STOCK ROM
NOKIA X
Code:
#define warning
[LIST]
[*] Your warranty is now void if you are in xda
[*] I am not responsible for bricked devices, thermonuclear war, or you getting fired because the device turned into a nuclear war machine
[*]Please do lot of research to how to backup up or restore bricked device
[*]As for my info this ROM is stock ROM of mentioned device and does not contain any bug.
[/LIST]
Introduction
Nokia x Stock ROM for those who don't want to waste money to go to Nokia centre
Do not flash it to another Nokia device set! You have been warned.
If you are coming from Initial L ROM then don't blame me for wifi.You have to flash persist.img to persist partition search the threads for info
TWRP 2.8 is recommended for flashing
Download:
Nokia x STOCK ROM
Boot.img STOCK
Install instructions
Boot into recovery/twrp (search on thread, how to do it)
Wipe /system /data /cache /dalvik from wipe menu
Flash "Nokia_x_Stock_Rom.zip" and again flash it.
After flashing STOCK ROM, flash boot.zip
If TWRP shows No OS installed then flash the zip again.
Reboot and remember flash the zip twice.
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits
Thanks to YSH ALSAGER for sharing Partition details
All devs for helping me in updater-scripts
matrixex for making ROM
@hooooossamqfor fixing SENSORS
About ROM
Status: Stable
Build see build.prop
ROM version: 1.2.4.3
Proximty sensor not working.any help to make it work? Or any another stock rom flashble by cwm?
---------- Post added at 06:54 AM ---------- Previous post was at 06:47 AM ----------
By the way its great and super fast.i used v1.2.4.1 before. This rom is 1.2.4.3. Its better than what i used b4.thank you alot.but i hope you can make proximity sensor working
hooooossamq said:
Proximty sensor not working.any help to make it work? Or any another stock rom flashble by cwm?
---------- Post added at 06:54 AM ---------- Previous post was at 06:47 AM ----------
By the way its great and super fast.i used v1.2.4.1 before. This rom is 1.2.4.3. Its better than what i used b4.thank you alot.but i hope you can make proximity sensor working
Click to expand...
Click to collapse
Accidentally duplicated below quote
hooooossamq said:
Proximty sensor not working.any help to make it work? Or any another stock rom flashble by cwm?
---------- Post added at 06:54 AM ---------- Previous post was at 06:47 AM ----------
By the way its great and super fast.i used v1.2.4.1 before. This rom is 1.2.4.3. Its better than what i used b4.thank you alot.but i hope you can make proximity sensor working
Click to expand...
Click to collapse
Thank you for testing.
i will fix Proximty sensor
Edit
BRO PROXIMITY SENSOR WORKING fine there is no bug in the ROM
Oh..ok brother.i hope you will do well in you exam.i hit thanks.thank u so much agine
---------- Post added at 08:26 AM ---------- Previous post was at 08:14 AM ----------
I used many roms the proximty sensor working fine with my nokia x.but with this rom its not work.what i shuld do?
---------- Post added at 08:28 AM ---------- Previous post was at 08:26 AM ----------
matrixex said:
Thank you for testing.
i will fix Proximty sensor
Anyway PLEASE HIT THANKS BUTTON :good:
Edit after 2hrs
BRO PROXIMITY SENSOR WORKING fine there is no bug in the ROM
Click to expand...
Click to collapse
I used many roms the proximty sensor working fine with my nokia x.but with this rom its not work.what i shuld do?
WIPE EVERYTHING FROM TWRP RECOVERY twice AND THEN INSTALL THE ZIP
matrixex said:
WIPE EVERYTHING FROM TWRP RECOVERY twice AND THEN INSTALL THE ZIP
Click to expand...
Click to collapse
I did all these but its the same.I have this problem only with the stock roms.with any other roms my proximity sensor work fine.I had change my nokia x board.is that make the proximity sensor not compatable?? Is it about singing the sensor with the board?? Maybe if we delet or replace the singing file of the proximity sensor it will work agine?????
---------- Post added at 10:42 AM ---------- Previous post was at 09:59 AM ----------
Any way what is the files that responsible abut proximty els the sensor_default and sensor_goldfish files in lib\hw folder?any other files?
It will work
Root your X
Delete file sensors.msm7x27a.so in system/lib/hw
Just copy the sensors.msm7x27a.so from system/lib/hw from another rom whose sensors are working with your device move it to the stock rom lib/hw folder through esfile explorer
And REBOOT
DOWNLOAD CPU-Z.apk and check sensors from sensors section
Or
Follow this guide
http://forum.xda-developers.com/nokia-x/general/fax-sensors-cm11-m8-t3197720
I FIX IT.YOU WILL NOT BELIEVE HOW.
I browse by root manger to bin file and delete the psensorcal file.and the file hardwearsensor or I dont remmber exactly the name of the file in etc\premssion folder.I just delet both of them then I copy the sensor_default and sensor_goldfish from kitkat rom to lib\hw folder.then I restart the phone and BWALA!!! Proximity sensor is working .I have do search inside the stock rom file and I found that these 2 files I delete was not found in the other roms files.so I think that these files maybe block the sensor of working fine.alhamdullah its now work
---------- Post added at 12:14 PM ---------- Previous post was at 12:12 PM ----------
matrixex said:
It will work
Root your X
Delete file sensors.msm7x27a.so in system/lib/hw
Just copy the sensors.msm7x27a.so from system/lib/hw from another rom whose sensors are working with your device move it to the stock rom lib/hw folder through esfile explorer
And REBOOT
DOWNLOAD CPU-Z.apk and check sensors from sensors section
Or
Follow this guide
http://forum.xda-developers.com/nokia-x/general/fax-sensors-cm11-m8-t3197720
Click to expand...
