Error flashing cyanogenmod 12.1 - Galaxy Tab S Q&A, Help & Troubleshooting

Okay so i'm having some issues flashing this rom. While installing it tells me that the file im using' lte' is the wrong one for my device and that I should be using wifi. My tab is SMT705 .. i'm very confused, any ideas?

Update
Accidental reply.

You need to install the t700 version of twrp to install the wifi version of cm or remove the assert lines from the updater script.

ashyx said:
You need to install the t700 version of twrp to install the wifi version of cm or remove the assert lines from the updater script.
Click to expand...
Click to collapse
How comes it won't let im install the lte version of cm when my tablet is lte enabled? Also, this is my first ever time flashing a rom so I don't know what the updater script it.
I tried installing the wifi version of cm, doing what the error said. The installation went a little further but got stuck at 'flashing the image conditionally'

Danohhsee said:
How comes it won't let im install the lte version of cm when my tablet is lte enabled? Also, this is my first ever time flashing a rom so I don't know what the updater script it.
I tried installing the wifi version of cm, doing what the error said. The installation went a little further but got stuck at 'flashing the image conditionally'
Click to expand...
Click to collapse
It doesn't matter what your device is, you need to use the right recovery. If you have installed the t700 version of recovery then cm will think your device is a wifi version.
You have to wait at the flashing image conditionally message. Its not stuck, it takes a while for the rom to install, just be patient.

ashyx said:
It doesn't matter what your device is, you need to use the right recovery. If you have installed the t700 version of recovery then cm will think your device is a wifi version.
You have to wait at the flashing image conditionally message. Its not stuck, it takes a while for the rom to install, just be patient.
Click to expand...
Click to collapse
Ok, so as far as I'm aware, the TWRP recovery I'm using covers both t700 and t705. So would you suggest using a different recovery, or just flashing the wifi cm?
Thanks for your help btw

Danohhsee said:
Ok, so as far as I'm aware, the TWRP recovery I'm using covers both t700 and t705. So would you suggest using a different recovery, or just flashing the wifi cm?
Thanks for your help btw
Click to expand...
Click to collapse
Just use the t705 specific recovery.

ashyx said:
Just use the t705 specific recovery.
Click to expand...
Click to collapse
I can't find a specific t705 recovery, could you point me in the right direction please?

Danohhsee said:
I can't find a specific t705 recovery, could you point me in the right direction please?
Click to expand...
Click to collapse
. .

ashyx said:
. .
Click to expand...
Click to collapse
I realise it looks like I'm asking you to do it for me, but even on the TWRP website, it only gives me this option https://twrp.me/devices/samsunggalaxytabs84.html which I believe isnt the t705 recovery.

Danohhsee said:
I realise it looks like I'm asking you to do it for me, but even on the TWRP website, it only gives me this option https://twrp.me/devices/samsunggalaxytabs84.html which I believe isnt the t705 recovery.
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24052804347803615

ashyx said:
https://www.androidfilehost.com/?fid=24052804347803615
Click to expand...
Click to collapse
Thanks for that. Once it's installed will it be fine to update to the most recent twrp?

Danohhsee said:
Thanks for that. Once it's installed will it be fine to update to the most recent twrp?
Click to expand...
Click to collapse
Yeh it's up to you.

