Develop Bugs

[TOOL][KK & LP]Titan Firware & Recovery Flasher

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
THIS IS FOR THE ONES WHO DON'T WANT TO COPY PASTE OR FASTBOOT FLASH EVERY IMAGE!!
YOU SHOULD HAVE AN UNLOCKED BOOTLOADER!!!!
Hi, I created this Program so that you can unbrick your moto g 2nd gen, or restore it to the stock firmware! Just run the script and it will do every thing for you!
DISCLAIMER
Code:
IM NOT RESPONSIBLE TO ANYTHING THAT HAPPENS TO YOUR PHONE.
I CANNOT ATTEND THE FUNERALS OF YOUR PHONES.
Anyways, xt1068 users can neglect the disclaimer as it has been tested on it.
And xt106x users can also try it, if you have all the firmware files with you. (read on, you'll get it)
INSTRUCTIONS
1.DOWNLOAD THE exe file(LP OR KK)
2.COPY IT INTO THE FOLDER WHERE YOU HAVE EXTRACTED YOUR FIRMWARE
3.RUN THE EXE FILE
4.OPEN README.TXT AND READ IT. THERE'S A LIST OF FILES YOU REQUIRE IN IT.
5.BOOT YOUR PHONE INTO BOOTLOADER MODE, PLUG IT IN AND CONTINUE.
6.SELECT IF YOU WANT TO LOCK BOOTLOADER OR NOT.
7.EXE WILL DO THE TALKING
8.SELECT IF YOU WANT TO FLASH A CUSTOM RECOVERY (CWM/PHILZ)
8.ENJOY!!
NOTE: IF YOU HAVE SELECTED TO LOCK BL AND YOU GET STUCK IN A BOOTLOOP, RUN RunThisIfYourPhoneDoesntBootAfterBLlock.bat as administrator
DOWNLOADS
FIRMARES (I DO NOT own them)
[just try to find your firmware and i recommend downloading it using Advanced Download Manager(android). Keep no. of Download parts to 9 and auto resume on under download section of slidebar.]
Tool under download tab.
CREDITS
To me for the LOGO
HIT THANKS IF I COULD HELP!! ITS FREE OF COST, YOU KNOW
XDA:DevDB Information
[TOOL][KK & LP]Titan Firmware And Recovery Flasher, Tool/Utility for the Moto G 2014
Contributors
Vidhanth
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2015-05-02
Created 2015-05-06
Last Updated 2015-05-06

CHANGES
Reserved

Thanks for your work. This tool work for downgrade lollipop to Kk?

gmpdri said:
Thanks for your work. This tool work for downgrade lollipop to Kk?
Click to expand...
Click to collapse
Will work from anywhere. You can flash this on any rom. The only thing is you should be able to boot into bootloader mode.:thumbup:

Vidhanth said:
Will work from anywhere. You can flash this on any rom. The only thing is you should be able to boot into bootloader mode.:thumbup:
Click to expand...
Click to collapse
Hi i have locked bootloader, can i use this for downgrade from Lollipop at kitkat or i will fist unlock bootloader? Thanks

realshaoran said:
Hi i have locked bootloader, can i use this for downgrade from Lollipop at kitkat or i will fist unlock bootloader? Thanks
Click to expand...
Click to collapse
I'm not sure is you should have an unlocked bootloader for this. Anyways, I guess it should work. You can try.

I don't have never unlock the bootloader, my moto g is All stock...

realshaoran said:
Hi i have locked bootloader, can i use this for downgrade from Lollipop at kitkat or i will fist unlock bootloader? Thanks
Click to expand...
Click to collapse
you will need a unlocked boot loader

reefuge said:
you will need a unlocked boot loader
Click to expand...
Click to collapse
Oh... Well, thanks you.

you sure you tried this ?
i just downloaded RETAILDSDSALL_XT1068_5.0.2_LXB22.46-28_cid7_CFC.xml this has 5 system.img_sparsechunk files and this script only flashes 4 ! would it not cause bootloop
Mirror to the firmware RETAILDSDSALL_XT1068_5.0.2_LXB22.46-28_cid7_CFC.xml : https://drive.google.com/file/d/0B4wmYm0bnkUAczZOckpBQkhuSms/view?usp=sharing
This is for XT1068 working ,flashed over soaktest. (used manual script)

