hi every body,
some of us don't want to use adoptable storage for some reason .
here in this discussion thread may be we find solution.
guide :-
1- flash this disable_selinux.zip
thanx @bonobo and @cucumber09
details in this [/MENTION] post
For other users "you must have permissive mode" search for it in your device section.
2- flash this version of supersu
Use only this special version
3- install this apps2sd from here http://forum.xda-developers.com/android/apps-games/apps2sd-partition-sd-card-link-apps-to-t3122919
thanx to @vickybonick
that's it:laugh: ,
PLEASE SHARE WITH US THE RESULTS
EDIT:-
Now it's worked perfectly see this post
kh34d said:
hi every body
some of us don't want to use adoptable storage for some reason .
here in this discussion thread may be we find solution
guide :-
1- flash this disable_selinux.zip
thanx @bonobo and @cucumber09
details in this [/MENTION] post
2- flash this version of supersu
Use only this special version
3- install this apps2sd from here http://forum.xda-developers.com/android/apps-games/apps2sd-partition-sd-card-link-apps-to-t3122919
thanx to @vickybonick
that's it:laugh: ,
PLEASE SHARE WITH US THE RESULTS
Click to expand...
Click to collapse
Thanks for this but before trying wanted to ask you will it partition the sd card? Can it work like cm12.1? What are the effects or problems you saw in disabled SElinux on our nicki? And will a nandroid backup restore all the things back?
Why link2sd dont work with cm13?
nikola1970 said:
Why link2sd dont work with cm13?
Click to expand...
Click to collapse
there's error in script of mount 2nd partition , may be Development in progress.
Adarsh Dubey said:
Thanks for this but before trying wanted to ask you will it partition the sd card? Can it work like cm12.1? What are the effects or problems you saw in disabled SElinux on our nicki? And will a nandroid backup restore all the things back?
Click to expand...
Click to collapse
it not worked 100% with me ,but i will try again especially adoptable didn't work with me becoz my class of card is 4 (too slow).
you must use mini tool partition first like usual.
i didn't notice any problem with disabled SElinux.
i don't know about a nandroid backup restore, but t have a try
I installed busy box and use partition tool inside Apps2sd and make two partition.
Mount script succesd, but second partition is corrupt I don't know why?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit :-
unfortunately after i update my rom i have to install busy box again and recreate mount script.
Edit:-
we need addon.d-script for busy box and mount script that will be automatically survive them after every ROM update
Well,
Dev. Of Apps2sd accept my request and released new version 7.3 thanks for him.
Any one tested it??
Hi guys,
Now it's working perfectly.
And second partition is not corrupt.
I will explain as I can later [emoji4]
Now I will try to update my rom first to see what happen. [emoji120] [emoji111]
Everything is OK, except this msg when boot up and I did soft reboot and it's OK now
this is my steps :-
1- I have permissive mode .
2- Enable USB debugging.
3- Install "universal init.d" and make it "ON".
4- Select "use public vold" in setting of apps2sd.
5- disable "Mount namespace separation" in "supersu app", and reboot your device.
6- For me, my second partition is formatted with ext2.
7- install busy box
good luck with all of you:good:
Why I can't select "use public vold"?
If I upgrade to the latest apps2sd, will I have to relink all linked apps?
nandisenjaya said:
Why I can't select "use public vold"?
If I upgrade to the latest apps2sd, will I have to relink all linked apps?
Click to expand...
Click to collapse
I have version 7.5 now and I didn't update yet, but I don't think that.
you should relink apps again.
About anther issue why you can't, is it disabled?
kh34d said:
I have version 7.5 now and I didn't update yet, but I don't think that.
you should relink apps again.
About anther issue why you can't, is it disabled?
Click to expand...
Click to collapse
Oke, I will try...
For my problem with root explorer, I've been installed root explorer 3.3.8. Is SELinux mode can give effects? SElinux mode in my phone is permissive,
nandisenjaya said:
Oke, I will try...
For my problem with root explorer, I've been installed root explorer 3.3.8. Is SELinux mode can give effects? SElinux mode in my phone is permissive,
Click to expand...
Click to collapse
No. It's not problem, I've permissive mode too.
I use ES explore pro instead of root explore now, Try it
kh34d said:
No. It's not problem, I've permissive mode too.
I use ES explore pro instead of root explore now, Try it
Click to expand...