Click to collapse
Lol you replaying when i was writing my replay.its woooooork yeaaaa thanks my brother
hooooossamq said:
I FIX IT.YOU WILL NOT BELIEVE HOW.
I browse by root manger to bin file and delete the psensorcal file.and the file hardwearsensor or I dont remmber exactly the name of the file in etc\premssion folder.I just delet both of them then I copy the sensor_default and sensor_goldfish from kitkat rom to lib\hw folder.then I restart the phone and BWALA!!! Proximity sensor is working .I have do search inside the stock rom file and I found that these 2 files I delete was not found in the other roms files.so I think that these files maybe block the sensor of working fine.alhamdullah its now work
---------- Post added at 12:14 PM ---------- Previous post was at 12:12 PM ----------
Lol you replaying when i was writing my replay.its woooooork yeaaaa thanks my brother
Click to expand...
Click to collapse
GOOD WORK BUDDY I will delete +add the files that you have explained here
i will make a zip file
Again thanks
matrixex said:
GOOD WORK BUDDY I will delete +add the files that you have explained here
i will make a zip file
Again thanks
Click to expand...
Click to collapse
Great.and big thanks for your work to provide to us the final version of the stock rom in zip file.its a nice to work as a team here
brther.i make another test.you need to delet just the psensorcal file from bin folder then replace sensor_default and sensor_goldfish from mini rom kitkat and put them in hw folder.thats it
hooooossamq said:
Great.and big thanks for your work to provide to us the final version of the stock rom in zip file.its a nice to work as a team here
Click to expand...
Click to collapse
Buddy the problem was not in system folder the problem is in boot.img
Extract the zip on your computer and see the boot.img size it is approx
13.09 MB that is the modified by me
If you flash the zip and the
boot.img of stock rom which is 4.47 MB the everything will work fine
No need to delete anything
Ok
Hi bro it's me your brother matrixex just kidding
Bro why don't you port roms to Nokia x try porting cm13 or you can try fixing amhad had liquid smooth lolipop because you fixed my rom try bro try search the Web do anything let the battle begin outrage your limit pick up AK47 take cover and Win!
everything is working ?
---------- Post added at 12:56 PM ---------- Previous post was at 12:40 PM ----------
BTW link is not working
geo.tn said:
everything is working ?
---------- Post added at 12:56 PM ---------- Previous post was at 12:40 PM ----------
BTW link is not working
Click to expand...
Click to collapse
Link fixed
And everything is working remember flash rom
Then boot.zip
Done
can anyone put battery percent on nokia x stock rom...
it will be nice if someone can do it
veez21 said:
can anyone put battery percent on nokia x stock rom...
it will be nice if someone can do it
Click to expand...
Click to collapse
Use xposed modules
matrixex said:
Use xposed modules
Click to expand...
Click to collapse
what module bro?
veez21 said:
what module bro?
Click to expand...
Click to collapse
With the help. Of xposed module and Gravity Box you can theme your NOKIA X
You can also make signal strength look like in lollipop ROMS
First download xposed modules
From here
http://www.apkmirror.com/apk/rovo89...-installer-3-0-alpha4-2-android-apk-download/
(it is a apk file) install it and give it root permissions
After that you will have to install a framework after installing apk
And download gravity box apk from here
http://www.apkmirror.com/apk/c3c076...elease/gravitybox-3-5-8-android-apk-download/
And install it also you have to activate it from XPOSED module
(just search the web)
Enjoy tweaking
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Admeisterz & Virus007
Team Hex Presents This Easy To Use Batch File, To Make Fastboot Commands Automatic And Extremely Easy For The New & For The Lazy!!!
Big Thanks To The Community For Supporting!
Now Also Available In French Thanks To LeSScro
Features
Flash CWM Recovery 5.8.4.0
Boot CWM Recovery 5.8.4.0
Flash TWRP Recovery 2.5.0
Flash HTC Stock Recovery 1.29
Flash Boot.Img
Clear Cache
Relock Bootloader
Get CID
Get MID
Reboot - Normal
Reboot - Bootloader
Please Remember This Is Something You Should Use At Your Own Risk - However, These Are Basic Fastboot Commands So The Risks Are Very Low!
If You Come Across Any Problems Using This Batch File Please Post On This Thread And We Will Aim To Have It Fixed ASAP. If It Is a Individual Problem, Again Speak To Us, And We Will Do Our Best To Help You. If You Have Any Further Requests Please Let Us Know And We Will Look Into It And Aim To Include In Future Updates!
PLEASE REMEMBER TO MAKE SURE YOU APPRECIATE & SUPPORT ALL THE WORK DEVS HAVE PUT IN. IF IT WASNT FOR THE CWM TEAM, AND THE TWRP TEAM THIS BATCH WOULD NOT BE POSSIBLE! SO A MASSIVE THANK YOU TO ALL
Link To Download
http://bit.ly/13sSCB6 v2.4 - English Minor Bug Fixes 09/07/12
http://bit.ly/MUxGKJ v2.3 - French Minor Bug Fixes 09/07/12
Details
Instructions
Please Unzip Folder - Then Double Click runme.bat To Start The Batch File.
