tmobile sgh-t999 s3 wont boot completely need help - T-Mobile, Samsung Galaxy SIII

Hello everyone. I have a tmoble s3 that was once rooted and then updated with kies and ran on stock firmware. The phone was updated to the latest firmware but I had lost root. I left it alone and all was well for many months. The other day after charging the phone it was unable to complete the boot. I can boot to recovery and to download mode but it wont safe boot or normal boot it hangs up at the last phase. I took the phone in to a samsung rep and he tried to load the firmware on the phone he did a home recovery but the phone still doesnt complete the boot. I had already tried factory reset before taking it in and it failed. I am not sure how to fix it since it isnt rooted any ideas on how to fix the phone? Is it possilbe to fix this phone or is it just a paperwieght now? Can you odin a pre rooted rom on a phone that isnt rooted and wont boot in order to enable usb debugging or developer options? I have no idea how to proceed so any advice would be appreciated. Thanks in advance

To quickly check the phone's functionality, I suggest the following:
1) download Odin 3.07 from here: https://www.google.ca/url?sa=t&rct=j...07763241,d.dmo
2) download the tar version of TWRP 2.8.6.0 from here: https://dl.twrp.me/d2tmo/
3) download the latest cm12.1 for the phone from here ( http://www.cmxlog.com/12.1/d2tmo/) and save it to a micro SD card;
4) download the version of cm12.1 gapps you want from here (https://wiki.cyanogenmod.org/w/Google_Apps) and save it to the same sd card where you saved CM12.1;
5) place the micro SD card into the phone;
6) boot the phone into download mode;
7) open Odin 3.07 and uncheck everything except f. reset time;
8) click on PDA and browse to the tar TWRP file and select it;
9) connect the phone and it should show up as a com port in Odin;
10) flash TWRP;
11) when you see the word RESET in the status window, remove the USB cable, remove the battery, replace the battery, use the button combination to get into recovery which should now be TWRP;
12) perform a full wipe of system, data, and cache;
13) flash CM12.1 and gapps from the micro SD card;
14) reboot and enjoy

Related

[Q] CleanROM + error flashing zip = facedesking. Need help please. Info inside.

Ok so here is what I have done so far:
1.) I rooted via this method:
Step 1: Download Odin v3.07 and CF root (for non-AT&T variants, find the root file for your phone and plug that in for this CF root link. The rest of this guide should work for you). After you do that, right-click and extract the files to somewhere easily accessible (like your desktop).
Step 2: Go to Settings>Developer Options>turn developer options on>turn on USB debugging
Step 3: Make sure your phone is not connected to the computer at this point. Open up Odin, select PDA, navigate to CF-Auto-Root-....tar.md5
Step 4: Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button (in this case volume up)
Step 5: USB connect your phone to your computer and in Odin make sure Repartition is not checked. Leave everything else alone. Click the Start button and wait for your phone to reboot twice.​
2.) installed goomanager and ran the script that installs twrp for you and ran a recovery
3.) booted into twrp, cleared cache/d-something cache, did factory reset, and the system reset (forgot the exact name)
4.) tried to install cleanrom (had it on my internal SD card) and got the "error flashing zip" line
I've looked around reading everyone's solutions and it's come down to
a.) i need to reinstall/redownload and try again. Thing is, idk how to remove all this crap (my backup was created after doing the twrp stuff) so that I can reinstall
b.) twrp is the issue and i need to use CWM. again, not sure how to remove twrp before installing CWM and the guides that I've come across to install CWM aren't simple enough for me (im new to this)
Any insight would be great. I've been loading back into my backup trying to start over and I'm afraid if I keep messing around I will brick my phone which is why I have come to you guys. Trust me I've been looking stuff up for hours and I still can't seem to figure it out
I would do that, but it's just me.
-I would boot in recovery , wipe cache, dalvik, factory reset, and system.
-Boot in Download mode, flash the appropriate stock rom.
-Let it boot in stock rom.
What i do to root and install twrp.
- I boot in download I run cf-Autoroot through odin, then let it boot
- I boot in downaload again and run twrp through odin again let reboot (you need the correct twrp file to flash with odin).
You now have a freshly rooted and clean install of everything. Check Md5 or redownload CleanRom.
When i install cleanrom i reboot in recovery,I wipe cache, dalvik, factory reset and system, then i install the rom and reboot to system, i never had issues doing everything this way. I believe its the correct and clean way to do.

