Hi there, A friend at work has given me his M8 which appears to be stuck in recovery mde t see if i can get it back to working or can do anything with it.
I have samsung phones myself and while i know how to flash a stck rom etc to these, reading on some of the threads here it seems alot more complicated process on the HTC....
I have not had any experiencewith HTC devices since the HD2 days (what a great phone) so really need someone to walk me through what software/firmware i need and where to find it and what to do with it?
At the moment, it turns on, then goes into the recovery menu, then I choose wipe data/cache, and restore factory etc, but it then just comes up with done, choose the reboot option to come back to the recovery mode again........
I think it is a stock uk/eu release of the M8, don't know what network it was on or whether it was rooted/unlocked before hand.
Any help would be greatly appreciated!!!
In the recovery menu I believe there is reboot to bootloader option. Select that, then tell us what's written on the bootloader
Search on how to do fastboot getvar all then post the result without serial & imei no.
Then we'll see anything we can offer to help
ckpv5 said:
In the recovery menu I believe there is reboot to bootloader option. Select that, then tell us what's written on the bootloader
Search on how to do fastboot getvar all then post the result without serial & imei no.
Then we'll see anything we can offer to help
Click to expand...
Click to collapse
hi there, i tried it in the bootloader menu amd this pic is what comes up
the other info in post below
Found the drivers etc now and managed to get the info which is as :
c:\adbfast>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 3.19.0.0000
INFOversion-baseband: 1.29.214500021.12G
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 6.12.401.4
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: xxxxxxxxxxxxx
INFOimei: xxxxxxxxxxxxxx
INFOimei2: Not Support
INFOmeid: 00000000000000
INFOproduct: m8_ul
INFOplatform: hTCBmsm8974
INFOmodelid: 0P6B10000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 0mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 76df2b54
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.020
You can install RUU to fix it ...
read this : http://forum.xda-developers.com/showpost.php?p=64926362&postcount=4 for the driver part
and this : http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6 for the RUU part on how-to
ckpv5 said:
You can install RUU to fix it ...
read this : http://forum.xda-developers.com/showpost.php?p=64926362&postcount=4 for the driver part
and this : http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6 for the RUU part on how-to
Click to expand...
Click to collapse
Thanks alot forall your help, all done and strting up!!!:highfive::good:
Related
Hi,
My HTC Desire HD is currently stuck at the operator logo screen. I've tried removing rebooting battery going into boot-loader, resetting factory settings but still no luck.
Also as there is no way for me to boot into the phone to turn on USB debugging to re flash what can I do.
I've tried fastboot via boot loader it doesn't recongise the device on the pc (as I believe USB debugging not enabled)
please help
mulkman said:
Hi,
My HTC Desire HD is currently stuck at the operator logo screen. I've tried removing rebooting battery going into boot-loader, resetting factory settings but still no luck.
Also as there is no way for me to boot into the phone to turn on USB debugging to re flash what can I do.
I've tried fastboot via boot loader it doesn't recongise the device on the pc (as I believe USB debugging not enabled)
please help
Click to expand...
Click to collapse
How did you end up like this? adb works only with a fully booted rom and not in hboot. Factory reset deletes the usb debugging drivers, so you wont be able to use it now. You can use fastboot command to flash in fastboot usb.
Are you able to boot in hboot? and are you S-OFF? then try flashing a ruu from fastboot. Use the guide in my signature to help yourself...if you need further help, just let me know.
glevitan said:
How did you end up like this? adb works only with a fully booted rom and not in hboot. Factory reset deletes the usb debugging drivers, so you wont be able to use it now. You can use fastboot command to flash in fastboot usb.
Are you able to boot in hboot? and are you S-OFF? then try flashing a ruu from fastboot. Use the guide in my signature to help yourself...if you need further help, just let me know.
Click to expand...
Click to collapse
Yes can boot into Hboot, Yes I have unlocked my device via HTCdev.
I have tried installing custom roms but they all fail and I believe this is due to me not having root.
I have also tried the t-mobile stock RUU that has failed aswell from fastboot
Here are my details:
C:\mini-adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.110.4
INFOserialno: HT0CGRXXXXX
INFOimei: 3562990414XXXX
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: T-MOB005
INFObattery-status: good
INFObattery-voltage: 3923mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
mulkman said:
Yes can boot into Hboot, Yes I have unlocked my device via HTCdev.
I have tried installing custom roms but they all fail and I believe this is due to me not having root.
