Develop Bugs

[MOD] Ad Blocking on Start-Up [Updated 11/09/2010]

update: This method is for use with Temp-Root with Visionary app. For permanent root, you can just use the adfree app, which is free in the market. Alternatively, you can still use the manual temp-root method with permanent root if you don't want an extra app. Just run the adblock-startup.sh file once, and then use the wget script whenever you want to do an update of the hosts file!
After trying out a few things to get ad free working on startup, I was able to get it going without actually using the app. I used the basic concept of the app, but basically am performing it in command lines.
For this, I used GScripts to run/edit scripts, and Visionary to do a temp-root.
If you want to skip all of this, and go to a completely automated script, see updates at bottom.
First, create a script, adblock-wget.sh, to download the latest hosts file which blocks certain sites. It pulls the file from a website that contains updated hosts files and stores it in /data/data/:
##adblock-wget.sh##
Code:
wget http://209.68.48.119/winhelp2002/hosts.txt -O /data/data/hosts
This can be done in GScripts, and run every couple days to get the latest copy. Make sure you have SU checked in the script.
Second, we need to make another script, adblock-startup.sh which removes the existing hosts file in /system/etc/ and then create a symlink to the hosts file we just obtained on the internet in /data/data/
##adblock-startup.sh##
Code:
mount -o remount,rw /dev/block/mmcblk0p25 /system
rm /etc/hosts
ln -s /data/data/hosts /system/etc/hosts
mount -o remount,ro /dev/block/mmcblk0p25 /system
finally, you'll need to add this script to visionary.sh. if you created it in gscripts, one easy method is to long press the script in the menu, and save to SD. it'll be placed in your /sdcard/gscript/ folder.
to place this newly created script in visionary.sh, open up your current visionary.sh file, and place this line in it:
##visionary.sh##
Code:
sh /sdcard/gscript/adblock-startup.sh #change to correct directory
busybox killall system_server #this hot reboot is optional
the last line in that script performs a quick reboot, which retains temp-root and hopefully clears the DNS caches if you are still seeing ads pop up.
- - - - -
[UPDATE 11/03/2010]
I added the scripts in a zip file attached.
[update 11/04/2010]
if you dont want to manually update, you can just add the wget function into the installation script shown below. This will download the latest ad block updates at start-up, so you will not need to manually update later.
## adblock.sh ##
Code:
wget http://209.68.48.119/winhelp2002/hosts.txt -O /data/data/hosts
mount -o remount,rw /dev/block/mmcblk0p25 /system
rm /etc/hosts
ln -s /data/data/hosts /system/etc/hosts
mount -o remount,ro /dev/block/mmcblk0p25 /system
for this method, just place the same info in visionary.sh:
##visionary.sh##
Code:
sh /sdcard/gscript/adblock.sh
busybox killall system_server
replace the location to where you end up putting adblock.sh.
working example files are attached.
- - - - -
please note that you can change some of these steps to fit what other items you have running at startup.
if you're able to find a better method to perform this, please let me know! I was unable to run these commands directly within visionary.sh, so i had to make these links.
Thanks!
credits go to "Microsoft MVPs" for maintaining the HOSTS ad blocking file, delta_foxtrot2 who discovered and made the AdFree app

Nice write up, I finally got it working using root explorer and doing the steps manually, but was too lazy to script it haha, good work though

Upload the script file for us
Sent from my T-Mobile G2 using XDA App

Dalamak said:
Upload the script file for us
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
done. check the first post.
you can also be sporty and use the wget function at startup too.

For those of you who have a problem with visonary.sh locking your phone up.
Here is a gscript version.
Code:
# Overclock the CPU
insmod /data/local/vision_oc.ko pll2_l_val=73
insmod /data/local/tun.ko
# No Ads thanks XDA
rm /data/data/hosts
wget http://209.68.48.119/winhelp2002/hosts.txt -O /data/data/hosts
mount -o remount,rw /dev/block/mmcblk0p25 /system
rm /etc/hosts
ln -s /data/data/hosts /system/etc/hosts
mount -o remount,ro /dev/block/mmcblk0p25 /system

Does this actually work? I've tried hot-rebooting the phone (retaining root), and I still get ads. How does this differ from using visionary, running ad free, and hot booting?
The problem I'm seeing is that it doesn't seem like a hot reboot clears the DNS cache.

dyndragon said:
Does this actually work? I've tried hot-rebooting the phone (retaining root), and I still get ads. How does this differ from using visionary, running ad free, and hot booting?
The problem I'm seeing is that it doesn't seem like a hot reboot clears the DNS cache.
Click to expand...
Click to collapse
it sometimes block ads, sometimes does not. one, you might have to clear the caches in the apps you use as well. and two, some ads (presumably newer) arent blocked in the hosts file either.
this is not different than using adfree at all. it uses the same hosts file and same symlink technique for htc phones. i just tried to make it work automated on startup.

works here.

update
updated original post with a newer "self-healing" start up script, which will automate the entire process after running visionary root.

