hey, im using D855 LG G3, i installed CloudyG3 (LG G4 ROM) and its really stable but i need back to stock now. But im worried about the kdz and TOT method. i used kdz method 2-3 times, didnt use TOT method. anyway i have a question ; Can i use the LG PC Suite for back to stock rom? becouse if i download the kdz from internet, its modified there are too many apps on rom (china apps) i dont want them i cant trust (it wont be rooted if its back to stock). i used lg pc suite too many times, or can u guys give me the original D855 v20i kdz file link (v20i-SEA-XX) im not sure about v20i-SEA-XX or XX-SEA-v20i but im sure, its v20i and SEA..
thank you all! :*
taylaan said:
hey, im using D855 LG G3, i installed CloudyG3 (LG G4 ROM) and its really stable but i need back to stock now. But im worried about the kdz and TOT method. i used kdz method 2-3 times, didnt use TOT method. anyway i have a question ; Can i use the LG PC Suite for back to stock rom? becouse if i download the kdz from internet, its modified there are too many apps on rom (china apps) i dont want them i cant trust (it wont be rooted if its back to stock). i used lg pc suite too many times, or can u guys give me the original D855 v20i kdz file link (v20i-SEA-XX) im not sure about v20i-SEA-XX or XX-SEA-v20i but im sure, its v20i and SEA..
thank you all! :*
Click to expand...
Click to collapse
I don't think you can, but, if you download the kdz from a trusted place, you are actually back to stock without "china apps".
You can download the kdz here: http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/
but be sure to flash the good one
RapHaeL_4_4_4_ said:
I don't think you can, but, if you download the kdz from a trusted place, you are actually back to stock without "china apps".
You can download the kdz here: XxXxXxXxXxXxXxXx
but be sure to flash the good one
Click to expand...
Click to collapse
its done! ty i found an v20i-SEA-XX kdz without china anyway ty. u awe bro! and i used lg flash tool.
Hi,
I purchased the phone in the UK from the network carrier Vodafone. I have done a fair bit of research on the rooting and unrooting process mainly via videos and reading tutorials on XDA.
I would like to root the phone and gain super user access and install some Xposed modules but would also like to be able to unroot and flash back to a stock Vodafone firmware encase I need to claim under warranty. I have been trolling the internet to get the correct KDZ file and found this site (ttp://devtester.ro/projects/lg-firmwares/country.php?country=United+Kingdom). I believe that the correct firmware may be on here but am a little confused on what the suffix and software version means to be honest.
The reason for my confusion is that I updated the firmware to 6.0 Marshmallow through the LG bridge but when I now check my phones software version it states v20b-234-15. I assume this is right but from memory the first software version when I got the phone was something like H81510B_00.
I cant remember exactly what it was before unfortunately but the KDZ files I have found state H81510C_00 (Suffix - AVDFVK) and H81510C_00 (AVDFLR) and this does seem to make sense but I'm thinking it was B instead of C but and not 100% on that.
Do you think these KDZ files would be the correct one to flash back to encase I run in to some problems rooting?
I am also assuming that this KDZ is Android Lollipop and not Marshmallow so is it OK to use this to revert back from Marshmallow?
Thanks and any help would be much appreciated.
Ross
The 10X version are all Lollipop, 20X is marshmallow.
When flashing a KDZ on your phone, what's important is what model your phone is. H815 in your case.
If you want to restore to stock in case something goes wrong, you can find everything here: http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
In there is a link to this directory: http://storagecow.eu/index.php?dir=Xda/LG+G4/ where you find pretty much all KDZ files for G4 phones.
I'm not that experienced myself, but I rooted my phone just recently and I can share my experience with you.
I have a H815. It was a V10c-TWN-XX version (Taiwan). I updated to Marshmallow with LG Bridge also and the new software version was V20b-TWN-XX.
Marshmallow rooting is not possible on my phone because I can't unlock the bootloader on it. And Marshmallow rooting is only possible with an unlocked bootloader. Unlocking the bootloader is only possible on European phones (http://developer.lge.com/resource/mobile/RetrieveBootloader.dev?categoryTypeCode=ANRS). I asked autoprime (renown user and developer here) if I can unlock bootloader after flashing an European KDZ on it. He said no, having European software on it is not enough, it has to be a phone manufactured for the european market. Dont know why, guess because of different hardware.
So, not being able to root MM, I had to revert back to stock (downgrade) using one of the KDZs.
I chose the most recent one in the directory I linked (which is the Poland H81510E). In the "Go Back to Stock" thread I linked the OP says to use LG Flash Tool 2014, which unfortunately doesn't work with Marshmallow. But fret not, it works with LG UP! http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
When I tried flashing the KDZ with Flash Tool 2014, the process failed with an error at 5%. It worked flawlessly with LG UP. Here's more information regarding downgrading, but it really isnt hard. Just download + install LG UP. Launch it. Connect your phone. Choose KDZ file. Select option "upgrade". Hit start.
