M8 Bricked while updating to Marshmallow. - One (M8) Q&A, Help & Troubleshooting

Hi,
The other day i've tried to update my M8 to marshmallow via OTA and my device get bricked . . .
It is stucked on Android Recovery, and have tried everything. Ruu's, factory reset . . . everything. Ruu always gives me back error 155.
Don't know what else to do. It is new, but I think the people that sold it to me have changed things like CID and it have S-OFF.
I'll post the "fastboot getvar all" command results:
E:\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei: ---------------------
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Can someone help me? :crying: Thanks!

I am having the same problem!! I installed the official update via the system update, installed then at the end it told me there is a problem with the OTA thing and that is it. Since then my device is bricked and I'm in between the recovery menu and the bootloader.
I don't wanna root my device and didn't try it. This sucks. I wish I can rollback this mess to Lollipop.

Moe88Saber said:
I am having the same problem!! I installed the official update via the system update, installed then at the end it told me there is a problem with the OTA thing and that is it. Since then my device is bricked and I'm in between the recovery menu and the bootloader.
I don't wanna root my device and didn't try it. This sucks. I wish I can rollback this mess to Lollipop.
Click to expand...
Click to collapse
I had a similar issue, bricked my HTC ONE M8 by updating through OTA.
But I got it fixed by flashing RUU through htc_fastboot.exe, it took a while but was effective.
In your case, if you need to find your right CID, first get your mid number and check if you can find a right CID to your MID, then write it through fastboot. Hope it can help you.
If you will need a detailed how to, let me know

azbtaurus said:
I had a similar issue, bricked my HTC ONE M8 by updating through OTA.
But I got it fixed by flashing RUU through htc_fastboot.exe, it took a while but was effective.
In your case, if you need to find your right CID, first get your mid number and check if you can find a right CID to your MID, then write it through fastboot. Hope it can help you.
If you will need a detailed how to, let me know
Click to expand...
Click to collapse
My CID is 11111111, it says so in the bootloader. Can you provide links on where to get the RUU and the flashing app? Thanks
The bootloader says LOCKED yet my device is the international variant. Is it related or does it mean that my bootloader is locked?

ramajo17 said:
Hi,
The other day i've tried to update my M8 to marshmallow via OTA and my device get bricked . . .
It is stucked on Android Recovery, and have tried everything. Ruu's, factory reset . . . everything. Ruu always gives me back error 155.
Don't know what else to do. It is new, but I think the people that sold it to me have changed things like CID and it have S-OFF.
I'll post the "fastboot getvar all" command results:
E:\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA44WWM07312
(bootloader) imei: ---------------------
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Can someone help me? :crying: Thanks!
Click to expand...
Click to collapse
Hey, I've made a simple research and found that your serial number belongs to HTC ONE M8 Taiwan version, so first you need to change your MID to 0P6B150 (optional but strongly advised for applaying offical updates) and then the CID to CHT__601 (Taiwan).
Only after this you need to find the right RUU and flash it, or use RUU.zip and flash it through htc_fastboot.exe
Hope it will be helpfull
---------- Post added at 09:52 AM ---------- Previous post was at 09:48 AM ----------
Moe88Saber said:
My CID is 11111111, it says so in the bootloader. Can you provide links on where to get the RUU and the flashing app? Thanks
The bootloader says LOCKED yet my device is the international variant. Is it related or does it mean that my bootloader is locked?
Click to expand...
Click to collapse
Send me your detailed phone information as it was shown in the first post of the thread so I can tell you how to change you CID and other identification numbers that in the end will let you apply the update
Having the original CID is very important, cuz your bootloader was relocked? otherwise they could've not changed you CID/
Check your serial information go to HTC Warranty Check - Lookup
this tell you right region information of your phone so you can easily find right CID and MID numbers of your phone

azbtaurus said:
Send me your detailed phone information
Click to expand...
Click to collapse
Can you walk me through it? When I connect my device to my laptop, it shows nothing. the HTC sync app fails to detect my phone as well.
But my bootloader detects it. It goes from FASTBOOT to FASTBOOT USB

azbtaurus said:
Hey, I've made a simple research and found that your serial number belongs to HTC ONE M8 Taiwan version, so first you need to change your MID to 0P6B150 (optional but strongly advised for applaying offical updates) and then the CID to CHT__601 (Taiwan).
Click to expand...
Click to collapse
That is wrong .. you need to see the CID/MID not the serial no.
He can flash the 6.12.401.4 RUU zip
---------- Post added at 01:40 PM ---------- Previous post was at 01:35 PM ----------
ramajo17 said:
Hi,
The other day i've tried to update my M8 to marshmallow via OTA and my device get bricked . . .
It is stucked on Android Recovery, and have tried everything. Ruu's, factory reset . . . everything. Ruu always gives me back error 155.
Don't know what else to do. It is new, but I think the people that sold it to me have changed things like CID and it have S-OFF.
I'll post the "fastboot getvar all" command results:
E:\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei: ---------------------
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Can someone help me? :crying: Thanks!
Click to expand...
Click to collapse
1. - remove the serial no. in your above post.
2. - Is the bootloader LOCKED or RELOCKED ? If it is UNLOCKED, relock it with command fastboot oem lock
3. - follow this : http://forum.xda-developers.com/showpost.php?p=64926362&postcount=4 for the driver part
and this : http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6 for the RUU part

