...why go though making a bootloader to something when youve got nothing to boot yet? The bootloader is the easiest part its the rest thats the harder. Heres an example of bootloaders that shows its more than possible.
https://play.google.com/store/apps/...droid&pcampaignid=APPU_3DrCVJj1A8vW7AaIu4HQDQ
And the designer is a member of XDA so i say again you first need to build kernal and linux that are compatible with your hardware....then contact this bloke who made MultiBoot and when he sees all the hard work you put in he will be more than happy to help you i should imagine.
---------- Post added at 12:26 PM ---------- Previous post was at 12:18 PM ----------
pdolton2000 said:
Well without one single kernal you cant boot anything...why go though making a bootloader to something when youve got nothing to boot yet? The bootloader is the easiest part its the rest thats the harder. Heres an example of bootloaders that shows its more than possible.
https://play.google.com/store/apps/...droid&pcampaignid=APPU_3DrCVJj1A8vW7AaIu4HQDQ
And the designer is a member of XDA so i say again you first need to build kernal and linux that are compatible with your hardware....then contact this bloke who made MultiBoot and when he sees all the hard work you put in he will be more than happy to help you i should imagine.
Click to expand...
Click to collapse
EDIT
If you wanted a quick way out of all that i can only suggest emulating linux on android...find an example here:
https://play.google.com/store/apps/...droid&pcampaignid=APPU_FT3CVObxNIOa7gbxwYDACg
Good luck anyway pal hope it goes to plan
It looks exactly like what I need. The screenshots are suggesting that regular linux distributions are running as well.
If this would be compatible with this device I'd stuff ALARM with an sshd on it and work my way from there.
hofmann.christian said:
It looks exactly like what I need. The screenshots are suggesting that regular linux distributions are running as well.
If this would be compatible with this device I'd stuff ALARM with an sshd on it and work my way from there.
Click to expand...
Click to collapse
Haaa whats the chances, i only thought of that last minute, hope it works out man
pdolton2000 said:
Haaa whats the chances, i only thought of that last minute, hope it works out man
Click to expand...
Click to collapse
Well, so I am back at the "I need a boot manager" square just with the information that there is something like this which just doesn't work for now.
hofmann.christian said:
Well, so I am back at the "I need a boot manager" square just with the information that there is something like this which just doesn't work for now.
Click to expand...
Click to collapse
Sorry pal you want a boot manager to run this emulated version of linux? This works by emulating it inside android os? Or have i misunderstood?
pdolton2000 said:
Sorry pal you want a boot manager to run this emulated version of linux? This works by emulating it inside android os? Or have i misunderstood?
Click to expand...
Click to collapse
Who said something about an emulated Version? I want a real full fledged Linux to dual boot on a tablet.
hofmann.christian said:
It looks exactly like what I need. The screenshots are suggesting that regular linux distributions are running as well.
If this would be compatible with this device I'd stuff ALARM with an sshd on it and work my way from there.
Click to expand...
Click to collapse
Misunderstanding thought you were refuring to the edit i made just above this post im quoting in its original place.
Ok so you now no the idea of bootloaders exist and for them to work you need linux and a kernal ie an os otherwise theres nothing for it to boot, you need to compile a compatible kernal and lixux distro together thats going to work with your spec so then someone else can help you with the bootloader that will dual bot both it and android...otherwise your asking somebody to draw a design of a building and predict the levels of the foundations before the land itself exists which cannot be done.
Ive provided you research material in kernal design, the specs of your phone, about how linux and arm work together, ive provided you with a link to a bootloader exactly like what your after made by a member on xda whom u can see links to in the download of it to show that you have a place and a person to ask who specializes in the field once youve created what you want to dual boot with android.
Theres nothing more that can be done pal its all been made very clear.
Good day XDA!! This is my first ever post or thread on XDA, for about 5 years I have been a spectator to this site, and it has been an essential source for all things us android foondies want and need. But for the past month I have hit a blank when it comes to my new tab3 ve 7.0 sm-t116nq (goyave3g).
It started when I wanted to root it, little to no support for this model was available (at least through the search function) I managed to root through Kingo root on a pc. But now my dilemma is finding/porting rooms for this model. I have no problem with all my Mediatek androids, but I'm in the dark when it comes to samsung. I don't even know where to begin, for other popular Samsung's it's not a problem, obviously because they're popular.
SO, I need some help. I hate this abomination they call touchwiz, I want a vanilla aosp rom for this model, or even better CM or PAC-MAN rom!! I am prepaid to put a lot of time and effort into this. I have extremely limited experience, most of my past successes was actually the success of other xda members (you guys are awesome BTW.) Any info would be apriciated.
So let's revive this tablet and let's start a revolution for budget tablets.
Dudzzz576 said:
Good day XDA!! This is my first ever post or thread on XDA, for about 5 years I have been a spectator to this site, and it has been an essential source for all things us android foondies want and need. But for the past month I have hit a blank when it comes to my new tab3 ve 7.0 sm-t116nq (goyave3g).
It started when I wanted to root it, little to no support for this model was available (at least through the search function) I managed to root through Kingo root on a pc. But now my dilemma is finding/porting rooms for this model. I have no problem with all my Mediatek androids, but I'm in the dark when it comes to samsung. I don't even know where to begin, for other popular Samsung's it's not a problem, obviously because they're popular.