I have also tried the t-mobile stock RUU that has failed aswell from fastboot
Here are my details:
C:\mini-adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.110.4
INFOserialno: HT0CGRXXXXX
INFOimei: 3562990414XXXX
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: T-MOB005
INFObattery-status: good
INFObattery-voltage: 3923mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
Click to expand...
Click to collapse
Have you flashed the boot.img in fastboot? That is the way to flash a custom rom with an unlock bootloader....check the guide in my signature to help yourself. If you need further help, just let me know.
glevitan said:
Have you flashed the boot.img in fastboot? That is the way to flash a custom rom with an unlock bootloader....check the guide in my signature to help yourself. If you need further help, just let me know.
Click to expand...
Click to collapse
Thanks I just read that from your user guide Amazing and it worked a treat!!.
Appreciate all your help, and truly hope this thread helps someone else
My HTC One X (Endeavour, UK version - stock, as far as I'm aware) refuses to update OTA. It's currently claiming to be on 4.0.3 but checking for updates claims nothing is available when there should be plenty of updates since this. I've tried both through Three and GiffGaff to rule out a crappy provider not having the updates.
Does anyone know why this is happening? And if something odd may be interfering, what it may be and how to revert it?
It's driving me mad.
Thanks.
Enverex said:
My HTC One X (Endeavour, UK version - stock, as far as I'm aware) refuses to update OTA. It's currently claiming to be on 4.0.3 but checking for updates claims nothing is available when there should be plenty of updates since this. I've tried both through Three and GiffGaff to rule out a crappy provider not having the updates.
Does anyone know why this is happening? And if something odd may be interfering, what it may be and how to revert it?
It's driving me mad.
Thanks.
Click to expand...
Click to collapse
post the results of "fastboot getvar all" but remove the imei and serial number.
Done
Code:
INFOversion: 0.5a
INFOversion-bootloader: 0.95.0000
INFOversion-baseband: 2.1204.127.19
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.29.401.12
INFOserialno: REMOVED
INFOimei: REMOVED
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: None
INFObattery-status: good
INFObattery-voltage: 3962mV
INFOdevpower: 76
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.822s
Enverex said:
Done
Code:
INFOversion: 0.5a
INFOversion-bootloader: 0.95.0000
INFOversion-baseband: 2.1204.127.19
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.29.401.12
INFOserialno: REMOVED
INFOimei: REMOVED
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: None
INFObattery-status: good
INFObattery-voltage: 3962mV
INFOdevpower: 76
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.822s
Click to expand...
Click to collapse
it's not showing your cid, go on play store and get the app called "cid getter" then tell me what your cid is, or do you already know?
1.29.401. It's unbranded wwe. Use ruu's .....2.17.401 and 3.14.401 are available
Mr Hofs said:
1.29.401. It's unbranded wwe. Use ruu's .....2.17.401 and 3.14.401 are available
Click to expand...
Click to collapse
@Enverex there you go, get one of the ruu's @Mr Hofs has just mentioned from here>>>>>http://www.androidruu.com/?developer=Endeavor
Thanks. I downloaded that app and apparently the CID is HTC__001.
Unbranded
Christ this is tedious.
First I had error 170 USB Connection error. Managed to resolve that.
Then 171 USB Connection error. Got around that.
Now I'm on 132 Signarure (yes, not signature) error.
It's mandatory to install the 2.17.401 ruu first with a relocked bootloader. The 3.14 ruu won't work now beecause you come from a to low hboot
Mr Hofs said:
It's mandatory to install the 2.17.401 ruu first with a relocked bootloader. The 3.14 ruu won't work now beecause you come from a to low hboot
Click to expand...
Click to collapse
Ahh ok, that makes sense. And these recaptchas are making me want to stab myself in the face...
Enverex said:
Ahh ok, that makes sense. And these recaptchas are making me want to stab myself in the face...
Click to expand...
Click to collapse
2.17 on that website is corrupted, it's only ~80MB. Had to download it from elsewhere.
Cool. Got a link for me ?
Mr Hofs said:
Cool. Got a link for me ?
Click to expand...
Click to collapse
I can't post links, I don't have enough posts apparently. It was named "RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed".
I downloaded "RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed" from another site and that went through successfully, but I've just tried "RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed" again and I'm still getting a signature error. Any ideas?
Boot up the phone and check for official ota's ! That might work
Hey
I have looking for a good rom for my HTC desire a8181 but no one of them will work with my 3g or high speed internet. Now i have install rom there sure not fit to my phone and now it will not startup, only stock with HTC logo.
