Related
Hey guys,
I got a I747 I want to give to my mother as a gift.
I downgraded 4.1.2 to 4.1.1 and ran the secret menu unlock to unlock the sim card, that worked perfectly.
Now I want to update this out of 4.1.1 to 4.4.2 but I cannot find a stock firmware to run on odin anywhere.
Do I need to go to 4.3 first? Is there a stock firmware for that?
SamMobile stops at 4.1.2... OTA obviously doesn't work.
How Can I get this done..
Iz3man said:
Hey guys,
I got a I747 I want to give to my mother as a gift.
I downgraded 4.1.2 to 4.1.1 and ran the secret menu unlock to unlock the sim card, that worked perfectly.
Now I want to update this out of 4.1.1 to 4.4.2 but I cannot find a stock firmware to run on odin anywhere.
SamMobile stops at 4.1.2... OTA obviously doesn't work.
How Can I get this done..
Click to expand...
Click to collapse
You can just flash stock 4.1.2 firmware from sammobile and then run OTA updates.
I also found this on sammobile: Canada (Bell Mobile) (Black Edition), Version: Android 4.4.2, PDA: I747MVLUFNE6
CSC: I747MOYCFNE6, MODEM: I747MVLUFNE6
audit13 said:
You can just flash stock 4.1.2 firmware from sammobile and then run OTA updates.
I also found this on sammobile: Canada (Bell Mobile) (Black Edition), Version: Android 4.4.2, PDA: I747MVLUFNE6
CSC: I747MOYCFNE6, MODEM: I747MVLUFNE6
Click to expand...
Click to collapse
Will it work though.
I have it already on my pc, I updated my wife's with it.
If I update to 4.1.2 will OTA come? Even with the I747(not the I747m) on the Bell network?
Iz3man said:
Will it work though.
I have it already on my pc, I updated my wife's with it.
If I update to 4.1.2 will OTA come? Even with the I747(not the I747m) on the Bell network?
Click to expand...
Click to collapse
I have a Motorola Atrix from Bell. I flashed it with stock ATT firmware and received OTA updates from ATT over wi-fi.
Since you have the i747, start with stock pre-rooted ATT 4.1.1. This will flash the stock recovery, radio, and bootloader. Run triangle away, flash a stock unrooted ATT stock 4.1.1 ROM, and take the OTA updates.
http://forum.xda-developers.com/sho...mctr=(not provided)&__utmv=-&__utmk=135374642
audit13 said:
I have a Motorola Atrix from Bell. I flashed it with stock ATT firmware and received OTA updates from ATT over wi-fi.
Since you have the i747, start with stock pre-rooted ATT 4.1.1. This will flash the stock recovery, radio, and bootloader. Run triangle away, flash a stock unrooted ATT stock 4.1.1 ROM, and take the OTA updates.
http://forum.xda-developers.com/sho...mctr=(not provided)&__utmv=-&__utmk=135374642
Click to expand...
Click to collapse
Ok, so I guess it wasn't clear, my bad.
I have 4.1.1 stock firmware on my att 1747. It has never been rooted.
I run the Ota and I got an error, now it tells me "Your software is up to date".
Can I flash a bell i747m 4.4.2 image onto this i747 or will it brick?
Iz3man said:
Ok, so I guess it wasn't clear, my bad.
I have 4.1.1 stock firmware on my att 1747. It has never been rooted.
I run the Ota and I got an error, now it tells me "Your software is up to date".
Can I flash a bell i747m 4.4.2 image onto this i747 or will it brick?
Click to expand...
Click to collapse
You can flash i747m firmware on your phone but DO NOT flash the radios or bootloader from an i747m to an i747 and vice versa. Bricking is a really possibility if you do that.
Do you have a custom recovery? If you do, you will need to install a stock recovery.
Try resetting the phone (wiping cache, data) in recovery or through the ROM itself.
audit13 said:
You can flash i747m firmware on your phone but DO NOT flash the radios or bootloader from an i747m to an i747 and vice versa. Bricking is a really possibility if you do that.
Do you have a custom recovery? If you do, you will need to install a stock recovery.
Try resetting the phone (wiping cache, data) in recovery or through the ROM itself.