[Q] N5110 Note 8, is this "bricked"?

Hello,
I hope someone can help me. I'm not completely ignorant when it comes to rooting and flashing custom roms, but it's been a while since the last time I did (last time was my Samsung Galaxy S2). Today I decided I was going to root my N5110 Note 8 and install a 4.4.2 rom on it.
I decided I was going to install the Omni Rom linked here: http://forum.xda-developers.com/showthread.php?t=2569099
I apologize in advance for the long descriptions below.
Here are the steps and issues in the order that it happened:
1) Flashed CF-Auto-Root-konawifi-konawifixx-gtn5110 using Odin (Auto Reboot, F. Reset Time)
2) Downloaded Rom Manager App, and booted into Recovery from there.
3) Using CWM Recovery, I followed instructions as described on the Omni link and did a Wipe/Factory Reset
4) Using CWM Recovery, I selected to install zip from SDCard, and selected the omni-4.4.2-20140102-n5110-HOMEMADE.zip
5) After a few seconds, I got an error 7, and the installation aborted.
6) Tried to reboot back to the system, but of course now that everything is wiped, it just loops back to recovery.
7) I tried installing the zip again, same error. I checked the thread and someone mentioned the same error. OP mentioned using TWRP, so I went back into Download mode and flashed TWRP via Odin
8) After reboot, it went into TWRP. Tried installing zip again, same error. I decided I'll pick up another rom to try first. So, I took out my microSD card so that I can load the ROM over to it.
9) Booted back into TWRP - it no longer sees my SD card. Tried to power down from recovery menus in hopes to get it to see the sd card. No luck
10) I'm desperate now--I am trying to force it off by holding down the power button. It reboots back into recovery. I even try to get it back to download mode so I can flash CWM back on, in hopes that it will let me retry. But now it just shows the battery screen (like when you're charging it while powered off) at empty. I unplug the USB cable, the screen turns off.
11) I try to power it back on without the USB cable plugged in, nothing happens.
12) I plug the USB power back in, and it looks like it's booting up. It goes to the Samsung Note 8.0 N5110 screen and just flickers. The flickering increases in speed over time.
13) I force it back into Download mode, and try to run the CF Auto-Root again (like I said I'm desperate now).
14) After Odin reboots the device, it goes into the battery screen and is doing the weird flickering thing again.
I'm currently attempting to download XXCMH3_stock-rooted-official.zip in hopes to flash via Odin, but the d/l keeps timing out before the whole thing can be transferred.
Someone, please help! What am I doing wrong?
bbqnjl said:
Hello,
I hope someone can help me. I'm not completely ignorant when it comes to rooting and flashing custom roms, but it's been a while since the last time I did (last time was my Samsung Galaxy S2). Today I decided I was going to root my N5110 Note 8 and install a 4.4.2 rom on it.
I decided I was going to install the Omni Rom linked here: http://forum.xda-developers.com/showthread.php?t=2569099
I apologize in advance for the long descriptions below.
Here are the steps and issues in the order that it happened:
1) Flashed CF-Auto-Root-konawifi-konawifixx-gtn5110 using Odin (Auto Reboot, F. Reset Time)
2) Downloaded Rom Manager App, and booted into Recovery from there.
3) Using CWM Recovery, I followed instructions as described on the Omni link and did a Wipe/Factory Reset
4) Using CWM Recovery, I selected to install zip from SDCard, and selected the omni-4.4.2-20140102-n5110-HOMEMADE.zip
5) After a few seconds, I got an error 7, and the installation aborted.
6) Tried to reboot back to the system, but of course now that everything is wiped, it just loops back to recovery.
7) I tried installing the zip again, same error. I checked the thread and someone mentioned the same error. OP mentioned using TWRP, so I went back into Download mode and flashed TWRP via Odin
8) After reboot, it went into TWRP. Tried installing zip again, same error. I decided I'll pick up another rom to try first. So, I took out my microSD card so that I can load the ROM over to it.
9) Booted back into TWRP - it no longer sees my SD card. Tried to power down from recovery menus in hopes to get it to see the sd card. No luck