NOTE: after the firmware update was done, the phone rebooted automatically and for me it stuck at at the LG Logo (bootloop). But a simple hard factory reset did it, the phone booted and my new version was 10e-something. With Lollipop 5.1 of course.
After that, I rooted my phone using this pre-rooted image: http://forum.xda-developers.com/g4/development/h815-eu-l-p-t-sea-twn-t3176195
and this guide: http://forum.xda-developers.com/g4/...-tmo-vzw-intl-variants-soon-root-lg-t3164765/
I now have a "H81510e-EUR-XX" Lollipop 5.1 with root (SuperSU 2.49).
I don't really know about Vodafone and if carrier specific firmware is necessary in this case. If not, you could use any 815 firmware.
From the site you have linked with the KDZ files..... it seems they are all the same.
If you check the table for H815 KDZs from Vodafone, there are some 10C and 10D versions. Now I compared the fileKey parameter in the URL to the 10C files and the 10D files and also the bytes of the files.
All the 10C version are identical to each other, same for 10D.
Check out this screenshot I made for you: http://i.imgur.com/Ie0w4us.png
Bytes are also identical, so it's pretty safe to say those are the same files.
Dont know why they are listed several times there. The suffix doesnt matter.
I'd grab a 10D if I were you. But I think the Poland 10E should work, too. Better confirm it with somebody else though.
If you flash your system to 10e, you can use the pre-rooted image I used. Otherwise you will have to inject root yourself: http://forum.xda-developers.com/g4/general/lg-g4-100-root-success-directives-root-t3180586. In this method you create an image of your system and inject root into the image, which you then flash back on your phone.
I've found a couple of guides explaining what to do, but I don't have a tot file nor do I know how to make one. I read that I need to use a tot file for the same software version that my phone had prior to bricking, and that is 6.0 (Marshmallow). Does anyone have one of those files or know where to get one? Thanks!
i root my phone with kinggo root after root me install supersu . The supersu need me update binary after update phone will restart . But now phone is can't start
Stock on version logo
LG G Pad 10.1
LG-VK700
Any one please help me ?????????? thanks
fixing a hole
Do this: http://forum.xda-developers.com/showthread.php?t=2590185. Same procedure, only you need is property kdz file from https://mega.nz/#F!fgskmDSB!GANW9PaJ0dW3lvHCWBzscQ.
Hi but now see you reply my phone ready flash but i flashing wrong now my phone can't turn on can you me thk for answer
fixing a hole
If you f**ed up the download mode, y'u must try flash via fastboot nicely. I don't have much time now, but y'u find this method on xda, it's work for this models probably. You also need the kdz extractor to unpack firmware: http://forum.xda-developers.com/showthread.php?t=2600575. Remember to use the Verizon version of firmware.
I can wait you it you free time because i don't try by myselt the flashboot not recognising my phone i feel my phone is hard brick thk for answer
I have LG G8 Alexa variant. Model LM-G820QM.
I think ts on latest firmware "qm21e". Right now I live in India so the VoLTE is not working. I tried to cross-flash it to Open firmware but LGUP gave error "Cant change the device(AMZ_US > OPEN_US)".
I have three questions.
Can I cross flash Korean firmware ?
And if so, will i get VoLTE working ?
And my G8 has 2 cams while the Korean varient has 3 cams. Will my cams work with Korean firmware ?
Thank you.
Do you by any chance still have the OPEN_US Firmware?
I've been looking everywhere for it but I can't find it.
Download LG Firmware for LG G8 ThinQ LMG820QM Android 10 Q kdz stock BPT Rom
Download Android 10 Q KDZ stock firmware for download with direct link
lg-roms.com
--------
| Firmware Update Android 10 Q kdz stock AMZ Rom
Download Android 10 Q KDZ stock firmware for download with direct link
lg-firmware.net
I think any of this 2 are OPEN. If not then reply me back I will deep search on google. I happend to found it somewhere but can't remember where exactly.
Thanks for your reply
Unfortunately, neither one worked.
I tried the first one, however the flash tool didn't work because (OPEN_US_>NAO_US)
The second one would not download at all. I don't think it would have worked anyway since my phone is not the Alexa version. It's factory unlocked, purchased from Best Buy.
Hey man, I was able to figure out my problem! Not only that, I discovered one of the NAO_US Firmwares was actually OPEN_US, and that worked for my phone. I am now back up and running, with an unlocked bootloader and Root!
I appreciate your help, and I want to help you if I can.