I think it's obvious that the OP was refering to flashing stock Kit Kat firmware. After all the thread was started a couple of days ago, and the lollipop firmware was uploaded 6-7 hours ago.

notanoob said:
you sure you tried this ?
i just downloaded RETAILDSDSALL_XT1068_5.0.2_LXB22.46-28_cid7_CFC.xml this has 5 system.img_sparsechunk files and this script only flashes 4 ! would it not cause bootloop
Mirror to the firmware RETAILDSDSALL_XT1068_5.0.2_LXB22.46-28_cid7_CFC.xml : https://drive.google.com/file/d/0B4wmYm0bnkUAczZOckpBQkhuSms/view?usp=sharing
This is for XT1068 working ,flashed over soaktest. (used manual script)
Click to expand...
Click to collapse
Ok, I'll add a script for flashing lollipop firmware also. And will also update the OP.:thumbup:
And thanks for informing.

What is this 5.0.2 image?
It's user made or is the official image from motorola? @Vidhanth

Hey man, i'd loved this post.
Thank you for your efforts taking this possible, i just wanna ask you if you could upload this file "RETBR_XT1068_5.0.2_LXB22.46-28_cid12_CFC.xml.zip" into a best cloud storage service like dropbox or megaupload.. . it just because i tried download it 3 times =\ and it fail, stuck on 60% at 30kbps
Also could you provide the Md5 of this file please?

raz0r1991 said:
Hey man, i'd loved this post.
Thank you for your efforts taking this possible, i just wanna ask you if you could upload this file "RETBR_XT1068_5.0.2_LXB22.46-28_cid12_CFC.xml.zip" into a best cloud storage service like dropbox or megaupload.. . it just because i tried download it 3 times =\ and it fail, stuck on 60% at 30kbps
Also could you provide the Md5 of this file please?
Click to expand...
Click to collapse
Ok, so is the file on file factory? If yes, I have the secret to download that file from file factory.
Download Advanced Download Manager from the Play Store.
Under download settings, change all preferences like in the screenshot.
Then start the download and keep it downloading overnight.( only because that's the time we have the most patience)
Wake up, and you'll have the file downloaded!

Just for make sure, i need to unlock my bootloader and install TWRP recovery?
I've found TWRP 2.8.4.0 for titan, should it work?

raz0r1991 said:
Just for make sure, i need to unlock my bootloader and install TWRP recovery?
I've found TWRP 2.8.4.0 for titan, should it work?
Click to expand...
Click to collapse
Maybe unlocking bootloader is necessary but twrp is not necessary. And that's for sure:thumbup:

Updating op with serious info. Pls do read.
Update: Done. Updated op

I read the OP again, but could not see any change, what did you have fixed?

raz0r1991 said:
I read the OP again, but could not see any change, what did you have fixed?
Click to expand...
Click to collapse
Only mentioned that the bootloader has to be unlocked

[ROM] [5.1.1] Flyme OS 4.5.4.4R for Lenovo Vibe Z2 Pro/K920

How to install :
1.go to recovery (TWRP recovery or cwm recovery)
2.wipe , or Factory reset
3.Flash ROM
4.Reboot
5.Done
ROM download
https://mega.nz/#!KkcDlTbQ!Lv2YUnDTZMvXH6y-U3_L_WIcRMLGGwgw3z-s3eSL1-I
notice: Don't care about "Unable to mount" In the process of the flash,And then directly to restart, The first boot needs six minutes Please be patient
Version Information
Version: 4.5.4.4R
Stable Release Date: 2016-01-14
Created 2015-12-10
Last Updated 2015-01-14
ScreenShots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

great! i was waiting for you to publish this here
EDIT: i can make a mirror on androidfilehost if you want

frantisheq said:
great! i was waiting for you to publish this here
EDIT: i can make a mirror on androidfilehost if you want
Click to expand...
Click to collapse
Tried flashing with TWRP. It said "wait for 3 minutes" and then the flash failed with the error message "Unable to mount". Device when connected to Laptop showed that the Storage is full. I could not access storage on Mobile and could not copy any file from laptop to Device. Had to rescue my device by QFIL flashing of S246. Now I am getting back to the best 12.1 CM ROM of yours. It is better for starters to wait for the report of experienced users who are good in testing custom ROMs. Is it by any chance for Chinese Device? My mobile is ROW version.