How come in the script you delete /etc/hosts but symlink to /system/etc/hosts ? Excuse my ignorance

you cant symlink a file that already exists, so i had to delete it. You can also just copy /data/data/hosts to /system/etc (or /etc) but it doesnt always work for some reason even though its mounted rw... this method seems to be flawless, plus you can update /data without issues and always have the latest copy there.

So does this block ads in apps? If so, it doesn't seem to block the ads that take up an entire screen (where you have to click 'skip' to move on), but seems to block the smaller ads from my brief trial period with it so far.

sorry but where exactly is visionary.sh? do i have to create it myself or does it exist somewhere after a temp-root?

ajk1311 said:
sorry but where exactly is visionary.sh? do i have to create it myself or does it exist somewhere after a temp-root?
Click to expand...
Click to collapse
You create the visionary.sh script in /data/local/
It runs automatically when you use the visionary app (located in market). Those this app is now outdated since permaroot is out.

yes. this is unneccessary if you used the new root method. the adfree app is free and does the same thing.
Sent from my T-Mobile G2 using XDA App

minotauri said:
yes. this is unneccessary if you used the new root method. the adfree app is free and does the same thing.
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
Or you could say that app is useless since this does the same thing
Lol, either way I like this better and I thank you for providing it!

lol. ya. but the app came first. this is just an appfree version of adfree. it still works with perm root. you just need to do the symlink once and then run the wget command when you want to update a new hosts file which is updated weekly or so.
Sent from my T-Mobile G2 using XDA App

I have been unable to get adfree to work. Still get ads in all my apps. Anyone else having this issue?

yo
since now we have perm root can you make a permanent script rather than doing visionary and scripts?

adfree from market
Adfree from the market works great with perm root. D-load from market. Open the app. Click install at the top and reboot phone. Ad's should now be blocked from apps. Angry birds with no ads!! Sweetness!!!

[GUIDE] Update CM without losing custom /system changes (ex Swype, keymap)

There's a really simple way to prevent CyanogenMod from overwriting your custom /system changes during an update. Create the file '/system/etc/custom_backup_list.txt' with a list of files within /system that you don't want to be overwritten.
For example, to prevent CM from wiping out Swype, open adb shell and type this:
Code:
mount -o remount,rw /system
cd /system/etc
echo lib/libSwypeCore.so >custom_backup_list.txt
echo app/Swype.apk >>custom_backup_list.txt
cd /
mount -o remount,ro /system
If you use teferi's custom keymap, do this:
Code:
mount -o remount,rw /system
cd /system/etc
echo lib/libSwypeCore.so >custom_backup_list.txt
echo app/Swype.apk >>custom_backup_list.txt
echo usr/keylayout/vision-keypad.kl >>custom_backup_list.txt
echo usr/keychars/vision-keypad.kcm.bin >>custom_backup_list.txt
cd /
mount -o remount,ro /system
Then the next time you flash CM, your changes to /system will still be there. If you want to see why this works, take a look at /system/bin/backuptool.sh
Hope this helps

Thanks! This is great; now I can easily keep my Email.apk that doesn't require me to enter a alphanumeric password every time I want to use the phone.

CM probably needs to overwrite build.prop but I've been changing the LCD density in this file. Is there a way to use a seperate file to override the lcd density so that i can let CM overwrite build.prop but still maintain lcd density after a flash?

Whatever commands you put in /data/local/userinit.sh will run at boot. So in adb shell, type this for a density of 215:
Code:
cd /data/local
echo setprop qemu.sf.lcd_density 215 >userinit.sh

awesome! thank you!
Don't suppose you would know how to get the CM update to not install/auto delete after installation apks like ADWLauncher and wifi calling?

Thank you!
This may be the long lost solution to my Swype and Cyan Problems. The new Release Candidates are destroying my swype and not liking it's return after installing the new Cyan. So, if this can basically help me update without losing much, it's a god send. Especially the LCD density.
You're a genius.
Thank you.
Hmm, seems the issue is still persistent. Thanks though.

Should userinit.sh and custom_backup_list.txt survive the upgrade or should they both be included in the backup list file?
Sent from my HTC Vision using XDA App

If you look at the actual script, it seems that it ignores the backuptool if .installscript exists, and in practice, I've noticed that nothing gets saved when flashing via ROM Manager. Is this, in fact, what's happening, and is there a way around it?

sundar2012 said:
awesome! thank you!
Don't suppose you would know how to get the CM update to not install/auto delete after installation apks like ADWLauncher and wifi calling?
Click to expand...
Click to collapse
You can put the following in /data/local/userinit.sh:
mount -o rw,remount /system
for apk in ADWLauncher.apk MS-HTCVISION-KNT20-02.apk
do
rm -f /system/app/$apk
done
for package in com.android.launcher
do
pm uninstall $package
done
mount -o ro,remount /system
exit 0
Click to expand...
Click to collapse
I haven't tried this for removing the Wifi Calling app, so ymmv. I remove a much larger set of apps myself (facebook, email, live wallpapers, amazon mp3 store, DSPManager, FileManager, Browser). http://wiki.cyanogenmod.com/index.php?title=Barebones has a list of apps that can be removed safely.