As for the cross-flashing, you can't do it via LGUP. The only possible way is to download the firehose for your phone and to use the Qualcomm Image Flash Loader(QIFL) tool. You can extract the firmware you want to flash, and load all the images into the QIFL partition manager. There is no guarantee your phone will boot from it, but you can try it. NOTE: Do NOT modify the OP partitions! This will cause your phone to throw an OPID mismatch error and it won't boot!
As for the cameras, you may be able to extract the current Camera APK from your phone and install that on the Korean firmware so that you are still able to use them. No guarantee this will work, and they might work fine with the Korean camera APK, but it's worth doing before you flash.
awgybop1 said:
Hey man, I was able to figure out my problem! Not only that, I discovered one of the NAO_US Firmwares was actually OPEN_US, and that worked for my phone. I am now back up and running, with an unlocked bootloader and Root!
I appreciate your help, and I want to help you if I can.
As for the cross-flashing, you can't do it via LGUP. The only possible way is to download the firehose for your phone and to use the Qualcomm Image Flash Loader(QIFL) tool. You can extract the firmware you want to flash, and load all the images into the QIFL partition manager. There is no guarantee your phone will boot from it, but you can try it. NOTE: Do NOT modify the OP partitions! This will cause your phone to throw an OPID mismatch error and it won't boot!
As for the cameras, you may be able to extract the current Camera APK from your phone and install that on the Korean firmware so that you are still able to use them. No guarantee this will work, and they might work fine with the Korean camera APK, but it's worth doing before you flash.
Click to expand...
Click to collapse
I see, but I just want VoLTE to work. I don't mind using stock rom or custom rom too. So keeping that in mind what do you suggest? And also, Do you think that your solution " I discovered one of the NAO_US Firmwares was actually OPEN_US, and that worked for my phone. I am now back up and running, with an unlocked bootloader and Root! " could work for me too ? If so do let me know how did you figured that NAO_US was actually OPEN_US. Maybe I can find out one for AMZ_US.
On the box Model : G820QM
SKU : G820QM8 (QM8 stands for AMZ)
Thank you.
I'm really not sure how VoLTE works internally, so I couldn't tell you if using another firmware would actually work for you - but the way I found out one of the firmwares was actually OPEN_US was by extracting it using the KMZ extractor tool someone made. This is how I was able to reflash the partition on my phone that I screwed up on in the first place and created a brick with. Like I said, you could manually reflash all those partitions one-by-one in QFIL, but i don't recommend it as it may not even work and could potentially brick your device. It's really up to you in this case, if you'd like to try though:
Download the firmware you want to try, search for KZM extractor on Google, download QFIL and all of it's prerequisites, and finally the firehose.
Use the KZM extractor and place the firmware inside of it.
Once it is done extracting all the files, put your phone into download mode and open QFIL
NOTE: DO NOT FLASH THE PARTITIONS WITH 'OP' IN THEM! Your phone won't boot for sure!
From QFIL use the firehose file and manually, one by one, sort through the output files of the KZM extractor and find the partitions that match their name and flash them with the file.
Zero guarantees this will work, and you may end up with a brick for a phone at the end of the day, but if you're that desperate it just might work.
Hi there.
I am still looking for solutions for VoLTE to work. I googled a lot and came on this post " https://piunikaweb.com/2021/06/07/unlocked-lg-g8-thinq-now-supports-att-volte-after-april-update/ "
Mine is Amazon version "QM8". Yet I did received april update via OTA. But still no VoLTE. I can OEM unlock from devs. Can I flash AT&T "QM7" on Amazon "QM8" ?
What do you think of this please let me know.
Thank you
VoLTE seems to depend on files in the OP partition, so crossflashing other partitions but not OP will not get VoLTE to work. LGUP will not allow crossflashing.
See my experience to get working VoLTE and Wifi Calling: https://forum.xda-developers.com/t/lg-g8-volte-fix.4113291/post-85455109
You will need to be bootloader unlocked and rooted.
awgybop1 said:
Hey man, I was able to figure out my problem! Not only that, I discovered one of the NAO_US Firmwares was actually OPEN_US, and that worked for my phone. I am now back up and running, with an unlocked bootloader and Root!
I appreciate your help, and I want to help you if I can.
As for the cross-flashing, you can't do it via LGUP. The only possible way is to download the firehose for your phone and to use the Qualcomm Image Flash Loader(QIFL) tool. You can extract the firmware you want to flash, and load all the images into the QIFL partition manager. There is no guarantee your phone will boot from it, but you can try it. NOTE: Do NOT modify the OP partitions! This will cause your phone to throw an OPID mismatch error and it won't boot!
As for the cameras, you may be able to extract the current Camera APK from your phone and install that on the Korean firmware so that you are still able to use them. No guarantee this will work, and they might work fine with the Korean camera APK, but it's worth doing before you flash.
Click to expand...
Click to collapse
Pls how to extract kdz,mine get error bad header