10) I'm desperate now--I am trying to force it off by holding down the power button. It reboots back into recovery. I even try to get it back to download mode so I can flash CWM back on, in hopes that it will let me retry. But now it just shows the battery screen (like when you're charging it while powered off) at empty. I unplug the USB cable, the screen turns off.
11) I try to power it back on without the USB cable plugged in, nothing happens.
12) I plug the USB power back in, and it looks like it's booting up. It goes to the Samsung Note 8.0 N5110 screen and just flickers. The flickering increases in speed over time.
13) I force it back into Download mode, and try to run the CF Auto-Root again (like I said I'm desperate now).
14) After Odin reboots the device, it goes into the battery screen and is doing the weird flickering thing again.
I'm currently attempting to download XXCMH3_stock-rooted-official.zip in hopes to flash via Odin, but the d/l keeps timing out before the whole thing can be transferred.
Someone, please help! What am I doing wrong?
Click to expand...
Click to collapse
Hi, just so you know... you do not need to root a stock ROM to flash a custom ROM... I am surprised that you think that is necessary
Did you ever set USB debugging to enabled?
Also what Odin do you have?
Turn off note, remove SD, and see if you can start in Stock download mode.
Flash with Odin 3.07... repeat flash with Odin 3.07 and use N5110UEFMI1_N5110XARFMI1_HOME.tar.md5 from http://samsungis.com/
Here is a copy of a reply on a thread it may help if you cannot perform the simple task of reflashing stock ROM from my small list of steps.
Harjan112 said:
Have you tried to flash with Re-Partition checked in Odin 3.07? It looks like your partions are messed up, if it was me I would just give it a try "flashing with re-partition checked" seeing as though its not working anyway.
If that don't work see if you can get a PIT file somewhere, I did read someone put up a link for a PIT file here http://forum.xda-developers.com/showthread.php?t=2544451 although I am NOT 100% sure if this is for the GT-N5110 but read thru it and if you feel adventurous give that PIT file a try.
And here is a link http://storagecow.eu/index.php?dir=Xda/Galaxy+Note+8/XXCMG2/ that someone put up with a leaked firmware and the PIT file and CODE file for the N5110 you can give that a try also.
- Unzip the file
- Open Odin 3.07 (already included in the firmware package)
- Restart phone in download mode
(Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add CODE_N5110XXCMG2_1031850_REV01_user_low_ship.tar to CODE
- Add CSC_OXA_N5110OXACMG2_1031850_REV01_user_mid_noship .tar to CSC
- Add kona_wifi.pit to PIT
- Make sure re-partition is ticked
- Start flash, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Home+ Power + Volume Up)
- Choose to wipe/factory reset.
(THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
Click to expand...
Click to collapse
GT-N5110 & GT-N5120 - 64GB 633x on board, Status Official on SafeRooted OEM ROMs with Wanam Xposed and RootCloak. The only way to fly 8+ hours!
This badboy don't play with Play & Triangle away!
In TWRP v2.6.3.0 look under mount and see if Micro Sdcard has an "x" if there is no "x" check this and go back to the screen where is says reboot ... reboot recovery from there, once rebooted in recovery go to install and in the top (if you are on v2.6.3.0) you should see storage, tap that and you should have a choice from internal storage and Micro SDcard, if you see Micro SDcard there you should select that and hit ok.
Hoping this helps.
Sent from my SPH-L900 using xda premium
My apologies. I didn't see any of the replies since my email subscription went to my spam folder.
Thank you for those of you who took the time to try and help me.
I know I didn't have to flash stock, but it was more of me being desperate and just trying to put ANY rom on to get it to turn on.
By some weird luck, I had got my tablet working the next day. Basically, in defeat, I just let it sit on the charger overnight thinking a full tank of gas would help it. The next morning, I seriously just pressed all the button combinations and managed to get it to go into recovery and see my SD. I tried yet again to install the Omni Rom again but no dice. It gave me an error again.
So I tried to install a rom again, this time the PAC-rom.
It worked!
Tablet is functional again!
So thank all of you and the electronics god for the miracle!
Have a great weekend you fine folks!