Click to collapse
I use ES Explore too, but I more comfort use Root Explorer...
I have upgrade apps2sd to 7.5, but sdext still show corrupt on setting..
nandisenjaya said:
I use ES Explore too, but I more comfort use Root Explorer...
I have upgrade apps2sd to 7.5, but sdext still show corrupt on setting..
Click to expand...
Click to collapse
Did you fellow my steps?
Try disable option in SuperSU as I write and reboot.
kh34d said:
Did you fellow my steps?
Try disable option in SuperSU as I write and reboot.
Click to expand...
Click to collapse
Oh gosh, I forget to unthick on supersu, oke I will try to unthick and reboot thw phone...
nandisenjaya said:
Oh gosh, I forget to unthick on supersu, oke I will try to unthick and reboot thw phone...
Click to expand...
Click to collapse
Good, if I help please press [emoji106]
I have a problem. When I paprtition sd card (use Apps2sd) phone use 2st partition as a internal memory. When I create mount script 2st partition is borken (in settings) and i cant use apps like camera etc.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements:
Flashtool 0.9.13 by @Androxyde
XZDualRecovery 2.7.76 BETA or newer.
Current rooted FW version: 10.4.B.0.569, Maybe others too, let me know!.
Special features:
SuperSU integrated in system, FULL ROOT!
XZDualRecovery 2.7.86 BETA (CWM & PhilZ Touch & TWRP) pre-installed;
init.d support (read how to enable)
For both locked and unlocked bootloaders!
In the following guide I suggest you use an external SDCard but that's just good practice, you can use your internal storage or even an USB OTG storage device in TWRP if you like to install, that's no problem!... If you are modding and the likes, best is to have an external sdcard, just for safeties sake.
If you are unable to download torrent files directly, have http://zbigz.com/ do it for you!
How to update to 10.4.1.B.0.101:
Files:
For C6503: Download C6503_10.4.1.B.0.101.flashable.zip (Bittorrent: 823MB) and C6503_10.4.1.B.0.101_Stripped.ftf (17MB)
Save them somewhere you remember;
Put 'C65XX_10.4.1.B.0.101.flashable.zip' on (the external) SDcard1;
Put 'C65XX_10.4.1.B.0.101_Stripped.ftf' inside the Flashtool/firmwares folder;
Create a backup of your phone in TWRP and don't forget to backup the contents of 'SDCard' (the internal storage!);
Flash 'C65XX_10.4.1.B.0.101.flashable.zip' in TWRP;
NOTE: do not reboot but go back to the main menu, then go to reboot->power off;
Flash everything in 'C65XX_10.4.1.B.0.101_Stripped.ftf' using flashtool;
Reboot to system.
The first boot will be slow and after some time at the boot animation you will see Android start optimizing the apps on your phone.
Enjoy! :laugh:
Known XZDualRecovery Issues:
Busybox Updater/Installer: If you have XZDualRecovery installed, un-install any Busybox updating app/tool as most if not all of them will install a version of busybox which does not support the lzma compression applets XZDualRecovery depends on. The version installed together with XZDualRecovery is very stable and I have yet to hear anyone complain about it's stability.
How to report errors:
Please, before shouting out "It doesn't work!!1!" or "I lost root!" or even "My phone reboots when remounting /system RW!!" try the following:
Restore any JB 4.2.2 FTF using any means you are familiar with so you can try again.
Root it using any means you are familiar with.
Install XZDualRecovery;
Update to 10.4.B.0.569;
Then try to update again using TWRP.
If it still fails something from there on: LOGS!!.
NOTE: The important ones can be found in /cache/recovery and in /sdcard1/XZDualRecovery, pack them up and send them to me or attach them to your bug report.
Thank you
Tips and Tricks
Easy switching between locked and unlocked bootloader states!
NOTE: USE TWRP ONLY for this guide.
NOTE 2: You NEED to have XZDualRecovery 2.7.43 or higher to make this work.
Create a backup, including the Trim Area (TA!)
Unlock your bootloader
Restore backup without TA
Create a new backup of your UNLOCKED TA
Restore the previous TA backup to relock your phone.
Done :good:
Now you can switch between locked and unlocked bootloaders quick and painless: no more system wipes and you can basically do whatever you want
How to enable init.d support:
Open a filemanager app and navigate to the location where the XZDualRecovery folder is located and go in to it. Open XZDR.prop as a text file and set dr.initd.active to true.
