Develop Bugs

CM 6.0.1 - Should I bother using a different kernel?

Keep the kernel that came with CyanogenMod 6.0.1 or use a different one, that is the question.
Please discuss below.

skrowl said:
Keep the kernel that came with CyanogenMod 6.0.1 or use a different one, that is the question.
Please discuss below.
Click to expand...
Click to collapse
I didn't know there was custom kernels for CM?
Please fill me in hell yeah

ACD168 said:
I didn't know there was custom kernels for CM?
Please fill me in hell yeah
Click to expand...
Click to collapse
He didn't mention custom, he said the one that came with it. I'm actually thinking the same question. Anyone?

ya... name one other one that works with CM6??????

ACD168 said:
ya... name one other one that works with CM6??????
Click to expand...
Click to collapse
If none of the other kernels work, I suppose that answers my question. I was under the impression that you could use any kernel with any rom.

skrowl said:
If none of the other kernels work, I suppose that answers my question. I was under the impression that you could use any kernel with any rom.
Click to expand...
Click to collapse
Nooooo. Most kernels will list ROMs they were tested on to determine compatibility and stability...
For instance, KingxKlick's kernels are specifically meant for 2.2 Sense ROMs, no others i.e. CM6...
I mean you can always try kernels I guess. I mean that's what nandroid is for, right

There is no other kernel that works with CM6.

jtcarnes said:
There is no other kernel that works with CM6.
Click to expand...
Click to collapse
Thank you.
I used to be able to run hydra kernels on CM for 2.1...

ACD168 said:
Thank you.
I used to be able to run hydra kernels on CM for 2.1...
Click to expand...
Click to collapse
yeah me too on the very early cm6 nighties.

[For Devs] android 4.1 jellybean

NOTE: DO NOT FLASH THIS TO YOUR PHONE> IT WILL HARD BRICK!
this is for any dev that wants to try and port android jellybean to the s3 Tmobile version. they already ported it to the internationl version so i think that might make it a little easier. here is the OP in the international section: http://forum.xda-developers.com/showthread.php?t=1737449

fcortes626 said:
NOTE: DO NOT FLASH THIS TO YOUR PHONE> IT WILL HARD BRICK!
this is for any dev that wants to try and port android jellybean to the s3 Tmobile version. they already ported it to the internationl version so i think that might make it a little easier. here is the OP in the international section: http://forum.xda-developers.com/showthread.php?t=1737449
Click to expand...
Click to collapse
Hmmm...
Wonder if we could take that ROM, change the updater-script to match our mounting points....then we just need a kernel....

Which we have one kernel already made. Not sure if it would work though.
If anyone would help set up a build environment that would work for our kernels and roms then I will gladly help and start learning.
Sent from my SGH-T999 using Tapatalk 2

brfield said:
Which we have one kernel already made. Not sure if it would work though.
If anyone would help set up a build environment that would work for our kernels and roms then I will gladly help and start learning.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
I think we'd need a stock CM9 based kernel though. If I understand correctly.

uoY_redruM said:
I think we'd need a stock CM9 based kernel though. If I understand correctly.
Click to expand...
Click to collapse
Well, it shouldn't take too long. It may be possible to build a CM9 Kernel for our phones using parts of the stock kernel that we have access to.

Once the JB source is released, an S3 port might actually be viable. Otherwise it's essentially just flashing a gnex image and praying something/anything works.

uoY_redruM said:
I think we'd need a stock CM9 based kernel though. If I understand correctly.
Click to expand...
Click to collapse
a CM9 kernel shouldn't be needed, just a modded kernel for our specific phone from what i believe.

We know this, but it's more of an experiment. Also, it helps work out anything we may need to do early on with the modules and drivers
Sent from my SGH-T999 using Tapatalk 2

Why not take this ROM, change the updater-script for our mount points, remove the flashing of the boot.img, flash ROM then flash the kernel Roman release?
Think that would work?

uoY_redruM said:
Why not take this ROM, change the updater-script for our mount points, remove the flashing of the boot.img, flash ROM then flash the kernel Roman release?
Think that would work?
Click to expand...
Click to collapse
It could, in theory. But we would need to work on the modules for anything to work. Could you post our mount points?

why does it have to be a cm9 kernel?

to be completely honest, as soon as we get a cm9 alpha, we will see some worth while stuff! but until then. TouchWiz it iz. We will have team kang's AOKP in no time im sure. i cant wait to see wuts to come. especially since this phone is at all the major carriers and they are all basically exactly the same! should be epic.