Moe88Saber said:
Can you walk me through it? When I connect my device to my laptop, it shows nothing. the HTC sync app fails to detect my phone as well.
But my bootloader detects it. It goes from FASTBOOT to FASTBOOT USB
Click to expand...
Click to collapse
1 - see the links in the end of #7 post? Go there and first get the drivers and adb-fastboot tools
once you get try command fastboot getvar all this will show you the detailed information of your device
2 - once done get HTC ONE M8 all in one tool kit, it would be easier for you to use instead typing commands all the time
3 - unlock your bootloader by following the instructions on the program listed above
4 - search for right CID number of your phone and write it by using command fastboot oem writecid (YOUR CID)
5 - relock bootloader
6 - flash the right RUU (check if it is right for your original new CID)
Keep in mind that I've done this on my own devices, and I don't take any responsibility in case if you get your device bricked

ckpv5 said:
That is wrong .. you need to see the CID/MID not the serial no.
He can flash the 6.12.401.4 RUU zip
---------- Post added at 01:40 PM ---------- Previous post was at 01:35 PM ----------
1. - remove the serial no. in your above post.
2. - Is the bootloader LOCKED or RELOCKED ? If it is UNLOCKED, relock it with command fastboot oem lock
3. - follow this : http://forum.xda-developers.com/showpost.php?p=64926362&postcount=4 for the driver part
and this : http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6 for the RUU part
Click to expand...
Click to collapse
I'm not the OP but I am experiencing the same issue. anyway...my bootloader is locked and it is connected to the ADB, getvar shows me some stats. I'm now downloading the RUU and will flash it afterwards. Thanks for your help.

Moe88Saber said:
I'm not the OP but I am experiencing the same issue. anyway...my bootloader is locked and it is connected to the ADB, getvar shows me some stats. I'm now downloading the RUU and will flash it afterwards. Thanks for your help.
Click to expand...
Click to collapse
You cannot simply flash the RUU .. the first question is .. is the RUU the right one for your device ?
You have SUperCID as you mentioned above .. what about the MID ?
Is it 0P6B10000 ? If yes .. then go ahead

ckpv5 said:
You cannot simply flash the RUU .. the first question is .. is the RUU the right one for your device ?
You have SUperCID as you mentioned above .. what about the MID ?
Is it 0P6B10000 ? If yes .. then go ahead
Click to expand...
Click to collapse
Sir, If you mean the modelid, then yes, it is 0P6B10000 and cidnum is 11111111
Should I go ahead?

Moe88Saber said:
Sir, If you mean the modelid, then yes, it is 0P6B10000 and cidnum is 11111111
Should I go ahead?
Click to expand...
Click to collapse
Yes.. sure

ckpv5 said:
That is wrong .. you need to see the CID/MID not the serial no.
He can flash the 6.12.401.4 RUU zip
---------- Post added at 01:40 PM ---------- Previous post was at 01:35 PM ----------
1. - remove the serial no. in your above post.
2. - Is the bootloader LOCKED or RELOCKED ? If it is UNLOCKED, relock it with command fastboot oem lock
3. - follow this : http://forum.xda-developers.com/showpost.php?p=64926362&postcount=4 for the driver part
and this : http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6 for the RUU part
Click to expand...
Click to collapse
Ok I'm downloading the RUU. I've tried to apply this RUU from computer but not worked, I hope it works with fastboot!
I'll tell you once is done, thanks!
Update info:
It gets stuck in "sending 'zip'... <53965 KB>
I've waited 20 minutes and nothing happens.

ckpv5 said:
yes.. Sure
Click to expand...
Click to collapse
yes!!! It lives! You are one magnificent human being! I am forever in your debt!:d:d
thank you thank you thank you

ramajo17 said:
Ok I'm downloading the RUU. I've tried to apply this RUU from computer but not worked, I hope it works with fastboot!
I'll tell you once is done, thanks!
Update info:
It gets stuck in "sending 'zip'... <53965 KB>
I've waited 20 minutes and nothing happens.
Click to expand...
Click to collapse
Have you install the fastboot/adb that linked above ?
Have you updated the HTC USB drivers, also linked above ?
Try with a Windows PC USB2.0

ckpv5 said:
Have you install the fastboot/adb that linked above ?
Have you updated the HTC USB drivers, also linked above ?
Try with a Windows PC USB2.0
Click to expand...
Click to collapse
Yes both things. I'll try to download the RUU again because when I try to unzip it on my PC it says that the file is corrupted.
Can be that the problem?

ramajo17 said:
Yes both things. I'll try to download the RUU again because when I try to unzip it on my PC it says that the file is corrupted.
Can be that the problem?
Click to expand...
Click to collapse
You can't extract/unzip an encrypted HTC RUU zip.
You never reply to my first question .. is your bootloader LOCKED, RELOCKED or UNLOCKED ?
If it is UNLOCKED .. I can suggest another method .. restore a TWRP backup.
If you have installed both adb/fastboot and latest HTC USB driver (and uninstall HTC Sync Manager) I don't see a reason why it cannot work for you when it worked for the other guy (post #14)
Do you have a microSD card ? You can do it different way.

ckpv5 said:
You can't extract/unzip an encrypted HTC RUU zip.
You never reply to my first question .. is your bootloader LOCKED, RELOCKED or UNLOCKED ?
If it is UNLOCKED .. I can suggest another method .. restore a TWRP backup.
If you have installed both adb/fastboot and latest HTC USB driver (and uninstall HTC Sync Manager) I don't see a reason why it cannot work for you when it worked for the other guy (post #14)
Do you have a microSD card ? You can do it different way.
Click to expand...
Click to collapse
Sorry, it is RELOCKED.
I'll try to do all from 0 again. If it does not work we can UNLOCK it and try the TWRP method you say?
Yes I do have an SD card in my phone, but my PC doesn't detect it and have no SD adapter. I've heard that there's some fastboot command "push" or something like that to put the RUU on it but don't know how it works.
Thanks for your time, I'm desperate. . .