NOTE: For this guide ROM it means the init.d script called 99SuperSUDaemon will kick in to action, so it's best to disable (by setting chmod 644) /system/etc/install-recovery.sh for the time being or to clear it's contents.
Done
And i'll have this one too, just to be sure.
sir how to update if i came from fw 569 with root,xzdr and deodex(LB)?just update it?no need to wipe?
Kylez said:
sir how to update if i came from fw 569 with root,xzdr and deodex(LB)?just update it?no need to wipe?
Click to expand...
Click to collapse
When you come from any deodexed rom you will have to at least wipe dalvik-cache
will xposed framework still able to run in this fw 101?
Possible for C6502?
Sorry, is it possible to flash this new FW to C6502?
cheetahlm said:
Sorry, is it possible to flash this new FW to C6502?
Click to expand...
Click to collapse
yes
renzzoman said:
will xposed framework still able to run in this fw 101?
Click to expand...
Click to collapse
Just give it a try, I don't use Xposed, so I can't tell you.
demonicjas said:
yes
Click to expand...
Click to collapse
Sorry, I success flashed the the 101.flashable to my C6502 but I cannot flash the stripped.ftf via flashtool. There was a message "ERROR - Error flashing. Aborted". How to solve this problem?
cheetahlm said:
Sorry, I success flashed the the 101.flashable to my C6502 but I cannot flash the stripped.ftf via flashtool. There was a message "ERROR - Error flashing. Aborted". How to solve this problem?
Click to expand...
Click to collapse
What version of flashtool are you using?
cheetahlm said:
Sorry, I success flashed the the 101.flashable to my C6502 but I cannot flash the stripped.ftf via flashtool. There was a message "ERROR - Error flashing. Aborted". How to solve this problem?
Click to expand...
Click to collapse
Maybe you need to install flashmode driver for your phone.
---------- Post added at 04:52 PM ---------- Previous post was at 04:46 PM ----------
renzzoman said:
will xposed framework still able to run in this fw 101?
Click to expand...
Click to collapse
I can confirm that Xposed Framwork (Xperia Test) won't work with this fw 101. After Install/Update and reboot, you got bootloop. Must go into TWRP to install Xposed-disabler.
I'm using xposed v2.4.1 with .101 work just fine.
Sent from my C6503 using Tapatalk
demonicjas said:
yes
Click to expand...
Click to collapse
[NUT] said:
What version of flashtool are you using?
Click to expand...
Click to collapse
Edit : Sorry, already solved the problem. Thanks.
cheetahlm said:
Edit : Sorry, already solved the problem. Thanks.
Click to expand...
Click to collapse
How did you fix it?
[NUT] said:
How did you fix it?
Click to expand...
Click to collapse
I am not sure... Just only restart the flashtool. Also after flashing the ROM dan Off (not reboot), I just On my C6502, complete the setup, and reconnect to the flashtool in flashmode. That's all friend.
Works fine, thanks NUT!
@[NUT]
Once again a beautiful and very well done job buddy. Everything working perfectly here, so far, so good.
Thanks for your continued support on out Xperias.
Best regards
already flash this 101 fw and Xposed Framework also work perfect. But it seem there is still a bug on the power button, just like in 569
I have a rooted (locked BL) 10.3.1.A.67.
Someone have any idea if this will work as well?
LOLLIPOP SD Card Write Fix (Atomatic Method)
Flashable ZIP Via Recovery (TWRP): (Flash by turning on phone with Power + Volume UP + Home Button)
Download:
http://g2k.serveftp.net/xda/tmo_n900t_extsd_fix_tekhd.zip
Now all apps will be able to write to external SD Card...
>>> This works with LolliPop stock rom... Tested already with Root Explorer, Titanium Backup, Opera, Dolphin Browser, Ttorrent... all able to perfectly write directly to external sd card. Test by copying any file to external sd card using Root Explorer.
TEKHD said:
LOLLIPOP SD Card Write Fix (Atomatic Method)
Flashable ZIP Via Recovery (TWRP): (Flash by turning on phone with Power + Volume UP + Home Button)
Download:
http://tek.serveftp.net/xda/tmo_n900t_extsd_fix_tekhd.zip
Now all apps will be able to write to external SD Card...
>>> This works with LolliPop stock rom... Tested already with Root Explorer, Titanium Backup, Opera, Dolphin Browser, Ttorrent... all able to perfectly write directly to external sd card. Test by copying any file to external sd card using Root Explorer.
