[GUIDE] Disable "logd" process - NO MORE BATTERY DRAIN [ALL ROMs] [ROOT req]
Hi all,
I have the G4 (H815) for over 6 months and always (both Lollipop and Marshmallow) I have been suffering from a tremendous battery drain.
After a lot of research I discovered that the reason (the main reason) of my battery drain is due to "logd" process that normally burned over 15% (or more) for each charge cycle (checked with Better Battery Stats).
Obviously I tried everything, full wipe, change ROM but that process was always there to suck battery them.
I do not know why the process is so high but I know that deactivating it the problem is automatically solved
So finally I found a way to eliminate the underlying problem permanently by disabling the logd process from TWRP.
if you also have this problem, follow this simple guide and you will solve the problem permanently.
After disabling "logd" process the only evidence it is that logcat no longer works but for many I do not think it's a problem.
Anyway you can always go back and put everything back as it was.
[Before Start]
I suggest you to make a FULL BACKUP before you follow this guide.
I am not responsible if your brick your phone.
[Prerequisites]
Root
TWRP
[Step by step Guide]
Reboot phone into Recovery (TWRP) and click "Mount"
Check System and then press "back"
Click "Advanced"
Click "File Manager"
Choose the "system" folder
Choose "bin" folder
Choose "logd" file and press "Select"
Click "Rename files"
Add ".bak" and then press "Go"
Swype right to confirm
Press Home button
Restart => System
Now, "logd" process is permanently disabled and should not appear between processes (verified with Better Battery Stats).
To put everything back as it was before, just rename back "logd.bak" file to "logd" by following the same procedure above.
See the attached screen for a visual guide.
I also attach my battery stats AFTER disabling the "logd" process.
Before deactivating I did not reach the 2 hours of SOT. Now they are 4 or more with 20hrs of standby
All without Amplify or other battery savers
Let me know if this works for you.
EDIT:
Some users reported that renaming \system\bin\logd to \system\bin\logd.bak using a root explorer and then reboot .. works too.
Ty.
If you find this guide useful ... press "Thank you". :good:
Here other screenshots:
great job
Is this problem also existing in V20D ???
Sent from my LG-H815 using Tapatalk
Hani88 said:
great job
Is this problem also existing in V20D ???
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
Yes,
10X ... and 20X ...
Tried also with Genesys 3.X.
Test is running, thank you.
HorstiG said:
Test is running, thank you.
Click to expand...
Click to collapse
This works the same with a file explorer. But you should reboot.
HorstiG said:
This works the same with a file explorer. But you should reboot.
View attachment 3635426
Click to expand...
Click to collapse
thank
where is the file ?
EDIT : i have found ...good ! thank again
HorstiG said:
This works the same with a file explorer. But you should reboot.
View attachment 3635426
Click to expand...
Click to collapse
In my case after restart, logd.bak was renamed back to logd.
Renamed instead from TWRP it stay.
Please check periodically that file was not renamed back.
aferende said:
In my case after restart, logd.bak was renamed back to logd.
Renamed instead from TWRP it stay.
Please check periodically that file was not renamed back.
Click to expand...
Click to collapse
OK
After 5 reboots.
Loulou-13 said:
thank
where is the file ?
EDIT : i have found ...good ! thank again
Click to expand...
Click to collapse
root/system/bin/logd
I was too slow
aferende said:
In my case after restart, logd.bak was renamed back to logd.
Renamed instead from TWRP it stay.
Please check periodically that file was not renamed back.
Click to expand...
Click to collapse
we can move it and keep it on another place ? no ?
Loulou-13 said:
we can move it and keep it on another place ? no ?
Click to expand...
Click to collapse
Yes it's the same. I keep there just to remember source folder.
aferende said:
Yes it's the same. I keep there just to remember source folder.
Click to expand...
Click to collapse
.....and the system don't rewrite it on this bin file by a remove after a reboot ?
Loulou-13 said:
.....and the system don't rewrite it on this bin file by a remove after a reboot ?
Click to expand...
Click to collapse
In my case and using TWRP ... No
Unfortunately, I realized that my system runs much non-circular. I test further.
The file renaming with Explorer works the same.
Nice job
Enviado desde mi LG-H815 mediante Tapatalk
HorstiG said:
Unfortunately, I realized that my system runs much non-circular. I test further.
The file renaming with Explorer works the same.
Click to expand...
Click to collapse
What do you mean for "non-circular" ?
aferende said:
What do you mean for "non-circular" ?
Click to expand...