Radsolutionz said:
to be completely honest, as soon as we get a cm9 alpha, we will see some worth while stuff! but until then. TouchWiz it iz. We will have team kang's AOKP in no time im sure. i cant wait to see wuts to come. especially since this phone is at all the major carriers and they are all basically exactly the same! should be epic.
Click to expand...
Click to collapse
yea i think once one of the other major carriers (or ares) get cm9 then we will see some awesome stuff for everyones phone!
I think that the only thing that makes them different is the radios in the phone

uoY_redruM said:
Hmmm...
Wonder if we could take that ROM, change the updater-script to match our mounting points....then we just need a kernel....
Click to expand...
Click to collapse
uoY_redruM said:
I think we'd need a stock CM9 based kernel though. If I understand correctly.
Click to expand...
Click to collapse
uoY_redruM said:
Why not take this ROM, change the updater-script for our mount points, remove the flashing of the boot.img, flash ROM then flash the kernel Roman release?
Think that would work?
Click to expand...
Click to collapse
If aosp was that easy we would all be doing it but no... way more complex than that....
im on my phone. expect terrible typos.

howtomen said:
If aosp was that easy we would all be doing it but no... way more complex than that....
im on my phone. expect terrible typos.
Click to expand...
Click to collapse
Wishful thinking I suppose

in another note i found a mini tutorial on how to port it to other devices if anyone wants to try it here is the guide. it is an SDK port. note: i did not write this guide i am just posting a link to the authors op. you can thank him and/or donate to him. here isorum.xda-developers.com/showpost.php?p=28020178&postcount=36 the link:

fcortes626 said:
in another note i found a mini tutorial on how to port it to other devices if anyone wants to try it here is the guide. it is an SDK port. note: i did not write this guide i am just posting a link to the authors op. you can thank him and/or donate to him. here isorum.xda-developers.com/showpost.php?p=28020178&postcount=36 the link:
Click to expand...
Click to collapse
Link is broken, im not meaning to be a lazy pest.

sswb27 said:
Link is broken, im not meaning to be a lazy pest.
Click to expand...
Click to collapse
sorry about that :silly:
here you go: http://forum.xda-developers.com/showpost.php?p=28020178&postcount=36

fcortes626 said:
sorry about that :silly:
here you go: http://forum.xda-developers.com/showpost.php?p=28020178&postcount=36
Click to expand...
Click to collapse
i also have a deodexed system dump of jb if you want it let me know.

Source is out
Sent from my Galaxy Nexus using Tapatalk 2

4.3 ROMs?

What ROMs are okay to flash if you have the Knox bootloader. Im so confused about this Knox thing. Ive read if it doesnt change your bootloader you will be fine and others saying i have to wait for a stok mk3 .tar (i do believe thats the right one) file to be available. one dev posted a rooted 4.3 rom and he said this wont mess with the bootloader. im just nervous dont want to brick my phone. someone please help and shed some light on this confusing situation

This should be Q and A section, and Cnexus posted a FAQ about this in general section....
Sent from my SPH-L710 using Tapatalk

sorry about that
and i think i read what he posted but im still confused its such vague answers. idk why people cant just say yes or no. instead of elongating there answers. I just want to know if there are ROMs that i can flash while on the obKNOXious bootloader

StonerSteve420 said:
sorry about that
and i think i read what he posted but im still confused its such vague answers. idk why people cant just say yes or no. instead of elongating there answers. I just want to know if there are ROMs that i can flash while on the obKNOXious bootloader
Click to expand...
Click to collapse
I'm running the cm11/kitkat experimental build and I have the new knox bootloader, the rom requires some tweaking, I will post it soon if the original dev doesnt incorporate my fixes.