> > > I just ask for a simple . . .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Doesnt work. I have N900T Lollipop Stock, its not rooted. I reboot it in stock recovery and Installed with some errors.
How I know that doesnt work: I have WiFi Transfer App, installed on phone, and folder is on phone. I moved and changed received folder on SD card, and when I send file from laptop to phone its say its interrupted. When I change received folder to phone its working. Tell me how to uninstall this what I installed with errors.
U need a custom recovery like twrp....read the OP
konfidential said:
U need a custom recovery like twrp....read the OP
Click to expand...
Click to collapse
can this be done with CWM?
Edit: I just dont want to root my N900T cause I see that a lot of ppl have issues after they rooted their Lollipop phones.
markokrstic said:
can this be done with CWM?
Edit: I just dont want to root my N900T cause I see that a lot of ppl have issues after they rooted their Lollipop phones.
Click to expand...
Click to collapse
Idk.. But you can try... Do a back up first
markokrstic said:
can this be done with CWM?
Edit: I just dont want to root my N900T cause I see that a lot of ppl have issues after they rooted their Lollipop phones.
Click to expand...
Click to collapse
can is a custom recovery that you have to be rooted to install
calexchelse said:
can is a custom recovery that you have to be rooted to install
Click to expand...
Click to collapse
well I gave up. I installed CWM and after update super su my screen dont want to show up. I flashed 5.0 stock with Odin to fix that.
markokrstic said:
well I gave up. I installed CWM and after update super su my screen dont want to show up. I flashed 5.0 stock with Odin to fix that.
Click to expand...
Click to collapse
By installing a custom recovery, your Knox counter is now tripped forever. Now you might as well reroot and customize to your heart's content!
JimSmith94 said:
By installing a custom recovery, your Knox counter is now tripped forever. Now you might as well reroot and customize to your heart's content!
Click to expand...
Click to collapse
And for what I need KNOX? I live in EU lol
markokrstic said:
And for what I need KNOX? I live in EU lol
Click to expand...
Click to collapse
Sorry, you said you were stock unrooted, so I thought you wanted to stay that way.
JimSmith94 said:
Sorry, you said you were stock unrooted, so I thought you wanted to stay that way.
Click to expand...
Click to collapse
no worries sir. Lollipop stock without root works fine, only that SD card write is issue, but ok, I can copy files from phone to card in file manager manually.
Hey @TEKHD will this work on DomPop v4.3?
AllanonX said:
Hey @TEKHD will this work on DomPop v4.3?
Click to expand...
Click to collapse
No... DomPop 4.x is based on Note 4... This file is for FOB6 (T-Mobile Lollipop 5 Note 3) Don't try it.
TEKHD said:
No... DomPop 4.x is based on Note 4... This file is for FOB6 (T-Mobile Lollipop 5 Note 3) Don't try it.
Click to expand...
Click to collapse
Copy that! Thanks for the info sir. Do you know of a working mod for 4.x? Thanks again in advance
AllanonX said:
Copy that! Thanks for the info sir. Do you know of a working mod for 4.x? Thanks again in advance
Click to expand...
Click to collapse
click on note 4 on my signature...
post #2
add that line... reboot... voila...
Is there anyway to do this manually on a rooted LG G3?
I dont have a custom recovery to flash the first file.
Cheers
MMM
Works fine with CM12.1 on my Xperia Z2. Thanks!
TEKHD said:
LOLLIPOP SD Card Write Fix (Atomatic Method)
Flashable ZIP Via Recovery (TWRP): (Flash by turning on phone with Power + Volume UP + Home Button)
Download:
http://tek.serveftp.net/xda/tmo_n900t_extsd_fix_tekhd.zip
Now all apps will be able to write to external SD Card...
>>> This works with LolliPop stock rom... Tested already with Root Explorer, Titanium Backup, Opera, Dolphin Browser, Ttorrent... all able to perfectly write directly to external sd card. Test by copying any file to external sd card using Root Explorer.
Click to expand...
Click to collapse
I have a note4 910c with Stock Rom Lollipop will it works fine without any Problem ?? download link is dead kindly post new link thank you
annus9214 said:
I have a note4 910c with Stock Rom Lollipop will it works fine without any Problem ?? download link is dead kindly post new link thank you
Click to expand...