Click to collapse
It runs rough.
I have the Loggong reactivated and my system is running as well as ever. Several times tested.
I suspect that the battery saving on cost of slower system goes.
yes... :good:
it seem good by removing this file . with "es explorer" , i put it on sd0 (on "es explorer backup" for example for to keep it in case of ...)
i reboot the phone and don't see it again on this system/bin file...
HorstiG said:
It runs rough
Click to expand...
Click to collapse
Ok ty for reporting.
All users please report if you notice something like this
Related
Notification setting is disabled Huawei P6-U06 version B107.
Please help if it possible, to enable the status bar.
I don't want use the 3 party applications.
If need phone could be rooted.
leoisr said:
Notification setting is disabled Huawei P6-U06 version B107.
Please help if it possible, to enable the status bar.
I don't want use the 3 party applications.
If need phone could be rooted.
Click to expand...
Click to collapse
that should not be ... is that the international version of B107?
try to make factory default, think that should work or try to reflash the B107 ...
good luck
Have disappeared because they match the folder path CUST.
First you must be ROOT
Second with Root Explorer app, go to the folder "data" and see the contents of custom.bin
Depending on the file custom.bin say, is as it should rename folders CUST.
For example if it says "Orange/dm", that means that inside the folder "CUST" the folder must exist "Orange" and within it another folder "dm".
If not there you can rename the folder "Channel" to "Orange" and within it you choose to rename the folder to "dm" much of the country that depends on where you live, could be renamed folder "namerica" to "dm" or "neeurope" to "dm"
Finally do a factory reset
Best Regards
leoisr said:
Notification setting is disabled Huawei P6-U06 version B107.
Please help if it possible, to enable the status bar.
I don't want use the 3 party applications.
If need phone could be rooted.
Click to expand...
Click to collapse
i can confirm that a factory reset fixes this as this happened to me as well lol
Thanks. Factory reset does not help.
leoisr said:
Thanks. Factory reset does not help.
Click to expand...
Click to collapse
Try installing B111 international rom and revert.
"custom.bin" method does not work. For some reason I have "unicom/cn" inside custom.bin. Tried to change custom to Orange/Dm does not work. Tried to rename Orange directory to "unicom" and dm Directory to cn does not work.
Anyway thanks
leoisr said:
"custom.bin" method does not work. For some reason I have "unicom/cn" inside custom.bin. Tried to change custom to Orange/Dm does not work. Tried to rename Orange directory to "unicom" and dm Directory to cn does not work.
Anyway thanks
Click to expand...
Click to collapse
Of course, if it works, I've tried several times and if it works.
Maybe I did not understand the procedure.
I'll try to explain it better:
1. You must be ROOT
2. Having installed the app Root Explorer
3. Log in to Root Explorer and find the file custom.bin
4. You must remember the contents of this file.
5. Go to the root folder, using the Root Explorer
6. Go to the folder Cust
7. Rename the folders according to the content of step 3.
8. Perform Factory Reset
At no time should change the file contents custom.bin.
Best Regards
succed the process, but bring more painful problem.
reyncla said:
Of course, if it works, I've tried several times and if it works.
Maybe I did not understand the procedure.
I'll try to explain it better:
1. You must be ROOT
2. Having installed the app Root Explorer
3. Log in to Root Explorer and find the file custom.bin
4. You must remember the contents of this file.
5. Go to the root folder, using the Root Explorer
6. Go to the folder Cust
7. Rename the folders according to the content of step 3.
8. Perform Factory Reset
At no time should change the file contents custom.bin.
Best Regards
Click to expand...
Click to collapse
i have try this steps and i did many times, and every time my notification toggle bottom arrive, but the small down arrow to hide home bottons(back, home, task) no longer exist, and my default file manager gone after that, i am using B111 ROM.
QuakeString said:
i have try this steps and i did many times, and every time my notification toggle bottom arrive, but the small down arrow to hide home bottons(back, home, task) no longer exist, and my default file manager gone after that, i am using B111 ROM.
Click to expand...
Click to collapse
The ability to hide bottom bar is not in B111 ROM. Other versions like the chinese B116 got it.
It is
warea said:
The ability to hide bottom bar is not in B111 ROM. Other versions like the chinese B116 got it.
Click to expand...
Click to collapse
It does i activated it last night in BuildProp Editor (root required) set ro.config.hw_shownavisettings = true
I have the same problem.
So i downloaded notification toggle from j4velin : http://forum.xda-developers.com/showthread.php?t=1037817
leoisr said:
Notification setting is disabled Huawei P6-U06 version B107.