@cparekh -- what e-mail app is that? Or did you just use the pre-OTA's Email.apk app?

Rc4 has the trackpad wake fm radio and speaker led fixed its workng very smooth better than rc3
Sent from my HTC Vision using XDA App

sundar2012 said:
awesome! thank you!
Don't suppose you would know how to get the CM update to not install/auto delete after installation apks like ADWLauncher and wifi calling?
Click to expand...
Click to collapse
Just delete them from the cmupdate.zip before flashing. Cwm recovery doesn't require sig so u don't have to worry about resigning it.
OP: nice find, I'm sure ill use it at some point.

This is driving me crazy because I know I have used this command before but i cannot get it to work now... What is the deal?
Code:
$ mount -o remount,rw /system
Usage: mount [-r] [-w] [-o options] [-t type] device directory
Rooted using gfree on this phone. On my previous phone I used wpthis and did not have a problem. Anyone know what I need to do to mount rw?

cparekh said:
Thanks! This is great; now I can easily keep my Email.apk that doesn't require me to enter a alphanumeric password every time I want to use the phone.
Click to expand...
Click to collapse
I need that apk
Sent from my HTC Vision using XDA App

Used this method to when going from stock to CM 6.1.1 and could not get it to work. I had to push/install manually from ADB.
Anyone had any luck? I did what the OP said then flashed. Was I supposed to do anything after flashing wiping and then flashing (CM & gapps)?

rraxda said:
This is driving me crazy because I know I have used this command before but i cannot get it to work now... What is the deal?
Code:
$ mount -o remount,rw /system
Usage: mount [-r] [-w] [-o options] [-t type] device directory
Rooted using gfree on this phone. On my previous phone I used wpthis and did not have a problem. Anyone know what I need to do to mount rw?
Click to expand...
Click to collapse
Make sure you have root in the shell by typing su.

cparekh said:
Thanks! This is great; now I can easily keep my Email.apk that doesn't require me to enter a alphanumeric password every time I want to use the phone.
Click to expand...
Click to collapse
IConrad01 said:
@cparekh -- what e-mail app is that? Or did you just use the pre-OTA's Email.apk app?
Click to expand...
Click to collapse
chubb16 said:
I need that apk
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I am also interested in that apk

How can I backup progress on Angry Birds? Drives me nuts starting back over when I reflash CM

Titanium backup. You can use it to restore the app and the data. Usually i just restore the data to a fresh install.

[Q] How to delete files/folders from /sdcard?

After rooting my Galaxy Nexus with Wug's Root Toolkit and sim unlocking with the Docomo hack, and then restoring my apps/data (can't recall if I restored from GN Toolkit or Root Toolkit), my camera app was messed up--could snap pix but they didn't save; and video always fc'ed. The solution turns out to be to rename or delete the DCIM folder. I couldn't delete--so I renamed. Now I am trying to delete that DCIM.old folder and contents (eating up 1+G on my storage), but cannot delete either individual files or the folder. I'm sure there is a simple solution, but I can't find it. Help (even with a condescending attitude ) much appreciated!
zzcat

If you use a file explorer, that has it's standard directory at / then all you need to do is navigate to /mnt/sdcard/ then make sure it's mounted as R/W and not R/O, if all that is the way I said it, you shouldn't have problems deleting anything, if so, use the ADB and type:
Code:
adb shell rm /mnt/sdcard/<Folder>
That should then do the trick

You could also try the following Apps:
- Rootexplorer (paid)
- Astro File Manager

familyguy59 said:
If you use a file explorer, that has it's standard directory at / then all you need to do is navigate to /mnt/sdcard/ then make sure it's mounted as R/W and not R/O, if all that is the way I said it, you shouldn't have problems deleting anything, if so, use the ADB and type:
Code:
adb shell rm /mnt/sdcard/<Folder>
That should then do the trick
Click to expand...
Click to collapse
FamilyGuy, thanks for the suggestion, the problem seems to be bad permissions and I can't figure out how to fix them. Tried the "fix permissions" from recovery, as well as when booted, to no avail.
Typing
adb shell rm -rf /[directory]
gives me "permission denied"
So tried
chmod 666 /sdcard/.../*
but get an "operation not permitted" message.
So I'm really stuck here...

familyguy59 said:
If you use a file explorer, that has it's standard directory at / then all you need to do is navigate to /mnt/sdcard/ then make sure it's mounted as R/W and not R/O, if all that is the way I said it, you shouldn't have problems deleting anything, if so, use the ADB and type:
Code:
adb shell rm /mnt/sdcard/<Folder>
That should then do the trick
Click to expand...
Click to collapse
Update: solved
boot into recovery mode
mount /data
adb shell
rm, rmdir etc. all work as expected from here, no need to chown or chmod anything
zz

I see you've solved this, but i thought i would throw this in anyway...
The easy way is to delete the files from /data/media
The sdcard directory is a symlink, so go to the true folder and you should have more success...

