Info about the phone
I never rooted my phone
A week ago I tried to install February security patch (2016) through system updates.But for some reason it showed error and stuck on it. I waited for half an hour and it was still showing the error screen so, I pulled the battery and started it again. It worked fine for a week .After that, Only thing I couldn't do was to install the same update( It showed the the same error screen) Suddenly, this morning phone rebooted itself and then it's stuck on the marshmallow boot animation.
wipe cache and data
---------- Post added at 03:41 PM ---------- Previous post was at 03:40 PM ----------
wipe cache and data
Yes wipe data factory reset
I am having the same problem with my micromax canvas a1 stuck on boot animation. I wiped data through factory reset in recovery mode, but it didn't work. Should i flash stock ROM to fix the problem ? pls advice........
searching for solution
akshatjain427 said:
I am having the same problem with my micromax canvas a1 stuck on boot animation. I wiped data through factory reset in recovery mode, but it didn't work. Should i flash stock ROM to fix the problem ? pls advice........
Click to expand...
Click to collapse
hello i am also stuck in boot animation after trying a hard reset as i was facing too much error messages of unfortunately application stopped. but after reset phone is not booting. i found you have also faced the same. so did you find out a way???? plz help...:crying:
You may flash the stock rom using sp flash tools. You can download the stock rom from xda-firmware
p19 said:
hello i am also stuck in boot animation after trying a hard reset as i was facing too much error messages of unfortunately application stopped. but after reset phone is not booting. i found you have also faced the same. so did you find out a way???? plz help...:crying:
Click to expand...
Click to collapse
same here
Related
I have a rooted Micromax Canvas A1, few weeks back i had to factory reset it. After resetting, it used to boot and get stuck at select your wifi during initial set up. and then used to freeze (kept it that way for 24hrs) but no success. then i decided to flash it. Now i am stuck with a boot-loop and as the cell was not with me, i dont really know which updates have been installed.
The screen during flashing i get is in d link below
imageshack.com/a/img924/6016/AgioHU.jpg
Click to expand...
Click to collapse
did you flashed custom or stock firmware after factory reset?
Hello,
after experiencing some problems with crashing Galery-app on Stock ROM Android 6.0.1 I decided to do a factory reset.
After factory reset, I got constant android.process.acore and HTC Sense crashed and could not use ANY app nor even see my starting-screen.
I managed to get into the settings and enable USB Debugging. But most of the time, my device did not boot up properly and just showing the HTC-bootscreen. When I pressed volume-up + Power I could reset the phone but was not able to manually power on again. Aso Volume-Down+ Power (To access recovery mode) did not worked anymore.
After getting on low batterie my device turned off and then I was able to access recovery mode again.
I started installing CWM Recovery (Philz touch) which ran fine.
After some unsuccessfull factory resets (same problem as above) I decided to install a custom rom. I choose cm-13.0-20160329-NIGHTLY-m8.zip (Android 6)
The installation process ran fine and I was able to boot normally. Only thing that was wierd: The phone did not recognize my sim-card and I was not able to play any sound. So i dediced to install the latest stable release which was cm-12.1-20151117-SNAPSHOT-YOG7DAO1K1-m8 (Android 5.1)
After installing via adb and rebooting, I had the same problem as mentioned above (bootloop). Naturally, there was the animated CM-Bootlogo showing and not the stock HTC Boot screen.
When I power off via VolumeUp+Power I am NOT able to get into recovery menu via VolumeDown+Power, instead I have to wait till my phone powers up on its own (Which will lead to a bootloop again)
Is there any way to get the device working again?
Thank you!
EDIT: Also it is running really hot while in bootloop.
EDIT2: my battery ran out of energy and I managed to get into recovery mode again. installing latest nightly (20160330) now
EDIT3: "Setup Assistent" crashes while startup. Can't get into recoverymode either. dont know why. phone just starts up normally...
Vendaar said:
Hello,
after experiencing some problems with crashing Galery-app on Stock ROM Android 6.0.1 I decided to do a factory reset.
After factory reset, I got constant android.process.acore and HTC Sense crashed and could not use ANY app nor even see my starting-screen.
I managed to get into the settings and enable USB Debugging. But most of the time, my device did not boot up properly and just showing the HTC-bootscreen. When I pressed volume-up + Power I could reset the phone but was not able to manually power on again. Aso Volume-Down+ Power (To access recovery mode) did not worked anymore.
After getting on low batterie my device turned off and then I was able to access recovery mode again.
I started installing CWM Recovery (Philz touch) which ran fine.