Please help if it possible, to enable the status bar.
I don't want use the 3 party applications.
If need phone could be rooted.
Click to expand...
Click to collapse
I have the same problem. I upgraded to B111. Tried to factory reset and force upgrade with other versions (B107, B114, B112), but doesn't help.
(I'am from hungary sorry for my bad english )
Give the chinese rom a try
Was able to solve the problem
Return to factory settings.
improves
Zahidow said:
Return to factory settings.
improves
Click to expand...
Click to collapse
i did factory reset,
i did b118 rom force update again factory reset but i can not see it.
i have install b108 rom, i see notification toggle.
b118 rom not working notification toggle.
m3y said:
i did factory reset,
i did b118 rom force update again factory reset but i can not see it.
i have install b108 rom, i see notification toggle.
b118 rom not working notification toggle.
Click to expand...
Click to collapse
You have to rename some folder in "cust" folder according to your country.
goce.nakov said:
You have to rename some folder in "cust" folder according to your country.
Click to expand...
Click to collapse
I need to change which folders? (in "cust")
m3y said:
I need to change which folders? (in "cust")
Click to expand...
Click to collapse
What ever you want
It can be downloaded via Kies or checking for software updates via About Phone
Someone who is downloading this before applying it grab a copy from your/cache folder and post it here please
im downloading an update now sweet
you can use kies to download the update
kintwofan said:
Someone who is downloading this before applying it grab a copy from your/cache folder and post it here please
Click to expand...
Click to collapse
grabbing it right now.
Nice...
Why is the right door always locked?
hasbrobot said:
Nice...
Why is the right door always locked?
Click to expand...
Click to collapse
or atleast i am trying to. i have root access and trying to copy/past from the cache folder to external sd or any other location for that matter seems to be failing. first time attempting this. what am i forgetting?
Keyan said:
or atleast i am trying to. i have root access and trying to copy/past from the cache folder to external sd or any other location for that matter seems to be failing. first time attempting this. what am i forgetting?
Click to expand...
Click to collapse
Is the file actually there but you aren't able to copy it over to external SD?
blazinazn said:
Is the file actually there but you aren't able to copy it over to external SD?
Click to expand...
Click to collapse
it is definitely there from what i can tell. It's named update.zip, it was modified today, and it is 614MB
maybe it wont let me grab it because the phone is on? should i power off and grab it via usb cable? currently trying to modify it via Root File Manager App.
Keyan said:
it is definitely there from what i can tell. It's named update.zip, it was modified today, and it is 614MB
maybe it wont let me grab it because the phone is on? should i power off and grab it via usb cable? currently trying to modify it via Root File Manager App.
Click to expand...
Click to collapse
Is it giving you any kind of error? Since it's Write only, you'll probably have to change the permissions to be able to copy it from the cache folder. You should be able to do it with Root File Manager. I know I can with Root Explorer.
blazinazn said:
Is it giving you any kind of error? Since it's Write only, you'll probably have to change the permissions to be able to copy it from the cache folder. You should be able to do it with Root File Manager. I know I can with Root Explorer.
Click to expand...
Click to collapse
well root file manager says it was read/write for the owner so i changed the permissions to read/write for all users. then i attempted to rename it to 1update.zip.....and then the file disappeared.
Keyan said:
well root file manager says it was read/write for the owner so i changed the permissions to read/write for all users. then i attempted to rename it to 1update.zip.....and then the file disappeared.
Click to expand...
Click to collapse
Weird, will it let you download it again since you renamed it?
blazinazn said:
Weird, will it let you download it again since you renamed it?
Click to expand...
Click to collapse
i tried running software update again and it gave me an error "Your device has been modified, Software updates are not available"
wellllllllllllll it looks like I botched it up big somehow. I definitely didn't delete the file. damnit
I'm d/l via OTA
fatesealer said:
Galaxy Note 4.3 update live as of 12/9/13
Click to expand...
Click to collapse
This is Galaxy Note 2 forum
rosedog said:
I'm d/l via OTA
Click to expand...
Click to collapse
I wonder what feature I'm NOT going to get...
---------- Post added at 02:21 PM ---------- Previous post was at 02:19 PM ----------
Keyan said:
i tried running software update again and it gave me an error "Your device has been modified, Software updates are not available"
wellllllllllllll it looks like I botched it up big somehow. I definitely didn't delete the file. damnit
Click to expand...