SO, I need some help. I hate this abomination they call touchwiz, I want a vanilla aosp rom for this model, or even better CM or PAC-MAN rom!! I am prepaid to put a lot of time and effort into this. I have extremely limited experience, most of my past successes was actually the success of other xda members (you guys are awesome BTW.) Any info would be apriciated.
So let's revive this tablet and let's start a revolution for budget tablets.
Click to expand...
Click to collapse
good news,i'm currently developing cm for this tab it might take a while depending on the device itself
Thunderoar said:
good news,i'm currently developing cm for this tab it might take a while depending on the device itself
Click to expand...
Click to collapse
Oh, such a good news, but tell me, will your cm support sm-t113 too bro?
x3m_zion said:
Oh, such a good news, but tell me, will your cm support sm-t113 too bro?
Click to expand...
Click to collapse
dont know, still testing
Thunderoar said:
good news,i'm currently developing cm for this tab it might take a while depending on the device itself
Click to expand...
Click to collapse
How is it going? Any news for us?
danny02 said:
How is it going? Any news for us?
Click to expand...
Click to collapse
i decided to suspend the project because of school though
Estamos presos no Android 4.4.4 =/
Maldito SM-T116BU
But is not there anyone interested in developing a rom with Lollipop for the SM t116? Hardware the device has, a Galaxy J1 mini has almost the same processed and less than 1gb of ram and it runs the Lollipop well
mmacedoc7 said:
But is not there anyone interested in developing a rom with Lollipop for the SM t116? Hardware the device has, a Galaxy J1 mini has almost the same processed and less than 1gb of ram and it runs the Lollipop well
Click to expand...
Click to collapse
hi! you can read here https://forum.xda-developers.com/galaxy-tab-3/development-7/rom-tab-3-lite-sm-t116-goyave-t3537793
pit file
Can anyone help me find pit file for galaxy sm-t116NU??????
OMG, Im also stuck here with SM-T116BU which was officially upgraded to Tab E (somehow) how it happened, i don't know since this was my son's Tab 3v originally.
lately. i have rooted tru inception (nice job for the rooting guys) then tried TWRP 3.1.1.0 but couldnt boot, down ver to TWRP 2.8.7.0 bcos the others are either not TAR for odin or files are missing to boot TWRP recovery.
so far, i have tried CM-13 but failed miserably, perhaps those files are corrupted as well
I enjoyed loading with my "Note3 with touchwiz" DO NOT TRY THIS UNLESS YOU KNOW HOW TO RECOVER, so i tried using the same ROM N9005_TouchWizMM_V4_16-04-2016. installation smoothly with TWRP into TAB E but could NOT make it BOOT.
I guess some files are missing while downloading those as well or those files have been corrupted thru the years.
N9005_TouchWizMM_V4_16-04-2016 not difficult to find but NEED an expert to cook a SM-116 version since this is best "complete" ROM (need kernel) in my Note3 now
I'll keep trying ROM N9005_TouchWizMM_V4_16-04-2016 into THIS TAB E and mixed with SM_116 kernels n I KNOW I MIGHT BRICK THIS SM-116 Tab E, what the HACK so let it be, NO VENTURE NO GAIN hahahaaa
deranche said:
OMG, Im also stuck here with SM-T116BU which was officially upgraded to Tab E (somehow) how it happened, i don't know since this was my son's Tab 3v originally.
lately. i have rooted tru inception (nice job for the rooting guys) then tried TWRP 3.1.1.0 but couldnt boot, down ver to TWRP 2.8.7.0 bcos the others are either not TAR for odin or files are missing to boot TWRP recovery.
so far, i have tried CM-13 but failed miserably, perhaps those files are corrupted as well
I enjoyed loading with my "Note3 with touchwiz" DO NOT TRY THIS UNLESS YOU KNOW HOW TO RECOVER, so i tried using the same ROM N9005_TouchWizMM_V4_16-04-2016. installation smoothly with TWRP into TAB E but could NOT make it BOOT.
I guess some files are missing while downloading those as well or those files have been corrupted thru the years.
N9005_TouchWizMM_V4_16-04-2016 not difficult to find but NEED an expert to cook a SM-116 version since this is best "complete" ROM (need kernel) in my Note3 now
I'll keep trying ROM N9005_TouchWizMM_V4_16-04-2016 into THIS TAB E and mixed with SM_116 kernels n I KNOW I MIGHT BRICK THIS SM-116 Tab E, what the HACK so let it be, NO VENTURE NO GAIN hahahaaa
Click to expand...
Click to collapse
What exactly are you trying to do?
Well. The TouchWiz works perfectly on my note3 so I'll try to cook a TouchWiz for Sm-t116 from the note3 platform. If u have ready ROM, do send them. Tks in advance !
Ps. Out of town next few days ??
deranche said:
Well. The TouchWiz works perfectly on my note3 so I'll try to cook a TouchWiz for Sm-t116 from the note3 platform. If u have ready ROM, do send them. Tks in advance !
Ps. Out of town next few days
Click to expand...
Click to collapse
Guys please give the firmware rom for TVRP on the TAB-3 Lite SM-T116 ! Cause when I for some reason flashed TVPP I realized that there are no custom firmwares for this device , But I need 100% working FI-WI, and cyanogen mod does not fit, cause Wi-Fi doesn't work there!