You need to unlock bootloader to go with TWRP method.
Just try again ... with a Windows PC with USB2.0 (many people report USB3.0 is a hit and miss)
Make sure the HTC Sync manager is uninstalled after you install the driver.

ckpv5 said:
You need to unlock bootloader to go with TWRP method.
Just try again ... with a Windows PC with USB2.0 (many people report USB3.0 is a hit and miss)
Make sure the HTC Sync manager is uninstalled after you install the driver.
Click to expand...
Click to collapse
Can't believe it was de USB . . . Now is doing things, let's see
Update:
IT IS ALIVE!! The problem was de USB . . I was using the official one but didn't work.
Really big thanks!!

Related

[Q] HTC One m8 fingerprint update error

Helllo there!
I'm making a new thread because I couldn't find anyone with the exact same problem and don't want to brick my phone or such.
Now to the problem: every time I try to update my HTC one m8 (Europe) it stops when installling and tells me this:
Code:
Finding update package...
Opening update package...
Verifying update package...
Installing update...
L50QCT.01.101.007
Package expects build fingerprint of htc/htc_europe/htc_m8:4.4.4/KTU84P/389838.9:user/release-keys
or htc/htc_europe/htc_m8:5.0.1/LRX22C/448934.10:user/release-keys;
this device has htc/htc_europe/htc_m8:4.4.4/KTU84P/389838.6:user/release-keys.
Installation aborted.
Write host_mode 0 done
getvar all:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.9
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
The phone is rooted, the bootloader unlocked, it has the stock recovery, it's s-on and it says "software status: modified".
The only thing I can see in the error is that this nine:
Code:
htc/htc_europe/htc_m8:4.4.4/KTU84P/389838.[B][U]9[/U][/B]:user/release-keys
is a six
Code:
htc/htc_europe/htc_m8:4.4.4/KTU84P/389838.[B][U]6[/U][/B]:user/release-keys
on mine.
I am pretty new here still, so i don't know how to fix it, and i don't want to break it.
Best regards
Schmix
Root phone
vinayluck said:
Root phone
Click to expand...
Click to collapse
What are you trying to say?
Schmix said:
What are you trying to say?
Click to expand...
Click to collapse
You should post your getvar all (deleting your imei number and S./N ) there is a post here but it is in german with the same problem which points to an incorrect recovery!
http://www.android-hilfe.de/wiederh...ge-expects-build-fingerprint-fingerprint.html
Shepps
vinayluck said:
Root phone
Click to expand...
Click to collapse
Being rooted or not has no bearing on OTA update.
Also, it seems that you are trying to tell the OP to root (not completely clear, with the 2 word post), when he clearly states he is already rooted.
Getvar info added!
By the way, the other guy had a different problem.
Has anyone got an idea of whats wrong?
Schmix said:
Helllo there!
I'm making a new thread because I couldn't find anyone with the exact same problem and don't want to brick my phone or such.
Now to the problem: every time I try to update my HTC one m8 (Europe) it stops when installling and tells me this:
Code:
Finding update package...
Opening update package...
Verifying update package...
Installing update...
L50QCT.01.101.007
Package expects build fingerprint of htc/htc_europe/htc_m8:4.4.4/KTU84P/389838.9:user/release-keys
or htc/htc_europe/htc_m8:5.0.1/LRX22C/448934.10:user/release-keys;
this device has htc/htc_europe/htc_m8:4.4.4/KTU84P/389838.6:user/release-keys.
Installation aborted.
Write host_mode 0 done
getvar all:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.9
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
The phone is rooted, the bootloader unlocked, it has the stock recovery, it's s-on and it says "software status: modified".
The only thing I can see in the error is that this nine:
Code:
htc/htc_europe/htc_m8:4.4.4/KTU84P/389838.[B][U]9[/U][/B]:user/release-keys
is a six
Code:
htc/htc_europe/htc_m8:4.4.4/KTU84P/389838.[B][U]6[/U][/B]:user/release-keys
on mine.
I am pretty new here still, so i don't know how to fix it, and i don't want to break it.
Best regards
Schmix
Click to expand...
Click to collapse
Download and run the 3.28.401.10 RUU first (a quick search here and you'll find it), then run this one.
Schmix said:
Getvar info added!
By the way, the other guy had a different problem.
Has anyone got an idea of whats wrong?
Click to expand...
Click to collapse
Wrong stock recovery image.
OTA needs stock recovery 3.28.401.9 (389838.9) or 4.16.401.10 (448934.10)
but you installed 3.28.401.6 (389838.6)
Get the right recovery image, OTA will proceed.
I have one here - 3.28.401.9_recovery.img : http://sourceforge.net/projects/htconem8/files/Recovery/3.28.401.9_recovery.img/download
ckpv5 said:
Wrong stock recovery image.
OTA needs stock recovery 3.28.401.9 (389838.9) or 4.16.401.10 (448934.10)
but you installed 3.28.401.6 (389838.6)
Get the right recovery image, OTA will proceed.