Click to collapse
run Triangle away and enable tracking and reboot (if you are already turn off tracking > reboot > turn on tracking > reboot ~ status should be normal now).
Keyan said:
i tried running software update again and it gave me an error "Your device has been modified, Software updates are not available"
wellllllllllllll it looks like I botched it up big somehow. I definitely didn't delete the file. damnit
Click to expand...
Click to collapse
Does it say say your device is modified under Menu > Settings > About Phone > status?
Try rebooting the phone.
blazinazn said:
Does it say say your device is modified under Menu > Settings > About Phone > status?
Try rebooting the phone.
Click to expand...
Click to collapse
i created a 0byte file named update.zip in the cache folder and rebooted, and now it is telling me it is ok to install. (my battle level is below 50% so it wont let me). so i cured the modified error. but the actual download is still MIA. says device status is normal. it was probably kicking that error because it couldnt find the update.zip since i somehow renamed it and it decided to play Where's Waldo.
Keyan said:
i created a 0byte file named update.zip in the cache folder and rebooted, and now it is telling me it is ok to install. (my battle level is below 50% so it wont let me). so i cured the modified error. but the actual download is still MIA. says device status is normal. it was probably kicking that error because it couldnt find the update.zip since i somehow renamed it and it decided to play Where's Waldo.
Click to expand...
Click to collapse
That's odd, mine is at 16% and d/l on LTE. I'm stock rooted.
Keyan said:
i created a 0byte file named update.zip in the cache folder and rebooted, and now it is telling me it is ok to install. (my battle level is below 50% so it wont let me). so i cured the modified error. but the actual download is still MIA. says device status is normal. it was probably kicking that error because it couldnt find the update.zip since i somehow renamed it and it decided to play Where's Waldo.
Click to expand...
Click to collapse
Strange that the download just disappeared. Have you tried searching for the file?
rosedog said:
That's odd, mine is at 16% and d/l on LTE. I'm stock rooted.
Click to expand...
Click to collapse
you can download it but you won't be able to install it until you are over 50% battery life.
When I'm using my phone with it's stock ROM installed and I don't set manually the IP parameters, my device has a WiFi disconnect issues. After a lot of searching, I finally found a solution to fix the problem !
Steps :
Before, make a copy or a backup of the file wpa_supplicant.conf which is present in /system/etc/wifi/ (using a file manager with root permissions, such as Root Explorer)
Open it and search for ctrl_interface, its value used to be : ctrl_interface=/data/system/wpa_supplicant
Replace it with eth0 and it will look like : ctrl_interface=eth0
Delete ctrl_interface_group line and its value
Save the file and change the permissions to 777
Reboot your phone (and wipe dalvik-cache if there's a glitch)
I can't guarantee anything but at least for me it worked and I wanted to share it with the community.
Doesn't work.
I can't save edited file :/
Dant3s said:
I can't save edited file :/
Click to expand...
Click to collapse
I'm sorry to say that after a lot of testing, I found that my tip doesn't really work. :/
But I can help you about your issue ! Are you root ? Have you busybox installed ?
BlackGunZ said:
I'm sorry to say that after a lot of testing, I found that my tip doesn't really work. :/
But I can help you about your issue ! Are you root ? Have you busybox installed ?
Click to expand...
Click to collapse
Yes, I have root and busybox, I'm using Hyperion 9 rom now but still having wifi issue
Dant3s said:
Yes, I have root and busybox, I'm using Hyperion 9 rom now but still having wifi issue
Click to expand...
Click to collapse
As I said before, unfortunately it dosen't work. :/
If you suffer too from random disconnects (every 5 mins for example), you can set manually the settings in your Wi-FI parameters. (DNS, submask address ect ..)
Hello, as some of you may already know, we can't flash MM kdz on our LG Spirit using LG Flash Tool, so we have to use LG UP, a method which is also used by LG G4c owners. I drew the idea from them, since G4c and Spirit are practically the same devices. I've modified a script from G4c, all credits go to @bender_007.
So here are the steps:
1. Make sure you have USB drivers installed.
2. Download and install LG UP: http://www.filedropper.com/g4 ---- First install LGUP_8994_DLL_Ver_0_0_3_23, then LGUP_Install_Ver_1_14_3.
