Been running PureNexus exclusively on my 5x and love it. However, I am unable to set LED duration in LightFlow even though custom colors work fine. I think the built in LED duration option takes priority over LightFlow's settings. I tried disabling the LED in PureNexus Settings hoping it would allow LightFlow to work unfettered, but it just completely disables the LED (I thought this would happen, but didn't know what else to try). Anyone else on PureNexus found a work around? I don't want to use another ROM as besides this PureNexus has all the options I need built in and very little extra tweaks/mods.
If there isn't a way around this, what other ROMs feature Immersive Mode configuration and NavBar disabling (I know these can be done via other methods, but would rather have it as an easy to access setting). I tried CM13-nightly builds 1/15-1/17 and couldn't get the phone to go past the Boot Logo.
Thanks!
Related
Just downloaded Handcent and the settings that I want on it are not saving. For example I want vibrate only when phone is in vibrate mode. That is not working at all. I also disabled notifications in the notification bar and I'm still getting them. Don't know if being on a custom rom (omj) would affect any of this. Pretty annoying though and was wanting to know if anyone else is having this sort of problem. I also rebooted the phone and no dice still.
Hey guys,
Im having a hell of a time getting light flow (3.12.8) to function properly running under cm11 (currently the dec 21st nightly)
my main issue is the notifications not clearing after i have viewed an sms, the led remains on with screen off and reminder vibrations still occur. there is an "alternate off monitoring" option in the SMS apps notification settings but whether on or off this hasnt helped. ive tried different combination of settings in the main app settings, those being root mode, direct mode, samsung root mode, usa and canada s3 mode (im in canada) and run in foreground but nothing has solved my problem although toying with these has gotten the app to work at all.
my fix for this has been to close all applications, disable light flow, close light flow, and reenable light flow and that will usually fix the problem for a little while but it always returns.
i have always had problems with light flow working, even before when running CM10, but after a lot of tweaking and experimenting with settings the app would settle down and function properly. im not having quite the same luck with CM11.
so let me know if any of you are running light flow successfully and could give me some insight on what settings you are using
OR let me know if there is a simpler app that allows notification editing. i primarily want to be able to control vibration settings for hangouts (not alterable in the apps settings) because i need a really long vibrate to be able to notice it.
I really like my new Oneplus 3, even its size, which I thought would be unbearable. But after using it for a couple days I have at last found something that I really dislike. From what I can tell, the do not disturb settings from vanilla Android have been nixed in favor of the alert slider. Thus one cannot automate times during which, say, the phone allows no notifications or allows only priority level notifications. Nor can do not disturb settings be activated from, say, a widget on the device: the alert slider must be used for everything. I presume the reason is that they don't want the settings to conflict with the slider (eg, going into a do not disturb mode when the slider is in the bottom most position).
However, I would like to be able to control these things from software. Is there any solution involving rooting? The only thing I don't want to do is install a new ROM (I don't want to lose the dash charging).
I am really interested about this too. Loosing the automated acttions such as DnD and Night mode are a setback for me.
Are there any ROMs out there which have at least tackled the DnD issue? The slider could be used then for something else (lock portrait mode, lamp light etc...)
Most apps and widgets I've tried since posting simply don't work, with one exception. I've found that the app Do Not Disturb by Cabooze (sorry, can't link) replicates the missing functionality and seems to mute notifications even when the alert slider is set in the bottom position. This is really not ideal (I would trade the alert slider for stock do not disturb in a second) but is an adequate stop gap.
Thanks for the info, that app seems to be working. But the feeling is the same. I fee like back in the days the function did not exist in stock, looking for tricks/apps and wondering if what I found will be reliable... still hoping we see soon solid custom roms which also offer a solution for all the missing automation.
You can surely use tasker for this...
i've designed an Alert Slider software override (non-root) for the OnePlus 3 (probably works on the newer OnePlus phones as well) It allows for scheduled setting of sound profiles. Need some advice on interest and how to Beta release.
Mike Pearson
[email protected]
(613) 263-9278
Hey,
I upgraded my device from a Nexus 5. In my Nexus 5 I had an option in the Settings to create a schedule for silent times (or priority only). Before I did the switch, I had a setting on to put the device on silent mode at 21:30. Now, in my OnePlus3, I notice that it also goes silent at 21:30 every day (it probably automatically migrated this setting along with the other settings when I first set up the device). But in the OnePlus 3 I no longer have a setting to disable this schedule... This is extremely annoying, because when the device goes into Silent mode I can't even turn up the volume with the volume rocker, I have to physically push the alert slider to "silent" mode and then back to "all notifications" mode.
The device is not rooted and I'd much rather keep it this way if I can.
I hate the fact that there something going on that I can't switch off...
Ideas? Tips? any thoughts will be highly appreciated.