Changelog
Code:
[B][03/07/2013] V2.4[/B]
Updated TWRP to 2.5.0.0
[B][03/07] V2.3[/B]
Removed Recently Non-Developed Recoveries - Please Refer To Old Versions
If You Want Them (i.e Pauls & Doom Recoveries)
Added New CWM Recovery 5.8.40
Added New TWRP Recovery 2.1.7
[B][28/05] V.2.2[/B]
Added CWM Recovery With Working USB / ADB
Added TWRP Recovery 2.1.6
[B][22/05] V.2.1[/B]
Added French Translation - Thanks to leSScro
[B][16/05] V.2.1 [/B]
Added New HTC Stock Recovery 1.29
[B][04/05] V.2.0 [/B]
Complete UI Redesign
Added Check Connected Devices
[B][30/04] V.1.2 [/B]
Added Flash TWRP Recovery
[B][27/04] V.1.1 [/B]
Added Instruction To Flash DOOM Recovery
Added Flash Interim Recovery
Added Relock Bootloader
Fixed Get MID Command
General Code Cleanup.
[B][26/04] V1.0[/B]
Initial Release
New update ...please feel free to comment or make a request!!!!
Guys & girls please download this version of fastbootflasher rather than closed thread version. I can still see you're downloading the old version on the closed thread. I am soon deleting that so please use this one instead from now on! Has all same features as the other thread but this version is being worked on by not just me but my whole team so expect a lot more from it!
Thanks for all your support so far and we've got so many downloads! we never expected it to be this popular!! :-O
Remember any requests let us know!
Sent from my HTC One X using xda premium
looking good, im liking the new ui. cheers for this.
Just wanted to say that this has made my life easier, since I'm more a "searching the easiest way" and "the more specific a manual, the less stress I have following it" type of guy. Your tool makes flashing things a lot more relaxed for me. Thanks!
Robpollard said:
Just wanted to say that this has made my life easier, since I'm more a "searching the easiest way" and "the more specific a manual, the less stress I have following it" type of guy. Your tool makes flashing things a lot more relaxed for me. Thanks!
Click to expand...
Click to collapse
Good to hear mate! That's what its made for so good to know it does work!
Sent from my HTC One X using xda premium
New Update Out
[16/05] V.2.1
Added New HTC Stock Recovery 1.29
Check it out!
TeAm HeX said:
New Update Out
[16/05] V.2.1
Added New HTC Stock Recovery 1.29
Check it out!
Click to expand...
Click to collapse
just used this to flash stock recovery 1.29 and relock my bootloader, all worked perfectly.
great program
bogfather said:
just used this to flash stock recovery 1.29 and relock my bootloader, all worked perfectly.
great program
Click to expand...
Click to collapse
Cheers Nice to know we are helping the community!
Thank you.
I'll try it out right now. I only want to do this so I can get the new 1.29.401.11 OTA.
Can I unlock the bootloader with this tool too, afterwards?
---------- Post added at 06:06 PM ---------- Previous post was at 05:27 PM ----------
exCluSive1 said:
Thank you.
I'll try it out right now. I only want to do this so I can get the new 1.29.401.11 OTA.
Can I unlock the bootloader with this tool too, afterwards?
Click to expand...
Click to collapse
****e, it's not working for me. I installed HTC drivers, but it says 'waiting for device...', even when I choose other options in the UI :-(
---------- Post added at 06:17 PM ---------- Previous post was at 06:06 PM ----------
I manually went to bootloader screen (with vol down and reboot) and then it the tool suddenly said installed recovery. After this, I chose the RE-LOCK BOOTLOADER option, but this did not work (bootloader still said 'UNLOCKED' instead of re-locked). What went wrong and why can't I re-lock the bootloader?
---------- Post added at 06:36 PM ---------- Previous post was at 06:17 PM ----------
Great, my whole recovery seems to be gone now
omg man, where's boot.img?
exCluSive1 said:
Thank you.
I'll try it out right now. I only want to do this so I can get the new 1.29.401.11 OTA.
Can I unlock the bootloader with this tool too, afterwards?
---------- Post added at 06:06 PM ---------- Previous post was at 05:27 PM ----------
****e, it's not working for me. I installed HTC drivers, but it says 'waiting for device...', even when I choose other options in the UI :-(
---------- Post added at 06:17 PM ---------- Previous post was at 06:06 PM ----------
I manually went to bootloader screen (with vol down and reboot) and then it the tool suddenly said installed recovery. After this, I chose the RE-LOCK BOOTLOADER option, but this did not work (bootloader still said 'UNLOCKED' instead of re-locked). What went wrong and why can't I re-lock the bootloader?
---------- Post added at 06:36 PM ---------- Previous post was at 06:17 PM ----------
Great, my whole recovery seems to be gone now
Click to expand...
Click to collapse
Are you 100% sure you are in fastboot USB mode and not just hboot?
Sent from my HTC One X using xda premium
brenopoubel said:
omg man, where's boot.img?
Click to expand...
Click to collapse
You have to put the boot.img from the Rom you want to flash in the boot folder if that's what you mean
Sent from my HTC One X using Tapatalk 2
brenopoubel said:
omg man, where's boot.img?
Click to expand...
Click to collapse
You chose the boot.img you want to put in there mate and then put it in the bootimg folder and run the command?
Sent from my HTC One X using xda premium
brenopoubel said:
omg man, where's boot.img?
Click to expand...
Click to collapse
Please make sure you read the instructions carefully before you use this program!
Your tools looks great.. can i translate in french this awesome tool ?
exCluSive1 said:
Great, my whole recovery seems to be gone now
Click to expand...
Click to collapse
Hi,
From what youve said above it sounds sort of like youve managed to install the 1.29 recovery?
So when you go into recovery all you should see is just a little icon in the middle of a mobile phone and thats it?
I need you to get back to me to help you any further if you still need it?
Thanks
French Translation
Hi Guys & Girls.