ganapathyraman_s said:
Tried flashing with TWRP. It said "wait for 3 minutes" and then the flash failed with the error message "Unable to mount". Device when connected to Laptop showed that the Storage is full. I could not access storage on Mobile and could not copy any file from laptop to Device. Had to rescue my device by QFIL flashing of S246. Now I am getting back to the best 12.1 CM ROM of yours. It is better for starters to wait for the report of experienced users who are good in testing custom ROMs. Is it by any chance for Chinese Device? My mobile is ROW version.
Click to expand...
Click to collapse
ok! thanks In our country to visit xda BBS very slowly

ganapathyraman_s said:
Tried flashing with TWRP. It said "wait for 3 minutes" and then the flash failed with the error message "Unable to mount". Device when connected to Laptop showed that the Storage is full. I could not access storage on Mobile and could not copy any file from laptop to Device. Had to rescue my device by QFIL flashing of S246. Now I am getting back to the best 12.1 CM ROM of yours. It is better for starters to wait for the report of experienced users who are good in testing custom ROMs. Is it by any chance for Chinese Device? My mobile is ROW version.
Click to expand...
Click to collapse
Don't care about "Unable to mount".，
Directly to restart the boot
The first boot needs six minutes

a396889843 said:
Don't care about "Unable to mount".，
Directly to restart the boot
The first boot needs six minutes
Click to expand...
Click to collapse
Thanks. Before switching back to CM, i did reboot into System from TWRP. The logo animation was on for long and I am sure that i waited for close to 10 minutes. However, i will give it one more try later when i find time.

ganapathyraman_s said:
Thanks. Before switching back to CM, i did reboot into System from TWRP. The logo animation was on for long and I am sure that i waited for close to 10 minutes. However, i will give it one more try later when i find time.
Click to expand...
Click to collapse
I just tried it, proved it can run

frantisheq said:
great! i was waiting for you to publish this here
EDIT: i can make a mirror on androidfilehost if you want
Click to expand...
Click to collapse
Ok, can you help me

Hi a396889843!
May i ask What are the known bugs of this rom? Thanks!

Hello, what are the supported languages? All the same as in pure Android 5.1.1?
Thanks
c.x

clone.x said:
Hello, what are the supported languages? All the same as in pure Android 5.1.1?
Thanks
c.x
Click to expand...
Click to collapse
Support multi-language,Unlike native android

vince_junior said:
Hi a396889843!
May i ask What are the known bugs of this rom? Thanks!
Click to expand...
Click to collapse
Temporarily didn't find

a396889843 said:
Temporarily didn't find
Click to expand...
Click to collapse
Nfc, fm radio, double tap to wake working?

MEGA link is horrible. Download speeds are 50 KBps. Please host on androidfilehost.com.

k920 CHINESE VERSION OWNER
Hi, can i install flyme into my chinese version k920 phone? Are there any bugs?
Thanks in advance

prototipo69 said:
Hi, can i install flyme into my chinese version k920 phone? Are there any bugs?
Thanks in advance
Click to expand...
Click to collapse
Yes, you can. The bugs are similar to CM: HDR and Flip Cover not working.

its stock at flyme logo and optimizing app over and over
what the wheck is this ??

ju do a full wipe, install and wait for the first time

frantisheq said:
ju do a full wipe, install and wait for the first time
Click to expand...
Click to collapse
retried and after choose the file this error occurred :
mount : failed to mount / dev/block/platform/msm_sdcc.i/by-name/ system at /system: device or resource file busy

I do not know how to download? I click on the link and open the app with my Mega empty account. Does anyone have any other resource in the firmware? Or help me understand on mega please
Отправлено с моего K920 через Tapatalk

