Related
I have searched the internet high and low - found many threads in many forums about the O2 XDA IIs being stuck on boot screen and wont hard reset and NO, I mean NOT a single solution posted anywhere despite the numbers of people with exactly the same problem as me.
It will enter boot loader mode and will flash with WM5 or 6 but neither have working camera or sound.
I have flashed it with Ship versions of O2 and even T-Mobile roms but both freeze at the boot screen and wont do anything else, pressing the usual buttons to get it to hard reset don't work.
So unless anyone can help me either restore the factory rom and solve the frozen boot screen or fix the sound / camera I am going to smash it to little pieces and throw it in the bin.
arcnet said:
So unless anyone can help me either restore the factory rom and solve the frozen boot screen or fix the sound / camera I am going to smash it to little pieces and throw it in the bin.
Click to expand...
Click to collapse
Don't do that, tell me the cost and post it to me. I can use the spare parts.
Seriously, what have you tried so far? (I missed the earlier posts).
Are you getting stuck at the four colour boot screen, or at the WM splash screen?
Thanks for the reply Jdc - lol - for a second I thought you were serious about the parts.
I have tried sooo much with this thing I cant remember what I haven't tried now. But to recap when I first got the Xda IIs it was locked to O2 and stuck on the boot screen with the O2 logo and the red writing in bottom left corner showing rom version. Nothing seems to shift from this state, no reset hard or soft makes any difference - take out the battery and when put back in and powered up sticks at the boot screen.
However - I can get it into bootloader mode and merrily flash WM5 or 6 which appear to work perfectly but there is no sound whatsoever and the camera says it fails to initialize the hardware please reset.
I then reflashed it with an O2 stock Ship rom - presumably WM2003 and it is exactly as it was at the start - stuck on the boot screen showing the O2 logo and rom versions.
I even tried a T-Mobile ship rom of the same version and it stuck on the T mobile boot screen.
Arrrgh!!!! I am at my wits end with it - maybe it is faulty somehow and this is not a software fault - I wish there was some diagnostic I could run on it and find out.
I currently have WM6.11 running well but as I said with no sound or camera.
Hope you can suggest something I may have overlooked or done wrong - I am new to this and it is very possible I have missed something.
arcnet said:
Thanks for the reply Jdc - lol - for a second I thought you were serious about the parts.
Click to expand...
Click to collapse
Well, I am, kind of. I have an XDA IIs as well that needs some replacement parts, so if you are going to smash the thing, I'll pay the post to send it my way.
Anyway...
arcnet said:
I have tried sooo much with this thing I cant remember what I haven't tried now. But to recap when I first got the Xda IIs it was locked to O2 and stuck on the boot screen with the O2 logo and the red writing in bottom left corner showing rom version. Nothing seems to shift from this state, no reset hard or soft makes any difference - take out the battery and when put back in and powered up sticks at the boot screen.
Click to expand...
Click to collapse
Hrm...
When it is stuck the boot screen, what does the R, G and D lines show? I'm wondering if the radio ROM might be buggered up. However, you do say that it's working... mostly...
arcnet said:
However - I can get it into bootloader mode and merrily flash WM5 or 6 which appear to work perfectly but there is no sound whatsoever and the camera says it fails to initialize the hardware please reset.
Click to expand...
Click to collapse
No sound... As in playing a sound file with WMP doesn't even produce anything?
Can you use it as a phone normally?
Have you opened it up to see if the camera and speaker(s) are loose?
One other thing to try, if you don't mind doing another hard reset:
1. Download mtty v1.42
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete) kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run mtty (from downloaded) Choose WCEUSBSH001 (If you only see COM 1 and COM 2, try unplugging the USB and replugging it)
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
The wierdest thing happened.
Have to say that none of the suggestions or ideas (though welcome) helped. I reflashed the WM6.1 after flashing latest radio rom. Still no sound and camera.
Last night I had kept the battery out for a few hours and then on replacing it had to do reset - hey presto after all this time the sound worked and so does the camera.???? I have absolutely no idea what I did to fix it - almost as if it needed resetting a few times - cant think what else I have done.
Anyway I am happy bunny now - it all seems to be working perfectly.
Excellent! Glad that it's working for you now, hopefully it stays working as well.
If it doesn't, don't bin it, PM me and we can talk.
Lol - sorry Jdc but i wont be parting with it now - it all works perfectly even the phone is superb now which just goes to show that even when it looks like a hardware fault it is often software - a typical PC in other words.