Sometimes the file ownerships get messed up after a cycle of recovering the OS and restoring files.
http://forum.xda-developers.com/showthread.php?t=1515291&page=2
If you have any other directories/files that you can't modify or delete, then boot into CWM recovery, plug in the USB cable, go into adb shell. Also make sure that /data is mounted in the CWM mounts menu. Then:
cd /data/media
chown -R media_rw.media_rw *
This fixed it for me and others.

cmstlist said:
Sometimes the file ownerships get messed up after a cycle of recovering the OS and restoring files.
http://forum.xda-developers.com/showthread.php?t=1515291&page=2
If you have any other directories/files that you can't modify or delete, then boot into CWM recovery, plug in the USB cable, go into adb shell. Also make sure that /data is mounted in the CWM mounts menu. Then:
cd /data/media
chown -R media_rw.media_rw *
This fixed it for me and others.
Click to expand...
Click to collapse
Thanks for this and other suggestions--my solution was trial and error, thrashing around in the dark (my unix command line chops are really, really rusty), and these are far more elegant. It's good to understand the underlying problem, your wisdom is appreciated.
Yes, permissions were messed up after rooting and applying a sim unlock hack, wiping and restoring from pre-unlock backup set. I see it so clearly now...

Problem can somebody help me?
Hello. I have a problem with my motorola defy+ running on gb 2.3.6 and is not ROOTED. Still he has an annoyng problem. After installing an aplication (not from the market) i saw that it didn't save data on the sd card. I uninstalled it and after a data factory reset i install apps such as temple run and Brother in Arms 2. At temple run it gave me this mesage
"File Access Problem Caution, unable to write files. This means your game progress can't be saved! Reason: Access to the path "/mnt/sdcard/Android/data/com.imangi.templerun/files/spaceholder.dat" is denied."
Also at Brother in Arms 2 the game didn't save. I rest the phone abouat 7-8 times.I changed the sd card. Note that the card was a 16 gb kingmax class 6 and put the 2 gb card that came with the phone. It all work smoothly. So what is the problem the sd card or the phone's software. Please answer i'm desparate and tired of wasting time.

This thread is about the Samsung Galaxy Nexus which has no external SD and uses a very different storage structure. I'm afraid we can't really help you here. Try the Defy forum.
Sent from my Galaxy Nexus using Tapatalk 2

zzcat said:
FamilyGuy, thanks for the suggestion, the problem seems to be bad permissions and I can't figure out how to fix them. Tried the "fix permissions" from recovery, as well as when booted, to no avail.
Typing
adb shell rm -rf /[directory]
gives me "permission denied"
So tried
chmod 666 /sdcard/.../*
but get an "operation not permitted" message.
So I'm really stuck here...
Click to expand...
Click to collapse
Before chmod the folder, you needed to be root by entering 'su' after 'adb shell' .
It worked from cwm, because cwm gives root access.
Linux/Android are all about permissions.
Sent from my i9250

cmstlist said:
Sometimes the file ownerships get messed up after a cycle of recovering the OS and restoring files.
http://forum.xda-developers.com/showthread.php?t=1515291&page=2
If you have any other directories/files that you can't modify or delete, then boot into CWM recovery, plug in the USB cable, go into adb shell. Also make sure that /data is mounted in the CWM mounts menu. Then:
cd /data/media
chown -R media_rw.media_rw *
This fixed it for me and others.
Click to expand...
Click to collapse
I tried your theory, and it didn't work, still get the message" unable to change ownership permission denied, in recovery mode.
we are still trying to find a solution, here is the discussion: http://www.slatedroid.com/topic/32434-i-got-my-smartq-t20/page__st__260 on Post # 277

rocketero said:
I tried your theory, and it didn't work, still get the message" unable to change ownership permission denied, in recovery mode.
we are still trying to find a solution, here is the discussion: http://www.slatedroid.com/topic/32434-i-got-my-smartq-t20/page__st__260 on Post # 277
Click to expand...
Click to collapse
Sorry to hear that. It sounds like the problem you are having is with a completely different device, so I can't really say why this may be occurring - I don't know how your device's file system is structured. This advice is specifically for the Galaxy Nexus. If a version of CWM exists for your smartQme device, I can't speak to whether it works properly and interprets commands the same way ours does.

cmstlist said:
Sorry to hear that. It sounds like the problem you are having is with a completely different device, so I can't really say why this may be occurring - I don't know how your device's file system is structured. This advice is specifically for the Galaxy Nexus. If a version of CWM exists for your smartQme device, I can't speak to whether it works properly and interprets commands the same way ours does.
Click to expand...
Click to collapse
it's a 9.8 inches tablet branded named called "LePanII'. it has ICS now, before we had Honeycomb 3.2.1.
The manufacture of this tablet did such a bad partitioning that the /system partition was left only with merely 4MB of free space in it.