[Q] SGH-I747 won't boot past splash screen. Can I save my files?

My wife's SG3 SGH-I747 will show the white "Samsung" logo, then the white Samsung Galaxy S3 logo, then it goes black. Pulled the battery several times, no luck. I'm assuming this was caused by a failed update.
I can get it into download mode, I have cleared the Cache and rebooted with no luck.
I'm not a complete rookie at this, but I haven't done it for years and I'm afraid of losing the data on the phone.
How would you suggest I proceed to save the data? (Pictures and movies)
install a previous stock rom via the download mode? Or odin? I don't have a custom recovery installed.
Will the unbrick method work in my situation? If so will it wipe the phone?
I've searched the forum and can't find anyone saying if the data is salvageable.
I know it's my fault for not backing up her data, but she's in tears over losing pictures of the kids. Please help if you can.
Thanks,
Installing a ROM via Odin may require you to do a factory reset before it boots.
Boot into download mode and look at the screen. Do you see anything about a warranty bit?
I just get the download screen. (See attached picture) Nothing about a warranty
Options are:
Reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
Then it shows:
#MANUAL MODE#
--APPLLYING MULTI-CSC...
APPLIED THE CSC-CODE : ATT
SUCCESSFULLY APPLIED MULTI-csc.
.
That is the recovery mode, not download mode. To get into download, press the home button, volume down, and power button. Once the phone starts to boot, release the power button and hold the other two until you see the download message and press volume up to continue.
You were right. In download mode it says:
ODIN MODE
product name: sgh-i747
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
QUALCOMM SECUREBOOT: ENABLE
WARRANTY BIT: 1
BOOTLOADER AP SWREV: 3
DOWNLOADING....
DO NOT TURN OFF TARGET!!
Since the warranty bit is 1, this tells me you have at least a 4.3 bootloader on your phone.
The only thing I can think of to get the files would be to flash twrp onto your phone in download mode. Then mount the drive, connect the phone to your computer, and use Windows Explorer (assuming you're on a Win machine) to copy the files off the phone.
audit13 said:
Since the warranty bit is 1, this tells me you have at least a 4.3 bootloader on your phone.
The only thing I can think of to get the files would be to flash twrp onto your phone in download mode. Then mount the drive, connect the phone to your computer, and use Windows Explorer (assuming you're on a Win machine) to copy the files off the phone.
Click to expand...
Click to collapse
Flashing a new rom would wipe the phone?
The last full firmware AT&T released was 4.1.1. The AT&T 4.3 and 4.4.2 ROMs were only released as OTA updates for an existing stock ROM and stock recovery on a phone.
If you want to flash a 4.3 or 4.4.2 ROM, you need to use a version found on XDA to to this. Trying to flash a 4.3 ROM onto a 4.4.2 bootloader and modem could brick your phone. In fact, any flashing procedure can result in a brick or a loss of user data.
Even if you successfully flash a ROM, the ROM may not boot without wiping the cache and all user data first.
Good to know, Thanks a BUNCH for the help.
You are awesome!
Now...let's pray this works!
If you install a custom recovery, you can create a backup of the existing ROM even if the ROM doesn't boot.
Cool,
Odin 3.07 sees the phone, i downloaded openrecovery-twrp-2.6.3.0-d2att.tar. Is it is loaded through the pda option?
Thanks again for your help.
Yes, flash it via the PDA section. Do not check anything except F.Reset time.
Flash TWRP, when you see the word Reset in the status windows, remove the USB cable, remove the battery, replace the battery, boot into recovery, create a backup of the rom, preferably to an external SD card. When the backup is complete, attach phone to computer, mount the partitions, locate files on the phone you want to save.
Done with install, backing up to SD now.
Ok, TWRP worked, I was able to safe the files (THANK YOU!!!). I used the file manager to find and copy the files to the sd card, then did a full backup. It never did mount to the computer, even after the drivers were installed.
It saved the backup with the file name: 1970-01-01--00-18-57 KOT49H.I747UCUFNJ1 so I'm guessing that is the build number it was trying to update to (KOT49H.I747UCUFNJ1). I can get to recovery mode and download mode, how should I go about making this phone work again?
I'm not sure how to check what version of bootloader I have. You scared me about the "bricking it" warning about flashing the wrong rom with the wrong bootloader.
If your are sure you saved the necessary files in two different places, boot into recovery and wipe cache , dalvik, and reboot. If it still won't boot, wipe cache, dalvik, and data in recovery, reboot.
Another option may be to use adb to pull files from the phone, you can even pull entire directories. I will work from recovery mode. There are tutorials on installing the toolkit for adb w/o installing all of the platform development tools. I use Linux so I can not verify how to do this on Windows, but it looks as simple as it was for me. Once adb is present on the PC, boot the phone into recovery, and in a command prompt window enter the command
Code:
adb shell pull /path/to/picture/directory C:\path\to where\you\want\it
and example may be
Code:
adb shell pull /sdcard/DCIM/camera C:\recoveredphotos
Check that I did my Windows path correctly

... ... ...