Cheers
arcnet said:
Lol - sorry Jdc but i wont be parting with it now
Click to expand...
Click to collapse
Well bugger. No worries, glad it's working for you.
arcnet said:
it all works perfectly even the phone is superb now which just goes to show that even when it looks like a hardware fault it is often software - a typical PC in other words.
Cheers
Click to expand...
Click to collapse
Well, a typical windows machine. My UNIX and Mac's rarely go and burble to themselves like my windows machines do at times.
Disclaimer:
I have the same problem this guy have:
http://forum.xda-developers.com/showthread.php?t=1036327
But no one in the thread was able to understand him, so I'm trying to open a new thread to organize the thoughts (there are too many people with too many problems posting there).
What happened:
I have a 1-month-old Defy. On the 2nd day I already had it rooted, running froyo (with Pays ROM), overclocked, undervolted and all this stuff. Three days ago, suddenly, it started to FC apps randomly. So I wiped. Then it became stuck on M logo. No big deal.
I tried then to reflash the SBF via RSDLite, but for some reason I only had the previous SBF (3.4.2-155-2) and my phone was running on 3.4.3-11. Don't know if it has downgradeability issues, but I couldn't flash it. It threw some checksum errors in the process and wasn't able to finish the process. Then my phone became "Code Corrupt". I was still able to see it in RSDLite. No big deal.
I didn't know the battery wouldn't charge in the bootloader screen, so I quickly ran into a "Battery Low / Cannot Program" state. It was written in the screen what happened. I knew what I had to do. No big deal.
I read about the MacGyver method, but prefered instead to use a universal charger to charge my battery. Was charging all night, seem to work on other defy (tested it later). But, now, my phone makes no response to battery insertion. Not even power+vol up, nothing. No white led, no bootloader, no code corrupt, no nothing. Ok, that's a big deal.
If I connect it to USB, nothing happens. No driver instalation, no device recognized, no RSDLite, no bootloader, no white led. Nothing.
The only response I have from the phone is: if I pull the battery and put it again while connected to USB, the computer will make an USB connection sound, then 2 seconds later, it makes an USB disconnection sound. If I open the device manager, it shows the Motorola Device for 2 seconds (OMAP something) and then it desapears. So I'm not able to see it in RSDLite.
I tried even to power up the phone with the MacGyver-crafted USB cable (with and without battery inserted together), but the computer response is the same. That is the only thing that makes me believe that my Defy isn't entirely dead. But isn't much useful after all.
Hope I explained it well. I'm one of those guys who doesn't speak english well, so I hope you guys understand me . Thanks in advance.
I would really like to be helpful, but it looks, that you tried everything. Only one thing. Try to check the battery voltage and if you can, try another battery in your phone. The charger could broke your battery, even if it one time worked in another phone.
Try reinstall usb drivers, rsdlite, different usb port, and different pc.
@peetr_
The battery seems to still work, as putting it in the phone makes it to be recognized (for 2 seconds) on the PC. Also, the phone seems to get a little warm while with the battery.
@ABC_Universal
I tried. Installed all the drivers in another PC I have here and tried the same methods I said before. Same results.
If you're planning to dumb the phone into a dumb site.. let me know when and where...
Ok... you need to narrow down the possibility here by putting another full charged battery and see if the phone do get connected status via PC. External charger might just toast your battery if you read carefully your entire story back starting from this line "I didn't know the battery wouldn't charge in the bootloader screen, so I quickly ran into a "Battery Low / Cannot Program" state. It was written in the screen what happened. I knew what I had to do. No big deal."
External charger might giving out totally different voltage/current rating from the defy own charger.
im having the same issue, did you solve it?
im having the same issue, did you solve it?
try putting a different Defy's battery, doesn't work just give it for RMA... you'll get a replacement. looks like a hardware problem to me...
You have tried the McGyver-trick?
I tried using another battery in it and didn't work. I was far from a computer when I tried, so I didn't check if I was able to connect it to PC (even if the screen was totally black). But if it was a battery problem, I was expecting at least the bootloader to appear, but still nothing happened.
I took it to RMA two weeks ago. Here in Brazil they take too long to return it =/. Still waiting.
skattegat: I tried. With and without battery inserted together. Both cases, I was only able to listen the USB connection start and end, 2 seconds later. I know the cable was working because even without battery, when I touch the wires, I was able to listen the usb connection sound.
Ok. At least you have the time now to enjoy your sunny weather in Brazil...