After some unsuccessfull factory resets (same problem as above) I decided to install a custom rom. I choose cm-13.0-20160329-NIGHTLY-m8.zip (Android 6)
The installation process ran fine and I was able to boot normally. Only thing that was wierd: The phone did not recognize my sim-card and I was not able to play any sound. So i dediced to install the latest stable release which was cm-12.1-20151117-SNAPSHOT-YOG7DAO1K1-m8 (Android 5.1)
After installing via adb and rebooting, I had the same problem as mentioned above (bootloop). Naturally, there was the animated CM-Bootlogo showing and not the stock HTC Boot screen.
When I power off via VolumeUp+Power I am NOT able to get into recovery menu via VolumeDown+Power, instead I have to wait till my phone powers up on its own (Which will lead to a bootloop again)
Is there any way to get the device working again?
Thank you!
EDIT: Also it is running really hot while in bootloop.
EDIT2: my battery ran out of energy and I managed to get into recovery mode again. installing latest nightly (20160330) now
EDIT3: "Setup Assistent" crashes while startup. Can't get into recoverymode either. dont know why. phone just starts up normally...
Click to expand...
Click to collapse
Yout could try and install TWRP 3.0 and do a factory reset or flas a new Sense Rom.
Vendaar said:
EDIT: Also it is running really hot while in bootloop.
Click to expand...
Click to collapse
That's going to happen. The CPU is working hard during boot, and if its caught in a bootloop, the CPU is getting constantly worked, and heat is the inevitable result.
---------- Post added at 09:38 AM ---------- Previous post was at 09:34 AM ----------
Vendaar said:
When I power off via VolumeUp+Power I am NOT able to get into recovery menu via VolumeDown+Power,
Click to expand...
Click to collapse
Is the phone powering off with Power+vol up; or is it rebooting? It should be rebooting. If its rebooting, the moment the screen goes dark, and before any boot splash screen shows; hold only vol down to access bootloader (don't let go of vol down until you see bootloader).
Failure to get into bootloader this way is usually user error (often the result of not pressing vol down soon enough, or letting go of it too early)
---------- Post added at 09:40 AM ---------- Previous post was at 09:38 AM ----------
jkolner said:
Yout could try and install TWRP 3.0 and do a factory reset or flas a new Sense Rom.
Click to expand...
Click to collapse
I agree to try TWRP. Philz hasn't been updated in a very long time, and is known to cause some issues due to that.
---------- Post added at 09:43 AM ---------- Previous post was at 09:40 AM ----------
Vendaar said:
So i dediced to install the latest stable release which was cm-12.1-20151117-SNAPSHOT-YOG7DAO1K1-m8 (Android 5.1)
After installing via adb and rebooting, I had the same problem as mentioned above (bootloop).
Click to expand...
Click to collapse
Are you doing full wipe (data, Dalvik, cache) when installing new ROMs? This is recommended, and failure to do so will often lead to boot problems on the ROM.
Also, are you installing gapps (Google apps) with the CM ROMs? Failure to do so will also lead to boot issues, or setup assistant crashing (and a lot of other errors during startup). And the CM ROMs can be finicky with some gapps packages.
Thanks for your replies!
redpoint73 said:
Failure to get into bootloader this way is usually user error (often the result of not pressing vol down soon enough, or letting go of it too early)
Click to expand...
Click to collapse
I pressed both about 10+ seconds. Guess it was my error then.
redpoint73 said:
Are you doing full wipe (data, Dalvik, cache) when installing new ROMs? This is recommended, and failure to do so will often lead to boot problems on the ROM.
Click to expand...
Click to collapse
I did not do a full wipe then . Thought deleting cache will also delete dalvik cache. I did only delete data+cache
redpoint73 said:
Also, are you installing gapps (Google apps) with the CM ROMs? .
Click to expand...
Click to collapse
Yes, I booted to recovery, and used sideload to first push CM and afterwards gapps to the phone.
jkolner said:
Your could try and install TWRP 3.0 and do a factory reset or flas a new Sense Rom.
Click to expand...
Click to collapse
Okay. I will now install TWRP 3.0, do a full reset (data, dalvik, cache) and flash the latest CM. Thank you very much!
Android is now booting well. Thank you
Next problem i'm running into: can't play any audiofile. Ringtones dont work either. My phone isn't doing any beep. videos do not work and Gallery-app is crashing instantly. Also my equalizer AudioFX.