... ... ...
Try this to at least get the phone booted:
1) download Odin 3.07 from here: https://www.google.ca/url?sa=t&rct=j...07763241,d.dmo
2) download the tar version of TWRP 2.8.7.0 from here: https://dl.twrp.me/d2att/
3) download the latest cm12.1 for the phone from here ( http://www.cmxlog.com/12.1/d2att/) and save it to a micro SD card;
4) download the version of cm12.1 gapps you want from here (https://wiki.cyanogenmod.org/w/Google_Apps) and save it to the same sd card where you saved CM12.1;
5) place the micro SD card into the phone;
6) boot the phone into download mode;
7) open Odin 3.07 and uncheck everything except f. reset time;
8) click on PDA and browse to the tar TWRP file and select it;
9) connect the phone and it should show up as a com port in Odin;
10) flash TWRP;
11) when you see the word RESET in the status window, remove the USB cable, remove the battery, replace the battery, use the button combination to get into recovery which should now be TWRP;
12) perform a full wipe of system, data, and cache;
13) flash CM12.1 and gapps from the micro SD card;
14) reboot;
15) use the Samsung Phone info app to determine the bootloader. Once you know the bootloader post, the result here as the bootloader determines what can and cannot be done to get it back to stock.
... ... ...
How did you get it booted?
Now that I know the phone has an mjb bootloader, Odin is failing because the 4.3 bootloader cannot be downgraded and the only stock rom available for the i747 is 4.1.
... ... ...
Okay. It's good to know that I was able to help.

ultimate note 5 rom

ive had help in rom section but unable to get the rom installed trying to install the ultimate note 5 rom ok i follow op instructions tried muti twrp and the lastest philz ever time i flash the rom i get a error 7 code tried muti formatted sd cards tried putting on phone storage then flashing still same error.. ive read on the error 7 a little bit about it look in the updater script dont see the line it says to erase,ive flash other rom no problem but this 1 keeps failing with that error the picture says twrp 2.8.6 did it just to try out but im on twrp 3.0 now when i got the phone it was already on 5.1.1 ok1
I will be as specific and give as much detail as i can here...
You need to start over with a clean slate. Use standard class 10 micro-sd card and don't mess with multi format whatever. Use TWRP 2.8.7 or 3.0.0. Start by rebooting into recovery and wiping everything clean several times. backup any files that you need to keep. But you must wipe internal sd, system, cache, data and dalvic-cache. wipe thenm in advanced wipe options of twrp. Next reboot to download mode. Launch odin 3.10.6 or newer on your pc. connect your phone to your pc via the usb cable. In the options tab of odin make sure auto-reboot and reset time is CHECKED!!! Open the official stock OK1 rom tar using the AP button in odin. Once the md5 check completes just press start to flash the stock rom. when it finishe LET THE PHONE REBOOT!!! Once the phone boots, setup as usual then go into Settings and open "Activate this device". Let it do it's thing and it will automatically reboot. Once the phone reboots, go to settings/System update and do the prl AND profile updates. Reboot your phone again. Then make sure your data and calls work as they should.
Once you are on stock and have done all of these steps above you are ready to odin TWRP. Download the tar version of TWRP to use in odin. It is the best way to flash recoveries. Launch odin on your pc and use the AP button to add the TWRP tar. In the options tab you can uncheck auto reboot if you want. (I've never had to do that but you can). Once it flashes you can let the phone reboot or you can just pull the battery then force reboot into recovery by holding the volume-up, home and power buttons until you feel the phone vibrate. Release all buttons and wait for TWRP to boot. Once in TWRP, do all of the wipes same as before multiple times. Then for good measure go to TWRP homescreen and press "Reboot" then "Recovery" and this will reboot recovery and ensure that the rom zip will flash with no trouble. Reboot recovery then flash the UN5 rom and remember to wait for data to conect before proceeding with setup wizard. Success. If this doesn't work then give up and leave your phone stock until you figure out what's causing your problems. Good luck.

Categories

Resources