My recovery is also not work.
The only thing there seems to work fine is Hboot and Bootloader.
I have never been out for that before and i have looking at the internet to find something there can fix it but have not been locky.
I had installe Revolutionnary but i cant install that again...
My phone is root and s-off...
My cid is TDC in denmark
Here is some info about the phone:
c:\mini-adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 6.93.1002
INFOversion-baseband: 4.05.00.11
INFOversion-cpld: None
INFOversion-microp: 031d
INFOversion-main: 1.15.405.1
INFOserialno: HT06JPL06586
INFOimei: 357841038693475
INFOproduct: bravo
INFOplatform: HBOOT-8x50
INFOmodelid: PB9920000
INFOcidnum: HTC__Y13
INFObattery-status: good
INFObattery-voltage: 4148mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-365c78d6
INFOhbootpreupdate: 11
all: Done!
finished. total time: 0.016s
i really hope someone have something there can fix it...
Since youve got S-OFF this hopefully shouldnt be too hard to fix. Follow the instructions here to flash 4ext recovery using a PB99IMG. Then go into recovery, full wipe, and flash a rom.
Thanks.... any other idea about a rom
Chromium_ said:
Since youve got S-OFF this hopefully shouldnt be too hard to fix. Follow the instructions here to flash 4ext recovery using a PB99IMG. Then go into recovery, full wipe, and flash a rom.
Click to expand...
Click to collapse
Thanks a lot.... i works and recovery is working again... i am happy i got fix the s-off
Do you know anythings about what rom there will work for my phone.... everythings work in those rom i have try but not the internet (3g/4g)...only the wireless internet....
Hi all.
i apologise if something similar has been posted, I can see nothing that matches my situation thus far.
I used to have a DHD which was S-OFF, sim unlocked, rooted and so on which I passed on to a relative when I upgraded, and went with samsung suff for a while.
Now I'm back on a Desire HD I bought from eBay, which works fine, its unlocked, and so on.
But I want to go to an older revision of android, or a custom one for performance reasons, because as it stands, the stock rom on it is useless.
I have CWM Touch recovery installed, and I have an unlocked bootloader, but no matter what I try I cannot S-OFF the phone.
I have tried installing custom roms which go nowhere, because from what I can gather, S-ON wont let it boot.
The phone was originally locked to Orange, and is branded with thier logo etc.
Android 2.3.5
Sense 3.0
Software Number 2.13.61.5
HBOOT-2.00.0029
RADIO-26.14.04.28_M
Is it possibe to S-OFF this phone or am I stuck with it this way?
I've tried ACE Hack Tools, but it didnt really get very far. I tells me to download PD98IMG-GB2 which I did (once I managed to find it) and tried to flash it, which also went nowhere. Nothing works, that I know of at the minute anyway.
Anyone know anything else to try or what I'm missing?
Thanks.
U need to connect device to PC and issue a cmd prompt "adb reboot bootloader". Then in bootloader ,type fastboot getvar all..and post its results
WE need these details so we can properly assist you.
If you want to S-OFF your device you should read this guide very carefully.
In the first step it's telling you to take a backup your kernel (boot.img) using dd command from root shell if you want to make the current rom working again after the s-off process.You could also make a nandroid backup from your recovery instead.
Then you have to make a goldcard in order to flash an RUU without a signature verification.If you want to downgrade your firmware you should downgrade your misc version to a lower value from the version of the RUU you are going to use to downgrade.You have also to flash an unsecured kernel (for example the boot.img that's included in ace-tools folder) and the revolutionary recovery (included in ace tools) in order to make the process correctly.
After that you can flash the firmware.zip cooperative with the radio exploit to be able to s-off your device with g-free.(In order to be able to flash the zip you have to relock your bootloader)
After this process has been made correctly you should be able to see S-OFF in your bootloader and you can restore kernel and recovery or a nandroid backup to make your device working again.You can also use an RUU.But definitly you have to upgrade your firmware after the process.
* You don't have to upgrade hboot as long as you have HBOOT-2.00.0029 *
---------- Post added at 11:17 PM ---------- Previous post was at 10:18 PM ----------
If you want to upgrade your radio (and ril) after the S-OFF process check this link.
marknoll said:
U need to connect device to PC and issue a cmd prompt "adb reboot bootloader". Then in bootloader ,type fastboot getvar all..and post its results
WE need these details so we can properly assist you.
Click to expand...