3. Download the script that makes LG UP recognize our device as H440n(Courtesy of @bender_007, I only modified small parts of it). Link: https://www.dropbox.com/sh/lbxdwloffi75qqg/AABfz5e9AIiSxipsnZQIiikGa?dl=0 (Download as zip)
4. Extract the zip and run h440n.bat
5. Connect your Spirit in MTP mode.
6. Run LG UP and wait for it to load.
7. Leave all settings as they are.
8. Under file path, browse to the kdz file you downloaded. NOTE: It won't show in the directory it is in, because the browse window sees only .tot files, so you have to manually type in the KDZ name in the text field and select it that way.
9. Click Start
10. Wait
11. ???
12. Profit! Enjoy your LG Spirit running Marshmallow!
Thanks, I had to manually copy the dll in the LGUP folder, dunno if it's my fault, or script's fault though.
EDIT: It gives me an error on boot, about CUST not existing... Nothing important, I can continue to use it but it's rather annoying? Fixes? Thanks.
guglicap said:
Thanks, I had to manually copy the dll in the LGUP folder, dunno if it's my fault, or script's fault though.
Click to expand...
Click to collapse
I suppose yours, because it worked for me flawlessly. If someone notices any errors in modifications I made to the script, feel free to correct me.
Fobos531 said:
I suppose yours, because it worked for me flawlessly. If someone notices any errors in modifications I made to the script, feel free to correct me.
Click to expand...
Click to collapse
Depending on OS and security level it can happen, it might need an elevated access- Try: right click - run as administrator
Poslano sa mog SM-G930F koristeći Tapatalk
Had to also copy everything over manually, running as admin didn't help. I haven't done anything to my security settings and am running on the only account that was created with the install. I think it might have something to do with me running on dev mode though.
jonixas said:
Had to also copy everything over manually, running as admin didn't help. I haven't done anything to my security settings and am running on the only account that was created with the install. I think it might have something to do with me running on dev mode though.
Click to expand...
Click to collapse
nah, I also run dev mode. No worries I'll create a desktop app which will then work.
Poslano sa mog SM-G930F koristeći Tapatalk
Afternoon fellas. I have reached the part of runinng the kdz via LGUP however the kdz i have (named H525n20c_00_0321.kdz) brings back an error of invalid kdz. Could someone be so kind as to point out a working link for the kdz if possible?
Thanks
Diarno said:
Afternoon fellas. I have reached the part of runinng the kdz via LGUP however the kdz i have (named H525n20c_00_0321.kdz) brings back an error of invalid kdz. Could someone be so kind as to point out a working link for the kdz if possible?
Thanks
Click to expand...
Click to collapse
Firstly, do you have LG Spirit or LG G4c?
guglicap said:
Thanks, I had to manually copy the dll in the LGUP folder, dunno if it's my fault, or script's fault though.
EDIT: It gives me an error on boot, about CUST not existing... Nothing important, I can continue to use it but it's rather annoying? Fixes? Thanks.
Click to expand...
Click to collapse
I had to manually move dll too. But I made it!
@Fobos531 hello good job . bro I can install MM on lg spirit 4g H440F
Mark XP said:
@Fobos531 hello good job . bro I can install MM on lg spirit 4g H440F
Click to expand...
Click to collapse
Wait until H440F kdz is released.
P.S.: I had to copy all files manually and manually Merge registry script. Probbably some Windows 10 BS with UAC and bat scripts lately.
Another BS, now from phone - MSC error on boot. But that temp root isn't availiable :/
Im stupid, what is MTP mode?
MadjijaHacker said:
Im stupid, what is MTP mode?
Click to expand...
Click to collapse
Regular mode what is enabled by Deafult on KitKat and newer ROM's. It is also known as Media Transfer Protocol and when you connect phone it should look something like this (screenshot from my PC with my current device connected because of copying nandroid backup to PC)
Antoher note: for LG Spirit it looks like Phone Icon, not Media Device.
midzan21 said:
Regular mode what is enabled by Deafult on KitKat and newer ROM's. It is also known as Media Transfer Protocol and when you connect phone it should look something like this (screenshot from my PC with my current device connected because of copying nandroid backup to PC)
Antoher note: for LG Spirit it looks like Phone Icon, not Media Device.
Click to expand...
Click to collapse
I knowed that, but i didnt know what is name of it.
i have a few questions, can i back to lollipop? and the adoptable storage is working?
BrainNotFound said:
i have a few questions, can i back to lollipop? and the adoptable storage is working?
Click to expand...
Click to collapse
Yes, you can get back by flashing kdz using LG Flash Tool and as far I saw there isn't enabled Adoptable Storage.
Can you do the same for the LG Spirit h420?