rocketero said:
it's a 9.8 inches tablet branded named called "LePanII'. it has ICS now, before we had Honeycomb 3.2.1.
The manufacture of this tablet did such a bad partitioning that the /system partition was left only with merely 4MB of free space in it.
Click to expand...
Click to collapse
Good luck with your issue. I doubt it's related to the one we were having on the GNex though.

cmstlist said:
Sometimes the file ownerships get messed up after a cycle of recovering the OS and restoring files.
http://forum.xda-developers.com/showthread.php?t=1515291&page=2
If you have any other directories/files that you can't modify or delete, then boot into CWM recovery, plug in the USB cable, go into adb shell. Also make sure that /data is mounted in the CWM mounts menu. Then:
cd /data/media
chown -R media_rw.media_rw *
This fixed it for me and others.
Click to expand...
Click to collapse
Sorry if my question is dumb.
Does this command solve the problem for all the folders and sub-folders in sdcard? Thank you for your help!
Sent from my Galaxy Nexus

/data/media # chown -R media_rw.media_rw*
BusyBox v1.20.2-jb static (2012-10-25 21:29 +0100) multi-call binary.
Usage: chown [-RhLHP]... OWNER[<.|:>[GROUP]] FILE...
Change the owner and/or group of each FILE to OWNER and/or GROUP
-R Recurse
-h Affect symlinks instead of symlink targets
-L Traverse all symlinks to directories
-H Traverse symlinks on command line only
-P Don't traverse symlinks (default)
I got this after giving the commands from recovery in adb shell.
What does that mean?

Jar3112 said:
/data/media # chown -R media_rw.media_rw*
BusyBox v1.20.2-jb static (2012-10-25 21:29 +0100) multi-call binary.
Usage: chown [-RhLHP]... OWNER[<.|:>[GROUP]] FILE...
Change the owner and/or group of each FILE to OWNER and/or GROUP
-RRecurse
-hAffect symlinks instead of symlink targets
-LTraverse all symlinks to directories
-HTraverse symlinks on command line only
-PDon't traverse symlinks (default)
I got this after giving the commands from recovery in adb shell.
What does that mean?
Click to expand...
Click to collapse
OK solved, I forgot the space before the *!
Worked like a charm!!
Sent from my Galaxy Nexus

[modules] cifs.ko, md4.ko, nls_utf8.ko, stock [4.2 / 4.2.2] 3.4.5-g4e6298b / gaf9c307