Have just updated post to include a new French translation thanks to leSScro... soo all credit goes to him for that!
If youre french or prefer the french language give it a go and download it!
Cheers
Good news, i hope some others users will update files in favorite language... then tool will trip in the world...
I am opening this thread for the development of Fly F53s (Android 4.1.2):
Fly F53S Features
5.3" IPS Touchscreen
8MP primary Camera with LED Flash
Dual SIM Support (Normal Sims) (3G+2G)
1Ghz Dual Core Processor
Android 4.1.2 JellyBean OS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Development
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note :Beyond this point at your own Risk
root
you can use root master ( just google "VRoot_1.7.0.3882_Setup.exe").
it is a Chinese rooting desktop program.
you will find some threads in this forum also (like http://forum.xda-developers.com/showthread.php?t=2403230) regarding root master, but they might not give you all the required files.
after rooting, install CWM author's superuser app from play store & disable the Chinese superuser app.
you can also uninstall the other Chinese app which is installed by the root master.
[Recovery] CWM RECOVERY (credit: <myself!>)
Download
Stock Boot.img (credit: <myself!>)
Download
Stock Recovery.img (credit: <myself!>)
Download
CWM Is English or Chinese
codergenius said:
I am opening this thread for the development of Fly F53s (Android 4.1.2):
Fly F53S Features
5.3" IPS Touchscreen
8MP primary Camera with LED Flash
Dual SIM Support (Normal Sims) (3G+2G)
1Ghz Dual Core Processor
Android 4.1.2 JellyBean OS
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Development
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note :Beyond this point at your own Risk
root
you can use root master ( just google "VRoot_1.7.0.3882_Setup.exe").
it is a Chinese rooting desktop program.
you will find some threads in this forum also (like http://forum.xda-developers.com/showthread.php?t=2403230) regarding root master, but they might not give you all the required files.
after rooting, install CWM author's superuser app from play store & disable the Chinese superuser app.
you can also uninstall the other Chinese app which is installed by the root master.
[Recovery] CWM RECOVERY (credit: <myself!>)
Download
Stock Boot.img (credit: <myself!>)
Download
Stock Recovery.img (credit: <myself!>)
Download
Click to expand...
Click to collapse
CWM English or Chinese ? Any Screen Shots Pls
dep2477 said:
CWM English or Chinese ? Any Screen Shots Pls
Click to expand...
Click to collapse
as I dont know chinese, i created this CWM in english
Fly F53S Firmware Files
Fly F53S Firmware Files :
Here is the Link : Download
---------- Post added at 12:03 PM ---------- Previous post was at 11:59 AM ----------
Have any one found any Back Cover or Flip Cover for this phone ?
---------- Post added at 12:04 PM ---------- Previous post was at 12:03 PM ----------
codergenius said:
as I dont know chinese, i created this CWM in english
Click to expand...
Click to collapse
Just Kidding .
dep2477 said:
Fly F53S Firmware Files :
Here is the Link : Download
---------- Post added at 12:03 PM ---------- Previous post was at 11:59 AM ----------
Have any one found any Back Cover or Flip Cover for this phone ?
---------- Post added at 12:04 PM ---------- Previous post was at 12:03 PM ----------
Just Kidding .
Click to expand...
Click to collapse
1) gsm hosting firmware is untested, so i extracted it again from my rooted fly f53s for making cwm
2) i got a cover free of very poor quality (in the box) besides there is no flip cover available for this mobile in the market
Fly F53S Clone
Check out specification of STAR S7180:
Custom Roms are available on Need ROM Website (A lot of them)
LInk
Many Many thanks for creating this forum
dep2477 said:
CWM English or Chinese ? Any Screen Shots Pls
Click to expand...
Click to collapse
Once again thanks for creating this thread
hope a good mod and custom Roms for this phone
samsung galaxy s4 boot animation and logo
Hi dear friends i made this boot logo and animation with sounds of galaxy s4
1 you need to have cwm recovery
2 backup all your system files
3 put the zip on your sd card
4 install the zip from sd card in recovery menu
5. I AM USING THIS AND EVERY ONE BELIEVES ITS GALAXY S4
6 THE MOST IMPORTANT IN NOT RESPONSIBLE IF ANY DAMAGE HAPPENS ....
Got my fly f53s today. Whats with the auto focus and torch as led is not that bright and autofocus is not much interactive. Needs a custom rom for improved performance. Still investigating the phone. Charging seems taking too long.
Sent from my F53s using XDA Premium 4 mobile app
yes in deed
dep2477 said:
Got my fly f53s today. Whats with the auto focus and torch as led is not that bright and autofocus is not much interactive. Needs a custom rom for improved performance. Still investigating the phone. Charging seems taking too long.
Sent from my F53s using XDA Premium 4 mobile app
Click to expand...
Click to collapse
YES in deed the led is to low . consider its not there but auto focus is good and battery obviously takes too long to charge .
TIP CHARGE IT AFTER SWITCHING OFF YOUR F53s it will show actual status of battery .
Mine autofocus
Fly F53s - New Rooting Method
Thanks for the CWM.
Now, I am uploading two files:
Method.
1. Enter into recovery whether CWM or Stock.
2. Flash superuser-3.1.3-arm-signed.zip
3. Dont reboot, Flash su-bin-3.1.1-arm-signed.zip
4.Reboot
5. Device Rooted
Enjoy.
I rooted my Fly F53s via this method. Easy as that.
New Firmware Version
Fly F53S Firmware Files :
Here is the Link : Download
There is V3 Firmware of Fly F53s on the above linked I shared.
V2 is also available.