Click to collapse
getvar results:
version: 0.5
version-bootloader: 2.00.0029
version-baseband: 26.14.04.28_M
version-cpld: None
version-microp: 0438
version-main: 3.13.61.5
serialno: SH13FRX06168
imei: 356812049608498
product: ace
platform: HBOOT-7230
modelid: PD9810000
cidnum: ORANG001
battery-status: good
battery-voltage: 3911mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: fcef1579
hbootpreupdate: 11
gencheckpt: 0
region-id: 0
Gatosbil said:
If you want to S-OFF your device you should read this guide very carefully.
In the first step it's telling you to take a backup your kernel (boot.img) using dd command from root shell if you want to make the current rom working again after the s-off process.You could also make a nandroid backup from your recovery instead.
Then you have to make a goldcard in order to flash an RUU without a signature verification.If you want to downgrade your firmware you should downgrade your misc version to a lower value from the version of the RUU you are going to use to downgrade.You have also to flash an unsecured kernel (for example the boot.img that's included in ace-tools folder) and the revolutionary recovery (included in ace tools) in order to make the process correctly.
After that you can flash the firmware.zip cooperative with the radio exploit to be able to s-off your device with g-free.(In order to be able to flash the zip you have to relock your bootloader)
After this process has been made correctly you should be able to see S-OFF in your bootloader and you can restore kernel and recovery or a nandroid backup to make your device working again.You can also use an RUU.But definitly you have to upgrade your firmware after the process.
* You don't have to upgrade hboot as long as you have HBOOT-2.00.0029 *
---------- Post added at 11:17 PM ---------- Previous post was at 10:18 PM ----------
If you want to upgrade your radio (and ril) after the S-OFF process check this link.
Click to expand...
Click to collapse
My Device info is
version: 0.5
version-bootloader: 2.00.0027
version-baseband: 26.14.04.28_M
version-cpld: None
version-microp: 0438
version-main: 3.13.707.4
serialno:
imei:
product: ace
platform: HBOOT-7230
modelid: PD9810000
cidnum: HTC__044
battery-status: good
battery-voltage: 4191mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 743ca94a
hbootpreupdate: 11
gencheckpt: 0
region-id: 0
I want to S-Off. I am novice user.
I read your post. WHAT is DD Command from which I can make boot.img. Please guide me how to make boot.img
Then how to S-Off my device.
WHAT IS GOLD CARD? How to make it.
Please guide every step.
Thanks
aurawater said:
My Device info is
version: 0.5
version-bootloader: 2.00.0027
version-baseband: 26.14.04.28_M
version-cpld: None
version-microp: 0438
version-main: 3.13.707.4
serialno:
imei:
product: ace
platform: HBOOT-7230
modelid: PD9810000
cidnum: HTC__044
battery-status: good
battery-voltage: 4191mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 743ca94a
hbootpreupdate: 11
gencheckpt: 0
region-id: 0
I want to S-Off. I am novice user.
I read your post. WHAT is DD Command from which I can make boot.img. Please guide me how to make boot.img
Then how to S-Off my device.
WHAT IS GOLD CARD? How to make it.
Please guide every step.
Thanks
Click to expand...
Click to collapse
At first you have not to make a boot.img.
Secondly with dd command you can copy a hole disk or partitions either sectors in raw mode.The only think that the S-OFF guide describes you do with it is to backup your original kernel by backing up your hole boot partition in order to make you rom working again (after the S-OFF proccess).
The guide for S-OFF I gave you describes exactly how to make a goldcard using a root shell.You have not to do something special but to follow this guide.
A little more specificly:
Code:
adb shell cat /sys/class/mmc_host/mmc2/mmc2:*/cid
This command gives you the goldcard number of your phone.
Code:
adb shell /data/local/tmp/goldcard -c {sd card cid above} -o /data/local /tmp/goldcard.img
This command creates a goldcard token with your goldcard number.
Code:
adb shell dd if=/data/local/tmp/goldcard.img of=/dev/block/mmcblk1
And this command writes the goldcard.img (token) we created on your sdcard in raw mode.(By making your sdcard gold you could flash anything.It could also break your device if you don't know what are you flashing)
means I should stay away, as I AM novice user. If any thing goes wrong i will be in deep trouble.
aurawater said:
means I should stay away, as I AM novice user. If any thing goes wrong i will be in deep trouble.
Click to expand...
