Hello guys, I have HTC ONE_M8 INTERNATIONAL VERSION / UNLOCKED VERSION. I want to use VoLTE but m unable to do so. I have a 4g sim and as soon as I turn on LTE only mode I get 4g Internet access but then m unable to call someone or recieve any calls, its rooted so I need some method to enable volte so that I can connect as well as make calls. Any help would be appreciated. Thank you
What region/country and what carrier?
I don't know a lot about VoLTE, and its pretty new in a lot of regions. But from what I've seen at least in the US (AT&T) they are doing some very carrier specific deployment of VoLTE which doesn't play well with any non-carrier branded ROM.
I also have an International Version of the M8. My carrier just activated VoLTE on their side and say I have to activate it on the settings but I dont see that option anywhere on the settings.
Can someone please help? Is there a workaround?
Cheers
Badelhas said:
I also have an International Version of the M8. My carrier just activated VoLTE on their side and say I have to activate it on the settings but I dont see that option anywhere on the settings.
Can someone please help? Is there a workaround?
Cheers
Click to expand...
Click to collapse
Please don't make multiple posts of the same question.
Hi, my lg g2 ls980 doesn't seem to work on 4g, even though the lte bands are supported by the device. I use a carrier which supports band 3, 5 and 40 and my device supports band 3 and 40. Sim card is also 4g enabled. Originally, the device didn't come with these bands. I added them using qxdm.
When i try to lock to lte using an app called Network Signal guru, it automatically changes to wcdma.
I've posted 2 threads about this issue before and got no response. Those who can help me, please do. It would help me a lot. Thanks!
ps: changing/updating modem doesn't help either.
farhanshaikh671 said:
Hi, my lg g2 ls980 doesn't seem to work on 4g, even though the lte bands are supported by the device. I use a carrier which supports band 3, 5 and 40 and my device supports band 3 and 40. Sim card is also 4g enabled. Originally, the device didn't come with these bands. I added them using qxdm.
When i try to lock to lte using an app called Network Signal guru, it automatically changes to wcdma.
I've posted 2 threads about this issue before and got no response. Those who can help me, please do. It would help me a lot. Thanks!
ps: changing/updating modem doesn't help either.
Click to expand...
Click to collapse
Hey bro how did u add the bands on ls980? I m using ls980..can u provide me the steps to add the bands? Only vodafone 4g data works on mine
umeshbluezzz said:
Hey bro how did u add the bands on ls980? I m using ls980..can u provide me the steps to add the bands? Only vodafone 4g data works on mine
Click to expand...
Click to collapse
I added lte bands using qxdm professional nv write tool. Check out the post on xda because it has very detailed steps. But the bands don't seem to work. I still dont get any network when changing to lte (bands show up in settings, though.) You might want to give it a try and maybe it could work. Btw now I'm using zenfone max pro m1 so I'll not try to rectify the problem anymore. Good luck
farhanshaikh671 said:
I added lte bands using qxdm professional nv write tool. Check out the post on xda because it has very detailed steps. But the bands don't seem to work. I still dont get any network when changing to lte (bands show up in settings, though.) You might want to give it a try and maybe it could work. Btw now I'm using zenfone max pro m1 so I'll not try to rectify the problem anymore. Good luck
Click to expand...
Click to collapse
Yeah i know the post on xda but can u give the files n tools u used which application version? Only send the files u used to add the bands and i'll do the rest
The LS980's hardware (antennas, etc) only supports bands 25, 26, and 41. No software changes you make will add the hardware needed to support other bands.
Hello.
AT&T has disabled all the international GSM\LTE bands on Z999, making it unusable outside of USA (at least in countries with GSM 900\1800, UMTS 2100 & LTE B3 & B20, like the one I live in). In order to change that, we need to turn on the Qualcomm USB Diag port, and for this, the phone has to be rooted.
I've been trying to root my AT&T Z999 for some time now, without any success, unfortunately. However, searching forums after forums, sites after sites, I've discovered the surprisingly easy method of turning on the Diag port without root.
It appears, that Axon M shares a lot with Axon 7, at least the secret key combination to enter Factory Test Mode:
Turn off the phone
Press and hold Power + Vol DOWN buttons until you see the screen "FTM" (see attached screenshot)
You have to press both buttons for the long time, do not release them when the phone starts - just wait until you see the screen. And that's it - you are now in Factory Test Mode and PC sees your phone as "ZTE Handset Diagnostic Interface (COMxx)"
Now, in order to change the bands, you have to follow these guides one after one:
Backup IMEI and NVRAM (ignore all the steps to turn Diag port on, you've done that already)
Unlock LTE bands
Mod edit: Link removed! (this guide in in Russian, but all screenshots are in English & every step is pretty clear)
You would need this tool also.
Please remember, these things are complex, and require considerable experience with Android & Windows. DO NOT START unless you feel confident that you know, what you're doing. I'm serious. Do not try this, if you're not experienced.
WBR,
Draco.
Why mods deleted the link? Google translate exists.