Mine had Version 2. But I flashed V3 in which battery indication issue was solved.
Try It.
Battery
Does anyone found a compatible battery for this phone having higher mAh.
---------- Post added at 02:39 PM ---------- Previous post was at 02:37 PM ----------
Are The Users Off the Grid ! Why?
Clone May be
May be considered a clone : Vice - versa except front camera.
Custom roms available at needrom.com and can de ported to our device
http://www.jiayumobileshop.com/jiay...roid-4-1-1g-ram-8-0mp-camera-smart-phone.html
Will try
dep2477 said:
May be considered a clone : Vice - versa except front camera.
Custom roms available at needrom.com and can de ported to our device
http://www.jiayumobileshop.com/jiay...roid-4-1-1g-ram-8-0mp-camera-smart-phone.html
Click to expand...
Click to collapse
Will try to port..
Got the base Rom of F53S
But where to get the META-INF FOLDER
I am trying to port a Lewa Rom.
Sent from my F53s using XDA Premium 4 mobile app
Tried to port lewa rom of G2S from needrom. Even flashed it direct by removing the assert lines. Flashed ok. But startup logo takes time and then lewa animation comes on with flickering giing on and stays on. With some adjustments I think it is totally portable. I am not a fine developer one with some more knowledge can definetly can. Waiting for that.
Sent from my F53s using XDA Premium 4 mobile app
Great work. . keep it up
Hello everyone im so happy that somebody created a forum for this and are actually working for a rom.. This phone is really good and it just needs a good rom to go with it. Great work people and thanks once again for the wonderful work that you people are doing.
Waiting for any update.
One question though will this phone ever get kitkat.. or will it be compatible with it.
Thanks:good::good:
When in off mode charging battery showing 58% when switch on it is showing 16% .
Sent from my F53s using XDA Premium 4 mobile app
[Tutorial] Xposed Installer for HTC DESIRE EYE Marshmallow & Lollipop with pictures
Xposed for HTC DESIRE EYE LOLLIPOP / MARSHMALLOW
Requirements:
HTC Desire Eye Device (Unlocked & Custom Recovery Like TWRP)
xposed-v87-sdk21-arm.zip For Lollipop: Download Here or
xposed-v87-sdk23-arm.zip For Marshmallow: Download Here
Xposed Installer apk-Link
***I am not responsible for bricked devices.***
Step 1: Download the xposed-v87-sdk21-arm.zip or xposed-v87-sdk23-arm.zip(For Marshmallow) & Xposed Installer apk from the above links.
Step 2: Copy the Downloaded files into Device.
Step 3: Reboot into recovery Mode
Step 4: Flash the xposed-v87-sdk21-arm.zip or xposed-v87-sdk23-arm.zip .
Step 5: Rebbot the device, Install the Xposed Installer apk.
Step 5: Open theXposed Installer & Click Framework.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 5: Click Softreboot
DONE.......!!! :laugh:
Sources:[OFFICIAL] Xposed for Lollipop/Marshmallow [Android 5.0/5.1/6.0, v78, 2015/11/15]
By Arun Gunupudi(Bunny)
My Devices
Current [ ======================== Previous
Arun.Gunupudi said:
Xposed for HTC DESIRE EYE 5.0.2
Requirements:
HTC Desire Eye Device (Unlocked & Custom Recovery Like TWRP)
xposed-v75-sdk21-arm.zip-Link
Xposed Installer apk-Link
***I am not responsible for bricked devices.***
Step 1: Download the xposed-v75-sdk21-arm.zip & Xposed Installer apk from the above links.
Step 2: Copy the Downloaded files into Device.
Step 3: Reboot into recovery Mode
Step 4: Flash the xposed-v75-sdk21-arm.zip .
Step 5: Rebbot the device, Install the Xposed Installer apk.
Step 5: Open theXposed Installer & Click Framework.
Step 5: Click Softreboot
DONE.......!!! :laugh:
Sources:[OFFICIAL] Xposed for Lollipop [Android 5.0/5.1, v75, 2015/10/07]
By Arun Gunupudi(Bunny)
My Devices
Current [ ======================== Previous
Click to expand...
Click to collapse
Wow, just noticed this. Thanks a lot for the info and support! Lifesaver
luisitox22 said:
Wow, just noticed this. Thanks a lot for the info and support! Lifesaver
Click to expand...
Click to collapse
Are you kidding...?
Or serious...
Updated for marshmallow
Arun.Gunupudi said:
Updated for marshmallow
Click to expand...
Click to collapse
No bull, had noticed this post, i was setting up xposed on my own for lolipop/mm via googling lol. thanks for updating the guide for mashmallow for us users.
We are become a strong little community
---------- Post added at 01:58 PM ---------- Previous post was at 01:42 PM ----------
Btw, now that you mention it, Xposed apps like AppopsXposed, Amplify,Powernap, greenify (Xboost via xposed) on mashmallow with it's "DOZE" feature are, are they still usefull? Also, how many are actually working on fully on MM so quickly?
luisitox22 said:
No bull, had noticed this post, i was setting up xposed on my own for lolipop/mm via googling lol. thanks for updating the guide for mashmallow for us users.
We are become a strong little community
---------- Post added at 01:58 PM ---------- Previous post was at 01:42 PM ----------
Btw, now that you mention it, Xposed apps like AppopsXposed, Amplify,Powernap, greenify (Xboost via xposed) on mashmallow with it's "DOZE" feature are, are they still usefull? Also, how many are actually working on fully on MM so quickly?
Click to expand...
Click to collapse
@luisitox22
Not yet tested.. Because currently I'm on lollipop due to heavy battery drain...