Click to expand...
Click to collapse
Alright, I have the stock recovery. How do I not flash the radio and boatloads when using the firmware from sammobile?
You cant. You cannot flash another devices firmware. Odin wont let it happen and if it did youd end up hard bricked due to mixed firmware. For example your sbl1, modemst and param partitions (plus others) would be i747 and youd be flashing sbl2, sbl3, rpm, etc from an I747M.
The only thing you could use are the system partition and kernel, nothing else. There are two ways to accomplish this, one is to build a rom from the firmware and flash that. The other is to flash with mobile odin, but that requires root and youd still have to be very careful.
Another priblem I see you encountering is you cannot run 4.4.2 without 4.3 or newer firmware. It will not boot otherwise.
You need to go to the General section and follow one of enewman17's tutorials to get to either 4.3 or 4.4.2. Personally, I dont see any other way you will be able to accomplish it.
audit13 said:
You can flash i747m firmware on your phone but DO NOT flash the radios or bootloader from an i747m to an i747 and vice versa. Bricking is a really possibility if you do that.
Do you have a custom recovery? If you do, you will need to install a stock recovery.
Try resetting the phone (wiping cache, data) in recovery or through the ROM itself.
Click to expand...
Click to collapse
Alright, based on Doc holiday, and others they say It cannot be done and from my experience I beleive them.
Thank you,
It's very difficult to do this when others are giving bad advice.
So for the record, cannot flash i747m firmware to i747.
Thanks!
The annoying part here is I can do it with my m7, I just flashed the Dev edition onto my Bell m7 with no problems.
All devices are different in many ways. What is perfectly safe to do with one brand or model can brick another.
And I wouldnt call it "bad" advice... I've seen audit13 and others helping lots of folks with very good advice. We all make mistakes and we all have more we can learn about these devices. No one knows everything about this stuff and shouldnt let that prevent them from trying to help.
Those who are trying to help are doing so with the best of intentions and tell people what they think could be the best way to solve a given problem. In cases like this one, its easy to see how anyone would think its ok to flash different firmware between similar models based on being able to do so on other devices they are familiar with. (If I had gone into those forums I wouldve been telling people the opposite and ended up being wrong there.)
All I can say is chalk it up as a new lesson on a different device, and I hope you still appreciate that someone was trying to help.
@audit13 I hope none of this discourages you from helping. Ive seen plenty of threads where your advice was sound and appreciated, and I am glad you have been around to help so many people out!
Now, back on the problem at hand... if you want to be running the latest 4.4.2 kk, you will have the option to use the OS (/system and kernel) from either the I747 or I747M firmware. But first you must fully update to a minimum of the 4.3 MJB firmware for the I747. Once you have this running for your base firmware/bootloader, you can then run the Bell or AT&T (4.3 or 4.4.2) system. (I hope this is making sense!)
So first, update the full 4.3, MJB, firmware via Odin. (Theres a thread in General with the file, ill post the link in a min).
If you want to update to 4.4.2 firmware, you can then follow enewman17's tutorial to do so via OTA.
You can then either stay with that, or use Mobile Odin to flash ONLY the system and kernel from the Bell firmware.
Let me know if any of that needs better clarification! Also let us know what your ultimate goal is. From the options you have, where do you want to end up?
---------- Post added at 10:32 AM ---------- Previous post was at 10:26 AM ----------
Ok, here are some links.
Stock MJB firmware (flash in Odin)
http://forum.xda-developers.com/showthread.php?t=2722660
enewman17's thread for updating to 4.4.2 (high success rate)
http://forum.xda-developers.com/showthread.php?t=2789917
Official, unmodified 4.4.2 OTA
http://forum.xda-developers.com/showthread.php?t=2788012
After updating with the 4.3 firmware, you can first try using the official ota to update. Then, if that fails you can go to enewman17's thread and try his method.
DocHoliday77 said:
All devices are different in many ways. What is perfectly safe to do with one brand or model can brick another.
And I wouldnt call it "bad" advice... I've seen audit13 and others helping lots of folks with very good advice. We all make mistakes and we all have more we can learn about these devices. No one knows everything about this stuff and shouldnt let that prevent them from trying to help.