Click to collapse
I just explaned you what you are going to do with those proccesses like you asked me.If you don't understand or you don't feel free to make the proccess you shouldn't try it at all.As long as you follow the right instractions and you apply them correctly you have nothing to be afraid.(You have to remember that any time something could go wrong even if it is not your fault like some power failure).
But personally I think the only risky part is to make the proccess of radio downgrade right.After that it should be a piece of cake to make the S-OFF trick.
Aahk 2. Here on xda
Yes, the AAHK2 does not work for me, hence starting this thread. However, I solved my issue. The trick to it is not S-OFF at all, it merely requires an unlocked bootloader. Is probably slightly more hassle than S-OFF, but I don't care, it works. All you need to do is extract the "boot.img" from the ROM you want. Place it in your ADB folder.
Install the ROM via recovery and then reboot to the bootloader (you can do this via adb but for my sakes I removed the battery and used vol- & power to boot into it.
Then you flash the boot.img using "fastboot flash boot boot.img" and then "fastboot reboot" and it should work fine, I managed to load up cyanogen mod not a problem this way. Whereas before, installing a rom would not work whatsoever.
aurawater said:
My Device info is
version: 0.5
version-bootloader: 2.00.0027
version-baseband: 26.14.04.28_M
version-cpld: None
version-microp: 0438
version-main: 3.13.707.4
serialno:
imei:
product: ace
platform: HBOOT-7230
modelid: PD9810000
cidnum: HTC__044
battery-status: good
battery-voltage: 4191mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 743ca94a
hbootpreupdate: 11
gencheckpt: 0
region-id: 0
I want to S-Off. I am novice user.
I read your post. WHAT is DD Command from which I can make boot.img. Please guide me how to make boot.img
Then how to S-Off my device.
WHAT IS GOLD CARD? How to make it.
Please guide every step.
Thanks
Click to expand...
Click to collapse
You don't need to S-OFF if all you want to do is flash a custom ROM. You do need an unlocked bootloader, and a recovery installed.
Assuming both of those are the case, do the following: On your computer, download the custom rom you want and and open it (it should be a .zip file) in any file archive utility and find its "boot.img" and extract it. If you can't find it manually, search for it, winrar allows you to do this. Place it in the same folder as your adb and fastboot tools for instance mine is C:\adb
Copy the custom ROM.zip file to your phones SD card, and install it normally via the recovery. Once this is done, reboot the device into the bootloader. I do this by just taking the battery out quickly and putting it back in, and then holding Vol Down & Power. when the boot loader shows, highlight the "fastboot" option and press the power button, then connect it to your computer via usb. Then on your computer, (i assume windows), press the windows flag key and the R at the same time, this brings up the Run prompt. Type CMD in it to open the command promt. then navigate to yoru adb folder using the "CD" command, for example:
CD C:\adb
once you have done that, type the following:
fastboot flash boot boot.img
(remember I said to place the boot.img in the same folder as your fastboot/adb tools)
It should push the boot.img that you extracted earlier to the phone, its usually very quick. Once you've done this, type:
fastboot reboot
and then unplug your usb cable. The phone will take a while to start up, but it will work, regardless of S-ON or S-OFF. My phone is S-ON and I can flash ROM's using this method.
silegeek said:
You don't need to S-OFF if all you want to do is flash a custom ROM. You do need an unlocked bootloader, and a recovery installed.
Assuming both of those are the case, do the following: On your computer, download the custom rom you want and and open it (it should be a .zip file) in any file archive utility and find its "boot.img" and extract it. If you can't find it manually, search for it, winrar allows you to do this. Place it in the same folder as your adb and fastboot tools for instance mine is C:\adb
......
fastboot reboot
and then unplug your usb cable. The phone will take a while to start up, but it will work, regardless of S-ON or S-OFF. My phone is S-ON and I can flash ROM's using this method.
Click to expand...
Click to collapse
Thanks for This Great Help
I decided to give it a try, did all as you said but when I went to recovery mode there is nothing but Red Triangle and Disk Image.
Now what to do?
aurawater said:
Thanks for This Great Help
I decided to give it a try, did all as you said but when I went to recovery mode there is nothing but Red Triangle and Disk Image.
Now what to do?
Click to expand...
Click to collapse
it sounds like you need to flash a recovery first of all. I have attached a recovery image you can use, its is TWRP; you need to flash this via the bootloader. copy the recovery.img to the same place as your adb folder, take the battery out of your phone and put it back in and hold Vol Down & Power, and then highlight the fastboot option and connect it to your computer. Then using CMD (Windows flag & R) go to your adb folder (cd:\adb) and type:
fastboot flash recovery recovery.img
when this completes sucessfully, type "fastboot reboot recovery", which should take you straight there, then continue with the previous post instructions.