StonerSteve420 said:
sorry about that
and i think i read what he posted but im still confused its such vague answers. idk why people cant just say yes or no. instead of elongating there answers. I just want to know if there are ROMs that i can flash while on the obKNOXious bootloader
Click to expand...
Click to collapse
If you want a simple answer, then here it is: you can flash any rom you want.
Only one catch: do not EVER Odin a full stock tar with version < MK3 to your device or you will instantly brick.

PuffTheMagic said:
I'm running the cm11/kitkat experimental build and I have the new knox bootloader, the rom requires some tweaking, I will post it soon if the original dev doesnt incorporate my fixes.
Click to expand...
Click to collapse
i would be open to using that but CM11 has some problems not everything works. Im looking for a stable build. Camera video player etc all working idk im just lost with this knox thing man.

StonerSteve420 said:
i would be open to using that but CM11 has some problems not everything works. Im looking for a stable build. Camera video player etc all working idk im just lost with this knox thing man.
Click to expand...
Click to collapse
Whats not working in CM11 for you?

CNexus said:
If you want a simple answer, then here it is: you can flash any rom you want.
Only one catch: do not EVER Odin a full stock tar with version < MK3 to your device or you will instantly brick.
Click to expand...
Click to collapse
Thank you. First answer I've been able to understand. Just stay away from Odin and .tar files. About to flash your ROM so I can have root and from what I've been reading pretty good battery life as well. Thanks for your work man.

PuffTheMagic said:
Whats not working in CM11 for you?
Click to expand...
Click to collapse
last i read the camera may cause reboots and i do believe there was one other thing

StonerSteve420 said:
last i read the camera may cause reboots and i do believe there was one other thing
Click to expand...
Click to collapse
I've been running it with ART and I haven't had it reboot on me yet. I think once I was doing something with the camera gallery and the camera 'broke" and required a restart but I can't remember if that was when I was playing with cm10.2 or cm11.

PuffTheMagic said:
I've been running it with ART and I haven't had it reboot on me yet. I think once I was doing something with the camera gallery and the camera 'broke" and required a restart but I can't remember if that was when I was playing with cm10.2 or cm11.
Click to expand...
Click to collapse
well if this is the case than how did you get CM11 working? did you just download and flash from the OP if so can you share the link with me. And what is ART?

StonerSteve420 said:
well if this is the case than how did you get CM11 working? did you just download and flash from the OP if so can you share the link with me. And what is ART?
Click to expand...
Click to collapse
The original ROM checks for "know" baseband versions to make sure you dont try flashing the ROM on the wrong device. I had to unpack the ROM, add support for the new baseband and then repack the ROM inorder to get it to install. I also change he kernel cmdline to set SELinux to permissive mode by default (like it was in 4.3). I will post the tweaked ROM shortly.

PuffTheMagic said:
The original ROM checks for "know" baseband versions to make sure you dont try flashing the ROM on the wrong device. I had to unpack the ROM, add support for the new baseband and then repack the ROM inorder to get it to install. I also change he kernel cmdline to set SELinux to permissive mode by default (like it was in 4.3). I will post the tweaked ROM shortly.
Click to expand...
Click to collapse
please do i would much appreciate it. wouldnt mind trying out CM11 and 4.4 kitkat

StonerSteve420 said:
please do i would much appreciate it. wouldnt mind trying out CM11 and 4.4 kitkat
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showpost.php?p=47987693&postcount=875

Rom Kitkat for Galaxy Fame

Have long since emerged android 4.4.2 and no release for the Galaxy staff there Fame .. Help please! Some light on how to install an kitkat in Mobile?
Enviado de meu GT-S6810B usando Tapatalk

Laelson said:
Have long since emerged android 4.4.2 and no release for the Galaxy staff there Fame .. Help please! Some light on how to install an kitkat in Mobile?
Enviado de meu GT-S6810B usando Tapatalk
Click to expand...
Click to collapse
all of patch is going to samsung,another way is make a custom rom like @wulsic doing
about news Kitkat for another Samsung device is stuck on S3 (i think),cause the lastest news i read is ,new touchwhiz launcher cannot run correctly on S3 with 1 gb of ram,and we should patient cause when S3 is not have Kitkat ,and we too not have way ,cause we have 512 mb of ram
Note:
you can check the lastest firmware for fame on www.sammobile.com,and go to tab firmware