Those who are trying to help are doing so with the best of intentions and tell people what they think could be the best way to solve a given problem. In cases like this one, its easy to see how anyone would think its ok to flash different firmware between similar models based on being able to do so on other devices they are familiar with. (If I had gone into those forums I wouldve been telling people the opposite and ended up being wrong there.)
All I can say is chalk it up as a new lesson on a different device, and I hope you still appreciate that someone was trying to help.
@audit13 I hope none of this discourages you from helping. Ive seen plenty of threads where your advice was sound and appreciated, and I am glad you have been around to help so many people out! ]
:thumbup::beer::sly:
err on the side of kindness
Click to expand...
Click to collapse
i have rooted and unlocked galaxy s3(i don't know if it is t999 or i747)the imei and boatloader are for t999 and the android build is i747mvldlk4 4.1.1 official rom and i want to flash new rom but i don't know what i have to flash (t999 roms or i747)please help me....
What does it day in download mode? What about the baseband/modem version?
Best way to know for sure is to install terminal emulator and enter this:
getprop ro.bootloader
You may simply have a T999 running on an I747 based rom. The two are very compatible when it comes to custom roms.
Since it sounds like you are on pretty old firmware, you will probably need to fully update it before flashing a newer rom. Just remember to only flash firmware for your model device. So if it's a T999 do not flash I747 firmware. Once updated you can then flash custom roms from either device.
(Also check the sticker under the battery to see what model it says)
baseband:t999uvdmd5 and modem board is msm8260a
What about the bootloader?
boatloader:t999uvdmd5
And just for good measure, check the sticker under the battery.
You are currently running on T999 base firmware with an I747 based rom, so you can be pretty certain you've got a T999 model.
You'll want to flash one of the two latest firmwares for the T999. (NC2 or OH1 if I'm remembering correctly) (note that some roms may not flash on the newest OH1 firmware if they have been updated recently, so you may want to go with NC2 to make things a little easier for now.)
After flashing your firmware, flash a custom recovery and then from the recovery flash your choice of rom.
Hope that helps and good luck!
thanks so much for help....but i want to ask about the files which i need to download when i flash nc2 firmware please(do i need to download any files for modem and kernel or this files are downloaded automatially with the firmware file??
When you are dealing with firmware, it includes everything, unless otherwise stated. Download and unzip the firmware package. Then flash the .tar.md5 file with Odin. Back up data first of course, just in case.
Doing this will give you a fully updated, stock, unrooted device. Reroot using Towel root, or flash recovery then a rom if you choose.
If you haven't already, I suggest reading the first few posts of my firmware thread (sticky in dev section). There's already a lot explained there.
does flashing t999uvuenc2 relock my mobile network..and if that will happens what can i do to unlock without code
Once the phone has been unlocked via code or the free method, the phone should remain unlocked after flashing ROMs.
Yup, the unlock is permanent. You can safely flash firmware, roms, etc.
ihave flashed cm12.1 d2tmo on my t999.but the features of camera like full HD video recording and face detecting were lost..can I restore them on this rom
Hello,
Trying to install the custom ROM cyanogen mod 11.
http://forum.xda-developers.com/showthread.php?t=2682905
First time I ever attempt to flash a custom rom.
In the guide it asks to DL Bootloader & Modem. My baseband is:
I747MVLUFOB3
I can't find any baseband corresponding to this one.
Here I found a firmware that correspond to my base band.
http://www.sammobile.com/firmwares/database/SGH-I747M/
Not sure if it is useful...
Any way to install the custom room??
Cheers
Just a nickname said:
Hello,
Trying to install the custom ROM cyanogen mod 11.
http://forum.xda-developers.com/showthread.php?t=2682905
First time I ever attempt to flash a custom rom.
In the guide it asks to DL Bootloader & Modem. My baseband is:
I747MVLUFOB3
I can't find any baseband corresponding to this one.
Here I found a firmware that correspond to my base band.
http://www.sammobile.com/firmwares/database/SGH-I747M/
Not sure if it is useful...
Any way to install the custom room??
Cheers
Click to expand...