Click to collapse
This was answered 5 posts above yours. Use the search on the right next time...
Thank You
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lenovo A7000 MIUI 7 PRO TWRP FLASHABLE
VERY SMOOTH UI,STABLE,FAST RESPONSE AND MUCH MORE.
The phone also heat very less as compared to stock and charge fast.
DOWNLOAD LINK:https://cloud.mail.ru/public/GMZC/wXiwovdmG
How To Install Rom :
1.Download the rom from above.
2.copy it to sd card.
3.boot into recovery mode with twrp(recommended).
4.wipe data or factory reset.
5.now navigate to install from sd card i.e flash the rom.
5.you're done
First boot will take 8-10 minutes after rom installation.
WARNING DO NOT ROOT WITH FLASH ZIP THE DEVICE WILL STUCK AT BOOT.
FOR "ROOT ACCESS" scroll down and see the 2nd reply in this thread.
SoundMod:1.ViPER4Android for best music listening experience.
http://forum.xda-developers.com/android/development/viper4android-lenovo-a7000-t3253287/post63922812#post63922812
2.Dolby atmos:--::To install just flash the package with any cwm or twrp recovery.
Download link:click here
Special thanks to WIZARD.(the rom developer)
WHATEVER YOU DO AT THIS AT YOUR OWN RISK. NEITHER ME NOR XDA WILL BE RESPONBILE IN CASE OF ANY HARDWARE/ SOFWARE DAMAGES CAUSED BY YOU TRYING THESE METHODS. YOU WILL BE SOLELY RESPONSIBLE.
PLEASE TAP THANKS IF YOU LIKE THE ROM:good::good:
Please give more specific details about bugs, changelogs, etc,. You said it was bugless, really that it has no more bugs beside the LED? Also is the SD Card Storage working ???
Root access on miui 7
1.First install the SuperSU app from play store or manually.
2.Then open it,after opening it will prompt to update binary,update it.
But in a min you will see update binary is failed DON'T WORRY just close the app.
3.Now Open the miui security app.
4.Then go to permission option in that security app.
5.In permission option their is root access option.In that give root access to supersu.
6. Now go back to SuperSU,it will prompt to install binary install it.
7.REBOOT THE PHONE..... NOW YOU CAN USE SUPERSU FOR ROOT ACCESS AS IT WORK IN EVERY DEVICE.
Can we select default storage disk as SD card???
Play store included?
gapps included
Arvind Balaji said:
Play store included?
Click to expand...
Click to collapse
Yes playstore with latest version included v5.10.29
PrashantRana said:
Yes playstore with latest version included v5.10.29
Click to expand...
Click to collapse
Woowii thanks for reply gonna install it in 1 hr.. BTW is there default write disk to SD??
Arvind Balaji said:
Woowii thanks for reply gonna install it in 1 hr.. BTW is there default write disk to SD??
Click to expand...
Click to collapse
Default write disk to SD is not available but otherwise the ROM is very good and smooth.If u want u can use viper4android to make sound quality brilliant. For that I am adding the package link to the thread soon.:good::good:
PrashantRana said:
Default write disk to SD is not available but otherwise the ROM is very good and smooth.If u want u can use viper4android to make sound quality brilliant. For that I am adding the package link to the thread soon.:good::good:
Click to expand...
Click to collapse
Osmmm rom installed it.. One problem... The battery charge logo when power off is slightly scrambled.. Can u fix it?
---------- Post added at 09:29 PM ---------- Previous post was at 09:29 PM ----------
It is prob in boot.img cos after I reflashed stock boot.img it was fixed but u know the rom won't boot up I ..flashed it just to see where the prob was.. Thanks for osm rom BTW..
Reply fast prashanth brooo
Root miui7
Arvind Balaji said:
Reply fast prashanth brooo
Click to expand...
Click to collapse
Bro see the 2 reply in this thread I have given the method to root it.
Root access on miui7
1.First install the SuperSU app from play store or manually.
2.Then open it,after opening it will prompt to update binary,update it.
But in a min you will see update binary is failed DON'T WORRY just close the app.
3.Now Open the miui security app.
4.Then go to permission option in that security app.
5.In permission option their is root access option.In that give root access to supersu.
6. Now go back to SuperSU,it will prompt to install binary install it.
7.REBOOT THE PHONE..... NOW YOU CAN USE SUPERSU FOR ROOT ACCESS AS IT WORK IN EVERY DEVICE.