When kitkat was released there were leaks that showed that Fame might get the update because it was supposed to support mid/low -end devices, but as we can see there are no updates.. i'll never get another samsung phone again, it's just my second and it's the last.

davexd97 said:
When kitkat was released there were leaks that showed that Fame might get the update because it was supposed to support mid/low -end devices, but as we can see there are no updates.. i'll never get another samsung phone again, it's just my second and it's the last.
Click to expand...
Click to collapse
A guy there in forum CyanogenMod is working on CM10 and 11 "I am waiting for results. Believe we will soon have android 4.4.2 for kitkat Fame patience .. boy![emoji6]

Laelson said:
A guy there in forum CyanogenMod is working on CM10 and 11 "I am waiting for results. Believe we will soon have android 4.4.2 for kitkat Fame patience .. boy![emoji6]
Click to expand...
Click to collapse
Well that guy is me lol but uhh Laelson we have some progress. The Recovery is now 6.0.4.9 and it now has support to flash kitkat based roms.
https://drive.google.com/file/d/0B1u3mnq0nstfZnVSTDZpR0JKV2M/edit?usp=sharing
It still doesnt boot but its a kernel problem i believe that we need to fix it will take some time but yh so is life:angel:

wulsic said:
Well that guy is me lol but uhh Laelson we have some progress. The Recovery is now 6.0.4.9 and it now has support to flash kitkat based roms.
https://drive.google.com/file/d/0B1u3mnq0nstfZnVSTDZpR0JKV2M/edit?usp=sharing
It still doesnt boot but its a kernel problem i believe that we need to fix it will take some time but yh so is life:angel:
Click to expand...
Click to collapse
I will apply the new recovery, and as the kernel? can not use another model? or must be the fame, only modified?

Laelson said:
I will apply the new recovery, and as the kernel? can not use another model? or must be the fame, only modified?
Click to expand...
Click to collapse
Well i still need to make a good working kernel for the kitkat cm11 rom just be patient :angel: i also contacted somebody else who is working on almost the same thing as me but he is further so i asked for advice with the kernel since the source is also 4.1.2 or he also knows a bit wether which patches need to be applied cause it will be faster then that i need to find everything myself since i am not a real kernel dev xd.
But yeah you can try to flash it but yeah... Rom doesnt boot yet but i think before the summervacation it might boot, or yeah my summer vacation is started next week i thought or the week after idk

Here...
Laelson said:
Have long since emerged android 4.4.2 and no release for the Galaxy staff there Fame .. Help please! Some light on how to install an kitkat in Mobile?
Enviado de meu GT-S6810B usando Tapatalk
Click to expand...
Click to collapse
Use this url, is in Spanish but, easy to understand (video inside). Any trouble, i'll glad to help. Hope this helps.
galaxyfame.jimdo.com/rom-kitkat-pro-by-c-s/
Regards.

Farashto said:
Use this url, is in Spanish but, easy to understand (video inside). Any trouble, i'll glad to help. Hope this helps.
galaxyfame.jimdo.com/rom-kitkat-pro-by-c-s/
Regards.
Click to expand...
Click to collapse
that's a custom rom from stock ?????

Dunno
faizauthar12 said:
that's a custom rom from stock ?????
Click to expand...
Click to collapse
Really, i don't know. I'm new in all this and learning every day.