Click to collapse
Which variant of the galaxy s3 do you have? You should be able to flash any ROM compatible with your phone using TWRP or Phil touch recovery.
I have the i747m (rogers canada). I have TWRP 2.8.7.0 & rooted with Kingo root. Somehow it was the only way to root it. Tried Towel root & odin but both were doing nothing.
TWRP was installed a long time ago. I recently made an update on kies (what a mistake sign...). I was on 4.4.2 before and after the firmware update on kies.
I got a spare S3 motherboard (with cpu etc.) I might try on that one first but I need to disassemble & assemble everything... not very tempting.
I usually just use odin and http://www.sammobile.com/firmwares/ to start fresh and root again when I want to upgrade bootloader and modems.
As you saw at sammobile, OB3 is the latest official release for the i747. You do not need to do anything to your baseband (modem) to run CM11. You may want to verify that your bootloader (firmware) matches the modem. This can be done from within TWRP. Go to the advanced menu and in the terminal enter
Code:
getprop ro.bootloader
You should get a return ending in OB3.
I suspect the CM 11 updater-script has not been updated to account for the just released OB3 firmware. If that is the case, you could always edit the script in the roms zip file.
@dawgdoc
When I entered the command, it returned me:
I747MVLUFOB3
Secondly, I have not tried to install CM11 (or the newer version CM12?). I do not know if it works. I just want to make sure I can flash and not brick my phone.
My phone is not the d2att (i747), it is d2can (i747m). I believe these two are very similar but enough different to cause problem.
So, can I install CM11 or 12?
You are talking about changing a zip file... The newb I am know how to do that, but what exactly - that he doesn't know. So I would rather not mess with that. I guess TWRP checks if the firmware of the bootloader / modem matches to those from a compatible list and simply updating that list would allow me to install the build?
I was thinking about this ROM:
http://forum.xda-developers.com/galaxy-s3-att/development/unofficial-cyanogenmod-12-t2968854
Don't know the exact difference with the CM12 but it says d2can.
However, the BaNkS GAPPS - GAPPS link does not work... I don't know what that is.
Just a nickname said:
@dawgdoc
When I entered the command, it returned me:
I747MVLUFOB3
Secondly, I have not tried to install CM11 (or the newer version CM12?). I do not know if it works. I just want to make sure I can flash and not brick my phone.
My phone is not the d2att (i747), it is d2can (i747m). I believe these two are very similar but enough different to cause problem.
So, can I install CM11 or 12?
You are talking about changing a zip file... The newb I am know how to do that, but what exactly - that he doesn't know. So I would rather not mess with that. I guess TWRP checks if the firmware of the bootloader / modem matches to those from a compatible list and simply updating that list would allow me to install the build?
I was thinking about this ROM:
http://forum.xda-developers.com/galaxy-s3-att/development/unofficial-cyanogenmod-12-t2968854
Don't know the exact difference with the CM12 but it says d2can.
However, the BaNkS GAPPS - GAPPS link does not work... I don't know what that is.
Click to expand...
Click to collapse
The unofficial CM12 -5.1.1 by @matrixzone is good for the i747M, aka d2can. If you have any doubts, ask on that thread if it is updated to run on OB3? Matrixzone is active on the forums and should respond to your question. Also I just checked the updater-script for the latest CM11 official nightly and it is set up to run on the i747M.
So, either should run with no problems for you.
What is the bootloader and modem version needed and how do I get them without getting a locked bootloader? I'm on i747M with 4.1.1 Stock rom with DLK4 modem and bootloader. There are newer bootloaders and modems that can be flashed through recovery but some people have been getting bricks when messing with bootloader.
THey say to use Official firmwares to have it update the bootloaders but which one is the proper firmware version to get the proper bootloader and modem version to allow DATA 4g LTE after flashing CM12.1 Lollipop rom?
Chupacabra117 said:
What is the bootloader and modem version needed and how do I get them without getting a locked bootloader? I'm on i747M with 4.1.1 Stock rom with DLK4 modem and bootloader. There are newer bootloaders and modems that can be flashed through recovery but some people have been getting bricks when messing with bootloader.