Will it be possible to use sd card as default write disk in future...?
vishnu_9009 said:
Will it be possible to use sd card as default write disk in future...?
Click to expand...
Click to collapse
No I don't think so.. Cos in all MIUI roms I haven't seen this feature... Anyways I'm on stock firmware s152 . and I'm gonna stick to it till any new and good rom with default write disk feature
Arvind Balaji said:
No I don't think so.. Cos in all MIUI roms I haven't seen this feature... Anyways I'm on stock firmware s152 . and I'm gonna stick to it till any new and good rom with default write disk feature
Click to expand...
Click to collapse
K, even i am waiting for stable AOSP or CM.
Hello, I wanna ask....
1) What about new version?
2) What languages is in the room?
3) What about move to SD? Can I move apps on card or must I make Ext3 on SD card?
4) Is function front and rear camera?
5) Is possible to use MIUI Theme and cloud?
Thanks
Wincik said:
Hello, I wanna ask....
1) What about new version?
2) What languages is in the room?
3) What about move to SD? Can I move apps on card or must I make Ext3 on SD card?
4) Is function front and rear camera?
5) Is possible to use MIUI Theme and cloud?
Thanks
Click to expand...
Click to collapse
1.The new version means that,the other miui ROM for lenovo a7000 present on xda have version 5.9.2 but this ROM is 5.10.20/GLOBAL/beta.This rom is more stable and smooth.
2.As it is global version it carry many languages.
3.Move to sdcard function not present.
4.rear and front camera works fine
5.yes miui theme centre works.Many themes can be downloaded from theme center
How is the front and back camera wuality?? Is it better than the stock rom??
MIUI V7.0.12.0.LHMMICI Global Stable For Lenovo A7000
Fix brightness and Fix camera storage
https://boycracked.wordpress.com/2016/01/03/custom-rom-miui-v7-0-12-0-lhmmici-global-stable-for-lenovo-a7000/
Lenovo A7000
vishnu_9009 said:
K, even i am waiting for stable AOSP or CM.
Click to expand...
Click to collapse
Me too!
[SIZE=+2]This thread has been created
for
Questions & Answers/Troubleshooting[/SIZE][SIZE=+2]Specific to[/SIZE]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[ROM][GT-N7100][MARSHMALLOW][6.0.1][CyanogenMod 13.0] [UNOFFICIAL]
Please feel free to share issues, questions and offer help
Please keep discussion focused, on the topic described in the OP
2. Post Frequently asked questions
FAQ
Q1: Is this ROM rooted?
Yes, CyanogenMod is rooted by stock, but you must enable root in developer options.Q2: Does this ROM support Agni?
Yes: Agni thread. Don't report bugs, if you installed Agni.Q3: Is the new Gello browser included?
Yes, it's in the ROM.Q4: Do I need to do a clean flash, if I update the ROM?
No, only wipe cache and dalvik-cache.Q5: Is Doze enabled?
Yes, it is.Q6: Will there be a official version of this ROM?
No
Nice :good:
Why I cant disable CM sms messaging app? I'm using Google Messenger. I believe some weeks or months back I was able to disable it (and I still am able to disable Cm browser app, email and other system apps)
Hi,
you should be able to disable it via SDMaid. It can't be disabled via inbuilt manager because CyanogenMod only allowed to freeze some system apps. Messenger can't be freezes.
Thanks for using Q&A!
Hey, users reported there is no Gello in latest build, but how about videos in Chrome?
We know, or I do, that build 28/04 is does not support videos in Chrome. Uhm, not sure if I am supposed to be able to ask this but, @Trafalgar Square will you do any clean buid soon? It may fix the minor bugs we have now. Thanks.
Hi. Can anyone give a small step-by-step instruction set on how to switch to aggressive doze?
Thanks
hello,
I decided to install your ROM on my Note II.
Im coming from 4.4.2 official.
I just rooted and installed latest TWRP,backuped everything with Titanium.
Do I just wipe and install your ROM and GAPPS?
Do I need anything else,like change partition sizes and stuff?
Or do I just shoot?
Thanks in advance!
Promhtheas2000 said:
hello,
I decided to install your ROM on my Note II.
Im coming from 4.4.2 official.
I just rooted and installed latest TWRP,backuped everything with Titanium.
Do I just wipe and install your ROM and GAPPS?