RSD lite sucks... Well it doesn't suck but it refuses to work anymore no matter what I do!
Use sbf_flash in linux and it should do the trick! PM me if you need help
First flash the sbf. Then enter stock recovery and do the recovery from there. Flashing does not wipe cache. But after the flash the recovery will do the wipe automaticly.
Sent from my MB525 cm7quarx
Just a follow up:
My phone returned today from the warranty. Is fully working now, but I noticed the IMEI has changed. So I guess they changed the entire circuit.
It's not helpful for those who have the same problem, but I'm happy again
i have problem too..
I made a mistake in ROM CM7: I "install the 2nd init". and the results stuck on the boot logo .. : (
I finally went into the boot loader, then flash again use 3.4.2_177 SBF-005_NORDIC (do not wipe the data) .. remain stuck at the boot logo. and I try to use flash SBF-Stock.UKTmobile 3.4.3_11 (not wipe the data) and the results .... still stuck>> it's just an animated logo appears only.
AND THEN ---------------------------------
for this case:
I want to get into stock recovery:
1. defy turn off, turn the power button + volume down (hold a while)
2. logo appears>> android +! (the menu does not appear anything)
3. and I do not know anymore what should I do: (
please help me Quarx
thanks before
Don't see why you should ask the same question in multiple topics. My answer still is the same:
If pushing the lower right corner doesn't do the trick, try instead pushing both volume buttons at the same moment. Worked for me
Sent from my MB525 using XDA App
Fotogravin said:
Don't see why you should ask the same question in multiple topics. My answer still is the same:
If pushing the lower right corner doesn't do the trick, try instead pushing both volume buttons at the same moment. Worked for me
Sent from my MB525 using XDA App
Click to expand...
Click to collapse
it's work..!! sorry i ask same question on other thread.
i'm so confuse
makasih gan
hey omneon are you able to solve your problem..plz help me man mine defy is stuck on m logo. same problem like your..
I believe im having the "5 second bootloop" problem, no idea why since my KF was never rooted, flashed, or modified in any way. I plugged the Micro B in the KF (KF was off) and then plugged the Type-A end into my PC, the KF turned on in like 10 seconds (maybe less) and it isn't doing the bootloop anymore which i guess is a good thing but its been like 10 minutes and it still just says kindle fire (with a green light on the bottom). What should I do from here for my specific situation? Any help would be great! Thanks in advance!
edit: just wanted to add that before when i would plug it in, it would keep rebooting and usually not even get to the slide to unlock screen, but sometimes it would and then instantly reboot again.
First off...what bootloader do you have installed?
How could I find out? I never modified it if that helps? So it should be stock everything.
also i downloaded KFU and installed the drivers, but it does not recognize my device, altho when i first plugged it in after installing the drivers it said kindle in Device Manager, since it didnt go anywhere i unplugged the kindle and turned it off, when i tried again it installed ADB, but still doesnt recognize it (it also prompted me to restart, which i did right before i posted this reply, and still not recognized, also still at the kindle fire screen with green light on)
Untraumatized said:
How could I find out? I never modified it if that helps? So it should be stock everything.
also i downloaded KFU and installed the drivers, but it does not recognize my device, altho when i first plugged it in after installing the drivers it said kindle in Device Manager, since it didnt go anywhere i unplugged the kindle and turned it off, when i tried again it installed ADB, but still doesnt recognize it (it also prompted me to restart, which i did right before i posted this reply, and still not recognized, also still at the kindle fire screen with green light on)
Click to expand...
Click to collapse
ok so i read that sometimes it just wont read that it worked... so i check device manager, it said android phone, went to KFU, still said unknown after 0+enter, then i tried 3, it said it worked and to press any key to reboot, i pressed a key but the kindle didnt reboot, is it supposed to? also i tried 4 then like i read to do and it says the download path is incorrect so whats wrong?
Untraumatized said:
ok so i read that sometimes it just wont read that it worked... so i check device manager, it said android phone, went to KFU, still said unknown after 0+enter, then i tried 3, it said it worked and to press any key to reboot, i pressed a key but the kindle didnt reboot, is it supposed to? also i tried 4 then like i read to do and it says the download path is incorrect so whats wrong?
Click to expand...
Click to collapse
sorry for triple posting i will fix it but i dont want to confuse you on the timing of these events lol... so i figured out that CWM may be broken right now??? anyways since twrp worked i insatlled FFF with worked and now its at a menu that is kindle fire but BLUE fire text and says press power button for boot menu, but when i do that it doesnt do anything, do i need to unplug it?