Errors, I get are:
Music-App
[CRASH] com.cyanogenmod.eleven threw java.lang.IllegalStateException
Gallery crash:
[CRASH] com.android.gallery3d threw java.lang.RuntimeException
Audiofx:
[CRASH] org.cyanogenmod.audiofx threw java.lang.IndexOutOfBoundsException
I researched some time but did not found anything useful here
EDIT: New problem:: SIM is not recognized by phone anymore. It worked on first boot..
Edit2: cant even hear sound over headphones.
updated to latest nightly. Did not resolve anything.
Bump.
Updated to latest nightly and cleared cache + dalvik before. didn't solve my problem either
Bump
Sent from my m8 using XDA-Developers mobile app
Hello guys,
I cant use my phone, i performed a factory reset and now its stuck in "Android is starting, optimizing app 47 of 47", the thing is that after finishing optimization, the phone reboots by itself again and again...
I know its a software issue but i cant find the damn ruu!!
¿Any ideas or help?
conquesoextra said:
Hello guys,
I cant use my phone, i performed a factory reset and now its stuck in "Android is starting, optimizing app 47 of 47", the thing is that after finishing optimization, the phone reboots by itself again and again...
I know its a software issue but i cant find the damn ruu!!
¿Any ideas or help?
Click to expand...
Click to collapse
is that stock or custom rom?
if stock then do reset again & wipe dalvik cache, cache then restart
if on custom then reflash custom rom
I tried to update to the latest update to the Razer Phone and was able to install it successfully, but when I went to install Magisk on the new update, it caused the Wifi to stop working. For that reason, I tried to restore my old TWRP backup I made prior to updating which everything was working before updating. I wiped cache, dalvik, data and system and restored my old backup. Now when I try to boot, it gets stuck at the Razer logo and doesn't get past that. I also tried wiping data and restoring the system image only to no avail and it didn't do anything.
Have you tried booting to TWRP and booting The other [email protected]
How long did you wait on the Razer logo.. When I reset my phone after relocking it.. It took 10+min for first boot. I was scared it wasn't gonna work but I just left it alone and it eventually booted itself up
mikeandjaimie said:
How long did you wait on the Razer logo.. When I reset my phone after relocking it.. It took 10+min for first boot. I was scared it wasn't gonna work but I just left it alone and it eventually booted itself up
Click to expand...
Click to collapse
Thanks. I'll try that and see if it works. But I let it sit for 5 or so minutes.
Edit: I'll go ahead and add it was stuck at the Razer logo. It never got to the actual boot animation.
Edit 2: I let it sit for 20+ minutes and it wouldn't boot or get past the Razer logo.
RUNNERX said:
Have you tried booting to TWRP and booting The other [email protected]
Click to expand...
Click to collapse
Yes I've tried switching slots and it didn't work.
Any luck with the stuck at logo screen? I followed instructions from Razer and fkashall and now it won't boot to recovery download or system . It just hangs at the logo screen for better part of 2 hours now so it's not a waiting game .. any luck in fixing yours?
hi there, same here after flashing google pixel experience on razer phone1. seems to be a general problem for many users. Any hints?
Best regards
Michael
I have the same problem, but I wasn't updating or installed any new app. I was just ordering food from an app and then all of a sudden my phone restared and got stuck in a bootloop.
I reflashed the stock rom, over and over, slot a or slot b, hoping that would fix it somehow... it's just stuck there now. I could go into download mode and recovery mode. but, it's only until there.
now it's bootloop until it gets into download mode...
ThatGuy94 said:
I tried to update to the latest update to the Razer Phone and was able to install it successfully, but when I went to install Magisk on the new update, it caused the Wifi to stop working. For that reason, I tried to restore my old TWRP backup I made prior to updating which everything was working before updating. I wiped cache, dalvik, data and system and restored my old backup. Now when I try to boot, it gets stuck at the Razer logo and doesn't get past that. I also tried wiping data and restoring the system image only to no avail and it didn't do anything.
Click to expand...
Click to collapse
I could fix it. After flashing (even Android Pi) you have to do a factory reset.
IMPORTANT: THE FACTORY RESET IN TWRP DOES NOT WORK. So you have to flash the boot-sector in your system partition with the stock boot.img and reset to STOCK RECOVERY by typing "fastboot reboot" and pressing the vol-up button. Once in stock recovery, do a factory reset and return to bootloader. Now you can flash the boot.partition with twrp boot.img, install in recovery the stock boot.img, install the twrp-installer.zip and reboot to system. The bootlogo will not stuck anymore.
I hope, I could help you. Do not forget to backup before trying.