THey say to use Official firmwares to have it update the bootloaders but which one is the proper firmware version to get the proper bootloader and modem version to allow DATA 4g LTE after flashing CM12.1 Lollipop rom?
Click to expand...
Click to collapse
I see audit13 is helping you in the other thread, therefore I will not confuse things and also reply here.
dawgdoc said:
I see audit13 is helping you in the other thread, therefore I will not confuse things and also reply here.
Click to expand...
Click to collapse
But the newest firmware is bad because it has evil bootloader.
Chupacabra117 said:
But the newest firmware is bad because it has evil bootloader.
Click to expand...
Click to collapse
Check my long post over there.
good afternoon, I have a Galaxy S3 SGH-I747 Model using ClockworkMod install the [ROM] [4.4.4] SlimKat d2att (at & t) Stable 9.0 and [Gapps] [4.4.x] Official Slim GApps TRDS (Slimkat) and now not recognize me the sim card. i bought this phone in amazon for use it here in Madrid. i dont know if is a Modem issue. I appreciate all the help you can give me. Thank you. (sorry for my english)
Does your sim card have a pin code that you enter each time you boot the phone? If yes, does the phone ask for the pin before unlocking the sim? What bootloader and modem are currently on the phone? Did the phone work before installing a custom ROM?
@audit13 , mine said "no service available" after moving from KK to lolli and i flashed a "write to extsdcard fix zip" and it fixed the issue , i.e. can now make and recieve calls. dont know if is same issue (or why exactly that fixed mine) but i have a KK "write to extsdcard fix.zip" if you think it would help.
"err on the side of kindness"
audit13 said:
Does your sim card have a pin code that you enter each time you boot the phone? If yes, does the phone ask for the pin before unlocking the sim? What bootloader and modem are currently on the phone? Did the phone work before installing a custom ROM?
Click to expand...
Click to collapse
Thank you, audit13, my Sim card have a pin code, but doesn't ask for the pin, and yes, the phone work well before installing the custom rom. Where can I look the bootloader and modem?.
you can download the "samsung info app" from here http://forum.xda-developers.com/showthread.php?t=2609045
and it will tell you bootloader and modem.
(p.s. as always audit13 , not trying to butt-in ; just trying to help out/save you a step )
"err on the side of kindness"
Hey I have sgh-i747m canadian on stock jb . I flashed to CM 12.1 and my phone doesn't recognize sim. That means I can make calls and receive but no mobile data. Please help me
Sent from my SAMSUNG-SGH-I747 using XDA-Developers mobile app
For the i747, sounds to me like the bootloader and modem are too old for the rom.
For theni747m, is the phone running the latest bootloader and modem?
@mrrocketdog, I've never heard about that zip until your helpful post. I must keep that in mind for the future even though I haven't had an s3 for quite a while.
audit13 said:
Does your sim card have a pin code that you enter each time you boot the phone? If yes, does the phone ask for the pin before unlocking the sim? What bootloader and modem are currently on the phone? Did the phone work before installing a custom ROM?
Click to expand...
Click to collapse
Ok, use the app that mrrocketdog ,so nicely share to us, and the bootloader is I747UCDLK3 and the módem is MSM8960. Something call my atention, the kernel is 3.4.104-cyanogenmod-g38a4g52 [email protected] #1 32-bit. I hope this information can help. Thank you
mrrocketdog said:
@audit13 , mine said "no service available" after moving from KK to lolli and i flashed a "write to extsdcard fix zip" and it fixed the issue , i.e. can now make and recieve calls. dont know if is same issue (or why exactly that fixed mine) but i have a KK "write to extsdcard fix.zip" if you think it would help.
HI, where can I find that zip to see if fix my problem. Thanks in advance.
Click to expand...
Click to collapse
The problem is the bootloader and modem. They need to be updated to work with the latest ROMs.
If the phone is sim unlocked, I recommend flashing back a stock rom using Odin and the firmware from sammobile, set up the phone, run ota updates until the phone is running the latest bootloader and modem. This is tedious and takes the most time but it is the safest method in my opinion.
If you don't want to go this route, just flash the latest modem and bootloader using twrp, flash the custom rom, flash gapps.