Untraumatized said:
sorry for triple posting i will fix it but i dont want to confuse you on the timing of these events lol... so i figured out that CWM may be broken right now??? anyways since twrp worked i insatlled FFF with worked and now its at a menu that is kindle fire but BLUE fire text and says press power button for boot menu, but when i do that it doesnt do anything, do i need to unplug it?
Click to expand...
Click to collapse
you still there buddy? lol, i unplugged it and ya that worked, so now im at TWRP, just because it seems like a good idea i am backing up the things that were already checkmarked when i clicked backup
but now im afraid to continue without help, what step am i at exactly now? lol
EDIT: stuck at the end of the backup, been stuck there a while, will probably try to turn it off in a few minutes or so... anybody have some advice?
How about a little more information about what it is you intend to accomplish with your device?
soupmagnet said:
How about a little more information about what it is you intend to accomplish with your device?
Click to expand...
Click to collapse
i just want it to work! my power went out one day while i was sleeping and it was charging, for some reason it was dead (had been at 100% so shouldnt have drained, but the power going out messed with it) and when i tried to charge it, it bootloops
right now i have TWRP installed and FFF installed, what should i do now? i have tried booting it up and it just gets to the slide to unlock screen and then resets back to the blue kindle fire screen
i also just tried to install permanent root with superuser and it seemed to be working then said rebooting and "please wait...." and it never did anything (except the kindle booted back to the blue kind fire screen)
Untraumatized said:
i just want it to work! my power went out one day while i was sleeping and it was charging, for some reason it was dead (had been at 100% so shouldnt have drained, but the power going out messed with it) and when i tried to charge it, it bootloops
right now i have TWRP installed and FFF installed, what should i do now? i have tried booting it up and it just gets to the slide to unlock screen and then resets back to the blue kindle fire screen
i also just tried to install permanent root with superuser and it seemed to be working then said rebooting and "please wait...." and it never did anything (except the kindle booted back to the blue kind fire screen)
Click to expand...
Click to collapse
ANY help would be appreciated... im sitting here screwing with it waiting for a reply....
Untraumatized said:
ANY help would be appreciated... im sitting here screwing with it waiting for a reply....
Click to expand...
Click to collapse
well i managed to fix it by just factory resetting it with no help AT ALL
Very likely the factory reset had nothing to do with it. Just simply having it plugged in via USB may have given it enough time to charge. Questions of this nature are best handled in q & a not in development.
Untraumatized said:
well i managed to fix it by just factory resetting it with no help AT ALL
Click to expand...
Click to collapse
I'm sorry for not sitting at my computer, waiting with baited breath for you to respond, so I can devote all of my attention to your problem. I hope you can forgive me.
I wasnt trying to be offensive lol I was just proud to figure it out with NO HELP AT ALL! But anyways I am pretty sure it wasnt the charge because it was at 56% before and after i did the factory reset, and after the factory reset i backed it up and it finished that time (last time i had to unplug the KF and hard reset it)... Also I tried resetting it a couple times before the factory reset and it always rebooted once it got to the slide to unlock screen. Anyways it works, I am probably going to give it to my mom because of the simplicity (she just needs email, and internet... lol) and I might try to get my hands on a Nexus 7
AND HOW DO I DELETE ALL THOSE REPOSTS? THE DELETE BUTTON ISNT WORKING FOR ME ^__^'
Untraumatized said:
I wasnt trying to be offensive lol I was just proud to figure it out with NO HELP AT ALL! But anyways I am pretty sure it wasnt the charge because it was at 56% before and after i did the factory reset, and after the factory reset i backed it up and it finished that time (last time i had to unplug the KF and hard reset it)... Also I tried resetting it a couple times before the factory reset and it always rebooted once it got to the slide to unlock screen. Anyways it works, I am probably going to give it to my mom because of the simplicity (she just needs email, and internet... lol) and I might try to get my hands on a Nexus 7
AND HOW DO I DELETE ALL THOSE REPOSTS? THE DELETE BUTTON ISNT WORKING FOR ME ^__^'
Click to expand...
Click to collapse
Correct me if im wrong but you can't delete posts....but this thread should not be in Android Dev section, it should be in Q and A... Not to be mean or anything I am going to report this thread so it can be moved to the right section (to help the mods out)
OP, First This Thread Is In The Wrong Place. And It Appears To Me Users Where Trying To Help, On Limited Information. But You Figure It Out On Your Own Great.