Multiboot for Wileyfox Swift

Multiboot for Wileyfox Swift
It is not my work. Credits to 4pda and to Fedor917
All taken from http://4pda.ru/forum/index.php?showtopic=667513&st=4700#entry47705403
More instructions also here
http://forum.xda-developers.com/showthread.php?t=2447534
1- You must be rooted and you must have TWRP 3.0.0
Instructions on how to
http://forum.xda-developers.com/wileyfox-swift/general/twrp-3-0-0-0-t3311572
2- Your primary ROM is the one you are using now
3- Download and install the below Dual Patcher
https://cloud.mail.ru/public/BGux/BDb7PSxUp
4- Give SuperSU rights to the application and if requested to install the kernel say yes.
4- Go to the "Patch ROM" to select a file, choose your device, and the slot where the firmware will be installed. I chose data slot since I had problems with extsd. Do the same for gapps if needed by the rom choosing the same slot
5- Reboot into recovery (TWRP 3)
6- Install the patched firmware and patched gapps if needed.
7- After flashing reboot ( no need to wipe anything)
8- You will be rebooted into the new Rom
9- Install in the new ROM the Dual Patcher
10- Open the Dual patcher and you can select from the ROM selection the rom you want to reboot
That's all. Now you can log in to another system by switching the firmware in the tab "Firmware" Using Dual Boot Patcher.
You can also add a third rom.
I have
Primary the stock Cyanogen
Second Temasek’s Rom and
Third Miui 7
Also read in the xda thread on how you can share the applications
Good Luck and I am not responsible for any damage to your device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thank you

Thanks . Now I can use MIUI with CM13 #BestOfBoth

yasteellutch said:
Thanks . Now I can use MIUI with CM13 #BestOfBoth
Click to expand...
Click to collapse
Where you have installed Miui and which version?
Miui has problem on multiboot and never try to patch zip through Miui

mermigas said:
Where you have installed Miui and which version?
Miui has problem on multiboot and never try to patch zip through Miui
Click to expand...
Click to collapse
Hey I tried it . Well it failed miserably due to me trying many Roms. Phone was stuck on boot lol. Luckily I made a backup
---------- Post added at 05:41 AM ---------- Previous post was at 05:39 AM ----------
If someone can make a kernel with the kexec hardboot patch then I can try and port Multirom with a custom TWRP which makes a primary and secondary ROM prebuilt

hi. i installed miui via multiboot. there wasn't problem. maybe you made a mistake ?

Won't work with me, when I patch it says " failed code error 211" I look up in the internet but I didn't find anything, can you help me please ?

Rekonva said:
Won't work with me, when I patch it says " failed code error 211" I look up in the internet but I didn't find anything, can you help me please ?
Click to expand...
Click to collapse
i'll try again. if i can patch it, i'm going to upload patched rom.
edit: i've patched miui 6.1.28 for data slot. i will upload if you want.

thanks alot, but I want to know what is the problem with my device ? I tried cyanogenmod 13.0 nightly and another rom and it doesn't patched.

Rekonva said:
Won't work with me, when I patch it says " failed code error 211" I look up in the internet but I didn't find anything, can you help me please ?
Click to expand...
Click to collapse
Rekonva said:
thanks alot, but I want to know what is the problem with my device ? I tried cyanogenmod 13.0 nightly and another rom and it doesn't patched.
Click to expand...
Click to collapse
https://yadi.sk/d/-JVbYjTSqELSi here you got, patched miui 6.1.28

Can you make it for Wileyfox Storm? plzz

I installed Cyanogenmod 13, it boots but I can't get past the lock screen. Am I screwed if I want to switch my rom back to stock?

Anyone using multiboot with Android N Developer Preview [DEV][N][DP2][CRACKLING]? I see no chance to get this running, because TWRP wont find the N-System (because the system uses squashfs file compression which seems to be uncompatible with TWRP) and so i cant get root working in Android N.

Slim6+cm13= awesomeness!
Everything works great!

Can you do this with an old OS? eg Nougat + Marshmallow?

