Hi guys having a problem just bought a moto 360. Whenever I install the android wear app whenever I open it it just says android wear needs a refresh please uninstall and reinstall from playstore. Any ideas on how to solve this?
Nobody? hopefully I'm not being an idiot. Running viperone rooted s-off latest firmware
elevatorguy said:
Nobody? hopefully I'm not being an idiot. Running viperone rooted s-off latest firmware
Click to expand...
Click to collapse
I met the same issue after paired my SW3. I tried several times to reinstall android wear app from google play. But it shows the same message to ask me refresh again and again.
I checked logcat and found that android wear cannot bind gservice. So I guess that because I disabled google search app. Then I enable it and the problem is solved.
Check if your google search is enabled and hope it will help you.
I figured it out. It was google search had it frozen all is well now ☺ Been so busy hadn't had a chance to update this thread. But thanks anyway
Thank you guys so much for your posts.. I couldn't figure out myself why I kept getting the refresh/uninstall error but I had google search frozen myself!
ReDz
Hi,
Last night my asus zenwatch stopped working and displayed the error message stating that google play services have stopped working, and from that moment i haven't been able to do any actions on my watch apart from powering off the device. i have contacted google for troubleshooting any they couldn't help me. so i was wondering if you could help me to fix this problem
thanks in advance
Peachy2015 said:
Hi,
Last night my asus zenwatch stopped working and displayed the error message stating that google play services have stopped working, and from that moment i haven't been able to do any actions on my watch apart from powering off the device. i have contacted google for troubleshooting any they couldn't help me. so i was wondering if you could help me to fix this problem
thanks in advance
Click to expand...
Click to collapse
It's normal for it to say that when it's stopping Play Services to install a new version. (Mine did that a few days ago.) Maybe you've gotten it into a bad state by powering it off while it was in the middle of trying to update? You might try uninstalling Play Services on your phone, then reinstall it, and give the watch some time to transfer and install it there.
CSX321 said:
It's normal for it to say that when it's stopping Play Services to install a new version. (Mine did that a few days ago.) Maybe you've gotten it into a bad state by powering it off while it was in the middle of trying to update? You might try uninstalling Play Services on your phone, then reinstall it, and give the watch some time to transfer and install it there.
Click to expand...
Click to collapse
Same problem, android wear force to use newest google play service, but after the google play service transfered to the watch, it stopped working and disconnected:crying:
Just do a factory reset on the watch. When first turning it on at the first Asus screen swipe down diagonally from right to left. This will start it in recovery mode. From there follow on screen prompt to navigate to wipe data and restart.
I have same problem to, from first time i conecting this zenwatch to my zenfone 2
I've tried many ways, and then the last i did...
- Uninstall Android ware ( that updated )
- I try to install android wear oldest version from apk miror that 1.1.1.2113877
- reset my zenwatch and try to conect with oldest android wear
I am so happy that always conect to my zenwatch
- Update firmware my zenwatch
- after finish, i try to uninstall old android wear and install again from play store (updated),
- this work until now...
It works like a charm...
Thx a lot.
am running stock V20H EUR not rooted nothing...... but I can't locate my phone using android device manager and I can't request a ring, I checked the google settings it is all ON, and I tried deleting cache both google play services and the App itself and still I can't use it
anyone knows what to do? I tried reinstalling rebooting the phone... nothing
Thanks
anyone?
It seems android device manager isn't working. I tried to locate my cellphone but to no avail. However , I located it from this place: https://lge.mcafeemobilesecurity.com- I am on V20I.
twisted_twice said:
It seems android device manager isn't working. I tried to locate my cellphone but to no avail. However , I located it from this place: https://lge.mcafeemobilesecurity.com- I am on V20I.
Click to expand...
Click to collapse
good to know am not the only one who has the problem on G3, I also got this McAfee security app but I do prefer the Android device manager, thanks mate
I got zenwatch yesterday and i downloaded android wear watch and i connected it fine but when i tried to download zenwatch manager i cant connect it in anyway to it no matter how much i try or reset im frustrated . i have note 3 version 5.0
Loner123 said:
I got zenwatch yesterday and i downloaded android wear watch and i connected it fine but when i tried to download zenwatch manager i cant connect it in anyway to it no matter how much i try or reset im frustrated . i have note 3 version 5.0
Click to expand...
Click to collapse
Go into watch Settings, About, and then System updates. Download the latest Android watch version. After updating, the ZenWatch Manager should connect with the phone.
Sent from my LG-H901 using Tapatalk
ljg600 said:
Go into watch Settings, About, and then System updates. Download the latest Android watch version. After updating, the ZenWatch Manager should connect with the phone.
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
Everytime i click system updates it says this "LWX49K_FULL"
Hi all,
Today, I installed fitwear onto my SW3. For those of you who don't know, fitwear is an alternative system designed and made by a Chinese company called Lianluo, here is their website: http://fitwear.lianluo.com/ . In this version (Android v5.1.1) I found, it supports English, in addition, it supports OTA upgrade. However, this system seems to be free from google services.
This system does not require Android Wear APP.
OTA upgrade requires an Android Phone.
I have attached the files that I used. It contains: (I DID NOT made any of these tools, I only did translation.)
Driver: install the common fastboot driver in FlashTool first.
CMD easy Flash Tool: I translated it into English.
recovery: unknown purposes.
fitwear: v1.0, can be upgraded to v1.2 via OTA. (Build 20170118)
Android Wear (unknown version): I did not roll back to AW and I haven't check the version.