I tested Gravity box [MM], Lucky patcher modules.. They worked fine...
Sorry to say I don't have idea about DOZE
Hope this thread will be useful to all of us...
Arun.Gunupudi said:
@luisitox22
Not yet tested.. Because currently I'm on lollipop due to heavy battery drain...
I tested Gravity box [MM], Lucky patcher modules.. They worked fine...
Sorry to say I don't have idea about DOZE
Hope this thread will be useful to all of us...
Click to expand...
Click to collapse
Same here, reverted back do to heavy battery drain yet tried all sort of kernel governors and setting to see if it helped to no avail. This theread will help many. In th elast month, 3 friends hve bought HTC EYE just based on my rom feedbacks .
Love my HTC EYE
luisitox22 said:
Same here, reverted back to heavy battery drain yet tried all sort of kernel governors and setting to see if it helped to no avail. This theread will help many. In th elast month, 3 friends hve bought HTC EYE just based on my rom feedbacks .
Love my HTC EYE
Click to expand...
Click to collapse
Wow that's cool....
Awaiting for sense 7 [MM]
@xXminiWHOOPERxX told that he'll release it today.....
Seeing post from morning (coz I'm from INDIA )
Arun.Gunupudi said:
Wow that's cool....
Awaiting for sense 7 [MM]
@xXminiWHOOPERxX told that he'll release it today.....
Seeing post from morning (coz I'm from INDIA )
Click to expand...
Click to collapse
She. XxminiwhooperxX is the HTC wonder chick
luisitox22 said:
She. XxminiwhooperxX is the HTC wonder chick
Click to expand...
Click to collapse
Wow.....
I misunderstood.. Sorry....
Links are updated for Marshmallow xposed framework.
Check out...!!
Arun.Gunupudi said:
Links are updated for Marshmallow xposed framework.
Check out...!!
Click to expand...
Click to collapse
I am on sky dragon 1.6.5. 7mm
I flashed the exposer framework latest version two times but failed.
twrp is 2.8.7.0 no error no quoted only failed?
---------- Post added at 01:31 PM ---------- Previous post was at 01:00 PM ----------
hbrajhbh1 said:
I am on sky dragon 1.6.5. 7mm
I flashed the exposer framework latest version two times but failed.
twrp is 2.8.7.0 no error no quoted only failed?
Click to expand...
Click to collapse
I downloaded again the above files and flashed again it shows successful? But after reboot no frame work installer installed? after rebooting how to install it?
hbrajhbh1 said:
I am on sky dragon 1.6.5. 7mm
I flashed the exposer framework latest version two times but failed.
twrp is 2.8.7.0 no error no quoted only failed?
---------- Post added at 01:31 PM ---------- Previous post was at 01:00 PM ----------
I downloaded again the above files and flashed again it shows successful? But after reboot no frame work installer installed? after rebooting how to install it?
Click to expand...
Click to collapse
After flashing the zip downloaded.
Install the xposed framework apk.
Then open it click framework & then soft reboot.
Sent from my HTC Desire EYE using Tapatalk
Arun.Gunupudi said:
After flashing the zip downloaded.
Install the xposed framework apk.
Then open it click framework & then soft reboot.
Sent from my HTC Desire EYE using Tapatalk
Click to expand...
Click to collapse
finally I installed the frame work successfully thanks
hbrajhbh1 said:
finally I installed the frame work successfully thanks
Click to expand...
Click to collapse
Sent from my HTC Desire EYE using Tapatalk
Xposed v80
OP Updated....
Xposed v80 ready
how to uninstall ?
fetto0o said:
how to uninstall ?
Click to expand...
Click to collapse
Flash this ZIP
Update
OP Updated
Xposed v86 is ready.
need zip to uninstall
Arun.Gunupudi said:
Flash this ZIP
Click to expand...
Click to collapse
need zip to uninstall
I want to share 2 edited APKs with you all as I am using them by myself for couple of days
I just downloaded the Home APK from APK mirror and decompiled it, edit some values, edited some images and recompiled it, signed it, and zip-aligned it.
Same goes for the SystemUI except I used the one from XZROM v 3.0 , so preedited credits goes to the respective ROM developers.
Home APK Features :
- No gradient anywhere , looks very clean and bright.
- Auto hide page navigation indicators
- "APPS" button changed to something beautiful (by my standard)
- App drawer is fully transparent.
- Based on latest Home version 10.2.A.1.0 and then changed to 10.2.A.1.0_CHINMOY32
- "Auto Rotate" and "Double Tap to Sleep" pre-selected in settings.
- Some animation optimization done, speed and fluency wised, you will be able to feel them while using.
- Thats all , I think
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SystemUI Features:
- No gradient anywhere , looks very clean and bright.
- "Notification Drawer" and "Quick Settings Panel" is now fully transparent with nice blue color tint.
- Animation speed increased.
- Nav bar buttons are removed , you can just touch them there and they will work as before.
- VoLTE and some other disabled quick settings added.
- Thats all , I think
Screenshots:
Tested Devices:
- Only tested them on my Z5 E6683 DSDS, works fine with no FCs or error. You can always try them and let me know, I will edit the OP accordingly.
Credits:
- All Credits go to JAVA, SOMC, SEMC, XZROM Devs and other respective developers who created APKTOOL and so on....... None of these would be possible without their hard work
- If you wanna use these APKs anywhere, no problem , just give credits to the above mentioned parties along with my XDA alias "chinmoy32"
Download Links:
Home APK
SystemUI
Instructions:
- First of all make a nandroid backup of your full system. (i.e. I am not responsible for any sorrow someone might feel)
- Copy the APKs to their respective folders inside the SYSTEM partition (must have root for that) using any decent file explorer (i.e. X-Plore)
- SET permission 644
- Clean Cache and Delvik Cache.
