Develop Bugs

[REL][Donut SuperFast 1.3 Port][hw3d+wifi working][Root access fix 08.01.10][SCadded]

Do Not Bother xdandroid devs, with fillrate or hw3d being faster on donut than on eclair, plz they are not mages, stuff dont just magically work out of no were
Here is what iv been working on for the past couple of weeks, this was ready before but iv been holding back on releasing it because i was trying to get BT and gsensor fixed or at least attempted to. I figured i wont be able to do it or it will take some more time(if i decide to keep this up to date).Also the system img included is NOT my work it is from HTCClay, the zimage and rootfs.img is from me, what i did to get hw3d on donut was to change the hw3d driver configuration from eclair to donut,for the rootfs i edited and fixed a typo in wpa supplicant part , it was causing wifi to scan and then crash, but now its fixed. This port is not perfect expect bugs
Go ahead and try games and benchmark's this build should be pretty fast.This Rom is based on Cyanogenmod, also donut does not have fillrate bug, so 3d apps and overall system should be faster
I get 4.5mflops in linpack if thats impresive?
Click to expand...
Click to collapse
Screen shots:
Initial Release
Now to the good stuff currently working:
wifi
hw3d
JIT (Working Confirmed by babijoee)
gsm
Data?(i dont have a data plan you have to test for your self)
SDcard
Brightness control
Contacts syncing from SIM
Market (working fine now)
Now whats not working:
BT
gsensor( it works but it seems axis are reversed)
GPS? (probly not havent test so goes in here)
Click to expand...
Click to collapse
[Root access fix][08.01.10]: Place this in Storage Card/andboot/conf and replace the file
http://www.mediafire.com/?sn84lv46b9a244l
Click to expand...
Click to collapse
Update:7.22.10
Added:
AWD launcher
Advance Task Killer
Different Contact app version SIM sync working fine now
AOSP osk, fixes market problems and i also update market app to a newer one
Click to expand...
Click to collapse
Update:7.23.10
Removed some unused apps
Updated zimage to latest one
Still no root, im still looking into this
Click to expand...
Click to collapse
To make shure Hw3d is working fine restart phone after first boot
Compache is disabled on first boot, make shure you activate it in spareparts
Download Link:
Initial Release
http://www.mediafire.com/?z55tvxmb5gldydx
Update 1 07.22.10
http://www.mediafire.com/?zyj8pg53z9q562e
Update 2 07.23.10
http://www.mediafire.com/?e0m32ta3lq0xdn0
Link to original system thread:
http://forum.xda-developers.com/showthread.php?t=654771
Click to expand...
Click to collapse
Also the zimage and rootfs provided are not the latest one, i will try to update the zimage, rootfs i cant because it breaks hw3d for reasons that i dont know
And Last but not Least
Thanks To:
Phh (for teaching me how to compile the kernel and all the quirks that go with it, and ofcourse baring with my noobish knowledge on Android)
Babijoee (helping me figuring out stuff and overall help)
Stinebd (for teaching me how to compile android from source and baring with my noobness, and overall editing and stuff of rootfs)
hamagc
dcordes
Cass
and everyone else i forgot
BTW: this is Unholy from #htc-linux,#xdandroid

reserved for future updates

wooooooooooooooooooo 3rd post
Testing and posting feedback right now
Edit:
I think you should remove the boot command or value
Code:
acpuclock.oc_freq_khz=700000
as some people's device such as my own won't boot on those speeds.
gprs works
A few fs when trying to open app menu
Also you are welcome to steal my startup configs
as i think you shouldn't provide a specific / custom one as other people may want to use this
And it does seem that JIT is enabled
Market works fine
Hrmm no notification/ringtones. Will try a reboot soon
Running neocore crashed phone. Rebooting.

babijoee said:
wooooooooooooooooooo 3rd post
Testing and posting feedback right now
Edit:
I think you should remove the boot command or value
Code:
acpuclock.oc_freq_khz=700000
as some people's device such as my own won't boot on those speeds.
gprs works
A few fs when trying to open app menu
Also you are welcome to steal my startup configs
as i think you shouldn't provide a specific / custom one as other people may want to use this
And it does seem that JIT is enabled
Market works fine
Hrmm no notification/ringtones. Will try a reboot soon
Running neocore crashed phone. Rebooting.
Click to expand...
Click to collapse
thx for the feedback babijoee really apreciate it, neocore works fine here, 18.1 fps with sound,20.9 without sound

I have a little trouble, which comes with the space key on the keyboard and suddenly closes my process: android.inputmethod.latin
So it is impossible to conduct a search or a message of several words.
Otherwise, almost perfect, some delays, but I use it on a Diamond 100.

skypy said:
I have a little trouble, which comes with the space key on the keyboard and suddenly closes my process: android.inputmethod.latin
So it is impossible to conduct a search or a message of several words.
Otherwise, almost perfect, some delays, but I use it on a Diamond 100.
Click to expand...
Click to collapse
witch version are you using?, anyways i will look into that, thanks for reporting it
Edit: osk is working fine here, make shure you are using latest version dated Update 2 07.23.10, and if it the phys keyboard that is also working fine