I have one here - 3.28.401.9_recovery.img : http://sourceforge.net/projects/htconem8/files/Recovery/3.28.401.9_recovery.img/download
Click to expand...
Click to collapse
Okay thank you so far!
But now it comes up with a different error; It says "/system/xbin/nc has unexpected contents".
Let me tell you the whole story:
Some time ago i installed busybox, xposed and xprivacy (and luckypatcher) and used it normaly.
Then the Lollipop update came around and since it wasnt working (giving out the unexpected contend error) i thought it would be a good idea to just do a factory reset.
It didnt work afterwards either, so i went here to ask what the problem was, and i was told it was because of xposed.
However, xposed wasn't installed anymore (the app), and (i think) the newer versions installed it somewhere else, so installing and then uninstalling (the button in the app) it didnt delete the old directory. (Btw. in an last attempt i tried installing the stick recovery and got the wrong one apparently)
So yeah, i have no idea on how to fix this problem, but i would be okay with having to reset my phone.
Schmix said:
But now it comes up with a different error; It says "/system/xbin/nc has unexpected contents".
So yeah, i have no idea on how to fix this problem, but i would be okay with having to reset my phone.
Click to expand...
Click to collapse
That's expected
There are a few methods to solve your problem.
The easiest one is RUU it back to stock.
Follow this thread : http://forum.xda-developers.com/showthread.php?t=2735235
You need to relock bootloader and also make a backup of your internal storage files/pic/music or whatever you like to keep.
The RUU will update your device to the latest
ckpv5 said:
That's expected
There are a few methods to solve your problem.
The easiest one is RUU it back to stock.
Follow this thread : http://forum.xda-developers.com/showthread.php?t=2735235
You need to relock bootloader and also make a backup of your internal storage files/pic/music or whatever you like to keep.
The RUU will update your device to the latest
Click to expand...
Click to collapse
But i don't have S-Off... is that a problem?
And are the files correct?
Schmix said:
But i don't have S-Off... is that a problem?
And are the files correct?
Click to expand...
Click to collapse
You don't have S-Off - that's why you need to relock bootloader
That's the only difference - read the thread thoroughly.
First step - relock bootloader with command fastboot oem lock
then follow the step 3 onwards
Also note you need to use htc_fastboot.exe not the usual fastboot.exe
Anything you need to ask, you can ask there. I believe @EddyOS will gladly help you
ckpv5 said:
You don't have S-Off - that's why you need to relock bootloader
That's the only difference - read the thread thoroughly.
First step - relock bootloader with command fastboot oem lock
then follow the step 3 onwards
Also note you need to use htc_fastboot.exe not the usual fastboot.exe
Anything you need to ask, you can ask there. I believe @EddyOS will gladly help you
Click to expand...
Click to collapse
Keep meaning to add a few bits that can be done with S-ON, been super busy of late!
ckpv5 said:
You don't have S-Off - that's why you need to relock bootloader
That's the only difference - read the thread thoroughly.
First step - relock bootloader with command fastboot oem lock
then follow the step 3 onwards
Also note you need to use htc_fastboot.exe not the usual fastboot.exe
Anything you need to ask, you can ask there. I believe @EddyOS will gladly help you
Click to expand...
Click to collapse
Thank you very much, I got it to work now!
Have a good day!
ckpv5 said:
Wrong stock recovery image.
OTA needs stock recovery 3.28.401.9 (389838.9) or 4.16.401.10 (448934.10)
but you installed 3.28.401.6 (389838.6)
Get the right recovery image, OTA will proceed.
I have one here - 3.28.401.9_recovery.img : http://sourceforge.net/projects/htconem8/files/Recovery/3.28.401.9_recovery.img/download
Click to expand...
Click to collapse
I have the same issue with my htc desire 820n can you help me pleas
ammarhigh said:
I have the same issue with my htc desire 820n can you help me pleas
Click to expand...
Click to collapse
I believe you do know this is M8 thread and not HTC Desire 820n
But .. this is what you can do to fix your problem ...
Check for OTA as usual, download OTA then select install later.
Connect your device to PC then copy the OTA zip from internal storage\download folder to PC
Open the OTA zip with 7-zip, you'll see firmware.zip. Open firmware.zip and extract out recovery.img <--- this is the one that you need.
Boot your device to bootloader
Fastboot flash this extracted recovery.img
Reboot, check for OTA again, this time select install now
Done
I'm sorry for posting here but i did it and it's not working when i'm flashing the recovery i tooked it from the OTA it's give me error when flashing it the update is lollipop and i'm on kitkat 4.4.4
Sent from my HTC Desire 820 using XDA Free mobile app