Related

[Q] screen mirroring

I cannot use screen mirroring keep getting a message that says Unable to start Screen Mirroring because of a hardware issue
any help is appreciated thanks
A152394 said:
I cannot use screen mirroring keep getting a message that says Unable to start Screen Mirroring because of a hardware issue
any help is appreciated thanks
Click to expand...
Click to collapse
You're rooted and using a custom recovery, right?
blindmanpb said:
You're rooted and using a custom recovery, right?
Click to expand...
Click to collapse
Yes that is correct
A152394 said:
Yes that is correct
Click to expand...
Click to collapse
That's why, then.
Flash stock recovery and that should restore screen mirroring.
blindmanpb said:
That's why, then.
Flash stock recovery and that should restore screen mirroring.
Click to expand...
Click to collapse
Where do I get stock recovery from?
blindmanpb said:
That's why, then.
Flash stock recovery and that should restore screen mirroring.
Click to expand...
Click to collapse
Thanks but it didn't work for me...
Anybody have any ideas?
whatllitbenext said:
Thanks but it didn't work for me...
Anybody have any ideas?
Click to expand...
Click to collapse
If your'e on Android 4.3, use this:
http://forum.xda-developers.com/showthread.php?t=2556527
On Android 4.4. it works fine for me, I use it all the time, hope I helped :good:
22sl22 said:
If your'e on Android 4.3, use this:
http://forum.xda-developers.com/showthread.php?t=2556527
On Android 4.4. it works fine for me, I use it all the time, hope I helped :good:
Click to expand...
Click to collapse
Thanks but my GN2 is on 4.3 (Jedi X2 Rom) and it's got not problem mirroring.
It's my GN10.1-2014Ed. on 4.4.2 (Hyperdrive RLS 3.1) that's not connecting...
whatllitbenext said:
Thanks but my GN2 is on 4.3 (Jedi X2 Rom) and it's got not problem mirroring.
It's my GN10.1-2014Ed. on 4.4.2 (Hyperdrive RLS 3.1) that's not connecting...
Click to expand...
Click to collapse
For me, the only that worked:
- once rooted, make sure you get both current status and version (to be checked in download mode) as OFFICIAL (you can use Xposed or similar to do this, different threads can be found on this)
- flash with stock recovery
Hope this can help you as well...
jeje2 said:
For me, the only that worked:
- once rooted, make sure you get both current status and version (to be checked in download mode) as OFFICIAL (you can use Xposed or similar to do this, different threads can be found on this)
- flash with stock recovery
Hope this can help you as well...
Click to expand...
Click to collapse
Thanks @jeje2.
In Xposed I found system status under "Security Hacks" but couldn't find where to change version? Would you please let me know?
Thanks!
whatllitbenext said:
Thanks @jeje2.
In Xposed I found system status under "Security Hacks" but couldn't find where to change version? Would you please let me know?
Thanks!
Click to expand...
Click to collapse
You should try to go over specific Mode / Module (not sure about the English translation). To do this:
- Install Xposed Installer (or similar mode xposed mode installer)
- In Xposed Installer, download the mode "Cosmetics Device Status Normal Modification"
- Then, in the mode menu, select ComesticSysScopeNormalizer (or something that looks like this...) to activate
Restart, flash stock recovery, boot in recovery mode... and cross fingers!
Hope this will work
Best,
Sorry if this is too simple, just afraid of the bricking with Knox, etc. Which Stock Recovery do I use with KitKat after rooting?
Thanks!
offtohavasu said:
Sorry if this is too simple, just afraid of the bricking with Knox, etc. Which Stock Recovery do I use with KitKat after rooting?
Thanks!
Click to expand...
Click to collapse
This one should be fine http://forum.xda-developers.com/showthread.php?t=2727607
jeje2 said:
This one should be fine http://forum.xda-developers.com/showthread.php?t=2727607
Click to expand...
Click to collapse
Worked perfect. Back to screen mirroring!
offtohavasu said:
Worked perfect. Back to screen mirroring!
Click to expand...
Click to collapse
Really happy it did and hopefully it will help some others, I have spent days trying to sort this out
not a rooted device
My tablet isn't rooted & I don't want to root it because it will violate my warranty so is there any other way to get the screen mirroring to work without rooting my device?
sweetthing4523 said:
My tablet isn't rooted & I don't want to root it because it will violate my warranty so is there any other way to get the screen mirroring to work without rooting my device?
Click to expand...
Click to collapse
Normally it should work until you flash a custom recovery. But in this case you already set the knox flag. So, it doesn't matter if you are also rooted or not.
For whom it not worked:
After flashing the stock recovery boot once into recovery mode. For some this helps.
Mine's stock unrooted and i get that error too.