Farashto said:
Really, i don't know. I'm new in all this and learning every day.
Click to expand...
Click to collapse
Im not sure but i thought the guy in the video with that rom was using cwm 6.0.4.6 so... i thought that that version wasnt able to flash kitkat roms so yh.... I want to be 100% sure so im downloading itnow since guys with bad internet connection need to download hours to get the rom and i only around 3 minutes.
EDIT: Like i thought just 4.1.2 stock rom with kitkat theme a bit and edited settings to have more features and android version was 4.4.2 it said but in the fingerprint(Also for playstore neccesary) was 4.1.2)
The guy who made the rom has based it on the Latin stock rom 4.1.2(http://terafile.co/3395503ca6cc)

Farashto said:
Use this url, is in Spanish but, easy to understand (video inside). Any trouble, i'll glad to help. Hope this helps.
galaxyfame.jimdo.com/rom-kitkat-pro-by-c-s/
Regards.
Click to expand...
Click to collapse
I had installed the Deluxe C & S.. had a few mistakes but with GAPPS, could not be updated because they were modified .. then several applications not working (google+, hangouts, among others.) that these problems still there?

Kernel for cm11 ??

andris 934 said:
Kernel for cm11 ??
Click to expand...
Click to collapse
Im still busy with the kernel to make it good working to boot to cm11

And Kitkat is supposed to support low/mid - end devices? Probably Touchwiz but that explains how Google is able to release new versions of android and make them available as updates almost immediately on nexus devices. Im making a google kitkat experience rom but since no kitkat available for our device I have to use jelly bean as base. (Techno rom) Too complete it all I need is to change status bar and boot animation. And UI if possible because I'm new to making roms and this is my first. Any help is appreciated. :laugh:

please help me...
faizauthar12 said:
that's a custom rom from stock ?????
Click to expand...
Click to collapse
can i use s6810 rom in s6812 if not how can i use s6810 rom in s6812....

ayushchauhan said:
can i use s6810 rom in s6812 if not how can i use s6810 rom in s6812....
Click to expand...
Click to collapse
i think ,in this forum,you can find custom rom for S6812

Can anyone help me?

My device is M8t(China Mobile), I want to port both sense ROM and AOKP ROM to my device. Can anyone help me to make a AOKP boot.img.And fix the camera FC of the sense ROM.OR YOU CAN JUST TELL ME THE WAY!

hellobbn said:
My device is M8t(China Mobile), I want to port both sense ROM and AOKP ROM to my device. Can anyone help me to make a AOKP boot.img.And fix the camera FC of the sense ROM.OR YOU CAN JUST TELL ME THE WAY!
Click to expand...
Click to collapse
I'm not finding that models kernel source. Look here and see if you can find your device http://www.htcdev.com/devcenter/downloads/P00

task650 said:
I'm not finding that models kernel source. Look here and see if you can find your device http://www.htcdev.com/devcenter/downloads/P00
Click to expand...
Click to collapse
If no kernel source,no 3-part boot.img can be made? And can't the CM ROM be made?

@task650?

hellobbn said:
If no kernel source,no 3-part boot.img can be made? And can't the CM ROM be made?
Click to expand...
Click to collapse
I really am not sure. I haven't found much documentation on the variant that you have. I also have had much time to search. Not sure what you mean about a 3 part kernel either.

task650 said:
I really am not sure. I haven't found much documentation on the variant that you have. I also have had much time to search. Not sure what you mean about a 3 part kernel either.
Click to expand...
Click to collapse
3 part kernel means the kernel made my other developers not HTC

task650 can you make a AOKP kernel for M8t with M8T RUU?

hellobbn said:
task650 can you make a AOKP kernel for M8t with M8T RUU?
Click to expand...
Click to collapse
@task650

hellobbn said:
@task650
Click to expand...
Click to collapse
Not without kernel source. I wouldn't have the time to do that anyways. Too busy with everything else at the moment.

task650 said:
Not without kernel source. I wouldn't have the time to do that anyways. Too busy with everything else at the moment.
Click to expand...
Click to collapse
So would yoou please tell me the way?

task650 said:
Not without kernel source. I wouldn't have the time to do that anyways. Too busy with everything else at the moment.
Click to expand...
Click to collapse
And do you know what is fastboot boot?

@task650,what about TWRP RECOVERY?

hellobbn said:
And do you know what is fastboot boot?
Click to expand...
Click to collapse
Its command that's used to boot a kernel.

hellobbn said:
@task650,what about TWRP RECOVERY?
Click to expand...
Click to collapse
What about it? Its a recovery.

May be Now the kernel source of M8T is out .Would you please help me? @task650