I use the latest version: 7.23.10.
I will try to clean up properly.

skypy said:
I use the latest version: 7.23.10.
I will try to clean up properly.
Click to expand...
Click to collapse
yea delete data img, start from zero osk should work fine

Sorry for the off-topic, but how did you port this rom from the mytouch.

kdub94 said:
Sorry for the off-topic, but how did you port this rom from the mytouch.
Click to expand...
Click to collapse
search for a guide on touch pro>android development>android cooking

I have been trying for a clean base, same worries, concerns Diam100? French language?

skypy said:
I have been trying for a clean base, same worries, concerns Diam100? French language?
Click to expand...
Click to collapse
im no longer going to keep updating this rom, to many bugs stability issues plague it, JIT makes everything unstable, so i am now in the works of releasing another donut rom, this time its goin to be based on a ASOP rom, it will be themed by me, when its ready i will release it so stay tuned

I trying this build on my Topaz, is good and very fast.
But why WiFi cannot find networks?

DmK75 said:
I trying this build on my Topaz, is good and very fast.
But why WiFi cannot find networks?
Click to expand...
Click to collapse
as i said before you have to use my rootfs, if not wifi will break it is stated very clearly on first post

Donut AOSP released Follow this link http://forum.xda-developers.com/showthread.php?t=739730

test it now post feedback in a few minutes

Ok my Feedback
Compcache -- work
jit ? didnt found any settings oO
headphone -- works
market -- works
widgets -- work
linpack -- 3.4 mflops without overcloack

Mufflon12 said:
Ok my Feedback
Compcache -- work
jit ? didnt found any settings oO
headphone -- works
market -- works
widgets -- work
linpack -- 3.4 mflops without overcloack
Click to expand...
Click to collapse
there is a working and not working list already, and JIT is always on.

i cant sync my kontakt via google oO mail and kalender works !

Mufflon12 said:
i cant sync my kontakt via google oO mail and kalender works !
Click to expand...
Click to collapse
gmail sync if i remeber right worked just fine.

How to get 5GHz Wi-Fi on AOSP ROMs working.

Hello everyone,
I didn't see a thread for this and I am just sick and tiered of not being able to post in dev threads, I figured I would attempt to make something useful for newer users of using AOSP ROMs.
I noticed that when using AOSP ROMs, the 5GHz band won't work, I can see the network but can not connect to it, and in some ROMs I can get it to take the Key but then says something like disabled and still doesn't work. Crazy thing is this is something that is not unique to this Device (the i317), I had a i777 (Galaxy S2) before that and it did the same exact thing. What is even more crazy is the fix is exactly the same for both phones.
While making this post I am going through a wip and re-install of my ROM (PAC-Man in this case, but does it with all other AOSP ROMS)
Some information befor I start, 5GHz is important to me as I use it at home, the 2.4GHz range in my area is quite crowded and I am the only 5GHz network in the area so it works better for me.
Anyways here we go;
Step 1, Install your ROM like normal, once you're signed in to your Google Account download Root Explorer (or something of equivalence) Once that is done proceed to step 2.
(NOTE: If you already have your ROM installed you can skip Step 1)
Step 2, In Root Explorer go to System --> etc --> wifi, once here you're going to see various files. Were looking for "nvram_net.txt" and "nvram_net.txt-murata".
These are the two files were going to modify.
Step 3, Hold your finger on "nvram_net.txt" until the popup window for Options comes up, hit Open With and then select Text Editor. From here you're going to look for a line of code thats "ccode=GB" this is needing to be changed to "ccode=US". Once that has been changed then hit the back button and hit Yes on the save box. This will automatically make a backup of the original file.
Step 4, Were going to do the same thing to the "nvram_net.txt_murata" so open it with the Text Editor and look for the same line of code "ccode=GB" and change it to "ccode=US", save the file.
Step 5, Reboot your phone and once back up go into settings and you are now able to use your 5GHz network.
I hope this helps someone and I hope that one day we won't have to keep changing these settings to get 5GHz working on AOSP ROMs, have fun Everyone!!!!
PS. If you all want screenshots I can do them but bare in mind I would have to wipe my phone again and take them during the process. The instructions should be clear and easy to follow without them.

Excellent....
Many thanks....this will help several people out I'm sure.
Thank you...g

gregsarg said:
Excellent....
Many thanks....this will help several people out I'm sure.
Thank you...g
Click to expand...
Click to collapse
Thank You!!
I need to add something to it, if you ever update your ROM you need to do it again just start from step two.

Thanks for the post. I'm sure those who need 5ghz support appriciate it.
I just saw this post and checked. The latest CM10.1 for today (20130701 build) has the correct US settings. Not sure about other AOSP. However you should mention it to the devs of each one you find it in so they can fix it.

