Possible solution for wrong firmware flashing brick? - Upgrading, Modifying and Unlocking

Hi guys, I got a phone here that my friend tried to upgrade it by using another phone model's rom. because both phones are same chasis n spec, exactly same looking on hardware even though from different brand.
THE PHONE IS BRICKED, NO RESPOND TO ANY BUTTON AND CANT BOOT AT ALL. ( NO EVEN BOOTLOOP OR ANY SIGNAL/VIBRATE)
anyone here hv solution or experience to share with?
p.s. the phone are meitu 2 mk260 from china, the rom flashed is from micromax canvas selfie a255. both phones hv almost same chasis n exactly same spec. MTK based. flashed using scatter loading method with sp flash tool.

Hi, is it possible for you to boot to recovery mode or bootloader mode? Also have you tried connecting it to a PC and seeing if it was detected?
As far as my experience goes, if you have a custom recovery installed and boot to it through a key combo (usually holding volume down and the power button) you can fix it from recovery. If you can boot up to the bootloader you could use fastboot commands to flash a custom recovery and fix it that way. Hope you're able to find a fix to your problem, good luck!

Related

Asus Zenfone 2 Bricked , Please somebody help

Hi all members,
I dont know anything much about develpoment, I have ZE551ML 32gb version. I rooted my phone and it was working fine until i installed layers manager from playstore and applied new layers and instantly after restarting the phone was struck on bootloop .. So after searching a bit i managed to open the phone in fastboot mode .
after then i did a factory reset and restarted the phone but the problem of bootloop was still there .. so after searching more i decided to install a custom rom, for that i first used adb tools to flash a twrp recovery in fastboot mode and when i try to enter in recovery mode the phone restarts and enters the fastboot screen itself not on recovery screen. So for me there is not way to enter in recovery mode . So someone please help me and repair my phone i will be very grateful.
Yea you can only install layers for roms that support them. stock doesn't support it. is your bootloader unlocked? if not first do then that try flashing a recovery again.

HTC Desire 616: Dual Sim Bricked error S_DL_PMT_ERR_NO_SPACE(5069)

HTC Desire 616 Dual Sim Bricked error S_DL_PMT_ERR_NO_SPACE(5069)
Recently i played Real racing 3 after played and close game i got error from google play store force closed, then i reboot my device i faced bootloop so i decided to clear cache still wont boot then i try to hard reset but hard reset not complete.
i tried to reinstall stock rom using sp tool i got some error S_DL_PMT_ERR_NO_SPACE(5069). I used this stock rom many time before it success but this time it was not working n give me error ,, i tried many steps i try in another pc then i tried different rom different port different version of sp tools,,, i checked memory test also (NAND Flash: ERROR: NAND Flash was not detected!)i doubt it hardware problem in my phone not software or pc problem i just want make sure....
please help me if anyone has solution for this :crying: :crying: :crying: :crying: :crying:
mine is also same problem
plz provide solution if any
same problem here. maybe bootloader locked ?
Guys I have bricked my phone and was trying to fix it using stock rom and sp flash tool but getting an error 5069.I need a back up of desire 616 which is made by mtk droid tool which include a file name "firmware.info" and includes "md5" files to unbrick it.phone is not booting up but is detected by the computer I.e phone is entering in meta mode but not booting up no Htc logo no charging only black screen help will be highly appreciable
qsusb_dload mode
Your phone in under the above mentioned title mode. One thing you can do is to reflash the bootloader and bring it back into flashable state.
braindeductions said:
Your phone in under the above mentioned title mode. One thing you can do is to reflash the bootloader and bring it back into flashable state.
Click to expand...
Click to collapse
how i can do this? bu sp flash tools? help pliz

Dead android one, last ditch effort.

Hey guys,
So my canvas a1 died after I flashed the stock kitkat rom on it using sptools coz it was stuck at the micromax logo. It has been a while since and Ive gotten a new phone but in last attempt to see if it is recoverable or scrap I'm posting this.
The Problem:
-Phone is completely dead wont power up or charge but is detected by sptool, so cant into fastboot or recovery mode.
- Windows detects the phone too with a notification sound and then says usb devices connected is not recognised
-I can still flash all+download using sptool I tried both Lollipop as well as stock kitkat roms,still its the same dead.
-If I try to use firmware upgrade in sptool I get this error: proinfo: failed to get PMT info
I've looked at quite a few threads and forums to no avail.If any one knows a solution to the problem it would be much appreciated.

Xperia Arc S LT18I stuck on logo, no fastboot or flashmode available.

Hello friends, i have a problem with an old Sony LT18i from a cousin, he brought it to me because he has the China Mobile variant with no GApps and android version was 2.3.4, i thought it might be solved with a simple flash via FLashtool, but when i've completed the downloading of the ftf file and went to flashtool to flash it, when the flashtool ask me to put it in flashmode pressing the back button and connecting to usb the phone led only blinks of 0.5 sec and then boots into normal mode.
Tried the same with fastboot and then i got the same blink for 0.5s with no detection at all. That surprised me as well i've have flashed succesfully other Xperia devices with no problems of led blinks at all. Now my problem is that later i tried to root the phone and installing CWM to flash another ROM or GApps package, and when i finished to install the recovery now the phone is bootlooping and never gets to boot normally.
I've tried with 4SE dongle to flash it via Testpoint and it doesn't work as the phone manufacture model is 12W13 (new security) which the dongle doesn't support, tried with S1 Tool with version 28II215 and 080714 and i only get PHONE NOT SUPPORTED IN THIS MODE when i try to flash and when trying to unlock the bootloader it gives me NOT SUPPORTED MCU REVISION.
The phone was working well until the CWM installation except for the flashmode and fastboot mode, now i really need to flash it and i can't find a way to do it, i also have RIFF JTAG and Z3X Easy JTAG box but no JTAG available for this model except for Medusa Box which only supports phones with manufacture date less than 12W10, i was wondering if thereĀ“s a way to access via QHUSB_DLOAD mode doing the testpoint to manually flash partitions to device or something like that. If you might have a workaround or a solution to at least let the phone in the way it was it will help me a lot. Thanks in advance, sorry if my english isn't so great.
Short blink usually means bad USB cable (at least it did for me). Simply try using another cable.

Mi 6 successul flashing but still facing with bootloop problem.

My phone is got into bootloop. I can access to fastboot and successully flashed stock rom but it still bootlooping. Then I tried EDL mode and flashed same official stock rom again yet still facing the same problem. Phone can stay in fastboot mode as much as i want. So i don't think it is a hardware issue. I would be grateful if someone give me even an advice.

Categories

Resources