HTC M8S VODA firmware

Somebody can link me a Vodafone UK firmware zip, I have to flash it in RUU mode in order to make my phone working again.
Thank you in advance
Check post #1 and ask here : http://forum.xda-developers.com/htc-one-m8/one-m8s-general/make-custom-recovery-htc-one-m8s-t3114245
I can't help much as I don't have a M8s
ckpv5 said:
Check post #1 and ask here : http://forum.xda-developers.com/htc-one-m8/one-m8s-general/make-custom-recovery-htc-one-m8s-t3114245
I can't help much as I don't have a M8s
Click to expand...
Click to collapse
Yeah, checked multiple times, but I didn't find any proper files according to my problem. I mean , I've got the RUU files there, but I have to flash through ruu only the firmware zip because I've relocked the bootloader, and since I have wrong recovery flashed (simple M8 recovery) can't do anything else. I think this is the only solution.
Btw thanks for replying.
I don't get it ...
If there is RUU for your device version, use the RUU to fix the problem.
You don't need firmware.zip when there is RUU available (when you install the same version as your current firmware written on bootloader)
ckpv5 said:
I don't get it ...
If there is RUU for your device version, use the RUU to fix the problem.
You don't need firmware.zip when there is RUU available (when you install the same version as your current firmware written on bootloader)
Click to expand...
Click to collapse
I need the firmware cause the RUU for my HTC doesn't works, it starts flashing the file but shuts down with an error ... Sorry for not mentioning that . Flashing the firmware I think the only solution for me :/
Hi GombaFelho,
I had the same problem, always the wrong firmware error message.
I unlocked and did again an "oem lock". Check again the drivers for RUU.
In end it worked for me with the ARUWizard.exe and this version:
RUU_M8_QL_UL_L50_SENSE60_Vodafone_UK_1.11.161.1_Radio_1.0.U20410.1G50408_15.00_016_F_release_430447_signed
First there is a downgrade and after that you can uprade the software on the fly.
realclone1000 said:
Hi GombaFelho,
I had the same problem, always the wrong firmware error message.
I unlocked and did again an "oem lock". Check again the drivers for RUU.
In end it worked for me with the ARUWizard.exe and this version:
RUU_M8_QL_UL_L50_SENSE60_Vodafone_UK_1.11.161.1_Radio_1.0.U20410.1G50408_15.00_016_F_release_430447_signed
First there is a downgrade and after that you can uprade the software on the fly.
Click to expand...
Click to collapse
Hi ! Thanks for the answer
I tried that one too, but some magical way my update stuck at 0/8 so idk what should I do ..
I've read somewhere a solution for this, but can't remembere where
When you have that stuck problem, that's pc usb connection problem not RUU.
You need latest htc usb drivers and use usb2.0
Read this : http://forum.xda-developers.com/showpost.php?p=64926362&postcount=4
ckpv5 said:
When you have that stuck problem, that's pc usb connection problem not RUU.
You need latest htc usb drivers and use usb2.0
Read this : http://forum.xda-developers.com/showpost.php?p=64926362&postcount=4
Click to expand...
Click to collapse
Tried it now, says the bootloader verison not correct... im really unlucky
Back to basic ... most important data in order to get help.
Post your fastboot getvar all result (remove serial & imei no.)
ckpv5 said:
Back to basic ... most important data in order to get help.
Post your fastboot getvar all result (remove serial & imei no.)
Click to expand...
Click to collapse
Okay, as soon as I can get my phone load up . Thanks for your patience and sorry for my idiotism..
EDIT : so here are the results
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.21.161.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8ql_ul
(bootloader) platform: hTCBmsm8939
(bootloader) modelid: 0PKV10000
(bootloader) cidnum: VODAP102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 7900fbfd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) mfg-name: 0001
Unfortunately neither firmware nor RUU available on the net for this version.
When you said you wait for it to load up .. are you saying your device is in working condition, only wrong recovery installed ?
ckpv5 said:
Unfortunately neither firmware nor RUU available on the net for this version.
When you said you wait for it to load up .. are you saying your device is in working condition, only wrong recovery installed ?
Click to expand...
Click to collapse
I shouldn't wait for anything , right ? I mean it's not that new phone, so I assume there aren't going to be a new firmware for this version...
It was in a working condition, but after I relocked the bootloader, it went off. Had to start with the Pow+Vol.Up+Vol.Down combo, it worked but now just stops at the HTC ONE screen...
Anyways I really appreciate that you took the time to help me
I was wondering if there is some way to unlock the bootloader without using the HTCDev ? (cause I can't factory reset my phone) that would be so good...
I have an M8s too, and had the same issue.
To fix this. First try to relock and unlock the your bootloader it will prompt yes or no bla bla... Tick yes
If none of this work. Install the latest recovery from lalleman's server and pick a custom ROM, I recommend CM12 since you don't a choice cause Pandora is a little buggy.
This should work for you. Good luck with that

Htc M8, confused, want to update to marshamallow

Hello I bought M8 from somebody, it is unbranded European model i think, phone is rooted and carrier unlocked as im using it in asia. it comes with android 5.0.1, I want to update to stock marshmallow for this variant. I have been trying to do on my own but it only confused me more. Im not sure if i have custom rom or if because im rooted, because At the time moment it doesnt offer any software updates from the main menu.
Some info abt phone.
Its model id at back is Op6B100,
Android version 5.0.1
Software number 4.18.708.12
Build number 4.18.708.12
In the bootloader menu I have
Software status: Official
Locked ( i think it means bootloader)
M8_UL PVt SHIp s-off
Cid-11111111 (but if I check with cidgetter it says t-mob010). So it confused me because according to its model its supposed to be european model but in fastboot it says 11111111.
HBoot 3.19.0.0000
I dont have twrp installed.
So please tell me where to go from here. I want to either from here go direct to stock android 6 for this M8 variant or go back to stock condition and get ota update. I prefer to lose the root. So please tell me which stock firmware I need, and do I need to change cid, remove root, before that? Also i would like not to brick my device in process.. Thanks.
Also my device is carrier unlocked at the moment so Im hoping this shouldn't affect that. Thanks
.??
Post fastboot getvar all result (delete serial & imei no. before posting) then someone will be able to help.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.708.12
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B13000 ( on the back its 0P6B100)
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
I would like to install htc marshmallow update, kindly tell me how I can do that.
First you need to change MID to EU
Then install EU marshmallow RUU
Follow this guide - https://forum.xda-developers.com/showpost.php?p=70575580&postcount=12
Do i need twrp to change MId? And do I need to unlock bootloader before flashing RUU.
Kashi88 said:
Do i need twrp to change MId?
Click to expand...
Click to collapse
Yes as said in the guide unless you're running a rooted ROM.
Kashi88 said:
And do I need to unlock bootloader before flashing RUU.
Click to expand...
Click to collapse
No
ckpv5 said:
Yes as said in the guide unless you're running a rooted ROM.
No
Click to expand...
Click to collapse
ok thanks , I keep getting this error in the adb fastboot when flashing ruu zip . target reported max download size ( shows some big number bytes) .
Read the guide again .. you need htc_fastboot not normal fastboot.
At the end of the guide it shows 2 other methods on how to install RUU zip. Pick one thar you think it is easier for you.
ckpv5 said:
Read the guide again .. you need htc_fastboot not normal fastboot.
At the end of the guide it shows 2 other methods on how to install RUU zip. Pick one thar you think it is easier for you.
Click to expand...
Click to collapse
thank you so much i installed it with the micro sd method, and everything worked out smooth. just one last question, if in future i have to reset my phone from settings menu or from bootloader menu (volume down key), will I go back to android lollypop version or remain on this 6.0. thanks again
remain on this 6.0
ckpv5 said:
remain on this 6.0
Click to expand...
Click to collapse
hi..i am suffering from black bootloader issue..cant see any option..is there any solution?
dr.estiack said:
hi..i am suffering from black bootloader issue..cant see any option..is there any solution?
Click to expand...
Click to collapse
Please don't post the same question to multiple threads. It clutters up the forum, and makes it confusing for those trying to help you. Your post is also not related to the topic of this particular thread.