Holy ****balls. I just have to say that.
I'm using Galaxy S3 i9300, been running Slimbean 4.2.2 build 8 flawlessly when I came across that situation where I can't connect to 5G wifi. since then I tried searching for a fix but failed. So i opted to cm13, with utter disappointment with its lag and bugs. And still, hoping for a miracle, i flashed my old recovery back, trying to give it one more chance. Lo and behold, you've given me the fix that I've been searching for all these while. But instead of just that two files, I've changed all nvram_net files ccode with US instead GB. Reboot. And now I'm replying this on my workplace 5ghz wifi. Thanks dude. Very much thanks.

I don't have wifi folder
I don't have the WiFi folder in system/etc

Unknown300 said:
I don't have wifi folder
I don't have the WiFi folder in system/etc
Click to expand...
Click to collapse
Have you found any solutions yet?

Mushfiq Khan said:
Have you found any solutions yet?
Click to expand...
Click to collapse
No what phone do you use?I got a new phone and it seems to work

Unknown300 said:
No what phone do you use?I got a new phone and it seems to work
Click to expand...
Click to collapse
I use pocofone f1.I'm on Aosp extended rom.

.

Mushfiq Khan said:
I use pocofone f1.I'm on Aosp extended rom.
Click to expand...
Click to collapse
Are you from Bangladesh?

Mushfiq Khan said:
I use pocofone f1.I'm on Aosp extended rom.
Click to expand...
Click to collapse
Dont think there is a way to change region in aosp extended roms but some region don't support 5ghz for some reason but it's only in miui I think try joining the pocophone f1 telegram

Android 4.4.2 Omnirom

I read about an omnirom available for our captivate glides running 4.4.2
Anyone tried running this yet? How stable is it?
I found the link here: http://true-android.blogspot.ca/2014/03/update-samsung-captivate-glide-sgh-i927.html
I also dont know, for any rom that has separate gapps, when would you flash those? After or before the new rom? at the same time? Like, if after a ROM flash it automatically reboots, it will boot up with no gapps and likely not run - correct?
Was just curious about how buggy it is. Even if down the road when things are smoother, im excited to see if i can get this one running!

Pawprints1986 said:
I read about an omnirom available for our captivate glides running 4.4.2
Anyone tried running this yet? How stable is it?
I found the link here: http://true-android.blogspot.ca/2014/03/update-samsung-captivate-glide-sgh-i927.html
I also dont know, for any rom that has separate gapps, when would you flash those? After or before the new rom? at the same time? Like, if after a ROM flash it automatically reboots, it will boot up with no gapps and likely not run - correct?
Was just curious about how buggy it is. Even if down the road when things are smoother, im excited to see if i can get this one running!
Click to expand...
Click to collapse
you can find more information here: http://forum.xda-developers.com/showthread.php?t=2541182
Gapps is included. You must install rom zip first, because it formats system partition.
Official gapps doesnt compatible with our phone, I think its better not installing.

hmm..
Pawprints1986 said:
I read about an omnirom available for our captivate glides running 4.4.2
Anyone tried running this yet?
Was just curious about how buggy it is. Even if down the road when things are smoother, im excited to see if i can get this one running!
Click to expand...
Click to collapse
I am using omni ROM . . somehow I find it less buggy than cm 11
Nevertheless I would wanna give my thanks and even though I am pointing out bugs . . I really do appreciate his work .. A lot
Omnirom is very very stable has all if not most of the theming features except for trebuchet launcher
//It is a bit more battery consuming but I like it cause I am able to run my processor at 1.4ghz which is sweeeet!!!
//It has issues with OK Google functionality the audio is lagged and irritating
//The Google experience launcher is not built for it
//It has issues with Google maps 7 but there is a fix to have 6th version to back you up when needed
//it has issues with Skype and the fix is work in progress I guess..
//GPs is a bit slow but works
//WiFi direct crashes for me
Once in a blue moon the phone might rebot itself cause of a crash..
Though considering WiFi tethering , 3g switching, link2sd ,memory swapping
Ksm everything is working really try it . . its an amazing experience from an amazing phone

Can someone tell me the difference between wifi direct, wifi sharing, and wifi sharing manager??
Wifi itself is working in 4.4.2 right?
Also, were your keyboard backlights working automatically or did you ened qwerty led?
is qwerty led something that needs to be running all the time. or "ongoing" in the top drawer?