[Q] only 1 ROM

I hit the wrong button the other day while trying to reflash stock to my S3 and wiped the system folder. the brain had farted and forgotten about the lock out. only had a older version of TWRP so was only able to install Cyanogen 10.0.0.0 and now I can't flash anything else. not a newer version. not a different ROM. everything else fails. I think the error message said something about a boot loader.
it works but CM 10.0.0.0 just isn't working for me (I HAVE to have a camera for work).
any recommendations or suggestions would be greatly appreciated.
Da Captain Quack
Captain Quack said:
I hit the wrong button the other day while trying to reflash stock to my S3 and wiped the system folder. the brain had farted and forgotten about the lock out. only had a older version of TWRP so was only able to install Cyanogen 10.0.0.0 and now I can't flash anything else. not a newer version. not a different ROM. everything else fails. I think the error message said something about a boot loader.
it works but CM 10.0.0.0 just isn't working for me (I HAVE to have a camera for work).
any recommendations or suggestions would be greatly appreciated.
Da Captain Quack
Click to expand...
Click to collapse
Odin is your friend....
6th_Hokage said:
Odin is your friend....
Click to expand...
Click to collapse
yes it is. but no mater what I do Odin puts stock (or any other ROM) on and then it's boot loop until I reflash CM 10.0.0.0
I can change recovery using Odin but not the ROM.
Captain Quack said:
yes it is. but no mater what I do Odin puts stock (or any other ROM) on and then it's boot loop until I reflash CM 10.0.0.0
I can change recovery using Odin but not the ROM.
Click to expand...
Click to collapse
Use Philz recovery, do all the wipes including internal SD (not external) and flash whatever ROM you want. TWRP doesn't play as nicely on this phone as Philz.
Sent from my LG-V700
mattzeller said:
Use Philz recovery, do all the wipes including internal SD (not external) and flash whatever ROM you want. TWRP doesn't play as nicely on this phone as Philz.
Sent from my LG-V700
Click to expand...
Click to collapse
what I get back is
Using Legacy property enviornment for update-binary...
please upograde to latest binary
assert failed: getpro(ro.bootloader*) == "L710VPBLJ7" ||
last bit over and over. tried a newer CM. tried a differnt ROM. nothing. did all the wipes. only thing that would install is CM 10.0.0
Captain Quack said:
what I get back is
Using Legacy property enviornment for update-binary...
please upograde to latest binary
assert failed: getpro(ro.bootloader*) == "L710VPBLJ7" ||
last bit over and over. tried a newer CM. tried a differnt ROM. nothing. did all the wipes. only thing that would install is CM 10.0.0
Click to expand...
Click to collapse
what carrier do you currently have? and did you try to Odin all possible .tar rom files?
6th_Hokage said:
what carrier do you currently have? and did you try to Odin all possible .tar rom files?
Click to expand...
Click to collapse
Sprint is my carrier. I tried the ROMs I have. Boot-stock-dnd8-SPHl710. that won't work because of the lockout I'm told. all of the other ROMs I have are zip files. real damn confusing trying to figure out which is what. I've just spent half an hour looking and as near as I can tell all ROMs come out in .zip not .tar. I am confused and befuddled.
I don't really care what ROM to much. but CM trashes my camera and I have to have it for work.
I really do appreciate your help.
Captain Quack said:
Sprint is my carrier. I tried the ROMs I have. Boot-stock-dnd8-SPHl710. that won't work because of the lockout I'm told. all of the other ROMs I have are zip files. real damn confusing trying to figure out which is what. I've just spent half an hour looking and as near as I can tell all ROMs come out in .zip not .tar. I am confused and befuddled.
I don't really care what ROM to much. but CM trashes my camera and I have to have it for work.