Orignial Chinese tutorial and flash_chs.bat: Read it if you can.
Installation Steps:
Install Flashtool driver from FLASHTOOL and the driver provided.
Extract the zip and run flash.bat (admin not needed).
Unlock your watch using the cmd if you haven't.
Flash Fitwear.
Reboot to fitwear.
Download the fitwear app onto your phone and connect to watch.
Link: https://drive.google.com/file/d/0B9OX6FDB6BzZaUlaYjlhSUVEdTg/view?usp=sharing
Link for v1.2 (by hardy272): https://drive.google.com/file/d/0B3t...ew?usp=sharing
Note: OTA upgrade needs the watch to be connected to some WIFI.
Disclaimer: By doing this you void your warrenty and I don't take any responsibility if your brick your device.
Do not distruibute!!! This is not thoroughly tested.
Reserved
I OTA upgraded to v1.2, nothing major changed, and I couldn't find a changelog. It seems that the watch would download something onto the phone to do the OTA upgrade, and I am wondering how to extract that out, or how to dump the entire system. Any help would be appreciated.
The battery seems to be nice, a lot of Chinese users reported very good battery usage. I guess that is due to the absence of Google Services.
I also noticed that OTA probably won't work with iOS.
Pictures:
Where did you find the rom for the SW3? On the downloads page of the website it allows me to download only the moto 360 one.
NicoGig said:
Where did you find the rom for the SW3? On the downloads page of the website it allows me to download only the moto 360 one.
Click to expand...
Click to collapse
On the famous Chinese version of Reddit: Baidu Tieba.
Link: https://tieba.baidu.com/p/4857846448
can u put music using google play or just connecting to the computer?
Looks like that the app is only in chinese https://itunes.apple.com/es/app/fitwear/id1078127859?mt=8
13im6b said:
can u put music using google play or just connecting to the computer?
Looks like that the app is only in chinese https://itunes.apple.com/es/app/fitwear/id1078127859?mt=8
Click to expand...
Click to collapse
On the change log, it says on version v1.9, they added English support. That APP works the same way as the Android Wear APP. You still have to play music on your phone, and on the watch you can control it.
some pic please, we wanna see the differences
dverbame said:
some pic please, we wanna see the differences
Click to expand...
Click to collapse
Will do on weekends! Drastically different from Android Wear.
Nice
there are to much bugs
Life4Play said:
there are to much bugs
Click to expand...
Click to collapse
Just off the basic features, I didn't encounter any. I will report back after OTA on weekends.
Fit Wear version 1.0 ios
I dont know why but with iPhone and The app i cant do Software updates. I cant open the dialer, birdie wear and The compass. Is it in android also?
Life4Play said:
I dont know why but with iPhone and The app i cant do Software updates. I cant open the dialer, birdie wear and The compass. Is it in android also?
Click to expand...
Click to collapse
I will try on weekends when I go back, I don't wear the SW3 now.
WORKING
I paired it with my android tablet and now it's working. Nice job!!!!!
can you post a link to directly download the 1,2 update as my internet is bad and i can't keep my watch connected to the wifi for long time
Here you Find some Pictures
https://forum.xda-developers.com/smartwatch-3/general/rom-fitwear-custom-rom-sony-smartwatch-3-t3589085
Life4Play said:
Here you Find some Pictures
https://forum.xda-developers.com/sm...fitwear-custom-rom-sony-smartwatch-3-t3589085
Click to expand...
Click to collapse
At least put in the orginial link ... What you did is bad.
iSpammer said:
can you post a link to directly download the 1,2 update as my internet is bad and i can't keep my watch connected to the wifi for long time
Click to expand...
Click to collapse
I have been trying to do that as well, I will dump one out during weekend.
Life4Play said:
I dont know why but with iPhone and The app i cant do Software updates. I cant open the dialer, birdie wear and The compass. Is it in android also?
Click to expand...
Click to collapse
I can confirm that the OTA does not work with iOS.
When i connect the watch with my pc the install script wont recognize the watch, and if i look in the device manager the watch is named tetra and has a yellow triangle above its icon.
The weird thing is i can reboot the watch via adb, so atleast the adb drivers must be ok. The watch itself is already rooted and has twrp on it, but i unlocked and installed twrp with linux because there the watch is fully functional ind fastboot mode.
So has anyone a solution for this, beside of installing various adb drivers or something like that. (and yes i tried mostly of them with no happy end, and even the flashtool drivers didnt work)
K4Y3R said:
When i connect the watch with my pc the install script wont recognize the watch, and if i look in the device manager the watch is named tetra and has a yellow triangle above its icon.
The weird thing is i can reboot the watch via adb, so atleast the adb drivers must be ok. The watch itself is already rooted and has twrp on it, but i unlocked and installed twrp with linux because there the watch is fully functional ind fastboot mode.
So has anyone a solution for this, beside of installing various adb drivers or something like that. (and yes i tried mostly of them with no happy end, and even the flashtool drivers didnt work)
Click to expand...
Click to collapse
You'll have to do this, to get Fastboot working:
Right-click the tetra item, and choose Update Driver.
Browse my computer for driver software.
Let me pick from a list of available driver on my computer.
Manufacturer: Google
Model: Bootloader
Next
Confirm
Profit?
Hopefully I didn't miss a step somewhere in there.
I just finished setting it up, and will report back my experience, after I get to play with it a little more.