Wi-fi direct is a type of communication between two devices, similar to Bluetooth, so you can send files. I never used this, even when transfering big files from one phone to another, it's better to use an USB OTG cable - the connection speed is lightning fast!
Don't know what you mean about wi-fi sharing. Maybe wi-fi tethering (hotspot) - it's when you share your phone 2G/3G internet connection via wi-fi. This thing is working fine. Wi-fi itself is working, of course.
As for keyboard light: when tested OmniROM, I used liblight solution, but the qwertyled using is simple too: just launch it and you're done. While the service is running, keyboard light will work.
Now I'm on CM 11, and I have 11 days of uptime already, I recommend this ROM (but that's just my taste). In CM 11 keyboard backlights are working from the box, no need for qwertyled.
Also, I looked at the link you posted, to the true-android blog. Please, don't use the guide one can found there, it's awful. You can't install 4.4.2 ROM with recommended 2.6.3.0 TWRP, the correct one is 2.6.3.1 from bubor here, and you don't need any gapps beside included in the ROM.
Better use this guide from stormdude124: [UPDATED][2014][How-to]Everything you need to know and do to your Captivate Glide, it's updated, it's verified and there's no ads!

Makshow said:
Now I'm on CM 11, and I have 11 days of uptime already, I recommend this ROM (but that's just my taste). In CM 11 keyboard backlights are working from the box, no need for qwertyled.
Also, I looked at the link you posted, to the true-android blog. Please, don't use the guide one can found there, it's awful. You can't install 4.4.2 ROM with recommended 2.6.3.0 TWRP, the correct one is 2.6.3.1 from bubor here, and you don't need any gapps beside included in the ROM.
Better use this guide from stormdude124: [UPDATED][2014][How-to]Everything you need to know and do to your Captivate Glide, it's updated, it's verified and there's no ads!
Click to expand...
Click to collapse
Can you use a cyanogen mod rom with clockworkmod recovery installed? i remember trying cyanogenmod with my phone and couldnt get it to work.

Just flash TWRP 2.6.3.1 from link above, it's superior to clockworkmod recovery (CWM) in all ways: touch interface, working backups with compression, charging support and it allows to install KitKat roms. With CWM you can install ROMs up to android 4.3, so, you still can install CM 10.1.3 or CM 10.2 with CWM, but not CM 11.

about wifi direct and sharing...
Pawprints1986 said:
Can someone tell me the difference between wifi direct, wifi sharing, and wifi sharing manager??
Wifi itself is working in 4.4.2 right?
Also, were your keyboard backlights working automatically or did you ened qwerty led?
is qwerty led something that needs to be running all the time. or "ongoing" in the top drawer?
Click to expand...
Click to collapse
Hey yeah the difference btw wifi direct and sharing is that in wifi direct you connect two devices directly to transfer files...
in wifi sharing you need to host a web adress to share your files
as a result in wifi sharing you host a list of your stuff on a web adress(local) which gets downloaded by other devices on your wifi connection
and a wifi sharing manager can either do this (host ur files using an ip) or my personal favorite is astro which can acess my pc's sharing folder over wifi which is preety awesome>..unlimited storage
also note that in a wifi sharing manager you cannot recieve files easily . . maybe airdroid but it can only run on a pc
wifi sharing apps are airdroid and other file managers like root browser
wifi direct requires specific drivers and libs... i guess.. hence not all devices can do it ..
anyway you should go for cm 11 or omni both are incredibly stable with an occasional hiccup.. which is occasional heh
also would suggest that if you do proceed to install please follow from the developer sources on xda rather than some blog etc

[Rom] 5.0.1 BOB7 Stock De/Odexed Debloated Light

TeamDevDigitelV3 5.0.1 BOB7
Odexed/Deodexed
Stockish Debloated, Rooted, Optimized, Removed Setup, Quickboot, Minimalist
Hotspot ect..
(Deodexed is Revision 2 and up)
Stock Touchwiz Android L 5.0.1
@tx_dbs_tx ( finally got everything sorted with stock kernel/su not being installed correctly awsome work.)
All of the bloat has been removed but all the samsung features/applications have remained intact (Spen ect)
All apps removed can be returned from Playstore as a user app.
WARNING I AM NOT RESPONSIBLE FOR ANYTHING THAT YOU CHOOSE TO DO TO YOUR DEVICE.
●If you have Private mode or Fingerprints setup, always remove prior to making a backup, it will result in the saved info getting curupt●
**********************************
○○○INSTRUCTIONS○○○
***********************************
YOU MUST BE ON THE 5.0 FIRMWARE THIS WILL INSTALL STOCK BOB7 KERNEL.
1.) Suggested that each build is always flashed after a full wipe has been completed. If you have bugs, issues and didnt wipe then you now know why.
*Please only flash roms with ample charge to support a full boot and set-up.*
2.)Flash the provided zip and wait for it to complete. I always flash from the sd card because i wipe my internal storage each time i flash a build.
3.) Once completed reboot system and wait for it to present the home scren. It takes aprox. 3-5 minutes to boot.
4. Update apps and set up phone as usual. Enjoy and provide feedback
¤¤¤¤¤¤¤¤Known Bugs:¤¤¤¤¤¤¤¤¤
1)N/a
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤
¤¤¤¤¤¤¤¤
I will be including over time update zips to help you modify the system.
Please see post #2 containing flashable zips.
And as usual please hit thanks button to keep the development coming motivation to continue updates.
#############################
Rom Downloads
#############################
[BOB7 Odexed]
VERSION 3 Final :
https://www.androidfilehost.com/?fid=95916177934547089
VERSION 2:
https://www.androidfilehost.com/?fid=95916177934542988
VERSION 1:
https://www.androidfilehost.com/?fid=95916177934542949
[BOB7 DeOdexed]
VERSION 2:
https://www.androidfilehost.com/?fid=95916177934543301
♤ThankYou Millerboy3 for doing this and uploading it!♤
ABOUT:
Version: 5.0.1 Lolipop
Firmware: N910PVPU1BOB7
Release Date: 3/27/15
Devs : Please feel free to use this base, at this point most/all bugs have been cleared. Please just give credit when due there is no permission needed to use.
(THANK YOU)