Do I need anything else,like change partition sizes and stuff?
Or do I just shoot?
Thanks in advance!
Click to expand...
Click to collapse
This is exactly what you have to do:
- root your device, use CF-autoroot by Chainfire
- flash TWRP 3.0.2.0 (latest, find it on their website)
- wipe EVERYTHING
To do so go to settings and check rm-rf instead of formating; after that wipe data and type "yes". go to advanced wipe and wipe cache, dalvik, internal, system (everything you see there. USB-otg and micro sd are not required, but i always wipe sd because i have nothing important on it).
- reboot device in recovery and if you want to be 100% sure, wipe again everything with rm-rf ON (reboot again in recovery)
- now you can connect your device to PC and copy the rom zip and gapps zip to your device,(i copy them on sd, it doesn't really matter).
- disconnect your device and flash tge rom zip
- when that's done DONT wipe dalvik/cache
- flash gapps
(make sure you don't flash google camera, it's not working)
- now you CAN wipe dalvik and cache
- reboot into system
Enjoy the best CM 13 ROM.
Now, if you want to tweak your device a little bit more you can install from play store Greenify (in greenify go to settings and enable Aggressive Doze) and L Speed. There is a thread on xda with L Speed. The maintainer explains there what L Speed does and how it works.
I use them and it works better.
@Trafalgar Square did you notice a slower charge with BeansKernel? I get like 1100 mAh..
---------- Post added at 05:24 PM ---------- Previous post was at 05:15 PM ----------
gciochina said:
Hi. Can anyone give a small step-by-step instruction set on how to switch to aggressive doze?
Thanks
Click to expand...
Click to collapse
Install Greenify and go to it's Settings. You will see there Aggressive Doze unenabled, so you have to enable it.
In 9 hours my battery went from 45% to 44%. :good:
Hi Andrew,
Thanks for the reply..I just did a factory reset and installed the ROM and full GAPPS..everything seem to work so far,including Camera.I will test Greenify and L Speed too.
Promhtheas2000 said:
Hi Andrew,
Thanks for the reply..I just did a factory reset and installed the ROM and full GAPPS..everything seem to work so far,including Camera.I will test Greenify and L Speed too.
Click to expand...
Click to collapse
Google Camera? Weird, it doesn't work here
Promhtheas2000 said:
Hi Andrew,
Thanks for the reply..I just did a factory reset and installed the ROM and full GAPPS..everything seem to work so far,including Camera.I will test Greenify and L Speed too.
Click to expand...
Click to collapse
adoptable storage is working?
sd card as internal memory?
huyhung040106 said:
adoptable storage is working?
sd card as internal memory?
Click to expand...
Click to collapse
Not for me. But that might be because of my SD.
Reptilez_DK said:
Not for me. But that might be because of my SD.
Click to expand...
Click to collapse
That just doesn't work, it's not only you.
huyhung040106 said:
adoptable storage is working?
sd card as internal memory?
Click to expand...
Click to collapse
No, it will never work.
Hey, I have a problem with WhatsApp, when I restore the backup, it failed
roy_29_11 said:
Hey, I have a problem with WhatsApp, when I restore the backup, it failed
Click to expand...
Click to collapse
Please give proper permissions for WhatsApp.
Thanks for using Q&A!
With file manager?
No, in settings.
Under Apps.
Hey i have a problem after flashing cm13 i stuck in bootloop i need help
I want to know any compatible custom recovery for Xperia 10 III. I tried installing TWRP but that ended up bricking my phone.
I don't know if it helps but it is an XQ-BT52.
TrulyPain said:
I want to know any compatible custom recovery for Xperia 10 III. I tried installing TWRP but that ended up bricking my phone.
I don't know if it helps but it is an XQ-BT52.
Click to expand...
Click to collapse
no any custom recovery available for your devices
ada12 said:
no any custom recovery available for your devices
Click to expand...
Click to collapse
Okay, would you expect any custom recovery being released soon or is my best hope to create an myself?
TrulyPain said:
Okay, would you expect any custom recovery being released soon or is my best hope to create an myself?
Click to expand...
Click to collapse
Best solution is compile yourself ...
3day ago I have used twrp trees generator from stock recovery.img
Here sources https://github.com/Aarqw12/twrp_lena
But I no compile succefully for now I'm really no experimented for twrp stuff...
or I will try compile stock recovery witch signature verificstion disabled for allow all zip flash
TrulyPain said:
Okay, would you expect any custom recovery being released soon or is my best hope to create an myself?