Edit:
I've managed to get the data from the phone using QXDM.
lte_bc_config contained the value of "2251800618993690" now I'm parsing the info how to edit this. Seems like the tutorials don't really match this device. Now I wonder if the chipset can handle invalid data and just input all 1's. Unsupported frequencies just won't work.
Edit2: Writing all 1's didn't work.
Edit3: I wrote this value: "2251802901219551" Calculated with CDMATool. But it seems like the AT&T firmware only finds edge network. I've double checked the bands to be correct ones. So now I will switch to the chinese firmware.
Edit4: Final edit. Turns out you cannot flash chinese firmware on AT&T device. Sigh so my unit is stuck to EDGE/wifi only.
Drakosha said:
Hello.
AT&T has disabled all the international GSM\LTE bands on Z999, making it unusable outside of USA (at least in countries with GSM 900\1800, UMTS 2100 & LTE B3 & B20, like the one I live in). In order to change that, we need to turn on the Qualcomm USB Diag port, and for this, the phone has to be rooted.
I've been trying to root my AT&T Z999 for some time now, without any success, unfortunately. However, searching forums after forums, sites after sites, I've discovered the surprisingly easy method of turning on the Diag port without root.
It appears, that Axon M shares a lot with Axon 7, at least the secret key combination to enter Factory Test Mode:
Turn off the phone
Press and hold Power + Vol DOWN buttons until you see the screen "FTM" (see attached screenshot)
You have to press both buttons for the long time, do not release them when the phone starts - just wait until you see the screen. And that's it - you are now in Factory Test Mode and PC sees your phone as "ZTE Handset Diagnostic Interface (COMxx)"
Now, in order to change the bands, you have to follow these guides one after one:
Backup IMEI and NVRAM (ignore all the steps to turn Diag port on, you've done that already)
Unlock LTE bands
Mod edit: Link removed! (this guide in in Russian, but all screenshots are in English & every step is pretty clear)
You would need this tool also.
Please remember, these things are complex, and require considerable experience with Android & Windows. DO NOT START unless you feel confident that you know, what you're doing. I'm serious. Do not try this, if you're not experienced.
WBR,
Draco.
Click to expand...
Click to collapse
Does this really work? Anyone else tried?
Sent from my SM-N950F using Tapatalk
can you repost the 3rd link?
I can't "repost" the 3rd link, but I can suggest you to open the well-known (and the best) Russian web-site with the name starting with "4" (and having something like "...pda" also), and then add this to the address: /forum/index.php?showtopic=546814&st=4640#entry35702698
Well that russian site has pretty good instructions on how to do it. I tried with one program and it didn't work on AT&T ZTE. I'll try with that qualcomm app again this weekend but if I remember right the last time it had trouble writing because it had no correct service mode code \o/
Drakosha said:
I can't "repost" the 3rd link, but I can suggest you to open the well-known (and the best) Russian web-site with the name starting with "4" (and having something like "...pda" also), and then add this to the address: /forum/index.php?showtopic=546814&st=4640#entry35702698
Click to expand...
Click to collapse
that website's address ends with ".RU", doesnt it?
i accessed that website as your given link, but i cannot see any related threads about ZTE on that, seems all they disscussed about is Lenovo K910SS. was something wrong with my searching?
gaosilver1000 said:
that website's address ends with ".RU", doesnt it?
i accessed that website as your given link, but i cannot see any related threads about ZTE on that, seems all they disscussed about is Lenovo K910SS. was something wrong with my searching?
Click to expand...
Click to collapse
Every Quallcomm device has almost the same NVram configuration rules, the difference is usually on how to enable diagnostic port, but for Z999 I have figured that out already. So, for the configuration process, every Quallcomm guide should work.
I've successfully enabled Z999 to work with 2G & Edge in my country using these guides. 3G & LTE don't work yet, but I'm sure they will eventually. I don't believe Z999 lacks the hardware ability to use LTE B3 & B20 (and other bands), it has to be something wrong with NVram parameters.
For me 2G and Edge worked out of the box in Finland. Tried to enable more but only thing that changed was power usage. Not worth it
Drakosha said:
Every Quallcomm device has almost the same NVram configuration rules, the difference is usually on how to enable diagnostic port, but for Z999 I have figured that out already. So, for the configuration process, every Quallcomm guide should work.
I've successfully enabled Z999 to work with 2G & Edge in my country using these guides. 3G & LTE don't work yet, but I'm sure they will eventually. I don't believe Z999 lacks the hardware ability to use LTE B3 & B20 (and other bands), it has to be something wrong with NVram parameters.
Click to expand...
Click to collapse
It means success unlock 2G/EDGE, not yet with 3G and LTE? When buy the device, it can use other carrer to call and 2G.
When you finger out the way to unlock LTE, please share me.
by the way, do you have the way to enter fastboot mode? I tried the "volunm + &power button" but it just do a normal restart into android.
Fair warning to everyone trying this, make sure you actually do a backup of your IMEI. I didn't and after screwing something up my SIM is no longer detected, and my IMEI is no longer available.