#2
$$$$$$$$ FLASHABLE ZIPS $$$$$$$$$
Private Mode Fix (N/a build 2 and up)
http://www.mediafire.com/download/h41ldmcmjv2si2k/PrivateModFix.zip
Volume Adjustment
10% increase
https://www.androidfilehost.com/?fid=95916177934543062
Stock
https://www.androidfilehost.com/?fid=95916177934543063
Toggles
Add Data Toggle
https://www.androidfilehost.com/?fid=95916177934543064
Toggles Exploded
"Don't expect them all working yet"
https://www.androidfilehost.com/?fid=95916177934543065
MobileData/Toolbox toggles
https://www.androidfilehost.com/?fid=95916177934547113
○●○●○●○●○●○●○●○●○●○●○●○●○●○●○●
Hotspot Mod/Remove Volume Warnings / Themes Ect:
** Be Aware with 5.0 in its infancy the mods all may not be avaliable yet as a full flashable zip, alot of them just need restructured for the 5.0 filesystem and can be manualy moved over to 5.0**
Please see here :
http://forum.xda-developers.com/showthread.php?p=57124981
[ROM] [Sprint Hybrid X-Series]

Thanks & Resources
*
*
*
*Millerboy3
*MasterZen88
*ArchiKitchen
*TekHd
*LMMT
*tx_dbs_tx
*AxAtAx
*
*

Mine

Team DevDigitel said:
Flashables
Click to expand...
Click to collapse
you can include these to help those coming directly from NK2
BOB7 Bootloader/Modem ODIN Flashable Tars

Awesome!!!!

Flashing ael kernel fixes Su prompt issues. So I would assume it's something kernel related. How this helps to get the issue fixed

Team DevDigitel said:
I'm just waiting for the offical img.)
This is a custom build off of the
5.0.1 BOB7 Touchwiz Firmware 5.0 tar provided by @millerboy3 , ill be using this base until the official image is available.
Click to expand...
Click to collapse
The official TAR is out: http://forum.xda-developers.com/showthread.php?p=59483780
Exciting times[emoji2]

Yeah i seen thanks..
I already dl it..just too tired to mess with tonight.. was slow today and built this while at work and just had to put everything online before i called it a night

Been running your 4.4 ROM as my go to after messing with other ROMs. Thank you for your work and look forward to a polished release to have when things get buggy elsewhere. Keep it up

Im not sure whats happening , but I flashed the bootloader and modem manually and wiped in TWRP, but it would not boot up, not sure what's causing this? help

treo4life said:
Im not sure whats happening , but I flashed the bootloader and modem manually and wiped in TWRP, but it would not boot up, not sure what's causing this? help
Click to expand...
Click to collapse
Try to reflash after wipe.. or flash rom then Kernel after rom flash.
I havent had anyone report it is booting for them or not. .

Cant see the captcha on media fire. Even if i put the browser on desktop mode, the captcha shows up and when i type it in and click on authorize download it takes me back to mobile view

infamouzwt said:
Cant see the captcha on media fire. Even if i put the browser on desktop mode, the captcha shows up and when i type it in and click on authorize download it takes me back to mobile view
Click to expand...
Click to collapse
Do you have ad away or other ad blocker enabled? I would suggest dl using operah browser or chrome..
Sorry for captcha on mediafire.. ill get the next versions on afh

I deodex'd this. Seems to work well so far, aside from that given FC from time to time.

millerboy3 said:
I deodex'd this. Seems to work well so far, aside from that given FC from time to time.
Click to expand...
Click to collapse
If you could toss it onto afh ect and send a link id be happy to include..
I set kitchen up from the offical tar but im just busy as f right now to do anything atm. Glad to hear it flashed well for you

Team DevDigitel said:
If you could toss it onto afh ect and send a link id be happy to include..
I set kitchen up from the offical tar but im just busy as f right now to do anything atm. Glad to hear it flashed well for you
Click to expand...
Click to collapse
Just doing some general testing first and I'll be sure to link it for you.