TWRP Recovery IMG Download
htc desire hd 2.3.5gb
marknoll said:
U need to connect device to PC and issue a cmd prompt "adb reboot bootloader". Then in bootloader ,type fastboot getvar all..and post its results
WE need these details so we can properly assist you.
Click to expand...
Click to collapse
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
hi
greetings
here are the details please let me know how can i s-off ,as of i have unlocked boot loader and rooted my phone.
thanks ®ards
C:\Users\Dell>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.0.0
INFOserialno: SH141RX04662
INFOimei: 356812046211593
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: HTC__038
INFObattery-status: good
INFObattery-voltage: 4194mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.015s
greetkl said:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
hi
greetings
here are the details please let me know how can i s-off ,as of i have unlocked boot loader and rooted my phone.
thanks ®ards
C:\Users\Dell>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.0.0
INFOserialno: SH141RX04662
INFOimei: 356812046211593
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: HTC__038
INFObattery-status: good
INFObattery-voltage: 4194mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.015s
Click to expand...
Click to collapse
Aahk2 will benefit you. You will probably need to turn SD into a gold card so you can supercid..search aahk2. There you will find valuable info. ?
aahk2
marknoll said:
Aahk2 will benefit you. You will probably need to turn SD into a gold card so you can supercid..search aahk2. There you will find valuable info. ?
Click to expand...
Click to collapse
where to download aahk2 ? the links are dead can you please post me the thread where i can download the required tools.
thanks & regards
http://forum.xda-developers.com/showthread.php?t=2367322
Sent from my ATRIX HD
aahk2
marknoll said:
http://forum.xda-developers.com/showthread.php?t=2367322
Sent from my ATRIX HD
Click to expand...
Click to collapse
the links are dead
Hey guys , my htc m8 on soft brick and im looking for a twrp ROM , i tried a few but i didn't get the right one , can anyone plz provide me the right IMG
Code:
[CENTER]C:\Fastboot>fastboot getvar all
< waiting for device >
INFOversion: 0.5
INFOversion-bootloader: 3.19.0.0000
INFOversion-baseband: 1.29.214500021.12G
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 6.12.111.4
INFOversion-misc: PVT SHIP S-ON
INFOserialno: FA43CWM08637
INFOimei: 358714050345655
INFOimei2: Not Support
INFOmeid: 00000000000000
INFOproduct: m8_ul
INFOplatform: hTCBmsm8974
INFOmodelid: 0P6B10000
INFOcidnum: T-MOB101
INFObattery-status: good
INFObattery-voltage: 0mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 76df2b54
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.089s[/CENTER]
I will be very grateful guys , u will save my life
official TWRP website
https://dl.twrp.me/m8/
ahmed.ismael said:
official TWRP website
https://dl.twrp.me/m8/
Click to expand...
Click to collapse
thx buddy but i need the ROM
zodijacky said:
thx buddy but i need the ROM
Click to expand...
Click to collapse
why you are so mysterious
you need the stock rom ??
https://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
you need a custom rom ??
https://forum.xda-developers.com/htc-one-m8/development
and
https://forum.xda-developers.com/htc-one-m8/orig-development
sorry bro if i seem mysterious , but my phone is soft bricked , no os in it , i installed twrp in it and all i need is twrp ROM to get it working again !
zodijacky said:
sorry bro if i seem mysterious , but my phone is soft bricked , no os in it , i installed twrp in it and all i need is twrp ROM to get it working again !
Click to expand...
Click to collapse
Well if you looking for a full stock condition then you need to flash the RUU.zip from here
https://www.androidfilehost.com/?fid=24399965296001026
And use this steps ( all the steps ) but use the RUU above
http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
If you just need a rom use one from the links i posted earlier
Sent from my HTC M8 using XDA Labs
zodijacky said:
sorry bro if i seem mysterious , but my phone is soft bricked , no os in it , i installed twrp in it and all i need is twrp ROM to get it working again !
Click to expand...
Click to collapse
TWRP is a recovery, not a ROM.
Any ROM intended for the M8 will work on your device, and with TWRP (with exception ones which are intended for Sprint, Verizon, dual SIM, etc.). So just about any ROM for the T-Mob or "generic" international M8 development sections.
Also, you should delete your IMEI and serial numbers from the top post. These are personal info, and should never be posted online.