I really do appreciate your help.
Click to expand...
Click to collapse
try the NJ2stock.tar in Odin and see what happens hopefully this one works for you
Captain Quack said:
what I get back is
Using Legacy property enviornment for update-binary...
please upograde to latest binary
assert failed: getpro(ro.bootloader*) == "L710VPBLJ7" ||
last bit over and over. tried a newer CM. tried a differnt ROM. nothing. did all the wipes. only thing that would install is CM 10.0.0
Click to expand...
Click to collapse
That is a JB ROM. You would have to edit out the asserts before it will flash. But instead of doing that try using Odin to flash stock NJ2. Once you have stock on there, you should flash the last official release of Philz, then flash a ROM, try WickedS5.
Follow this thread to flash NJ2: http://forum.xda-developers.com/gal.../stock-l710vpudnj2-pc-odin-flashable-t3007847
Philz Recovery: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/philz_touch_6.48.4-d2lte.tar.md5
WickedS5 thread: http://forum.xda-developers.com/galaxy-s3-sprint/development/rom-wicked-s5-xperience-t2983340
Sent from my LG-V700
mattzeller said:
That is a JB ROM. You would have to edit out the asserts before it will flash. But instead of doing that try using Odin to flash stock NJ2. Once you have stock on there, you should flash the last official release of Philz, then flash a ROM, try WickedS5.
Follow this thread to flash NJ2: http://forum.xda-developers.com/gal.../stock-l710vpudnj2-pc-odin-flashable-t3007847
Philz Recovery: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/philz_touch_6.48.4-d2lte.tar.md5
WickedS5 thread: http://forum.xda-developers.com/galaxy-s3-sprint/development/rom-wicked-s5-xperience-t2983340
Sent from my LG-V700
Click to expand...
Click to collapse
YES! saying you rock is an understatment!!! thank you thank you thank you!!!
Captain Quack said:
YES! saying you rock is an understatment!!! thank you thank you thank you!!!
Click to expand...
Click to collapse
So I take it you're back up and running?
mattzeller said:
So I take it you're back up and running?
Click to expand...
Click to collapse
a bobble or two but yes. back up and running. now the camera works too lol. one quick question. is it safe to flash other ROMs from this point on? I flashed Philz recovery instead of TWRP
Captain Quack said:
a bobble or two but yes. back up and running. now the camera works too lol. one quick question. is it safe to flash other ROMs from this point on? I flashed Philz recovery instead of TWRP
Click to expand...
Click to collapse
I find Philz works better than TWRP on our devices anyway. Feel free to flash ROMs from Philz. Just don't try to Odin anything lower than your current baseband, or you will brick your device.
mattzeller said:
I find Philz works better than TWRP on our devices anyway. Feel free to flash ROMs from Philz. Just don't try to Odin anything lower than your current baseband, or you will brick your device.
Click to expand...
Click to collapse
thanks. it's a bummer I can't give you about 10 thanks clicks
off to look at other ROMS. CM doesn't seem to like the camera from what I see so it will be something else
Captain Quack said:
thanks. it's a bummer I can't give you about 10 thanks clicks
off to look at other ROMS. CM doesn't seem to like the camera from what I see so it will be something else
Click to expand...
Click to collapse
I'm glad I could be of some help to get you back up and going.
Captain Quack said:
YES! saying you rock is an understatment!!! thank you thank you thank you!!!
Click to expand...
Click to collapse
what was it that worked so people know if they have a similar issue for what ever reason?
6th_Hokage said:
what was it that worked so people know if they have a similar issue for what ever reason?
Click to expand...
Click to collapse
using Odin instead of recovery and ROM (listed below) did the trick to get back to stock. http://www.mediafire.com/download/jjg72biz2dzm6qb/L710VPUDNJ2_L710SPRDNJ2_SPR.zip