Team DevDigitel said:
Do you have ad away or other ad blocker enabled? I would suggest dl using operah browser or chrome..
Sorry for captcha on mediafire.. ill get the next versions on afh
Click to expand...
Click to collapse
I used opera browser and when i click on download and choose the path where to save, it says failed right away

infamouzwt said:
I used opera browser and when i click on download and choose the path where to save, it says failed right away
Click to expand...
Click to collapse
Mirror:
https://www.androidfilehost.com/?fid=95916177934542949

Team DevDigitel said:
Mirror:
https://www.androidfilehost.com/?fid=95916177934542949
Click to expand...
Click to collapse
Thank you very much. Cant wait to try it out

CM 12.1/13 - various builds

Hello guys, I'm going to share some CM builds I've found online and I'd like you to try them and discuss them. Thanks to collapseromer.
Builds are usually compatible both to US and Chinese devices: please say which version you're using when you post/report bugs since we'd like to confirm that.
Most recent I've found (old versions hidden):
BetaHydri (12/07/2016):
http://forum.xda-developers.com/leeco-le1-pro/development/cm12-1-rom-betahydri-letv-1-pro-t3416651
Thanks to our fellow @BetaHydri we have the best of both worlds: working location service (even for mobile and wifi, Smart Lock via location should work now!) and working videos. Nice job!
Collapseromer's 20160628 build:
http://rom.7to.cn/romdetail/1012717
https://mega.nz/#!H91Q0RCB Passcode: !R1XXlc3yt8gUORagS7B-4PVf9ZCFP7uueVTIY8AMY08
OK, things are getting serious: we've got Play Store and Google services working fine (location via mobile data and wifi not working), all kind of streaming videos play fine, framerate for GPU intensive games is unbelievable compared to LeTV's 12S stock ROM based Custom ROMs; no major bugs to note except Parrot's Free Flight 3 app not working.
Dolby Atmos/AudioFX can be fixed using http://forum.xda-developers.com/showpost.php?p=67579077&postcount=109
Collapseromer's 20160528 build:
http://rom.7to.cn/romdetail/1012091 --> Chinese thread
http://pan.baidu.com/s/1boNb5Ll --> download from China
https://mega.nz/#!QgoihJCQ!RpD2O1knJ5L6uAOGI7I6elv6spUNrPXD7whpqb6y2kE --> mirror
Google Play Store started FCing after like an hour since I installed. I've tried a few things to get it back (uninstall via Root Explorer and reinstall, clear cache and data, flash GApps again) but so far no luck; funny enough, it's auto-updating installed apps and installing apps when I do that via browser just fine. :/
EDIT: Now it works... I guess it's because of the modified build.prop I applied, which I'm attaching here..
Actually I kept getting Play Store working on and off and I couldn't understand what triggers that so I reverted to the ROM below.
Collapseromer's 20160512 build:
https://app.box.com/s/ua2ekx0g54iltp2nj9b8uo2fykciylwg Uploader got out of bandwith, use link below
https://mega.nz/#!J8wTRS7Q!HFnr-waFdMvbJM-69doDuvmC2CI3RPytI8ODXNaqMio
- This ROM gets everything working except Periscope and Facebook videos.
As an attachment you can find a flashable zip to restore volume switch function on any CM build! Thanks http://bbs.le.com/thread-1675368-1.html
Please note I always disable all the Chinese apps (for example using https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup&hl=i) and install Stock/Aroma Open Gapps (http://opengapps.org/).
This is a guide to trim the ROM zip from variuos apk's, use wisely: http://bbs.elephone.hk/thread-2939-1-1.html
And this is an additional trim guide which was true for collapse-cm-12.1-20160512-UNOFFICIAL ROM, not confirmed on newer versions
Code:
[B]system\app folder[/B]
360mse-->chinese app
660007-->chinese app?
baiduinput-->Chinese keyboard, watch out as there are no other keyboards!
clear-->Perfectly Clear? (photo)
CollapseSettings-->??
cpuspy
Development-->??
Flash-->Adobe Flash?
sogousearch-->chinese sogou
wandoujia-->chinese baidu
[B]system\priv-app[/B]
audiofx-->not working
trebuchet-->only if you flash Gapps and use Google Launcher
Missing SIM possible solution (thanks 0rk0 from http://www.letv.re/topic/1020-letv-x800-lost-imei/?do=findComment&comment=9608)
Code:
1. With the card inserted and unacknowledged make a call by typing: * # * # 4636 # * # *
2. Appear a menu with several options: informaticion phone, battery information, usage statistics and wifi information. That we are interested in "phone information" we click on it.
3. We get a lot of things and options. We seek "Set preferred network type" and we click on the tab that appears below us which allows us to select different types of networks.
When you first enter this menu appeared selected the option "TD-SCDMA, LTE, CDMA, EVDO GSM / WCDMA," possibly this was the problem, it was the wrong choice. So it was.
4. Change the option to "LTE / GSM / CDMA auto (PRL)" and restart your phone (you simply have to select it and get out the normal phone menu
This is the official device support request CM thread, chime in! https://forum.cyanogenmod.org/topic/120767-letv-x500-x600-x800/
And head over here to review the ROM, I think that may stimulate collapseromer to build more, maybe even CM13! http://rom.7to.cn/romdetail/1012717
What's your mileage guys? Could you get some CM13 somewhere, maybe? Please share your files and experience, LeTV ROMs are just clueless and I really think CM is the only way out: how could you develop such a useless lockscreen and notification shade, LeTV?