Best regards
Mellus
sry for my bad english
I was on AEX and tried a new roms (Pixys, Evolution, Pixel Experience etc) and none of them booted the android.
Tried to restore AEX and even that is not booting. Phone keeps rebooting in loop without booting to any os including the restored backup.
Evolution and pixel after a clean installation says "no os".
Phone stays in start mode and does not move beyond this point.
Phone boots to twrp recovery.
Any idea what is wrong? Have corrupted the phone that it can't be used?
Is there a way out?
Quick solution would be highly appreciated.
Thanks
Anyone has a solution/suggestion for this?Deperate now since there is no alternate phone.
Thanks again
The phone boots recovery and adb commands work whereas fastboot commands don't work. I am able to flash vendor2factory and rom successfully with no error but the phone still not boot android but vibrates and goes back start screen and if i don't press any keys it restarts again after showing the ZUK logo.
I hope i have been able to explain the situation. I am still not able to boot the android despite trying more than one rom.
Anyone has any clues? Thanks
ramadurair said:
I was on AEX and tried a new roms (Pixys, Evolution, Pixel Experience etc) and none of them booted the android.
Tried to restore AEX and even that is not booting. Phone keeps rebooting in loop without booting to any os including the restored backup.
Evolution and pixel after a clean installation says "no os".
Phone stays in start mode and does not move beyond this point.
Phone boots to twrp recovery.
Any idea what is wrong? Have corrupted the phone that it can't be used?
Is there a way out?
Quick solution would be highly appreciated.
Thanks
Click to expand...
Click to collapse
I am having the same problem. I was in pixel experience and i flashed latest pixel experiences august security patch, it showed no os but it booted. But there were several bugs in the rom, i thought it was roms problem and then i tried to flash evolution, it again showed no os after flashing and then i got stuck at evolution x boot logo. So, i tried to qfil zui but to no avail, the flashing process won't even start the qpst tool just freezes after pressing the download button. Then in the twrp i noticed that battery percentage is different at different times sometimes it shows correct value but somes it won't so i thought that the problem might be from twrp and then i flashed new twrp but again same problem. Then i flashed arrow os 10.0 without gapps, it booted successfully then i flashed gapps. After sometime i tried to flash evolution x but got stuck at boot logo again. Finally i flashed arrows os again it booted successfully (i flashed rom and gapps separetly)
So, FINALLY THE TEMPORARY SOLUTION IS TO FLASH ARROW OS IT WILL BOOT SUCCESSFULLY BUT THEN AGAIN OTHER ROMS WON'T BOOT. IF I FIND ANY SOLUTION I WILL POST HERE
muralee krishna said:
I am having the same problem. I was in pixel experience and i flashed latest pixel experiences august security patch, it showed no os but it booted. But there were several bugs in the rom, i thought it was roms problem and then i tried to flash evolution, it again showed no os after flashing and then i got stuck at evolution x boot logo. So, i tried to qfil zui but to no avail, the flashing process won't even start the qpst tool just freezes after pressing the download button. Then in the twrp i noticed that battery percentage is different at different times sometimes it shows correct value but somes it won't so i thought that the problem might be from twrp and then i flashed new twrp but again same problem. Then i flashed arrow os 10.0 without gapps, it booted successfully then i flashed gapps. After sometime i tried to flash evolution x but got stuck at boot logo again. Finally i flashed arrows os again it booted successfully (i flashed rom and gapps separetly)
So, FINALLY THE TEMPORARY SOLUTION IS TO FLASH ARROW OS IT WILL BOOT SUCCESSFULLY BUT THEN AGAIN OTHER ROMS WON'T BOOT. IF I FIND ANY SOLUTION I WILL POST HERE
Click to expand...
Click to collapse
Now the phone is not even booting into recovery after i did a qfil install on zui rom. Looping into start screen only.
ramadurair said:
Now the phone is not even booting into recovery after i did a qfil install on zui rom. Looping into start screen only.
Click to expand...
Click to collapse
When you qfil, the recovery will be lost i think. But since you cannot enable usb debugging i think you wont be able to flash twrp.
---------- Post added at 07:26 AM ---------- Previous post was at 07:19 AM ----------
ramadurair said:
Now the phone is not even booting into recovery after i did a qfil install on zui rom. Looping into start screen only.
Click to expand...
Click to collapse
I think the problem is our phone is not able to boot big rom i.e. roms of size close to 1gb or more than 1gb since arrow os without gapps is only 600mb my phone is able to boot. If you are able to find the solution or get your phone repaired at any cell repair centre please let me know
bro is your phone working now