Has anyone been able to use multiboot on Cosmic/Cardinal/crDroid (all 8.1) and LineageOS 14.1 or 15.0? Mine bricks every single time, I flash the ROM successfully but when I reboot it vibrates 3 times and won't boot till I reflash either of the ROMs as the primary

[RECOVERY][SCORPIO] TWRP 3.2.1-0 v2 Touch Recovery for Mi Note 2 [26.02.2018]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TEAM WIN
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
DOWNLOAD
TWRP 3.2.1-0 v2
CHANGELOG
TWRP Changelog
INSTRUCTIONS
From fastboot:
Code:
fastboot flash recovery filename.img
From TWRP:
- Install>Flash Image>"Select the recovery to flash">Swipe To flash>Reboot Recovery
NOTE: If the recovery asks you for a password, you have to erase the /data partition. So press "Cancel" and then Wipe>Format Data>"yes" to fully decrypt your phone. Note that a decrypted phone will boot more faster and will improve the FS speed.
THIS WILL ERASE YOUR INTERNAL STORAGE
F.A.Q
Q: Can i flash MIUI ROMS with this recovery?
A: Yes, you can. If you flash an official MIUI ROM, you have to flash Magisk or Boot Image Patcher too, to disable the dm-verity and forced encryption.
Q: Can i flash custom ROMS with this recovery?
A: Yes, you can. This recovery is Oreo ready too.
Source Code: GitHub​

Just thanks @Psy_Man, you are the best bringing news for MI Note 2.
And as always waiting for Oreo.

Works just fine on my Mi Note 2. Thank you!

Nice to see the new Twrp on our device. Thank you very much and keep up the good work !

Do i need to format it in order to decrypt?

Andrikkos said:
Do i need to format it in order to decrypt?
Click to expand...
Click to collapse
Yes! Backup your data first!

Nice ! The new version is already up ! Thank you for all the work you are doing , you are amazing !

You are the best @Psy_Man thank you very much.

3.2.1 cant load ..

Andrikkos said:
3.2.1 cant load ..
Click to expand...
Click to collapse
Broken download. Check the md5 before flashing somethimg.

Pixel Expiriance
When are you making that rom working ?

dont work for me ...
reboot on recovery ok , fastboot ok but no reboot on rom ???

dglingos said:
dont work for me ...
reboot on recovery ok , fastboot ok but no reboot on rom ???
Click to expand...
Click to collapse
What?

I'm having problems flashing official roms trought recovery, I don't know why. It seems to flashing ok but when the phone reboots it doesn't loads it got stucks at MI logo and nothing happens. Does anybody has this problem?

jorvacf said:
I'm having problems flashing official roms trought recovery, I don't know why. It seems to flashing ok but when the phone reboots it doesn't loads it got stucks at MI logo and nothing happens. Does anybody has this problem?
Click to expand...
Click to collapse
As i know , PsyMan said in the thread that when you install the official rom you need to flash either Magisk either Boot Image Patcher for it to boot.

Hi, this twrp version asks for a password (for decrypt purpose) ; why ? There was no password prompted in 3.1.0.0 .. My Mi Note 2 is not encrypted and obviously I don't want to format /data.

niczob said:
Hi, this twrp version asks for a password (for decrypt purpose) ; why ? There was no password prompted in 3.1.0.0 .. My Mi Note 2 is not encrypted and obviously I don't want to format /data.
Click to expand...
Click to collapse
Then flash 3.1.1 again and problem solved. Also , your data is password protected and everytime you start your rom it has to take some time to "unlock" your data partition. This way , if you format woth the new twrp, you will have a great increase in bootup speed.

alexmanu1 said:
As i know , PsyMan said in the thread that when you install the official rom you need to flash either Magisk either Boot Image Patcher for it to boot.
Click to expand...
Click to collapse
Let me see if I understand, I need to flash magisk and also boot imagen patcher? Where can I get this last one (boot imagen patcher) and it has to be done after flashing the ROM without restarting it?

jorvacf said:
Let me see if I understand, I need to flash magisk and also boot imagen patcher? Where can I get this last one (boot imagen patcher) and it has to be done after flashing the ROM without restarting it?
Click to expand...
Click to collapse
One of them . I recommend Magisk , don't really know which boot image patcher should we install.

jorvacf said:
I'm having problems flashing official roms trought recovery, I don't know why. It seems to flashing ok but when the phone reboots it doesn't loads it got stucks at MI logo and nothing happens. Does anybody has this problem?
Click to expand...
Click to collapse
I have the same problem

[RECOVERY] [OrangeFox]&[TWRP][Galaxy A01][SM-015F]