Hmm... Great stuff. I also not very impressed by EUI... What about Sim card slots, mobile Internet and camera? Do all these things work on CM too? How about battery life? Is it improved or same or less?
Sent from my Le 1 Pro using Tapatalk

I'm using slot 2 only and data/calls/messages work fine; both cameras work, with 4k videos too; battery is more or less the same, I can go morning to evening just like Cuoco's. I really insist you should try, unless letv starts developing good things (but it seems like Android 6 ROM doesn't change much) I'll never look back; moreover, someone may port cm13 sooner or later.
Inviato dal mio X800+ utilizzando Tapatalk

How's the camera quality, compared to EUI?
Thanks for this share OP =D

Not at all, dude, I just want to spark some conversation and maybe development for this DOA device...
Camera is fine, you even get 4k video recording from main camera and 1080p from the front facing one. Even official EUI ROMs are not that good, with camera: videos always fail to autofocus and you have to keep pressing on screen to refocus, while pictures live preview is slow and generally not so good with low lighting.
Please H3G, deliver the HTC 10 and I'll get that in a heartbeat so I can stop going slightly mad with this device!

teorouge said:
Hello guys, I'm going to share some CM builds I've found online and I'd like you to try them and discuss them. Thanks to collapseromer.
Please note I always disable all the Chinese apps and install Open Gapps
Most recent I've found:
http://rom.7to.cn/romdetail/1012091 --> Chinese thread
http://pan.baidu.com/s/1boNb5Ll --> download from China
https://mega.nz/#!QgoihJCQ!RpD2O1knJ5L6uAOGI7I6elv6spUNrPXD7whpqb6y2kE --> mirror
This is a great ROMtoo bad Google Play Store started FCing after like an hour since I installed. I've tried a few things to get it back (uninstall via Root Explorer and reinstall, clear cache and data, flash GApps again) but so far no luck; funny enough, it's auto-updating installed apps and installing apps when I do that via browser just fine. :/.
EDIT: Now it works... I guess it's because of the modified build.prop I applied, which I'm attaching here.
https://app.box.com/shared/static/ua2ekx0g54iltp2nj9b8uo2fykciylwg.zip
This ROM gets everything working except Periscope videos.
What's your mileage guys? Could you get some CM13 somewhere, maybe? Please share your files and experience, LeTV ROMs are just clueless and I really think CM is the only way out: how could you develop such a useless lockscreen and notification shade, LeTV?
EDIT: this is the official device support request CM thread, chime in! https://forum.cyanogenmod.org/topic/120767-letv-x500-x600-x800/
And this is a hardware-similar device which got CM, maybe it helps someone. http://download.cyanogenmod.org/?type=snapshot&device=sambar
Click to expand...
Click to collapse
Hi,
do I understand correctly that this "collapse-cm-12.1-20160531-UNOFFICIAL-X800" version works on our LeTV 1 Pro X800 US/CE model?

BetaHydri said:
Hi,
do I understand correctly that this "collapse-cm-12.1-20160531-UNOFFICIAL-X800" version works on our LeTV 1 Pro X800 US/CE model?
Click to expand...
Click to collapse
Correct, any CM you'll find in this thread works both for CN and US versions, I'm using an US device myself.

teorouge said:
Correct, any CM you'll find in this thread works both for CN and US versions, I'm using an US device myself.
Click to expand...
Click to collapse
Ok thanks !
Then I will try it today, as I have some problems with my actual CUOCO 11S V4.3 which could not be OTA updated anymore for whatever reason.
Did't you installed OPENGAPPS arm64 version right after the ROM flash ?

Right, opengapps build, 64 bit, Android 5.1, flashed right after ROM (put two zips in queue, in case you're wondering). Let me know which build you're going to flash and how you like it.

teorouge said:
Right, opengapps build, 64 bit, Android 5.1, flashed right after ROM (put two zips in queue, in case you're wondering). Let me know which build you're going to flash and how you like it.
Click to expand...
Click to collapse
Get on this site and add comments guys, this way we may get collapseromer's builds more often and maybe even its CM13...
http://rom.7to.cn/romdetail/1012091

teorouge said:
Get on this site and add comments guys, this way we may get collapseromer's builds more often and maybe even its CM13...
http://rom.7to.cn/romdetail/1012091
Click to expand...
Click to collapse
I installed it ! But on boot I choosed german as language maybe not a good idea. Will try again with english at first boot-up.
I noticed following:
- I installed OpenGAPPS Stock Version for 5.1 / arm64
- Google Play Store is crashing
- AudioFX is crashing
- four to six useless chinese apps included into the ROM
- One settings extension is completely in chinese
Anyway if I'm able to remove the for me useless stuff and fix the crashing of the play sotre, then I will keep this ROM.