Click to expand...
Click to collapse
good news I booted just now twrp compiled
I need fix some issue before open thread
bug no fixed : internal storage decryption ( mtp too so )
work : booting , touchscreen , fastbootd, external storage / usb otg , backup , access to partition system,vendor ...
I hope in 1-2 day its stable
ada12 said:
bug no fixed : internal storage decryption ( mtp too so )
work : booting , touchscreen , fastbootd, external storage / usb otg , backup , access to partition system,vendor ...
I hope in 1-2 day its stable
Click to expand...
Click to collapse
It is sufficient for custom roms
I have a small request. Can you send me system and vendor partitions? Or at least tell me how to get it.
In LG, I could use qfil for this. In Sony I can't do that anymore
In adb I don't see vendor and system
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kyrimeas said:
It is sufficient for custom roms
I have a small request. Can you send me system and vendor partitions? Or at least tell me how to get it.
In LG, I could use qfil for this. In Sony I can't do that anymore
In adb I don't see vendor and system
View attachment 5469595
Click to expand...
Click to collapse
Its fstab I extracted from /vendor/etc , its give you response how is mounted
For encryption, you can just decrypt it after installing twrp. Then you'll be able to see your sdcard no problem.
[Deprecated] Universal DM-Verity, ForceEncrypt, Disk Quota Disabler [11/2/2020]
Hi all! For the past couple of months, I've been looking into making a more universal solution to disable dm-verity and forceencrypt. Needing to take different zips, modify them for different devices, and then cross your fingers when you switch...
forum.xda-developers.com
ada12 said:
bug no fixed : internal storage decryption ( mtp too so )
work : booting , touchscreen , fastbootd, external storage / usb otg , backup , access to partition system,vendor ...
I hope in 1-2 day its stable
Click to expand...
Click to collapse
Got any updates on how it's going?
TrulyPain said:
Got any updates on how it's going?
Click to expand...
Click to collapse
No, when I add qcom encryption & blobs recovery no boot...
Without encryption stuff its boot but I get 0mb internal storage
Has there been any progress on the matter yet?
It would be really great if we have the ability to flash unsigned zip files.
@ada12 can you provide me your TWRP build?
I would love to test it.
Even without working decryption it would be a huge added value
@psychofaktory what are you trying to accomplish with the recovery? There's a Magisk module (Backup, by Draco) which gives you a command line tool that dumps partition images, and you can flash them with fastboot. I've dumped the boot partition and compared the checksum with the one I flashed (the one patched by Magisk) and they're identical.
There's also a stock recovery that's very limited but allows you to do factory reset.
It would give the ability to flash unsigned zip files.
This guy has a twrp tree for 10 III. Maybe it can be built and used. Optionally, we can modify the tree from 10 II.
https://github.com/pintaf/android_device_sony_lena_twrp
psychofaktory said:
Has there been any progress on the matter yet?
It would be really great if we have the ability to flash unsigned zip files.
@ada12 can you provide me your TWRP build?
I would love to test it.
Even without working decryption it would be a huge added value
Click to expand...
Click to collapse
I have no shared in public any build because its unusable for user , twrp boot but impossible to mount internal storage , we simply cant flash gapps zip and more ... I need help from pro twrp dev for encryption but seem nobody care for this devices.
they are no sources twrp usable for lena
Would it work to disable the encryption temporarily so that the internal memory of TWRP does not have to be decrypted at all?
It would be really awesome if more developers would show interest in the device.
It's a really great device with a lot of potential.
Can anyone provide TWRP for Xperia 10 III?
ada12 said:
I have no shared in public any build because its unusable for user , twrp boot but impossible to mount internal storage , we simply cant flash gapps zip and more ... I need help from pro twrp dev for encryption but seem nobody care for this devices.
they are no sources twrp usable for lena
Click to expand...
Click to collapse
What kernel are you using?
Maybe some dev from another Xperia could help you.
@modpunk @Sjll
Kyrimeas said:
What kernel are you using?
Maybe some dev from another Xperia could help you.
@modpunk @Sjll
Click to expand...
Click to collapse
I found the solution, flash litegapps systemless as magisk module https://sourceforge.net/projects/li...MAGISK]LiteGapps++_v2.3_official.zip/download