Thank You And Thread Closed.
I've had my Samsung Galaxy Tab S 8.4 (SM-T705Y) for just over two years now and it has worked brilliantly beside the odd issue here and there, including the device freezing from time-to-time. Each time that particular freezing issue has happened, I've used the 'Power and Volume Down buttons' technique and it has successfully fixed the issue.
Now, a few days ago, I was using my tablet for normal morning things; music app playing in the background, YouTube opened on the side, using the preinstalled Browser and Google Chrome apps, etc. I am not sure if it was updating any Google or Samsung apps at the time. The screen froze up so I left it for a few minutes, seeing if it would unfreeze. When it didn't, I used the same Power and Volume Down technique, which successfully forced-restarted the tablet. There was a small mistake I made doing this; I was holding down both the Power button and Volume Up button. It took me around thirty seconds to realise why the screen wasn't turning off and switched to the Volume Down button. At the time, both my earphones and the charging cord were connected.
However, upon the loading screen, I noticed that it did not pass the Samsung logo screen with the little explosion of blue circles and just kept replaying the same animation repeatedly. The Application History and Back buttons did not light up and the device did not vibrate as it normally does when it boots up. I repeated the Power-Volume Down technique to see if that would fix the issue. Once again, the tablet rebooted normally but was stuck at the logo screen playing the animation. I tried this same force-restart again, this time without the charger plugged in. No change.
So, I left it running through the animation while doing Google searches through forums and getting into contact with Samsung as to what the issue could be. I'll list down below what my tablet can and can't do at the moment and hopefully someone will have a clue as to what is going on and how to fix it. I will point out now that it was not going through a firmware update at the time, the device is not rooted and nor do I plan on taking that path with it, and I have not made any changes to it that can void the warranty.
It can:
- Recharge (The battery icon will show up if it is force-restarted and the charger is plugged in at the time.)
- Reboot (It's not exactly stuck in a bootloop, more of just the 'explosion' animation replaying over-and-over.)
- Enter Recovery Mode
It cannot:
- Enter Safe Mode
- Be Shut Down without the charger attached (As stated above, the device will only turn off with the Power-Volume Down buttons held for about 30 seconds and that causes the device to restart, not turn off. The only way for it to completely shut down is to have the charger connected and then unplug it after the battery icon appears.)
I have tried removing the SD card and placing it back in, power-cycling it, letting it run on the animation until the battery runs out and then letting it recharge to 100% before turning it on again, connecting it to Samsung Smart Switch (which recognises that there is a Samsung device connected, but not being able to register the device itself), and wiping the Partition Cache (Also note; the Recovery Mode has the 'No Command' sign with the android laying down and the red triangle with the exclamation point above it. Clearing the Partition Cache seemed to go smoothly, however when I chose the 'reboot device now' option, the 'No Command' sign changed to 'Error!' and rebooted the device anyway.) I am now currently trying another technique written on a different website (though since I am a new user, I cannot post up URLs at the moment). So far, plugging in the earphones alone hasn't worked and the device is currently connected to my laptop - which is shut off - and still has the earphones connected, but the animation is the only thing the screen is still showing.
I have important files saved in the internal storage of my Tab S and I do not have them backed up, which is the only issue that's stopping me from just going ahead and doing a Factory Reset as I cannot lose these files.
I am unsure if my Tab S is soft-bricked or if this is another issue entirely and I just missed something that could have already fixed it.
Yes, this is a long and detailed post, but hopefully with these details, someone will be able to help with this issue. If I can restore my Tab S to its condition before the freeze, that would be amazing, but I can definitely settle with only being able to salvage my files from the internal storage and then performing a Factory Reset on it.
Thank you in advance~
It might be a corrupt partition. The way i know involve rooting or the other one might format your device to factory setting.
edan1979 said:
It might be a corrupt partition. The way i know involve rooting or the other one might format your device to factory setting.
Click to expand...
Click to collapse
Really? I might look into that a bit more, thanks! With the second method you mentioned, how likely are the chances of it formatting the device to the factory settings?
AussieMouse said:
Really? I might look into that a bit more, thanks! With the second method you mentioned, how likely are the chances of it formatting the device to the factory settings?
Click to expand...
