Develop Bugs

Stuck on TWRP logo

Hello, my problem here is whenever I wanted to boot to recovery, it got stuck at the TWRP logo and cannot enter the recovery. Can anybody help? I already tried to flash it manually with the latest image and it still brings the same problem.

zakiamani97 said:
Hello, my problem here is whenever I wanted to boot to recovery, it got stuck at the TWRP logo and cannot enter the recovery. Can anybody help? I already tried to flash it manually with the latest image and it still brings the same problem.
Click to expand...
Click to collapse
Did you follow the instructions to flash TWRP step-by-step?
*(Before starting, rename your TWRP image to twrp-recovery.img for convenience)
*This step is optional
Put your device into fastboot
Connect it to your PC
Open an adb command window
fastboot devices
fastboot oem unlock
fastboot flash recovery twrp-recovery.img
Then once it's done, you can disconnect your device and turn it off.
Once it's off, you can boot into recovery mode, and you should be able to access the recovery menu.
Cheers!

Calvin_K said:
Did you follow the instructions to flash TWRP step-by-step?
*(Before starting, rename your TWRP image to twrp-recovery.img for convenience)
*This step is optional
Put your device into fastboot
Connect it to your PC
Open an adb command window
fastboot devices
fastboot oem unlock
fastboot flash recovery twrp-recovery.img
Then once it's done, you can disconnect your device and turn it off.
Once it's off, you can boot into recovery mode, and you should be able to access the recovery menu.
Cheers!
Click to expand...
Click to collapse
Flash Philz,
Then TWRP

NEED HELP !!! OPPO FIND 7 stuck on boot with logo only

Tried fixing my oppo find 7
Did all those Fastboot wipe .
Fastboot flash recovery and flash LOGO and stuffs
but im still stuck on logo ... WHUT

kevzwenhao said:
Tried fixing my oppo find 7
Did all those Fastboot wipe .
Fastboot flash recovery and flash LOGO and stuffs
but im still stuck on logo ... WHUT
Click to expand...
Click to collapse
Did you unlock bootloader?
1. Connect the device to the computer through USB.
2. From a terminal on a computer, type the following to boot the device into fastboot mode (or restart pressing power+vol up):
Code:
adb reboot bootloader
3. Once the device is in fastboot mode, verify your PC sees the device by typing:
Code:
fastboot devices
4. From the same terminal, type the following command to unlock the bootloader:
Code:
fastboot oem unlock
If the device doesn't automatically reboot, reboot it from the menu. It should now be unlocked.
5. Then you can flash the recovery what you want. In fastboot mode, type in terminal:
Code:
fastboot devices
6. And flash the recovery. Type:
Code:
fastboot flash recovery your_recovery_image.img
Good luck

roi_xordo said:
Did you unlock bootloader?
1. Connect the device to the computer through USB.
2. From a terminal on a computer, type the following to boot the device into fastboot mode (or restart pressing power+vol up):
Code:
adb reboot bootloader
3. Once the device is in fastboot mode, verify your PC sees the device by typing:
Code:
fastboot devices
4. From the same terminal, type the following command to unlock the bootloader:
Code:
fastboot oem unlock
If the device doesn't automatically reboot, reboot it from the menu. It should now be unlocked.
5. Then you can flash the recovery what you want. In fastboot mode, type in terminal:
Code:
fastboot devices
6. And flash the recovery. Type:
Code:
fastboot flash recovery your_recovery_image.img
Good luck
Click to expand...
Click to collapse
Hi, is it wrong to wipe the system partition before flashing a custom rom? Coming from stock ColorOS, I've wiped all dalvik cache, cache, system, and data, then flash a custom rom but it ended up getting endless bootanimation unable to boot into the custom rom.
I did unlock the bootloader with the adb code, flashing a temporary recovery was a success but endless bootanimation happened after flashing a custom rom. The custom rom was successfully installed according to TWRP's log.
Pls advice, thanks in advanced
P.s: I was referring to my friend's device X9076