@Budare , here is the thread to upgrade bootloaders and modem if you decide on this route rather than flashing back to stock and running ota updates as @audit13 suggested , which IS the safest route. (always always always a certain % of risk ; no matter how small , to flash anything. not trying to scare you , just being honest)
http://forum.xda-developers.com/showthread.php?t=2808654
p.s. you might want to think about changing to twrp recovery as cwm has not been updated in quite a long time.
p.s.s. here's the latest twrp DL page for sghi747 att
https://dl.twrp.me/d2att/
"err on the side of kindness"
audit13 said:
The problem is the bootloader and modem. They need to be updated to work with the latest ROMs.
If the phone is sim unlocked, I recommend flashing back a stock rom using Odin and the firmware from sammobile, set up the phone, run ota updates until the phone is running the latest bootloader and modem. This is tedious and takes the most time but it is the safest method in my opinion.
If you don't want to go this route, just flash the latest modem and bootloader using twrp, flash the custom rom, flash gapps.
Click to expand...
Click to collapse
thank you audit13, but how i run ota updates??
To run ota updates, you need to use Odin to flash the stock att 4.1.1 rom using Odin. After setting up the phone, check for software update under the phone settings.
audit13 said:
To run ota updates, you need to use Odin to flash the stock att 4.1.1 rom using Odin. After setting up the phone, check for software update under the phone settings.
Click to expand...
Click to collapse
i dont know if is because im in Madrid, but the phone doesnt get updates, thats why i want to use another rom. what can i do?
Not sure but I have received OTA updates even when the phone is not in the phone's original country. The OTA updates came over wifi.
If you want to use another ROM, you can install TWRP, boot into TWRP, flash bootloader, flash modem, flash custom ROM, flash gapps. If flashing the modem bootloader in TWRP, DO NOT reboot the phone in between flashing this files and make sure the bootloader and modem version are made for each other.
I have a Canadian Galaxy S3, on 4.1.1 DLK4 Official. I rooted it, and have TWRP.
I want to upgrade my rom to a CM12/13 but of course with root and custom recovery, OTA updates are blocked.
I need newer bootloaders and modem to run the newer android versions.
Should I install them now, while on 4.1.1, and then flash CM12, or should I sequentially update each of the AT&T firmwares until I get up to 4.4.2?
Do official roms have the bootloaders and modems in them and install them automatically?
Should I use the Kies restore method?
The Canadian and att s3 phones are not the same model number. Don't flash an att bootloader to your Canadian phone as this may brick the phone.
Flash latest stock rom from Sammobile.com, flash twrp, flash cm.
audit13 said:
The Canadian and att s3 phones are not the same model number. Don't flash an att bootloader to your Canadian phone as this may brick the phone.
Flash latest stock rom from Sammobile.com, flash twrp, flash cm.
Click to expand...
Click to collapse
Okay, but i can use AT&T roms tho?
The i747m will work with d2can, d2lte, and d2att Roms.
Is it safe to flash straight from 4.1.1 to 4.4.2 using a sammobile rom? will i brick due to Knox bootloader and modem?
Can I flash it using TWRP?
If someone could link a tutorial that would be very helpful.
I keep reading stuff that says to flash the newer bootloader before flashing a 4.3 firmware, and some that say the opposite. Others say that people should incrementally update.
I want to go from 4.1.1 original with Root and TWRP, to CM13.
Thank you.
Yes, you can flash the latest stock 4.4.2 rom from Sammobile.com directly to your phone. No need to do anything other than backing up your data.
audit13 said:
Yes, you can flash the latest stock 4.4.2 rom from Sammobile.com directly to your phone. No need to do anything other than backing up your data.
Click to expand...
Click to collapse
Thank you!
Now I just need to get the balls again to use odin. Flashing the custom recovery using the Universal Tool Kit that had step by step walkthrough was adrenaline rush enough LOL.
I could also use Kies, as that has 4.4.2 OB3 (telus), and also has "emergency firmware recovery" feature if a brick ever happens. Though ideally the only time boot.img gets flashed is only with Full Stock Firmware files.
I find kies to be unreliable when I have tried to restore firmware so I always stuck with Odin.