HTC M8s Stuck between Bootloader and Stock Recovery

I wonder I anyone can point me in a right direction ?
After Factory Reset phone went into White HTC Screen and stopped. I'm only able to access Bootloader and Stock Recovery now. There is no OS.
OS.1.21.401.1
HTC___001
HBOOT 3.19.0.0000
S-ON
LOCKED
Software Status: Official
I tried to Unlock bootloader. I used Hasoon's tool. I confirmed YES to unload bootloader. But after restart Bootloader is still locked.
I tried to flash boot.img and recovery.img but all FAILS.
I can access the phone via ADB but anything flashing always fails. Tried sideload via ADB in Phone's recovery. But always Fails.
I can't access SD via Recovery, says E: mount fail. Tried to re-format the SD but no result
To me it seems like bootloader is corrupt and seems that without proper hardware I won't be able to do anything...
I spen many hours now and about to give up. Please let me know if I missed anything before I will, sadly, have to try professionals.
Many thanks to everyone.
Vash
panagath said:
Hello, thanks for the reply. What I see are the following:
LOCKED
HBOOT - 3.19.0.0000
RADIO-1.29.214500021.12G
OpenDSP-v51.2.2-00593-M8974_F0.1015
OS-6.12.61.4
Click to expand...
Click to collapse
Did you find solution/fix pls ?
I seem to have similar problem.
After Factory Reset phone went into White HTC Screen and stopped. I'm only able to access Bootloader and Stock Recovery now. There is no OS.
OS.1.21.401.1
HTC___001
HBOOT 3.19.0.0000
S-ON
LOCKED
Software Status: Official
I tried to Unlock bootloader. I used Hasoon's tool. I confirmed YES to unload bootloader. But after restart Bootloader is still locked.
I tried to flash boot.img and recovery.img but all FAILS.
I can access the phone via ADB but anything flashing always fails. Tried sideload via ADB in Phone's recovery. But always Fails.
I can't access SD via Recovery, says E: mount fail. Tried to re-format the SD but no result
To me it seems like bootloader is corrupt and seems that without proper hardware I won't be able to do anything...
I spent many hours now and about to give up. Please let me know if I missed anything before I will, sadly, have to try professionals.
Vash
vagon1 said:
Did you find solution/fix pls ?
I seem to have similar problem.
After Factory Reset phone went into White HTC Screen and stopped. I'm only able to access Bootloader and Stock Recovery now. There is no OS.
OS.1.21.401.1
HTC___001
HBOOT 3.19.0.0000
S-ON
LOCKED
Software Status: Official
I tried to Unlock bootloader. I used Hasoon's tool. I confirmed YES to unload bootloader. But after restart Bootloader is still locked.
I tried to flash boot.img and recovery.img but all FAILS.
I can access the phone via ADB but anything flashing always fails. Tried sideload via ADB in Phone's recovery. But always Fails.
I can't access SD via Recovery, says E: mount fail. Tried to re-format the SD but no result
To me it seems like bootloader is corrupt and seems that without proper hardware I won't be able to do anything...
I spent many hours now and about to give up. Please let me know if I missed anything before I will, sadly, have to try professionals.
Vash
Click to expand...
Click to collapse
Your device is not regular M8, it's htc M8s.
You can try to RUU - https://forum.xda-developers.com/showpost.php?p=70306458&postcount=2
Anything ask here not in M8 section - https://forum.xda-developers.com/htc-one-m8/one-m8s-general
---------- Post added at 05:24 PM ---------- Previous post was at 05:21 PM ----------
panagath said:
Hello, thanks for the reply. What I see are the following:
LOCKED
HBOOT - 3.19.0.0000
RADIO-1.29.214500021.12G
OpenDSP-v51.2.2-00593-M8974_F0.1015
OS-6.12.61.4
Click to expand...
Click to collapse
I can't remember whether there is RUU for your device. I'll check later tonight.
For the time being, try to install stock 6.12.61.4 firmware and see whether this helps or not.
https://forum.xda-developers.com/showpost.php?p=60218734&postcount=5
ckpv5 said:
Your device is not regular M8, it's htc M8s.
You can try to RUU - https://forum.xda-developers.com/showpost.php?p=70306458&postcount=2
Anything ask here not in M8 section - https://forum.xda-developers.com/htc-one-m8/one-m8s-general
---------- Post added at 05:24 PM ---------- Previous post was at 05:21 PM ----------
I can't remember whether there is RUU for your device. I'll check later tonight.
For the time being, try to install stock 6.12.61.4 firmware and see whether this helps or not.
https://forum.xda-developers.com/showpost.php?p=60218734&postcount=5
Click to expand...
Click to collapse
That's interesting ! I will give it a go this evening. Did not think it could be M8s. Thank you !
Vash
---------- Post added at 10:57 AM ---------- Previous post was at 10:56 AM ----------
panagath said:
Hey, thanks for the reply. I haven't managed to do anything neither did I spend a lot of time on this. I was waiting in case someone could help. Such a shame if the phone is bricked. I do not know if it is worth taking to professionals as its value as a used phone is quite low at the moment...
Click to expand...
Click to collapse
Yes you are right. The only way is to keep trying with these phones, until you succeed
---------- Post added at 11:30 AM ---------- Previous post was at 10:57 AM ----------
ckpv5 said:
Your device is not regular M8, it's htc M8s.
You can try to RUU - https://forum.xda-developers.com/showpost.php?p=70306458&postcount=2
Anything ask here not in M8 section - https://forum.xda-developers.com/htc-one-m8/one-m8s-general
---------- Post added at 05:24 PM ---------- Previous post was at 05:21 PM
Click to expand...
Click to collapse
How can you say that it is M8s and not M8 please ? I had a problem with another M8 before, seems it could be for the very same reason (could be M8s afterall)
Thank you
Vash
vagon1 said:
How can you say that it is M8s and not M8 please ? I had a problem with another M8 before, seems it could be for the very same reason (could be M8s afterall)
Thank you
Vash
Click to expand...
Click to collapse
Based on the OS no. that you wrote. Regular M8 doesn't have that version, only M8s does.
To really confirm, write here all the details that you see on bootloder because your current one is incomplete.
Better if you give result of fastboot getvar all (without serial & imei no.), this will be truly complete details.
update
ckpv5 said:
Based on the OS no. that you wrote. Regular M8 doesn't have that version, only M8s does.