Crashing boot looping lines colours bad bad bad tablet

I have a tab s 8.4 sm t705 I was running kk rom I flashed LP rom and now it boot loops. The images I have attached is when it crashes and reboots. For some reason it is showing all lines and either blue or red screen sometimes.
I tried to flash twrp and it will not do it. I am at my wits end what to do any help would be a saviour
Cheers
update i was able to get twrp flashed but now when i try to flash a rom i get cannot mount system?????????????????????????
It looks like you flashed a ROM for the t805 not the t705.
First let's get you back to stock.
Download the firmware for your device from the link below.
Follow the instructions to install it. This will get you up and running again.
http://www.sammobile.com/firmwares/database/SM-T705/
ashyx said:
It looks like you flashed a ROM for the t805 not the t705.
First let's get you back to stock.
Download the firmware for your device from the link below.
Follow the instructions to install it. This will get you up and running again.
http://www.sammobile.com/firmwares/database/SM-T705/
Click to expand...
Click to collapse
I have already tried the proper firmware, sorry to say but I do know
shadow1212u said:
I have already tried the proper firmware, sorry to say but I do know
Click to expand...
Click to collapse
I beg your pardon, what's with that attitude?
No attitude Just saying that I know the rom is right OK
shadow1212u said:
No attitude Just saying that I know the rom is right OK
Click to expand...
Click to collapse
Have you istalled the lollipop bootloader?
Nope can u please help?
ashyx said:
Have you istalled the lollipop bootloader?
Click to expand...
Click to collapse
Nope can u please help?
shadow1212u said:
Nope can u please help?
Click to expand...
Click to collapse
I already tried. If you install the stock firmware from the link i posted it will install what you need. Which rom did you flash?
Or install one of the bootloaders from here: http://forum.xda-developers.com/galaxy-tab-s/general/t800-t805-lollipop-bootloaders-t3099362
I found bootloader and the rom is now back to stock LP T705XXU1ANG2_T705BTU1ANG2_BTU Just trying it now cheers
ashyx said:
I already tried. If you install the stock firmware from the link i posted it will install what you need. Which rom did you flash?
Or install one of the bootloaders from here: http://forum.xda-developers.com/galaxy-tab-s/general/t800-t805-lollipop-bootloaders-t3099362
Click to expand...
Click to collapse
All flashed now Just waiting fingers crossed
ashyx said:
I already tried. If you install the stock firmware from the link i posted it will install what you need. Which rom did you flash?
Or install one of the bootloaders from here: http://forum.xda-developers.com/galaxy-tab-s/general/t800-t805-lollipop-bootloaders-t3099362
Click to expand...
Click to collapse
flashed with LP rom stock and LP bootloader still same issue as my first post on this.
Any other ideas pls
shadow1212u said:
flashed with LP rom stock and LP bootloader still same issue as my first post on this.
Any other ideas pls
Click to expand...
Click to collapse
Ok 2 things, which rom did you flash?
Second if you flash the firmware in the link I gave you it will solve all your issues.
ashyx said:
Ok 2 things, which rom did you flash?
Second if you flash the firmware in the link I gave you it will solve all your issues.
Click to expand...
Click to collapse
I flashed stock LP rom T705XXU1BOD5 and I also flashed the bootloader in the link you give me and the issue still there? Im scratching my nogin here
any other ideas please
thanks
shadow1212u said:
I flashed stock LP rom T705XXU1BOD5 and I also flashed the bootloader in the link you give me and the issue still there? Im scratching my nogin here
any other ideas please
thanks
Click to expand...
Click to collapse
No need to flash the bootloader after flashing the stock firmware.
I would do a factory reset in recovery.
ashyx said:
No need to flash the bootloader after flashing the stock firmware.
I would do a factory reset in recovery.
Click to expand...
Click to collapse
Hi ya, I have already done that but issue still there. Now I can boot up and start the setup process and the tablet freezes and reboots about 1 minute into setup process near where you have to sign in to google
Any more suggestions:crying::crying::crying: please
Tbh I think you have a hardware issue.
Now new problem when I try to install twrp it will not do it, If I go into the system recovery and try to do factory reset an error shows as follows
E: unknown volume for path {/sbfs}
E: unknown volume "/sbfs"[/U][/U]
Data wipe complete.
I thought it may be battery related but I have changed to a genuine new battery. still same issue
Please please Tech God help me
ashyx said:
Tbh I think you have a hardware issue.
Click to expand...
Click to collapse
I think that to but this only happened when I tried to install LP rom