CUSTOM RECOVERY SM-A015F​
​
Here is two custom recovery for Samsung galaxy A01 [SM-A015F] TWRP and OrangeFox built from source .
Most every thing is working fine .
Note : ​-before you install this custom recoveries you must be familiar with ODIN TOOL and Samsung flashing ( any wrong operation may broke your device)
-always make a copy of your stock recovery in case...
-unlock your bootloader and disable AVB
Credits
* TeamWin - for TWRP
* The OrangeFox Team
LeonelArtuzi for the device tree
*My work for building
Device Tree : Here.​Download :​- OrangeFox recovery​- TWRP recovery ​
* you can leave your questions or suggessions in comments
* dont forget to hit like

abh_tn said:
CUSTOM RECOVERY SM-A015F​
​
Here is two custom recovery for Samsung galaxy A01 [SM-A015F] TWRP and OrangeFox built from source .
Most every thing is working fine .
Note : ​-before you install this custom recoveries you must be familiar with ODIN TOOL and Samsung flashing ( any wrong operation may broke your device)
-always make a copy of your stock recovery in case...
-unlock your bootloader and disable AVB
Credits
* TeamWin - for TWRP
* The OrangeFox Team
LeonelArtuzi for the device tree
*My work for building
Device Tree : Here.​Download :​- OrangeFox recovery​- TWRP recovery​
* you can leave your questions or suggessions in comments
* dont forget to hit like
Click to expand...
Click to collapse
no permissson to download

change link permissions

Sorry, i will do soon ,i didnt know

(Sri Lanka) said:
no permissson to download
Click to expand...
Click to collapse
Try now

Fggevhy said:
change link permissions
Click to expand...
Click to collapse
Try now

Starting the tests with the installation of some GSI, thanks for your work.

Reick7 said:
Starting the tests with the installation of some GSI, thanks for your work.
Click to expand...
Click to collapse
You are welcome.

abh_tn said:
You are welcome.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I got this...

dont work for me...

Reick7 said:
dont work for me...
Click to expand...
Click to collapse
Look flash and use orangefox recovery I am Shure it is full working , for Twrp i may shared a wrong version , i will soon test and share the good one , i m really sorry, dont forget to rename the file to recovery.tar.md5

dont worry if you are stuck in recovery because of mounts errors , just reboot to download mode and flash the other recovery ( orangefox) and every thing will be fine, i will sonn fix twrp and share .

abh_tn said:
Look flash and use orangef
Reick7 said:
dont work for me
Click to expand...
Click to collapse
Click to expand...
Click to collapse
dont worry if you are stuck in recovery because of mounts errors , just reboot to download mode and flash the other recovery ( orangefox) and every thing will be fine, i will sonn fix twrp and share .

abh_tn said:
Look flash and use orangef
Reick7 said:
dont work for me
Click to expand...
Click to collapse
Click to expand...
Click to collapse
dont worry if you are stuck in recovery because of mounts errors , just reboot to download mode and flash the other recovery ( orangefox) and every thing will be fine, i will soon fix twrp and share .
please tell me !!!

Reick7 said:
View attachment 5429231
I got this...
Click to expand...
Click to collapse
rename to Recovery.tar.md5

Reick7 said:
dont work for me...
Click to expand...
Click to collapse
this is the new link for TWRP RECOVERY ; i tested before sharing ( dont worry about loop 16 -> 20 errors)

no problems, I just warned that the twrp wasn't working, I've installed another one and I'm doing my tests, is Orange Fox functional to install GSI? and encryption?

Reick7 said:
no problems, I just warned that the twrp wasn't working, I've installed another one and I'm doing my tests, is Orange Fox functional to install GSI? and encryption?
Click to expand...
Click to collapse
Yes it is functional, but if you face an Encyption problem just do a wipe or install an encyption disabler.
Good Luck.

abh_tn said:
Yes it is functional, but if you face an Encyption problem just do a wipe or install an encyption disabler.
Good Lu
Click to expand...
Click to collapse
abh_tn said:
Yes it is functional, but if you face an Encyption problem just do a wipe or install an encyption disabler.
Good Luck.
Click to expand...
Click to collapse
okay, I'll try a few things later, like backup and GSI

Does it work only on A015F? Or all variants?