Hello folks!
I have an AT&T phone. I cannot connect to ANY (even EDGE) network!
I modified the configuration several times:
---
I have EDGE with this config:
00441: 0 and 0xFFFF
00946: 0 and 0x06A8
01877: 1677472
02954: 0
06828: 524356
06829: 524356
I got no LTE
---
test2:
06828: 524485
06829: 524485
I got no LTE
----
00441: 0xffff (but 0x380 is recommended)
00946: 0xff8
02954: 0 and 805765120
01877: 3460734838925427584
06828: 1904863
06829: 1904863
I got no LTE, just continous dropping network, useless config.
----
00441: 896
00946: 0 and 0x140
02954: 0 and 131072
01877: 562949974393728
Only edge network, error while searching for networks.
----
06828: 524485
06829: 524485
I have EDGE with this config, but no LTE.
----
Anyone has a good and working LTE mode?!
edit: "The bands on the AT&T z999 are: 2, 4, 5, 12, 29, 30, and 66. "
So, there won't be any Band 1,3,20 for us?!
Thanks!
No one has gotten LTE work on AT&T model. I wouldn't try this.
hene193 said:
No one has gotten LTE work on AT&T model. I wouldn't try this.
Click to expand...
Click to collapse
I had nothing, now I have EDGE, so I am glad to did that modifications...
Drakosha said:
Every Quallcomm device has almost the same NVram configuration rules, the difference is usually on how to enable diagnostic port, but for Z999 I have figured that out already. So, for the configuration process, every Quallcomm guide should work.
I've successfully enabled Z999 to work with 2G & Edge in my country using these guides. 3G & LTE don't work yet, but I'm sure they will eventually. I don't believe Z999 lacks the hardware ability to use LTE B3 & B20 (and other bands), it has to be something wrong with NVram parameters.
Click to expand...
Click to collapse
Have you been able to make 3G & LTE work? I just got my ZTE AXON M from ebay and since I can't use data or make calls/unlock the phone I was thinking of trying this.
Drakosha said:
Every Quallcomm device has almost the same NVram configuration rules, the difference is usually on how to enable diagnostic port, but for Z999 I have figured that out already. So, for the configuration process, every Quallcomm guide should work.
I've successfully enabled Z999 to work with 2G & Edge in my country using these guides. 3G & LTE don't work yet, but I'm sure they will eventually. I don't believe Z999 lacks the hardware ability to use LTE B3 & B20 (and other bands), it has to be something wrong with NVram parameters.
Click to expand...
Click to collapse
Can I describe in detail how to enable 2G?
Thanks !
Hello guys. I've tried all configs mentioned by @ugynok and some of my own - the result is still the same, no 2G network and all options in mobile connections are disabled not clickable. Can you please advice which config worked for you to enable 2G network?
Any luck?
Hi all. Was anyone able to get a useful set of bands working in the UK for this phone?
Many thanks.
V
Drakosha said:
I can't "repost" the 3rd link, but I can suggest you to open the well-known (and the best) Russian web-site with the name starting with "4" (and having something like "...pda" also), and then add this to the address: /forum/index.php?showtopic=546814&st=4640#entry35702698
Click to expand...
Click to collapse
It's the mistake. I don't know how to delete it, sorry.
Does Moto G8 support carrier aggregation? LTE-A? Can anyone confirm or deny this? I have seen conflicting information. What LTE category does this device support? Only Cat 4?
There is only way check via modem log but Motorola doesn't provide any non-root method. If you have rooted device, you can take log with Qualcomm diag method https://cacombos.com/contribute
Thanks for the answer, unfortunately my phone is not root. For now I have no plans to change this (for warranty).
I asked because I saw conflicting information. Some reviews say that we have LTE Cat 13/5 (400Mbps / 75Mbps (Notebookcheck), others talk about cat 12 (600Mbps / 100Mbps), and on the Motorola forum I only found information about cat 4.
Tried checking with NetMonster and sometimes saw aggregations of the two bands (2600 + 800Mhz for example) but the program only showed LTE and not LTE-A. And aggregation disappeared when data was turned on (maybe it's my carrier fault?). I've never seen an LTE+ icon. I also know that this application can show nonsense.
That's why I wanted to ask, because maybe he has already checked it?
Then i don't know any other way to verify Carrier Aggregation support from your device. Not every device show 4G+/LTE+ icon - some maybe show fake icons also.
CAT13 is 2 Carrier Aggregation with 256QAM (Theory up to 400Mbps)
CAT12 is 3 Carrier Aggregation with 256QAM (Theory up to 600Mbps)
NetMonster is not reliable way - I think best way is via modem log. There is instructions https://cacombos.com/contribute but for Motorola there is no non-root method to verify.
--
There could have also multiple different models so please share your device model number. It's in Settings -> About so then if someone else share more details or log then it's important verify device have same model number.
Thanks for the answer. Yes, I know Netmonster can be wrong. In that case, I am waiting for the answer of someone who checked the method described by you. My model is XT2045-2.