Signal and data and failing

I loaded CM-13.0 nightly and have Been updating as the updates come but when I go to make a call it takes forever to go through and start ringing and sometimes it r just hangs up. The data keeps going from LTE to nothing and no SIM . I can't get mms either. Can someone tell me what to do.thanks.
Sent from my SGH-T999 using Tapatalk
HUCCG said:
I loaded CM-13.0 nightly and have Been updating as the updates come but when I go to make a call it takes forever to go through and start ringing and sometimes it r just hangs up. The data keeps going from LTE to nothing and no SIM . I can't get mms either. Can someone tell me what to do.thanks.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Same thing is happening to me. I've tried using OctOs M and now I am on PacRom 6.0.1 and I am having the same "No sim card" error. I can text and call, but no Data whatsoever.
Have you tried changing your APN settings for your network on your phone?
wmzed said:
Same thing is happening to me. I've tried using OctOs M and now I am on PacRom 6.0.1 and I am having the same "No sim card" error. I can text and call, but no Data whatsoever.
Have you tried changing your APN settings for your network on your phone?
Click to expand...
Click to collapse
are you on the latest baseband for your phone?
ratchetrizzo said:
are you on the latest baseband for your phone?
Click to expand...
Click to collapse
My stock OS Is 4.1.2 and is running Baseband UVAMB7. Do I need to go for the higher updates for the LTE to work?
wmzed said:
My stock OS Is 4.1.2 and is running Baseband UVAMB7. Do I need to go for the higher updates for the LTE to work?
Click to expand...
Click to collapse
I think you need to be on UVUBOH1.
https://forum.xda-developers.com/showthread.php?t=1949687 has the list of FW and it looks like you are using a super super old baseband.
ratchetrizzo said:
I think you need to be on UVUBOH1.
https://forum.xda-developers.com/showthread.php?t=1949687 has the list of FW and it looks like you are using a super super old baseband.
Click to expand...
Click to collapse
Do I need to use ODIN for this? I tried installing UVUBOH1 with TWRP, but I get an error when I installing it:
"could not find 'META-INF/com/google/android/update-binary' in the zip file"
wmzed said:
Do I need to use ODIN for this? I tried installing UVUBOH1 with TWRP, but I get an error when I installing it:
"could not find 'META-INF/com/google/android/update-binary' in the zip file"
Click to expand...
Click to collapse
Yes, download https://www.androidfilehost.com/?fid=24052804347821137
NOTE, if you click on "UVUBOH1" and not the androidfilehost link in the FW thread, it links you to the wrong FW and you'll flash UVUBNC1! Make sure you click the androidfilehost link underneath UVUB0H1.
Then flash it with odin.
Afterwards let it reboot and upgrade, then odin TWRP back and either restore a nandroid or flash the rom of your choosing
Oh also, if you're still on 4.1 and on a touchwiz rom, you may want to factory unlock it before you upgrade.. Just because you can. Follow the unlock thread on here
ratchetrizzo said:
Yes, download https://www.androidfilehost.com/?fid=24052804347821137
NOTE, if you click on "UVUBOH1" and not the androidfilehost link in the FW thread, it links you to the wrong FW and you'll flash UVUBNC1! Make sure you click the androidfilehost link underneath UVUB0H1.
Then flash it with odin.
Afterwards let it reboot and upgrade, then odin TWRP back and either restore a nandroid or flash the rom of your choosing
Oh also, if you're still on 4.1 and on a touchwiz rom, you may want to factory unlock it before you upgrade.. Just because you can. Follow the unlock thread on here
Click to expand...
Click to collapse
Thank you so much! I will try this out soon and respond with the results! And I had already unlocked my device :. I had to root and use the RegionLock app to unlock it, as the *#197328640# menu option did not work for me.
wmzed said:
Thank you so much! I will try this out soon and respond with the results! And I had already unlocked my device :. I had to root and use the RegionLock app to unlock it, as the *#197328640# menu option did not work for me.
Click to expand...
Click to collapse
how did you make out?
ratchetrizzo said:
how did you make out?
Click to expand...
Click to collapse
Was quite a bit of trouble at first . I managed to download and flash the software. flashed TWRP via odin.
Then through TWRP, I rooted by using the Knox remover zip (as i was on official 4.3, my service signal did shoot up to normal again!). Installed SuperSU.
Now when I try to flash any ROM via TWRP it gives errors such as "Status 7", or error reading MD5 when I try to backup software.
wmzed said:
Was quite a bit of trouble at first . I managed to download and flash the software. flashed TWRP via odin.
Then through TWRP, I rooted by using the Knox remover zip (as i was on official 4.3, my service signal did shoot up to normal again!). Installed SuperSU.
Now when I try to flash any ROM via TWRP it gives errors such as "Status 7", or error reading MD5 when I try to backup software.
Click to expand...
Click to collapse
Make sure twrp is up to date for d2tmo, and make sure the rom you are flashing is 4.3 or later. I'm pretty sure that once you're on the latest 4.3 rom you can't flash anything lower
ratchetrizzo said:
Make sure twrp is up to date for d2tmo, and make sure the rom you are flashing is 4.3 or later. I'm pretty sure that once you're on the latest 4.3 rom you can't flash anything lower
Click to expand...
Click to collapse
Got the latest TWRP running, but still the same issue trying to flash OctOS M, PACROM 5.0.1, etc.
wmzed said:
Got the latest TWRP running, but still the same issue trying to flash OctOS M, PACROM 5.0.1, etc.
Click to expand...
Click to collapse
That's strange, I'm using 3.0.2.0 and the latest 999L baseband and I haven't had any issues with flashing.
I'm Using the MM pac rom but I've tried CM14.1 nightly builds with no problem
ratchetrizzo said:
That's strange, I'm using 3.0.2.0 and the latest 999L baseband and I haven't had any issues with flashing.
I'm Using the MM pac rom but I've tried CM14.1 nightly builds with no problem
Click to expand...
Click to collapse
I have finally managed to figure it out. You need to completely format the entire ROM currently installed from your phone. Once that is done, you can add any ROM to install properly. I'm running well on OctOS-N 3/17/2017 build.
Thanks all for your help.