To really confirm, write here all the details that you see on bootloder because your current one is incomplete.
Better if you give result of fastboot getvar all (without serial & imei no.), this will be truly complete details.
Click to expand...
Click to collapse
Hi Matey
Update. Downloaded the file, placed to SD card and rebooted to bootloader. Update started ok, but soon message popped up : Device halted due to Large Image update fail!
Device rebooted, but now it's blinking orange led but can't start it or anything. Will keep it on charger until tomorrow and see if I can start it again.
My Getvar bellow :
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.21.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT554YS01064
(bootloader) imei: 358031060751297
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8ql_ul
(bootloader) platform: hTCBmsm8939
(bootloader) modelid: 0PKV10000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 7900fbfd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) mfg-name: 0001
all: Done!
The attachment below is from someone else, for illustration purposes only. As did not manage to take a photo of mine. But message looks exactly the same..
vagon1 said:
Hi Matey
Update. Downloaded the file, placed to SD card and rebooted to bootloader. Update started ok, but soon message popped up : Device halted due to Large Image update fail!
Device rebooted, but now it's blinking orange led but can't start it or anything. Will keep it on charger until tomorrow and see if I can start it again.
My Getvar bellow :
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.21.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT554YS01064
(bootloader) imei: 358031060751297
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8ql_ul
(bootloader) platform: hTCBmsm8939
(bootloader) modelid: 0PKV10000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 7900fbfd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) mfg-name: 0001
all: Done!
The attachment below is from someone else, for illustration purposes only. As did not manage to take a photo of mine. But message looks exactly the same..
Click to expand...
Click to collapse
Seems I managed to brick my M8s. After failed updated and device restart it wont turn back on. Only orange LED is repeatedly flashing when plugged to the charger or PC. PC detects that something is connected by doesn't recognize it. Wont respond to any ADB commands. I also tried VOL UP/DOWN + POWER BUTTONS for 5minutes a number of times, but nothing.
I had similar problem with HTC One Mini 2, had to take phone apart and disconnect the battery for a few minutes. Phone started OK and worked fine after this. But really don't want to take this M8s apart to disconnect the battery. As it's not mine.
Don't know if to keep the phone on charger, or let it rather disconnected and discharge.. ??
Any help would be much appreciated.
Vash
vagon1 said:
My Getvar bellow :
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-main: 1.21.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m8ql_ul
(bootloader) platform: hTCBmsm8939
(bootloader) modelid: 0PKV10000
(bootloader) cidnum: HTC__001
The attachment below is from someone else, for illustration purposes only. As did not manage to take a photo of mine. But message looks exactly the same..
Click to expand...
Click to collapse
First to answer your earlier question how to know whether your device is M8 or M8s.
As you can see in your getvar result, the product is m8ql_ul which belongs to M8s. M8 is m8_ul for GSM version.
Now your thread already been moved to M8s section. Hoefully someone familiar with M8s can assist here.
I can only assist on general term and idea.
With your getvar result, now we know you have a Lollipop. The RUU is for Marshmallow. To install a Marshmallow RUU (for the case of M8), you need first to install Marshmallow firmware then only can install Marshmallow RUU. That's explained the Large image failure. Unfortunately I don't know whether anyone post any firmware only for 2.10.401.1 so you can install the RUU after.
Getting this Large image failure doesn't brick a device. With S-On it's either the RUU is successfully installed or failed. And usually will only be successfully installed when the problem is firmware & software related. When a hardware problem like corrupted emmc, RUU won't be able to fix it.
As you used Hansoon toolkit earlier which is meant for M8 not M8s, not sure whether that have any effect on your device hardware.
Let's see whether anyone with M8s has any knowledge on how to fix your problem.
ckpv5 said:
First to answer your earlier question how to know whether your device is M8 or M8s.
As you can see in your getvar result, the product is m8ql_ul which belongs to M8s. M8 is m8_ul for GSM version.
Now your thread already been moved to M8s section. Hoefully someone familiar with M8s can assist here.
I can only assist on general term and idea.
With your getvar result, now we know you have a Lollipop. The RUU is for Marshmallow. To install a Marshmallow RUU (for the case of M8), you need first to install Marshmallow firmware then only can install Marshmallow RUU. That's explained the Large image failure. Unfortunately I don't know whether anyone post any firmware only for 2.10.401.1 so you can install the RUU after.
Getting this Large image failure doesn't brick a device. With S-On it's either the RUU is successfully installed or failed. And usually will only be successfully installed when the problem is firmware & software related. When a hardware problem like corrupted emmc, RUU won't be able to fix it.
As you used Hansoon toolkit earlier which is meant for M8 not M8s, not sure whether that have any effect on your device hardware.
Let's see whether anyone with M8s has any knowledge on how to fix your problem.
Click to expand...
Click to collapse
Thank you for the reply, yes there are some seriously valid points. I'm still hoping I'll be able to ressurect the phone. But before I had One Mini 2 with exactly same symptoms and had to take the phone apart, disconnect the battery and when put all back together phone worked again. But really want to avoid doing this... I'll give it a couple of days playing with buttons and charger and if phone doesn't start I will take it apart and do the battery trick.
Once working again will load a Lollipop on it and hopefully phone will work. If emmc is buggered then I think the phone is done...
Will keep everyone posted about results..
Again thank you very much
Vash