Click to collapse
download the official firmware and flash it via odin. it usually fix this type of problem. but usually the files on the internal storage/sdcard will be intact. only the data apps will be gone. this will not break your warranty (its already 2 yo device... no more warranty anyway ^_^)
edan1979 said:
download the official firmware and flash it via odin. it usually fix this type of problem. but usually the files on the internal storage/sdcard will be intact. only the data apps will be gone. this will not break your warranty (its already 2 yo device... no more warranty anyway ^_^)
Click to expand...
Click to collapse
Alright, I'll try that and let you know how it goes. Is there any specific website I should download the firmware (4.4.2 KitKat) from? (Yeah, I agree with you there! Still, just to be on the safe side~)
KIT KAT? ok that's old... hahaha... why dont you try MM. I think you can search for it at fw.updato.com probably can see all related firmware there.
edan1979 said:
KIT KAT? ok that's old... hahaha... why dont you try MM. I think you can search for it at fw.updato.com probably can see all related firmware there.
Click to expand...
Click to collapse
Haha Yeah, I'm not too fond of installing software updates due to past experiences~ I'll have a look around.
AussieMouse said:
Haha Yeah, I'm not too fond of installing software updates due to past experiences~ I'll have a look around.
Click to expand...
Click to collapse
MM is ok. I dont have any problem with it.
edan1979 said:
MM is ok. I dont have any problem with it.
Click to expand...
Click to collapse
Thank you so much for your help! I managed to find the KitKat 4.4.2 firmware on SamMobile and flashing it restored everything~
Hi all,
I am encountering this strange bug randomly: sometimes the device Is rebooting itself and it goes automatically in recovery mode, sometimes after a reboot it does the same. The error is always: Can’t load Android system. clicking on “try again” solves the issue (sometimes at the first retry, sometimes after some retries).
I’m attaching the error screens, also because the error message is not every time the same (Attaching also a normal way to enter recovery).
Has someone encounter this bug?
Any hints on how to solve this? I haven’t already do a full reset of the phone, but i think it wilL be the next step I’ll do if the phone is continuing like this.
Thanks!
Hi Arobase40, thanks for your answer.
Yes i know that this things could happen if you do some strange things to the phone (and in my past i was used to that ) but in this case, all is pure and untouched, no unathourized apk and no modding at all. (My use is quite noob-ish now eheh)
And that's seems very strange! :/ I made only ota update and this happened both with android 11 and 12.
Arobase40 said:
This mostly happens when you did some tricky things on your phone. lol
If full reset is not enough (specially when the system is missing....) you'd have to restock it with an official Samsung firmware... ^^
Click to expand...
Click to collapse
Hi Arobase40, thanks for your answer.
Yes i know that this things could happen if you do some strange things to the phone (and in my past i was used to that ) but in this case, all is pure and untouched, no unathourized apk and no modding at all. (My use is quite noob-ish now eheh)
And that's seems very strange! :/ I made only ota update and this happened both with android 11 and 12.
Arobase40 said:
Well ok, in your case try to flash back a stock firmware from Samsung with Frija or Samfw (don't forget to supply the correct model and CSC) using PC Odin.
If that don't fix the problem then get in touch with your local Samsung website and you should find a phone number for the after sale service and they will give you the nearest Samsung official repair center from your home.
They should fix this issue very quickly using most probably the same tool which is PC Odin.
If you go to the repair center don't forget to backup all your apps and data, remove your scard if you have one and also your sim card...
Click to expand...
Click to collapse
Thanks for your help and explanations.
Just to be updated and make some laugh: today the phone while was charging has become completely unresponsive, showing "Samsung Galaxy" on a black screen when touching Power Button or connecting to Power. After a while (hard pressing Power Button and Power+vol up) it restart itself and works again. Never had such an experience with a phone (a COMPLETELY stock phone)
IvanCattaneo95 said:
Thanks for your help and explanations.
Just to be updated and make some laugh: today the phone while was charging has become completely unresponsive, showing "Samsung Galaxy" on a black screen when touching Power Button or connecting to Power. After a while (hard pressing Power Button and Power+vol up) it restart itself and works again. Never had such an experience with a phone (a COMPLETELY stock phone)
Click to expand...
Click to collapse
Idk, seems like a hardware issue to me. Try and have a go at where you've bought it and have them check it over.
My first thought too is hardware.
A few years ago I had something similar with a different phone (Moto G) - as a last ditch effort I popped out the SIM and SD cards and reseated them and it worked perfectly after that. If you have an SD card you might even want to leave it out a few days just to see.
Not saying this is your issue but couldn't hurt to try!