- Restart and you are all done.
Have fun !!
______________________________________________________________________________________________________________________
Nice job,
I will backup and try systemui
Thank you
---------- Post added at 01:28 PM ---------- Previous post was at 12:56 PM ----------
It is for odex stock or deodex
Screenshots?
Not working in my stock z5p i got wallpaper picture with back key . And when lock screen it is black all time. Pls any screenshot or any other working with z5 stock rooted
karrouma said:
Nice job,
I will backup and try systemui
Thank you
---------- Post added at 01:28 PM ---------- Previous post was at 12:56 PM ----------
It is for odex stock or deodex
Click to expand...
Click to collapse
Its for DEODEXED ROMs
karrouma said:
Not working in my stock z5p i got wallpaper picture with back key . And when lock screen it is black all time. Pls any screenshot or any other working with z5 stock rooted
Click to expand...
Click to collapse
have you tried cleaning the delvik cache and cache ???
Dr. Death said:
Screenshots?
Click to expand...
Click to collapse
Uploaded in OP
chinmoy32 said:
have you tried cleaning the delvik cache and cache ???
Click to expand...
Click to collapse
Bro your file is not flashable .zip it is an .apk . I replace systemui from system/privateapp/systemui and give the right permission and restart
---------- Post added at 06:27 PM ---------- Previous post was at 06:25 PM ----------
chinmoy32 said:
Uploaded in OP
Click to expand...
Click to collapse
Thank you for the screenshot,
Can you give us for odex
Tjank you
karrouma said:
Bro your file is not flashable .zip it is an .apk . I replace systemui from system/privateapp/systemui and give the right permission and restart
---------- Post added at 06:27 PM ---------- Previous post was at 06:25 PM ----------
Thank you for the screenshot,
Can you give us for odex
Tjank you
Click to expand...
Click to collapse
I know they are not flashable. But either way you need to clean the cache and delvik cache. It may seem like it is working without cleaning but after a while it will start to boot-loop. So clean 'em just to be on safe side of things
I cant give you odexed , but you can always copy them to their respective places and delete the "OAT" folder and make them work in your odexed ROM.
chinmoy32 said:
I know they are not flashable. But either way you need to clean the cache and delvik cache. It may seem like it is working without cleaning but after a while it will start to boot-loop. So clean 'em just to be on safe side of things
I cant give you odexed , but you can always copy them to their respective places and delete the "OAT" folder and make them work in your odexed ROM.
Click to expand...
Click to collapse
Can you upload the modified systemui.apk to work with odex?
Thank you
karrouma said:
Can you upload the modified systemui.apk to work with odex?
Thank you
Click to expand...
Click to collapse
please look at the previous post
Ok, i will try ltr and delet oat
karrouma said:
Ok, i will try ltr and delet oat
Click to expand...
Click to collapse
Any luck!?
Sent from my E6653 using Tapatalk
Working
Wess.a said:
Any luck!?
Sent from my E6653 using Tapatalk
Click to expand...
Click to collapse
Confirmed
Yes it work.
Till now without any lag or error
Stock rom z5p dual
It seems more faster than before
Nice job thank you.
Small problem , wifi sign is always on screen when on. If turned off it disappear
11TH AUGUST MIUI 10 Xaiomi.eu 9.8.8 By @srahul1
Change log -
- system improvement
- updated display driver
- Tweaks for more clear screen
- improve reading mode and display colour
- improve headphones sound
- fixed Mi enhancer ✓
- reduce lag for pubg and other games
- thermal support
- increase zram swap for 3gb
- july security patch
- Added extreme battery saver
- Added screen flicker mode
- improve edge gestures
- vilte working
LINKS HERE-
Mod edit - Link removed!
***************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************
4TH AUGUST MIUI 10 Xaiomi.eu 9.8.1 By @srahul1
Change log -
Fixed FM ( no need to headphones)
Fixed DT2W For any kernel.
Add network carrier and weather in qs bar.
Enabled dual data active mode for quick switch data between booth sim.
Added notification number show in status (like Aosp Roms).
Added Stock navigation bar from Redmi note 5.
Added more wallpapers.
Added live wallpaper
Fixed Mi sound enhancer
Added Dirac
Fixed vilte thanks to (@singhaarav and @Poisonfang)
Fixed bootlop
Removed select simcard notification after every reboot
Added expended power menu.
LINK HERE Mod edit - Link removed!
Bugs :
None
HERE-Mod edit - Link removed!
*********************************************
22 JULY- XIAOMI EU ROM
Change Log-
Reading Mode Fixed
Screen Rec System Sound Fix
Improve Vendor
Support Same Time On Wifi & Hotspot
Added Game Turbo
Added MiUi Wellbeing
Added Raise To WakE
Bugs :
None
LINK HERE - Mod edit - Link removed!
21 JULY -Mi Global Rom_9.7.1
LINK-Mod edit - Link removed!
14 JULY -NEW BUILD OUT-
Guide and firmware here!
Mod edit - Link removed!*
**************************************************
**************************************************
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4th July Build
EARLIER BUILD
Xaiomi.eu Stable 10.3.2.0 For ASUS_MAX PRO M1
SCREENSHOTS
IOS THEME AND THEME STORE
WORKING SAFETYNET AND GOOGLE PAY
DOWNLOAD LINKS HERE
Mod edit - Link removed!