Rom not getting past installing system

hey guysim having an issue, recently i bricked my phone to the point where it askes for a md5 check on system but i fixed it and got it booting now. my issue is any liniage os rom wont get past the system install part on twrp, it just stays stuck and never moves on past it. any fixes? i used the method 2 on mega unbrick guide to get my phone up and running again.
Did you install the required firmware? Since after the unbrick tool yo is ill be at 3.2.2 I think.
Puddi_Puddin said:
Did you install the required firmware? Since after the unbrick tool yo is ill be at 3.2.2 I think.
Click to expand...
Click to collapse
link?
shadowcreeper_1 said:
link?
Click to expand...
Click to collapse
Google it, i can send u links and stuff but it is good to know what you need to install before you do anything. Also there is a search tool in every topic.
Puddi_Puddin said:
Google it, i can send u links and stuff but it is good to know what you need to install before you do anything. Also there is a search tool in every topic.
Click to expand...
Click to collapse
same thing happened with another oneplus 3 my friend has its not installing roms, it stays stuck on installing system
shadowcreeper_1 said:
same thing happened with another oneplus 3 my friend has its not installing roms, it stays stuck on installing system
Click to expand...
Click to collapse
Hmm. Wrong twrp? Try Blu_spark V15 by eng.stk
Did you read how to instal? What to flash, to have a working rom?
null0seven said:
Did you read how to instal? What to flash, to have a working rom?
Click to expand...
Click to collapse
yes lol but its weird when i installed cr droid and flashed the firmware and modem required to install the rom, it installed the rom but any other rom for example aicp, or legend rom it wont go past installing system on twrp ive tried the official version and the 3.0.4.0 one also but in flashing that modem & firmware wont connect me to my sim card or wifi, like it glitches out and dost connect to the internet
Puddi_Puddin said:
Hmm. Wrong twrp? Try Blu_spark V15 by eng.stk
Click to expand...
Click to collapse
whats a kernel gonna do?
shadowcreeper_1 said:
whats a kernel gonna do?
Click to expand...
Click to collapse
It's a twrp by eng.stk
For custom roms, not official (Oxygen), you need custom recovery eng-stk, first.
Puddi_Puddin said:
It's a twrp by eng.stk
Click to expand...
Click to collapse
so installing this https://forum.xda-developers.com/oneplus-3/development/kernel-t3404970 will give me a custom twrp? lol im so lost i havent kept up with android dev im still back in the galaxy skyrocket era
shadowcreeper_1 said:
so installing this https://forum.xda-developers.com/oneplus-3/development/kernel-t3404970 will give me a custom twrp? lol im so lost i havent kept up with android dev im still back in the galaxy skyrocket era
Click to expand...
Click to collapse
No, flashing a kernal won't result in a different twrp. BUT inside the kernal downloads he also has a few Twrp releases. You will need this one https://forum.xda-developers.com/devdb/project/dl/?id=22806
Puddi_Puddin said:
No, flashing a kernal won't result in a different twrp. BUT inside the kernal downloads he also has a few Twrp releases. You will need this one https://forum.xda-developers.com/devdb/project/dl/?id=22806
Click to expand...
Click to collapse
i flashed their latest v15 and it still dosnt install my custom rom, the 2 roms im trying is legend rom and aiscp
shadowcreeper_1 said:
i flashed their latest v15 and it still dosnt install my custom rom, the 2 roms im trying is legend rom and aiscp
Click to expand...
Click to collapse
Well then it's not a Twrp issue.. Ask the rom maintainer.

Categories

Resources