I have managed to get CIFS working on stock Nexus 10.
It's quite a bit more problematic on the Nexus 10 than normal.
There are 2 main issues to deal with. Newer versions of the Linux kernel require a UNC variable to be passed to them and the current version of busybox doesn't do this. There is a patch out. I have extracted the patched busybox binary from craigacomez's AOSP Nexus 10 rom.
(Check it out here: http://forum.xda-developers.com/showthread.php?t=1998585 ). Otherwise it should work on the stock mount command if you specify the unc= mount option with the share.
The other issue is the multiuser stuff. If you execute the mount command from inside Terminal Emulator (or a script program) it looks like it mounts ok and you can 'ls' in the directory but it doesn't work for Android apps, they just see an empty directory but if you do it via a 'adb shell' it works fine in Android apps. My theory is ADB is outside of the multiuser stuff. adb actually ships on the device.
1) Unlock bootloader (fastboot oem unlock)
2) Flash recovery adb flash recovery whatever.img
3) Root device (flash CWM-SuperSU-0.98.zip)
4) Install BusyBox (from the market)
5) Copy md4.ko and cifs.ko to device. The files can go anywhere you like. In this example I will just use the root of the sdcard. Some people like them in /system/modules or /system/lib/modules
6) busybox mount -o rw,remount /
7) adb shell
8) Override /system/bin/busybox with the patched version (maybe move it first so it's backed up).
9) insmod /sdcard/md4.ko
10) insmod /sdcard/cifs.ko
11) busybox mount -t cifs -o username=MYUSER,password=MYPASS,unc=\\\\192.168.1.1\\storage //192.168.1.1/storage /data/media/0/cifs/Storage
You will need to manually preform the last 3 commands each time you reboot the device from a adb shell.
NOTE: You can probably get rid of the -o flags completely. In theory the patched version of busybox makes the UNC bit redundant. Possibly you can use the stock busybox with the UNC flag and avoid using the patched one totally. I have just included it to be sure.
Make sure you type 'busybox mount' not 'mount', by default they are different binaries. Otherwise you can remove the /system/bin/mount command and make a new one linking /system/bin/mount to /system/bin/busybox.
Possibly there is some way to get the mount working in the multiuser environment without requiring busybox. If you figure it out please tell ☺
Some threads on the issue:
http://forum.xda-developers.com/showthread.php?p=34397868#post34397868
http://forum.xda-developers.com/showthread.php?t=733490&page=6
http://www.mail-archive.com/[email protected]/msg17650.html
The modules are for 3.4.5-g4e6298b.
EDIT: I added nls_utf8.ko by request
EDIT2: Since adb comes on the device, it is possible to use it to connect to local host:
1) Install cifs modules to /system/lib/modules
2) Install Script Manager from the play store
3) Copy script to device
4) Start SManager
5) Find your script and open it.
6) Tick the su box
7) Hit save
8) Goto home sccreen
9) Add a 'SMShortcuts' widget to your home screen
10) "Add one script shortcut"
11) Choose your script
12) Optionally use this pretty icon ☺
13) Give it a nice name like "Mount Shares"
Here is a shell script...
Code:
#!/system/bin/sh
# Your settings here
USERNAME="USERNAME"
PASSWORD="PASSWORD"
IPADDRESS="192.168.1.1"
SHARE="storage"
MOUNT_POINT="/data/media/0/cifs/Storage"
# If you need to change the mount command edit this
MOUNT_CMD="\
mount -t cifs \
\
-o \
user=$USERNAME,\
password=$PASSWORD,\
unc=\\\\\\\\\\\\\\\\$IPADDRESS\\\\\\\\$SHARE \
\
//$IPADDRESS/$SHARE \
$MOUNT_POINT"
COMMANDS="\
insmod /system/lib/modules/md4.ko; \
insmod /system/lib/modules/nls_utf8.ko; \
insmod /system/lib/modules/cifs.ko; \
$MOUNT_CMD
"
# Starting ADB...
PORT=`getprop service.adb.tcp.port`
setprop service.adb.tcp.port 5555
adb kill-server
adb start-server
stop adbd
start adbd
adb connect localhost
# Make sure we only use the first device (sometimes there is more than one)
SERIAL=`adb devices | head -n2 | tail -n1 | cut -f1`
if [ "$SERIAL" = "" ] ; then
echo "ERROR: Could not find ADB device.";
fi
echo Mounting share via adb...
adb -s $SERIAL shell su root -c "$COMMANDS"
# If you started adb, then stop it here for security:
adb disconnect localhost
stop adbd
setprop service.adb.tcp.port $PORT
start adbd
RESULT=`mount | grep $MOUNT_POINT`
if [ "$RESULT" = "" ] ; then
echo "Mounting failed..."
else
echo "Mounting sucess!"
fi
echo Done... You may close this script window.
EDIT3: Added usbserial.ko, option.ko and usb_wwan.ko
EDIT4: Some users have reported that the need to modify the script to get it working with their version of SU.
EDIT5: I have uploaded modules for 4.2.2, kernel 3.4.5-gaf9c307 but I haven't actually tested them myself (still on 4.2.1). Apparently the adb loophole has also been patched but it is possible to reenable it by putting a RSA key onto the device. Check out this set of instructions here.
EDIT6: I have updated to 4.2.2 on my Nexus 10 and can confirm the new modules work.
You must setup the adbkey or you will get a "device: offline" message. By default adb when adb first runs it tries to create the keys in the $HOME dir which is /data/.android, but the data directory isn't accessible by the 'shell' user.
I got it working simply by setting the HOME variable to /sdcard and restarting the adb server in the script then Android popped up a query (I have update the script above).
IMPORTANT: The Android Media scanner recursively scans folders for media to add the the database so it shows up in programs like Google Music. On large shares this can be a long process and use heaps of battery life. To prevent this add a blank file with the name ".nomedia" to the root of your mount points (or each individual share if you aren't used 1 folder for all your mounts). This will stop music showing up in programs though.
If you find that the device stops responding (the launcher might work but apps fail to load) or you get reboots (often after the previous bug) this is probably due to a bad wifi connection.

Is it posible to make a CWM flash file?

Great
This is great progress, do you know if there is some way I can use the same to mount my usb OTG with ADB shell so that I can read/write to my pen drives from my android apps/file managers?
I have tried using the busybox mount but that didn't work, do I need the modified mount or will none of this help anyway?

alias_neo said:
This is great progress, do you know if there is some way I can use the same to mount my usb OTG with ADB shell so that I can read/write to my pen drives from my android apps/file managers?
I have tried using the busybox mount but that didn't work, do I need the modified mount or will none of this help anyway?
Click to expand...
Click to collapse
Code:
busybox mount -t FSTYPE /dev/block/sda1 MOUNT_LOCATION
Example:
Code:
busybox mount -t vfat /dev/block/sda1 /storage/sdcard0/usbotg

craigacgomez said:
Code:
busybox mount -t FSTYPE /dev/block/sda1 MOUNT_LOCATION
Example:
Code:
busybox mount -t vfat /dev/block/sda1 /storage/sdcard0/usbotg
Click to expand...
Click to collapse
How is this different to what I'm doing already? Mounting this way doesn't work, only the process that mounted it can see the files.

Although I don't have nexus 10, I am having the similar mounting issue on my nexus 7 until I saw this post.
Advise about "adb shell" really helps me resolve the multiuser issue.
Thanks for sharing.

Any chance you could post the nls-utf8.ko for utf8 support?
Thanks!