Hi guys anybody can help me ? My Htc one m8 has been bricked i can't flash stock ruu

Hi guys anybody can help me ? My Htc one m8 has been bricked i can't flash stock ruu please help me
this are my fastboot getvar all value :
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.24_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.709.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: *****
(bootloader) imei: ******
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: HTC__621
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.008s
so my bootlader is locked with security warning and software status : modified
Which RUU did your try (version number, file name)? And what does that mean you "can't flash stock ruu"? Did you get any error messages, what point did it fail, etc.?
You also need to tell us how it is "bricked"? Were you trying to flash something, or update, etc.? Or just happened on its own (failed to boot to OS)?
Did you do any mods to the phone, or is it (as far as you know) stock? For that matter, did you get the phone used?
redpoint73 said:
Which RUU did your try (version number, file name)? And what does that mean you "can't flash stock ruu"? Did you get any error messages, what point did it fail, etc.?
You also need to tell us how it is "bricked"? Were you trying to flash something, or update, etc.? Or just happened on its own (failed to boot to OS)?
Did you do any mods to the phone, or is it (as far as you know) stock? For that matter, did you get the phone used?
Click to expand...
Click to collapse
When i flash RUU faced with "remote : 12 signautre verify fail" and this is a RUU that i flashed : HTC One M8 6.20.709.2 sense 8
redpoint73 said:
Which RUU did your try (version number, file name)? And what does that mean you "can't flash stock ruu"? Did you get any error messages, what point did it fail, etc.?
You also need to tell us how it is "bricked"? Were you trying to flash something, or update, etc.? Or just happened on its own (failed to boot to OS)?
Did you do any mods to the phone, or is it (as far as you know) stock? For that matter, did you get the phone used?
Click to expand...
Click to collapse
when i unplugged the phone from charger this problem occurred i didn't flash any RUU later and my phone is unrooted .
mamali0067 said:
when i unplugged the phone from charger this problem occurred .
Click to expand...
Click to collapse
I assume when you say "bricked" it means you can't boot to Android OS, but you can get to bootloader (otherwise, you wouldn't have been able to do fastboot getvar).
On the bootloader screen, does it say LOCKED or UNLOCKED near the top?
Also, I recommend you delete IMEI and serial number from your top post. These are personal info, and should not be posted online (and also, not needed to help or advise you).
---------- Post added at 09:09 AM ---------- Previous post was at 09:09 AM ----------
mamali0067 said:
When i flash RUU faced with "remote : 12 signautre verify fail" and this is a RUU that i flashed : HTC One M8 6.20.709.2 sense 8
Click to expand...
Click to collapse
To confirm, the file actually says "RUU" in the file name, and about 1.5 GB in size?
redpoint73 said:
I assume when you say "bricked" it means you can't boot to Android OS, but you can get to bootloader (otherwise, you wouldn't have been able to do fastboot getvar).
On the bootloader screen, does it say LOCKED or UNLOCKED near the top?
Also, I recommend you delete IMEI and serial number from your top post. These are personal info, and should not be posted online (and also, not needed to help or advise you).
---------- Post added at 09:09 AM ---------- Previous post was at 09:09 AM ----------
To confirm, the file actually says "RUU" in the file name, and about 1.5 GB in size?
Click to expand...
Click to collapse
yes of course it's about 1.6 GB and in my bootloader it say LOCKED
mamali0067 said:
yes of course it's about 1.6 GB and in my bootloader it say LOCKED
Click to expand...
Click to collapse
Is this a zip format RUU? If so, cut/paste the exact commands you used.
redpoint73 said:
Is this a zip format RUU? If so, cut/paste the exact commands you used.
Click to expand...
Click to collapse
yes the RUU is a zip file , but i flashed that RUU perefer in finding right RUU thread and faced with remote : 12 signature verify fail
mamali0067 said:
i flashed that RUU perefer in finding right RUU thread
Click to expand...
Click to collapse
I'm not going to jump around threads looking for the info. I already told you that twice. You should be trying to make it easier for folks to help you, not harder!
redpoint73 said:
I'm not going to jump around threads looking for the info. I already told you that twice. You should be trying to make it easier for folks to help you, not harder!
Click to expand...
Click to collapse
Okay dude , so help me here !
mamali0067 said:
Okay dude , so help me here !
Click to expand...
Click to collapse
You didn't provide the info I asked for: cut/paste the exact commands you used
redpoint73 said:
You didn't provide the info I asked for: cut/paste the exact commands you used
Click to expand...
Click to collapse
Yes , I have been cutted and pasted the command

Categories

Resources