Which ROM build did you flash? I reverted to https://app.box.com/s/ua2ekx0g54iltp2nj9b8uo2fykciylwg for now, just because of Play Store issues (even though it actually worked since I could install apps via browser and apps were auto-updating I could open it only sporadically, most of the time it force closed).
- AudioFX crashes here too, I actually never tried that since all my audio needs are speaker and bluetooth;
- You can easily freeze/uninstall those Chinese apps: enable CM root access in standard developer settings, install Titanium Backup or similar from Play Store (or via apk from apkmirror.com) and get rid of them;
- That settings item in Chinese language is actually just a container for all those Chinese apps you want to kill, so don't bother. It will force close if you click on it, once you freeze/delete those apps.
- I always choose Italian as system language and everything is in Italian: except for those Chinese apps, of course, but they never survive for a long time.

teorouge said:
Which ROM build did you flash? I reverted to https://app.box.com/s/ua2ekx0g54iltp2nj9b8uo2fykciylwg for now, just because of Play Store issues (even though it actually worked since I could install apps via browser and apps were auto-updating I could open it only sporadically, most of the time it force closed).
- AudioFX crashes here too, I actually never tried that since all my audio needs are speaker and bluetooth;
- You can easily freeze/uninstall those Chinese apps: enable CM root access in standard developer settings, install Titanium Backup or similar from Play Store (or via apk from apkmirror.com) and get rid of them;
- That settings item in Chinese language is actually just a container for all those Chinese apps you want to kill, so don't bother. It will force close if you click on it, once you freeze/delete those apps.
- I always choose Italian as system language and everything is in Italian: except for those Chinese apps, of course, but they never survive for a long time.
Click to expand...
Click to collapse
I flashed this one that you posted at the beginning:
https://mega.nz/#!QgoihJCQ!RpD2O1knJ5L6uAOGI7I6elv6spUNrPXD7whpqb6y2kE
Should I try the one that you posted in the BOX account ? Isn't it the same ?

Nope, slightly older: try that.

teorouge said:
Nope, slightly older: try that.
Click to expand...
Click to collapse
can't download the one in the box account. The download don't start...

You're right, the uploader went out of bandwidth: I'm uploading to Mega myself, it should be ready in less than an hour. Of course I'll change the links too.

teorouge said:
Nope, slightly older: try that.
Click to expand...
Click to collapse
Is this one is from 07.06.2016 the same that you put on mega ?
http://rom.7to.cn/romdetail/1012091 --> The problem how to download it from there without the chinese downloader ?
[Android 5.1] [6.5.12] [music 1Pro-CM-12.1- rapid and smooth]
OF: collapseromer Android version: 5.1.x
UI Type: CyanogenMod a ROM Size: 425.00MB
Applicable models: music as the X800 + (Le 1 pro) Published: 2016-06-07
---------- Post added at 02:38 PM ---------- Previous post was at 02:29 PM ----------
teorouge said:
You're right, the uploader went out of bandwidth: I'm uploading to Mega myself, it should be ready in less than an hour. Of course I'll change the links too.
Click to expand...
Click to collapse
I noticed that I had already downloaded it during last week.
But see my last reply:
So this one is from 07.06.2016, is this the one that you put on mega ?
http://rom.7to.cn/romdetail/1012091 --> The problem how to download it from there without the chinese downloader ?
[Android 5.1] [6.5.12] [music 1Pro-CM-12.1- rapid and smooth]
OF: collapseromer Android version: 5.1.x
UI Type: CyanogenMod a ROM Size: 425.00MB
Applicable models: music as the X800 + (Le 1 pro) Published: 2016-06-07

Original filename of the file I'm uploading to Mega is collapse-cm-12.1-20160512-UNOFFICIAL. If you have that one just flash. Build date is 2016-05-12 (12/05/2016 in Europe), you can see it from the filename.

teorouge said:
Original filename of the file I'm uploading to Mega is collapse-cm-12.1-20160512-UNOFFICIAL. If you have that one just flash. Build date is 2016-05-12 (12/05/2016 in Europe), you can see it from the filename.
Click to expand...
Click to collapse
Yes exactly. I flashed it already Play Store works on this build from 12.05.2016. Cool !
I already deactivated all the chinese APPS via APPS Settings --> All Apps. It's important that you have to download first a new keyboard like google keyboard. As the chinese/english one will be also unavailable when deactivating all chinese app/services from settings.

Yeah, so far that build worked fine, only occasional non-playing Periscope/Facebook videos. Even installed Xposed Framework with a few modules.
Oh, are you using Trebuchet or Google launcher?