--FLASHING GUIDE--
(Mandatory)DOWNLOAD ALL FROM GIVEN LINK TO EXTERNAL SD CARD OR PC
(Mandatory)BACKUP ALL DATA BEFORE PROCEEDING
1-Install Latest Twrp Recovery
2-Flash Latest Pie firmware
3-Wipe /system /data /cache /vendor /dalvik-cache
4-Flash Xiaomi.Eu_Stable_10.3.2_X00TD By Rinku.zip from TWRP recovery
5-Reboot device
6-Setup device and log in to Mi Account and change the theme to Rhodium
7-After changing theme reboot to Twrp Recovery and mount /system
8-Flash Theme fix.zip + (Optional) 3GB varient fix.zip
9-Flash Singh kernel.zip
10-Flash SinghkernelSpectrum.zip
11-Flash Magisk.zip
12-Flash AsusPieCam6.zip
13-Reboot Device
MINOR BUG FIXES
1-Reading mode
(FIX- Install Night light from link provided.Enable Night light and add from notification panel)
2-SNAP CAMERA DUAL CAMERA (BOKEH MODE)
SNAP CAM FIX-
i) Install Mixplorer app from link and grant root permission
ii) Open /root/system/build.prop as code editor
iii) Find Manufacturer and Change "manufacturer=Asus" to "manufacturer=asus"
iv)save and exit
v)Open /root/vendor/build.prop as code editor and repeat iii) and iv) steps
vi)Copy all folders from asuspiecam6.zip [/priv-app /lib64 /etc /app] TO "/root/system/*here*"
vii)reboot
viii)Disable Video Stabilization from snapcam settings. For video fix.
Credits:
@XiaoMi.eu For Xiaomi edited rom
@rinkuBidhan For porting to Max PRO M1
@Asus For Snapcamera
@mpschahal16 for Singh Kernel
@adityaon For Reading mode & snapcam bokeh mode fixing
Nice work Bro ! everything works fine! do you recommend some kernel for battery backup?
How about screen recording dude ? Does Audio Internal is working ? Plz answer. Thanks before
---------- Post added at 06:20 PM ---------- Previous post was at 06:05 PM ----------
Link for magisk error
Wi-Fi display working Fine here! Thankssssss
---------- Post added at 08:21 PM ---------- Previous post was at 08:19 PM ----------
ryanmmalik said:
How about screen recording dude ? Does Audio Internal is working ? Plz answer. Thanks before
---------- Post added at 06:20 PM ---------- Previous post was at 06:05 PM ----------
Link for magisk error
Click to expand...
Click to collapse
Only mic or mute audio in screenrecord
nywanb said:
Nice work Bro ! everything works fine! do you recommend some kernel for battery backup?
Click to expand...
Click to collapse
I think you should try Overdose kernel
and naptime app for battery optimisation
bootlop?
pls help. im not even booting. waiting for 15min and just looping in bootanimaton . pls help. im using magisk 19. bcs magisk link u give is broken. maybe thats the problem? and when flashing the camera app it got error 1 message pls help. and pls give a proper flashing step thats too complicated for noob like me
SayaGanteng said:
pls help. im not even booting. waiting for 15min and just looping in bootanimaton . pls help. im using magisk 19. bcs magisk link u give is broken. maybe thats the problem? and when flashing the camera app it got error 1 message pls help. and pls give a proper flashing step thats too complicated for noob like me
Click to expand...
Click to collapse
w8 im creating a noob guide
adityaon said:
w8 im creating a noob guide
Click to expand...
Click to collapse
lol pls help im not booting here. first wipe all aka clean flash right? then restore all vendor data etc from miui right? then install magisk? but im using vers 19. then flash the pie beta fw. then flash cam app? but it showinh error 1 . and then rebbot? but im waiting till tomorow its still in boot animasi :v pls help me
hey. im using batik twrp. and cannot see the twrp file. so, maybe i must use basic twrp?
If i install without magisk will it boot?
What about the pung graphics issue?
---------- Post added at 01:33 PM ---------- Previous post was at 01:32 PM ----------
nywanb said:
Nice work Bro ! everything works fine! do you recommend some kernel for battery backup?
Click to expand...
Click to collapse
Try pbh
cant connect to camera!
always showing 'can't connect to camera' anybody please suggest any fix
Harry8619 said:
always showing 'can't connect to camera' anybody please suggest any fix
Click to expand...
Click to collapse
try the camera fix or first move to fastboot version of stock rom and then restore via twrp
adityaon said:
try the camera fix or first move to fastboot version of stock rom and then restore via twrp
Click to expand...
Click to collapse
which camera fix?
Harry8619 said:
which camera fix?
Click to expand...
Click to collapse
chk my post here for bug fixes camera section
adityaon said:
chk my post here for bug fixes camera section
Click to expand...
Click to collapse
for god sake read the full post
Doesn`t work fm radio. Any fix?
adityaon said:
for god sake read the full post
Click to expand...
Click to collapse
Can you please elaborate what do you mean by " just add those extra lines below the earlier text "
i just paste all the text from mui fix build.prop and paste after the last line of default build .prop . but system stuck on boot animation.
Thanks
KinslayerDeth said:
Can you please elaborate what do you mean by " just add those extra lines below the earlier text "
i just paste all the text from mui fix build.prop and paste after the last line of default build .prop . but system stuck on boot animation.
Thanks
Click to expand...
Click to collapse
paste those lines in/vendor/build.prop
not in /system/vendor/
Googke pay is not working after disableing the google play service phone permission
adityaon said:
paste those lines in/vendor/build.prop
not in /system/vendor/
Click to expand...
Click to collapse
have done as you say but camera not working