Several people have reported this problem and I have it as well. You are correct that it comes from transferring the settings from your previous phone to the OP3 which has no way to control do not disturb settings through software. None of the suggested fixes have worked for me. My hope was that the new OTA, which apparently had notification fixes would stop it, but it did not. The only thing that has been reported as working all the time is wiping the phone entirely and setting it up as new without transferring your old settings. If you still have your old phone, you could change the settings on it to remove all dnd settings, use it for a bit so that it backs up and then try setting up your OP3 again. I plan on doing that or starting new and fresh later this week.
Edit:
Here's the other thread on this. Looks like the problem exists for people who did clean installs as well. http://forum.xda-developers.com/oneplus-3/help/disturb-settings-t3400979
Had this problem, too. I did transfer the settings from my old phone, but I had no DND settings active on this device (in fact I never ever used DND). The only way to get out of this silence loop was to restart the phone and set the slider to priority and back to all.
daClaus said:
Had this problem, too. I did transfer the settings from my old phone, but I had no DND settings active on this device (in fact I never ever used DND). The only way to get out of this silence loop was to restart the phone and set the slider to priority and back to all.
Click to expand...
Click to collapse
That didn't fix it, the behavior returned after a while.
Apparently this is a big issue:
https://forums.oneplus.net/threads/do-not-disturb-notifications-problem.451989/
Hi all,
i've noted that there is a battery led at the right side of the fingerprint sensor. when the battery is off and u try to switch on ur phone it will glow.
it there an app, without unlocking the bootloader, that allow to use it as a notification led?
thanks in advance
I'm almost certain "no". LightFlow works, but only if rooted.
The "Moto LED Enabler" app doesn't work very well, but in the latest build of LineageOS it becomes with the system setting the option of turn on/off the battery LED as notification LED
djroese33 said:
I'm almost certain "no". LightFlow works, but only if rooted.
Click to expand...
Click to collapse
what are the lightflow settings you used to make it work?
Hi, the only Rom I saw which manages the battery led as notification successfully is Aosp extended. Pretty nice Rom by the way.
I am not sure how, but it does even blink whenever a notification is pending. I saw no way to control it, although the default behaviour is good enough for my needs
Floodland said:
Hi, the only Rom I saw which manages the battery led as notification successfully is Aosp extended. Pretty nice Rom by the way.
I am not sure how, but it does even blink whenever a notification is pending. I saw no way to control it, although the default behaviour is good enough for my needs
Click to expand...
Click to collapse
Ressurection Remix and LineageOS also.
MartianNinja said:
what are the lightflow settings you used to make it work?
Click to expand...
Click to collapse
First, have to be rooted, have to use the paid version (I'm pretty sure that's still a requirement) of LightFlow..
Grant LightFlow SuperUser permission.
I think the main ones are
>In Settings/Device Settings and Root, select:
-Direct Mode
-Root Mode
-Run every command as root
>In Settings/LED Control
-under 'Additional LEDs found,' select 'charging control'
Then, for your chosen apps (and I haven't tested that many, just want for email, sms, and voicemail/missed calls)
go to the Light tab, then find "charging LED" and change to Solid.
'charging Brightness' is at 1 by default, and changing it doesn't seem to matter.
Nice thing on this phone is that the LED, after a few seconds of solid, goes to blinking (on the Moto X Pure, stayed solid)
The solution from "djroese33" works on my Moto G4 Plus 16GB 7.0 (magisk) STOCK.
Use any custom ROM, almost all has that feature.. but without root I don't think it's possible.
It must be rooted.
I use the free Legacy light flow.
Moto LED enabler and Moto E & X Led only allowed me to change it based on the battery charging, not as a notification for emails, texts, calls.
Ive read many posts saying its in nearly every custom rom, but I have not been able to find it in Resurrection Remix.
drewdoog said:
It must be rooted.
I use the free Legacy light flow.
Moto LED enabler and Moto E & X Led only allowed me to change it based on the battery charging, not as a notification for emails, texts, calls.
Ive read many posts saying its in nearly every custom rom, but I have not been able to find it in Resurrection Remix.
Click to expand...
Click to collapse
In RR at least ( this may apply to other ROMs), the notification LED and the battery LED are hiding under Settings>notifications, press the cog icon in the top right corner. Options to enable/disable the LEDs are there, though not as customisable as the aforementioned apps or ROMs.
majo3000 said:
The solution from "djroese33" works on my Moto G4 Plus 16GB 7.0 (magisk) STOCK.
Click to expand...
Click to collapse
Can u give the link of that solution? Or is that the magisk module?
Turn off LED Notification light in Moto G4 Plus (RR rom)
To Disable or Turn Off the led notification light in moto g4 plus(RR custom rom) :
(1) Go to setting
(2) Click on the searching icon then type "Configure Notifications".
Search it then you can see the option to disable the light