Hi, last days, my S4 Mini were turned Off.
Phone don't react to AC adapter, and don't react for nothing...
PC recognized this phone as qhsusb_dload (Brick..),
So, i went to https://forum.xda-developers.com/showthread.php?t=2600869 , downloaded debrick.img from one of replies , and phone turned On ! When it turned on, screen looking like this:
BOOT RECOVERY MODE
CHECK BOOT PARTITIONS..
COPY FROM T-FLASH..
BOOT RECOVERY..
WRITE 139008 sectors..
FLASH WRITE FAILURE
ddi : mmc_read failed
ODIN MODE
PRODUCT NAME : GT-I9195
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-Config-LSB: 0x30
BOOTLOADR AP SWAEV:2
WRITE PROTECTION: Enable
Click to expand...
Click to collapse
So its time for firmware. I downloaded 4,4,2 from server and tried to flash, but ODIN shows There is no PIT partition.
then I downloaded pit file ad trying to load it by odin but it's hanged out on <ID:0/014> SetupConnection..... and then :
<ID:0/014> Initialzation..
<ID:0/014> Set PIT file..
<ID:0/014> DO NOT TURN OFF TARGET!!
<ID:0/014> FAIL!
<ID:0/014>
<ID:0/014> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
and phone shows:
MMC: mmc_read fail
PIT FAIL : TOTAL SECTORS (0)
Click to expand...
Click to collapse
What now? Please help me! Sorry for my bad english..
you must change the emmc chip, I have the same problem!
ps: you have flashed the wrong debrick.img, this is for i9205!
hasky93 said:
you must change the emmc chip, I have the same problem!
ps: you have flashed the wrong debrick.img, this is for i9205!
Click to expand...
Click to collapse
Okay Thanks. i Think that new mainboard will be easier to apply, and price will be drawed. I Have mainobard for 20$
Hey Guys,
I got here an N910F from a good friend to repair it.
She told me that the Phone was not more turning on after an Update.
When I get the phone into the Downloading mode(sd card method and all) I get this
ddi: mmc_read failed
ODIN MODE (HIGH SPEED)
Product Name: SM-N910F
...
UDC START
ODIN: flash read failure
Error: There is no pit binary.
MMC: mmc_read fail
I tryed to flash it with an DBT(Debranded German) Android 6.0.1 Rom and I still get that error.
What can I do now?
i can't flash my phone with officiel firmware
he say : system REV CHECK FAIL DEVICE: 2, BINARY: 1
my phone is A505F/DS
I think its because you are flashing an older firmware version, check the latest version for your device.
Hello everybody,
Today I tried to flash the following firmware with Odin. As in the instructions, I first flashed step 1 and then step 2 using Odin.
SM-A520FXXS8CSh5_8.1_REMOVE LOCK SCREEN WITHOUT LOSE user DATA WITH FRP ON bootloader ON
when booting I got the message:
Code:
NAD: PASSED
RPMB PROVISIONED
then i have flashed Step 1 and Step 2 with the following Image:
firmware.gsm-social
A520FXXS7CSAB_8.0_REMOVE LOCK SCREEN WITHOUT LOSE DATA WITH FRP ON OEM ON
Code:
FRP LOCK: ON
RP SWAEV: B: -1 K:8 S:8
sw rev. check fail(bootloader) device: -1, binary: 8
after that the phone did not start anymore. It can only be booted in download mode. I can no longer flash firmware because the binary version does not fit. I know that I need the right binary version, but of course there is no version -1. Is there a way to get the phone working again without losing the data.
many thanks for your help
Hi there,
Since I can not get pass thru "Custom binary (Recovery) blocked due to remaining installemnt balance" error while flashing TWRP I would like to ask, hot wo relock my bootloader...
KG STATEL Normal
FRP Lock: off
OEM Lock off
Varanty void: 0
latest Android 10 update...
I was waiting like 10 days OEM Unclock option didn't come....
any help?