H3g3m0n said:
1) Unlock bootloader (adb oem unlock)
Click to expand...
Click to collapse
Isn't it fastboot that unlocks the bootloader, and not adb? (unless adb can do it too; I've only heard of fastboot though)

momulah said:
Is it posible to make a CWM flash file?
Click to expand...
Click to collapse
Not a high priority right now as currently you need to do the manual adb shell stuff by hand to get things mounted, a little extra setup work isn't a huge difference.
alias_neo said:
How is this different to what I'm doing already? Mounting this way doesn't work, only the process that mounted it can see the files.
Click to expand...
Click to collapse
Are you mounting in a 'adb shell' or locally in something like terminal emulator? My OTG cable won't be here for a while so I can't really test myself.
weasal said:
Any chance you could post the nls-utf8.ko for utf8 support?
Thanks!
Click to expand...
Click to collapse
Posted, haven't tested it but it seemed to insmod fine.
espionage724 said:
Isn't it fastboot that unlocks the bootloader, and not adb? (unless adb can do it too; I've only heard of fastboot though)
Click to expand...
Click to collapse
Yeh typoed, i'll fix that now.
Currently I'm thinking of ways to hack around the 'adb shell' requirement, as a basic hackish fix would be to make a program that turns on adb wireless, connects to the local device and issues a command. Of course possibly there is a 'proper' way to do mounting. Another lazy way for those with their shares on a Linux system would be a script issue commands to the server via a ssh, getting it to log back into the phone and mount stuff over adb wireless.

alias_neo said:
How is this different to what I'm doing already? Mounting this way doesn't work, only the process that mounted it can see the files.
Click to expand...
Click to collapse
I've been working on getting OTG support natively in my AOSP based custom ROM and I have had some success... check out my ROM for details

H3g3m0n said:
Currently I'm thinking of ways to hack around the 'adb shell' requirement, as a basic hackish fix would be to make a program that turns on adb wireless, connects to the local device and issues a command. Of course possibly there is a 'proper' way to do mounting. Another lazy way for those with their shares on a Linux system would be a script issue commands to the server via a ssh, getting it to log back into the phone and mount stuff over adb wireless.
Click to expand...
Click to collapse
Just wanted to thank H3g3m0n as I was able to successfully mount over adb. Also came up with a workaround to bypass connecting to a PC, grabbed the arm fastboot binary from this thread and installed it on my nexus 7. Used it to connect wireless adb on the 10 and ran the mount commands on the 7.

H3g3m0n said:
Posted, haven't tested it but it seemed to insmod fine.
Click to expand...
Click to collapse
Thanks, I'll give it a try!

You might find my posts #156 and #162 at http://forum.xda-developers.com/showthread.php?t=1781411&page=17 helpful.

Sorry for the noob ? ...
What are the KO's do?
What is the practical use of then.
Sorry I did a little research on then but I could not find an answer in layman terms
Thank you for allowing me to learn.
Sent from my toroplus using xda premium

spdwiz18 said:
Sorry for the noob ? ...
What are the KO's do?
What is the practical use of then.
Sorry I did a little research on then but I could not find an answer in layman terms
Thank you for allowing me to learn.
Sent from my toroplus using xda premium
Click to expand...
Click to collapse
http://en.wikipedia.org/wiki/Loadable_kernel_module

craigacgomez said:
http://en.wikipedia.org/wiki/Loadable_kernel_module
Click to expand...
Click to collapse
That helps allot.... Now i have an understanding of ko's in general. But what specificly do the modules this thread refers to do and the practical use of then. Thanks foot the help.
Sent from my toroplus using xda premium

spdwiz18 said:
That helps allot.... Now i have an understanding of ko's in general. But what specificly do the modules this thread refers to do and the practical use of then. Thanks foot the help.
Sent from my toroplus using xda premium
Click to expand...
Click to collapse
These modules are needed to enable support for CIFS (Windows share) mounts...

spdwiz18 said:
That helps allot.... Now i have an understanding of ko's in general. But what specificly do the modules this thread refers to do and the practical use of then. Thanks foot the help.
Sent from my toroplus using xda premium
Click to expand...
Click to collapse
Basically you can setup a shared folder from a remote computer. It allows you to have files on another system accessible as if it was part of the internal storage in the device.

Just found out that Android ships with the adb binary on the device itself (after crosscompiling it myself :/, oh well the experience was useful).
It should be possible to setup a script to start the adb server, connect to the localhost and execute the mount without too much difficulty.

Ok, added a script and instructions to the front page for simple on tablet mounting.

[Q] Why can't I mount 'System' on Nexus 7 (2013) ?