Hi, i tried in the past some roms than not works, phone stuck in boot animation. The roms wich works for me and my x9076 with r63419 are:
Omnirom (6 or 5) THE BEST
Project Spectrum
Cyanogen 13 (modified version for new panel: http://community.oppo.com/en/forum.php?mod=viewthread&tid=44907&extra=)
Miui
If you install CM13, you need to flash unified partition script for CM13 (you can find it in the same post from the forum Oppo Community)
For the other roms i dont need to flash anything else than rom and gapps.
Now i give a chance to CM13, but i think that i will get back to Omni if developers dont fix the mobile radio issue.
Cheers

Can anyone guide me please, 1st time i bought MTK phone Oppo F7, its update automatically but suddenly dead like stuck on logo and restarting again and again, i didnt ever flash MTK phone, neither i have any android tool like MRT dongle or any other flash USB or Box... Kindly guide me step by step how to flash with which tool only USB cable and PC... Thanks in advance

Need help! Bootloader / fastboot unknown issue!

Hi everyone,
I´ve been trying to install twrp recovery in my Huawei Ascend P6 via fastboot. I followed this "techglen adb and fastboot guide"
I already installed everything needed for adb conection.
So I connect my phone in MTP mode and use "adb devices" and my device appears normally, but the problem happens when I reboot into Bootloader/Fastboot mode and use "Fastboot devices" it appears a device conected but with a bunch of "?????" and a smiley face at the end like this:
C:\Fastboot>adb devices
List of devices attached
123456789 device --------> bunch of numbers appear normally
C:\Fastboot>adb reboot bootloader --------> Phone restarts into bootloader mode (shows huawei ascend logo)
C:\Fastboot>fastboot devices
????????_?_???_?<??????? fastboot ----------> WTF (this is exactly what appears)
I would like to know if there's something wrong with my phone
Should I proceed and flash the custom recovery?
I have stock android 4.4.2 (rooted with kingroot) and stock recovery.
I am a total noob at this so I need your help :crying: I dont want to do anything stupid. (If already did let me know lol)

I have the same issue. Problem is that phone is bricked, so I can only enter in recovery (official, unrooted, unlocked) and fastboot mode.
Have you managed to solve or have some hint?

I have experienced a inconsistency while using minimal adb and fastboot. While device not showing i could send command and the phone would respond. After going into bootloader and while my device wasn't shown in the list i could flash twrp without much trouble, helped me go back from being stuck on bootanimation. used the command fastboot flash recovery xxxx.img (where xxx is the name recovery name). If you can get into boot loader try fastboot reboot bootloader and if the phone responds you might be in the same situation i was.
Always remember: Messing with recoveries bootloaders and boot images might make your phone unusable so do it at your own risk

Have you actually tried to flash twrp? Did you put the img file of twrp to the minimal adb and fastboot folder? If so, try the commands 'fastboot flash recovery recovery_twrp.img(<-- use the name of twrp file here, so not the exact name wrote here) and reboot. My phone is a bunch of question marks as well and it flashed twrp just perfectly (I got it frome here: http://forum.xda-developers.com/showthread.php?t=2632542)

No ROM, No Recovery, No Fastboot or HBOOT ! Help Please

So basically what happened is that i flash a bad rom on my htc a5dwg. I could boot into TWRP 2.8.7.0 and flashed roms through ADB sideload but all gave me some error and were not flashing. So i flashed TWRP 3.1.1 img. Now i cant Access recovery, nor power and vol down button take me to HBOOT or Fastboot mode. Cant reboot to rom. Stuck at boot screen with HTC logo and the unlocked bootloader warning. I connected my phone to laptop and it does show up in device manager as MTP USB device but i cant use fastboot or ADB commands as it does not show up in the Fastboot ADB device options, Some help would be highly appreciated.

i am having the same problem have you found any way out yet?

No OS is installed. Moreover recovery cannot be accessed. Nor can flash it via adb.