Can someone upload photos ?? Do you feel any diference ate speed or maneging RAM ??
jopafon said:
Can someone upload photos ?? Do you feel any diference ate speed or maneging RAM ??
Click to expand...
Click to collapse
Just check General Info Therad here (last 2-3 pages) - http://forum.xda-developers.com/android/development/lg-spirit-h440n-thread-t3108435
BrainNotFound said:
i have a few questions, can i back to lollipop? and the adoptable storage is working?
Click to expand...
Click to collapse
To anyone interested:
I got adaptive storage to work! It's pretty simple. Just follow the guide from modaco.com (search for "modaco adaptive storage galaxy s7" on google", I don't think I can post links).
Then go to Settings -> Storage & USB -> Your SD Card -> Merge (in the additional menu).
Mod for OPR1.8.1.10/8.2.1.
Needed ROOT.
Flash through TWRP at your own risk. Wipe only dalvik-cache. Before flashing make backup system and data.
Has disconnected blinking of diode at a charge below 15%.
Tap statusbar clock to sleep.
Disable all system apps in the standard application manager.
Rom Control (to work correctly you need Busybox) (source here).
USB Plug/Unplug disable wake up (On/Off).
Backlight touch buttons (On/Off).
Allow fingerprint unlock after a reboot (On/Off).
Change low and critical battery warning percentages.
Mobile activity In-Out Icon in status bar (On/Off).
Opening applications by longpress on clock in status bar.
FactoryKit Test in Rom Control/Apps/ (no need *#*#6484#*#*).
Advanced menu "Mobile network" in Rom Control/Apps/.
Long press volume up/down for skipping tracks.
Long press "Back" kill app.
Long press "Home" (disable/Search (default)/start your application).
Download.
Thanks @Alex&rK, @tdunham.
i appreciate your work.. but the steps are not clear...
download the attached file are place it in /system/ and give permission
replace the service.jar file present in /system/framework/ with the attached file??
is there a way to keep them on all time till screen goes off?
Tap Statusbar Clock to Sleep Mod in OP.
Chris_Cheekyz said:
replace the service.jar file present in /system/framework/ with the attached file??
Click to expand...
Click to collapse
Yes. You also need to delete .odex file, since my files are deodexed.
kep2008 said:
Tap Statusbar Clock to Sleep Mod in OP.
Yes. You also need to delete .odex file, since my files are deodexed.
Click to expand...
Click to collapse
If I don't want to delete odex, what will happen ?
Desire 1007 said:
If I don't want to delete odex, what will happen ?
Click to expand...
Click to collapse
I think that changes I have made will not apply.
Although I did not check this and everything will work without removing .odex.
Bootloop
Chris_Cheekyz said:
Bootloop
Click to expand...
Click to collapse
Rechecked again. If done as described in the OP, everything works fine...
How to give permission 0644 ?
rex28818 said:
How to give permission 0644 ?
Click to expand...
Click to collapse
I'm using Root Explorer. Long tap on file, select "permission"
kep2008 said:
I'm using Root Explorer. Long tap on file, select "permission"
Click to expand...
Click to collapse
hey..can u help me??
i folow ur tutorial and now my google ap is crash
i forget to backup service.jar and services.odex
can u uploaded it for me??
ty in advance
norskelegion said:
i forget to backup service.jar and services.odex
can u uploaded it for me??
ty in advance
Click to expand...
Click to collapse
Take here
https://yadi.sk/d/NnrbwxTa3NXAd7
kep2008 said:
Rechecked again. If done as described in the OP, everything works fine...
Click to expand...
Click to collapse
should i need to keep the services.jar file in "system/" folder or i need to move it to "system/framework/" ?
services.jar file should be present in both the folder "system/" as well as "system/framework/" ?
Chris_Cheekyz said:
should i need to keep the services.jar file in "system/" folder or i need to move it to "system/framework/" ?
services.jar file should be present in both the folder "system/" as well as "system/framework/" ?
Click to expand...
Click to collapse
You need to replace stock services.jar with my file. In /system/ I give it permissions and move it to framework/.
services.jar should only be in framework/
Thank you
Is there a way to only have backight on the middle button on and disabled on the other buttons?
kep2008 said:
Take here
https://yadi.sk/d/NnrbwxTa3NXAd7
Click to expand...
Click to collapse
ty so much :good:
will it work in new build?
Chris_Cheekyz said:
will it work in new build?
Click to expand...
Click to collapse
Use an app called "keyboard backlight controller" on playstore to turn off backlight.
How to enable Software Navigation Buttons and disable the soft keys?