Hi,
A few days ago, I did unlock and root my N7 (2013) using "Nexus Root Toolkit (v.1.6.8)" by WugFresh. I followed the instructions to the letter and everything went OK, it seemed. My N7 (JSS15J) is unlocked and I have root access, as confirmed by "Titanium Backup" and "Root Checker Pro" app.
However, my N7 cannot mount "System" - which is why I cannot delete any system app bloatware (also confirmed by "System App Remover" & Root Checker Pro app). When rooting my N7 (2012) and my SGS3, everything worked just perfectly and I never had these kind of issues...
I did factory-reset a number of times, went through the unlock/root process again, rooted again via UPDATE-SuperSU-v1.51.zip etc etc. - no dice. TWRP v2.6.0.0 is installed and working. I also installed & updated BusyBox, and I wiped of Dalvik - but still no root access to "System", or "mount".
As I just found out, "Root Checker Pro" actually explains why I can't mount "System" and/or don't have root access... I just don't know what to do about it:
Congratulations! You have root access!
Super User Application Status:
SuperSU application - version 1.51 - is installed!
System File Properties for Root Access:
Standard Location
Check Command: ls -l /system/bin/su:
Result: /system/bin/su: No such file or directory
Analysis: File /system/bin/su does not exist.
Standard Location
Check Command: ls -l /system/xbin/su:
Result: -rwsr-sr-x root root 112164 2008-08-01 07:00 su
Analysis: Setuid attribute is present and root user ownership is present. Root access is correctly configured for this file! Executing this file can grant root access!
Alternative Location
Check Command: ls -l /sbin/su:
Result: /sbin/su: Permission denied
Analysis: File system permissions restricted and denied access.
Alternative Location
Check Command: ls -l /system/xbin/sudo:
Result: /system/xbin/sudo: No such file or directory
Analysis: File /system/xbin/sudo does not exist.
Root User ID and Group ID Status:
Root user id:
uid=0(root)
Root group id:
gid=0(root)
System Environment PATH: /sbin /vendor/bin /system/sbin /system/bin /system/xbin
ADB Shell Default User:
ADB shell setting for standard access, stored in default.prop, is configured as: shell (non root) user - ro.secure=1
Results provided on your Nexus 7 device by Root Checker Pro version 1.3.4 from joeykrim in the Android Market - http://goo.gl/NcnHn
What did I miss?
Can someone please help me to install whatever is needed to gain root access to "System"? "System App Remover" app shows that "System" is not mounted but downloading a separate "mount app" did not do the trick either...
Thanks for your help & suggestions, guys!

System is already mounted or you wouldn't be running android.
What you probably want to do is "remount"
mount -o remount,rw /system /system
But if all you want is to remove apps, perhaps it is easier if you just use Titanium to freeze them first and once you are sure you don't need them you can delete them, but I would just leave them frozen.

sfhub said:
System is already mounted or you wouldn't be running android.
What you probably want to do is "remount"
mount -o remount,rw /system /system
But if all you want is to remove apps, perhaps it is easier if you just use Titanium to freeze them first and once you are sure you don't need them you can delete them, but I would just leave them frozen.
Click to expand...
Click to collapse
Thanks, sfhub... I'll give that a try!

Doesn't look good, I'm afraid:
C:\platform-tools>mount -o remount,rw /system /system
'mount' is not recognized as an internal or external command,
operable program or batch file.
Click to expand...
Click to collapse
Any further suggestions, please?

androidarmin said:
Doesn't look good, I'm afraid:
Click to expand...
Click to collapse
Seems like I tried in the wrong place... I'll give it another try; sorry

Well... downloaded a Terminal Emulator from Google Play..
But now I'm getting a "mount: Operation not permitted" error...

Googled a ton and found a lot of good advice... and even figured things out using ADB (hint: adb shell) - but nothing worked in the end.
Seems like my "SU" may be the culprit, but I'll figure things out when I have more time... meaning, on the weekend. Probably go back to stock and then start over. Seems to be the simplest way right now.
Thanks so far, guys!

androidarmin said:
Well... downloaded a Terminal Emulator from Google Play..
But now I'm getting a "mount: Operation not permitted" error...
Click to expand...
Click to collapse
In adb, you need to type su first to give yourself root privileges before you can mount /system

You need to mount system as read/write in order to remove apps from it.
Sent from my Nexus 7 (2013)

Thanks, sfhub & Muikkuman... I know/I did. Still doesn't work.
Sent from my GT-I9300 using Tapatalk 4

androidarmin said:
Thanks, sfhub & Muikkuman... I know/I did. Still doesn't work.
Click to expand...
Click to collapse
what happens if you do in a command prompt in your adb directory
adb shell
su

Yes this seem strange.
Sent from my Nexus 7 (2013)

My suggestion would be to update TWRP, back-up important data, format data in recovery, look for decent rom, flash rom/gapps/latest supersu.
Then go to 'advanced' in recovery and fix permissions. Reboot recovery and tick 'mount' 'system', respectively install root file explorer of your liking.
No quick solution but should do the trick..

My suggestion is DO NOT delete anything, period. Nurse disable from settings or use pm disable.
Deleting stuff is completely pointless and WILL cause you problems in the future.

androidarmin said:
Thanks, sfhub & Muikkuman... I know/I did. Still doesn't work.
Sent from my GT-I9300 using Tapatalk 4
Click to expand...
Click to collapse
Dont know if you got this sorted. i was having the same problem with my son's Nexus 7 and came across this tutorial for Total Commander
http://www.androidpolice.com/2011/0...ns-remount-rw-in-total-commander-for-android/
Great little short cut to get the job done and can now get Total Commander free on Google Play.