Previously I was using Ressurection Remix treble rom which is based on android 9 pie. I went to TWRP and wiped the OS. Then I tried to install a new rom called Dot OS. But it showed error 7. So I flashed Vendortofactory zip within twrp and without rebooting again into TWRP I flashed a new TWRP image within TWRP by selecting Recovery mode. After that I cant boot into TWRP and as already my OS is gone I also cannot boot into any system. Moreover my device is not getting detected in my PC. I cannot install TWRP by writing commands in cmd, while the phone is in fastboot mode as the device is not getting detected in my pc. Really it is urgent. I will be glad if someone helps me. Thanks in advance.

What is the present booted state of your device? Are you in twrp, or bootloader. Most of the time you can keep on pressing the power button. When it boots into a message about unlocked bootloader, press volume button to select recovery and it will boot into twrp

You should be able to boot in fastboot mode without recovery nor os, maybe your drivers are not working on windows? Try different usb ports, check if the display says "bootloader" or something. If nothing works try the usb shunt, this device is literally 'unbrickable' if it's working properly.

Watch this video(https://www.youtube.com/watch?v=DexLELi04XY) and then you will be able to detect your phone in your pc in qcom 9008 mode , then use qfil to flash ZUI firmware ,there are plenty of tutorials on the internet for that ,then follow the proper procedure mentioned in DotOs thread for flashing the new rom .
Hope it helped .

If you don't want to flash the firmware and all long process just follow the following steps
Enter in to the boot loader make sure you installed all the drivers in to pc then open cmd windows in adb fastboot folder and enters the following cmd into the cmd
Fastboot -i 0x2b4c devices this will detect your device
After that enter
Fastboot -i0x2b4c flash recovery recovery name.img
And boom you are good to go flash the rom of your choice and enjoy
For this process you need following files
Adb and fastboot devices
Drivers of zuk z2
Latest recovery and place revovery image file into the adb and fastboot folder if you are confused about anything pm me i am not the expert but i faced simillar problem and solved by this method

yashpatel1221 said:
If you don't want to flash the firmware and all long process just follow the following steps
Enter in to the boot loader make sure you installed all the drivers in to pc then open cmd windows in adb fastboot folder and enters the following cmd into the cmd
Fastboot -i 0x2b4c devices this will detect your device
After that enter
Fastboot -i0x2b4c flash recovery recovery name.img
And boom you are good to go flash the rom of your choice and enjoy
For this process you need following files
Adb and fastboot devices
Drivers of zuk z2
Latest recovery and place revovery image file into the adb and fastboot folder if you are confused about anything pm me i am not the expert but i faced simillar problem and solved by this method
Click to expand...
Click to collapse
This assumes u have upgraded bootloader to 4.4 kernal.
U can still boot into twrp.. When the phone is booting up press vol up key and select recovery.. From there boot into twrp. There select f2v or v2f .. Then flash twrp which u want to flash.. Reboot to recovery.. U will get promp no os installed.. Ignore and reboot to recovery . Then again d9 f2v or v2f depending on what rom to install.. Again reboot to recovery... Then flash rom of ur choice.
This procedure is needed when changing from vendor to factory and vice versa.

sanjay.2704 said:
This assumes u have upgraded bootloader to 4.4 kernal.
U can still boot into twrp.. When the phone is booting up press vol up key and select recovery.. From there boot into twrp. There select f2v or v2f .. Then flash twrp which u want to flash.. Reboot to recovery.. U will get promp no os installed.. Ignore and reboot to recovery . Then again d9 f2v or v2f depending on what rom to install.. Again reboot to recovery... Then flash rom of ur choice.
This procedure is needed when changing from vendor to factory and vice versa.
Click to expand...
Click to collapse
I don't understand what you are talking about as i say i am not some kind of technical expert i am here help regarding this i faced similar situation where i am not able to enter into recovery and also not able to enter into the os and when i restart the phone it automatically boot into fast boot mode what ever option i select and i solved my problem by this method