Related
Few n00b questions.
Firstly, how do i flash a nightly on my phone? lets say im running ofw 2.2 SEA edition? Do i follow the same procedure as if to flash RC1... do i also need to flash gapps similarly.
Secondly, are the links on quarxs' CM7 for defy thread up-to-date? or are there newer versions of gapps and nightlies floating around somewhere
Third, i have noticed that there is an issue with network and wi-fi when i flash cm7 RC1 over the nordic sbf. when i go back to official 2.2 SEA there is no hassle at all. Since i live in india i was wondering if that was the issue. I can easily take care of the network problem using "baseband switcher for defy" but it still doesnt help the wi-fi problem.
My question is.. will using the new BOOTSEA nightly solve this problem. I am assuming from the name is boot"SEA" im assuming its built southeastasia specific.
Fourth, ive used CM7 RC1 for a while and apart from the wifi issue i got problems with camera and video... it absolutely doesnt work, wether it be in potrait or landscape or whatever setting... the app just force closes. Any fixes for that.. ive got green lens.
please help!!! and i hope other similar questions can be added by members here so as to make this thread an FAQ for distressed users like me.
Thanks
deathw15h said:
Few n00b questions.
Firstly, how do i flash a nightly on my phone? lets say im running ofw 2.2 SEA edition? Do i follow the same procedure as if to flash RC1... do i also need to flash gapps similarly.
--> I'd say install RC1 and gapps first, then try a nightly by just wiping cache and Dalvik - no need to install gapps again since they're on your phone now. If you install a BOOT version and want to go back to an earlier CM7 nightly, then you might want to start from scratch, reflash froyo and install RC1 + gapps again.
Secondly, are the links on quarxs' CM7 for defy thread up-to-date? or are there newer versions of gapps and nightlies floating around somewhere
--> mostly up to date, but I don't worry about gapps too much as I believe that the Market gets updated automatically anyway (but I might be wrong about that). On the OP, the link to the gapps should show you up to date versions; but read the comments on there - very important.
Third, i have noticed that there is an issue with network and wi-fi when i flash cm7 RC1 over the nordic sbf. when i go back to official 2.2 SEA there is no hassle at all. Since i live in india i was wondering if that was the issue. I can easily take care of the network problem using "baseband switcher for defy" but it still doesnt help the wi-fi problem. My question is.. will using the new BOOTSEA nightly solve this problem. I am assuming from the name is boot"SEA" im assuming its built southeastasia specific.
---> same here my wifi DL speed was really bad for the last month or so on CM7; only after BOOT179-4 install, my wifi speed somewhat got back to normal.
Fourth, ive used CM7 RC1 for a while and apart from the wifi issue i got problems with camera and video... it absolutely doesnt work, wether it be in potrait or landscape or whatever setting... the app just force closes. Any fixes for that.. ive got green lens.
---> My camera and video worked on RC1 (and earlier) but video recording had some chopiness at times. Around July 11th nightly, Quarx released a camera fix (in that nightly) that solved the problem for me. But then days later, on newer nightly builds, I got the FC problem on video camera (same as you but red lens here). Then with BOOT179-4, camera was fine again and so the wifi speed; so all good for me.
--------> I really don't know what's going on with the video camera: many poeple have problems and many have it working on every nightly builds. It has been a problem from day one for Quarx on CM7-jordan... You have to try and see which build works for you I guess. And like you said, BOOT-SEA definitely looks like something you should try - many people liked it and many people say yesterday nightly is the best for them so far... so go on and have fun with testing
---> Before you do more testing though, you can always do a backup from the custom recovery so it will be easy for you to restore your current phone state -if nothing improves. I do this all the time: stock recovery factory reset, nordic flashing, RC1 install then restore my (BOOT179-4 now) backup.
Please help!!! and i hope other similar questions can be added by members here so as to make this thread an FAQ for distressed users like me.
---> I did try to help - I hope I did! If so, you can use that "Thanks" button - hehe!
---> Not sure that a thread entitled "nightly doubts" will become a very popular
FAQ thread though
Thanks
Click to expand...
Click to collapse
........................
[] AL [] said:
........................
Click to expand...
Click to collapse
thanks for all the help
There is a FAQ for flashing cm7 go and read it There is no need for threats like This
Send from my brain using Tapatalk
dumrul said:
There is a FAQ for flashing cm7 go and read it There is no need for threats like This
Send from my brain using Tapatalk
Click to expand...
Click to collapse
i went thru the whole FAQ but my doubts are regarding the nightlies which it doesnt address hence the thread.
thx for the concern though.
downloaded the BOOTSEA, but there is another file "cm7-110726-0018-BOOTSEA-Jordan.zip.md5sum" mentioned below it. ( there are similar md5sum files for all nightlies...) are they essential ? and how do i use them.
wanted to clarify before proceeding.
deathw15h said:
downloaded the BOOTSEA, but there is another file "cm7-110726-0018-BOOTSEA-Jordan.zip.md5sum" mentioned below it. ( there are similar md5sum files for all nightlies...) are they essential ? and how do i use them.
wanted to clarify before proceeding.
Click to expand...
Click to collapse
Md5 files are to verify your download is not corrupted one. Which you can compare the md5 after downloading the zip file and regenerating the md5 of downloaded file and check against the one in the server.
Sent from my MB525 using XDA App
deathw15h said:
thanks for all the help
Click to expand...
Click to collapse
No problem.
Go read here on the official CM7-jordan thread: http://forum.xda-developers.com/showthread.php?t=1033654&page=943
And from post 9429 particularily; pretty much goes in the same direction I was pointing at regarding the wifi and video camera...
How's the BOOTSEA doing for you?
The nightly ones is just the output that the ones who are working on the rom ups to us. Normally have all that part on topic that say "next version:..."
If you wanna try the nightly one, use as the *.zip that you download when got the "rc1 v2" for exemple. So wipe the phone, choose install from a zip of the sdcard and choose the *.zip, been it the rc1 or the nightly build.
The md5sum file is the one that contains the 5sum from the file. Its nornaly given when you have to download a big file and have fear to corrupt the file. If you use linux, go on terminal and type "5sum file" when file is the name of any file that you have. It will give you a big number. This is the 5sum. The *.md5sum have the 5sum of the respective *.zip nightly rom.
Sent from my MB525 using XDA App
how is the battery life with the nightly builds?
what android version is the 27/7 nightly build using? is it 2.3.5?
yup..its 2.3.5
*Copied from CM10 FAQ by RaphaelH1427.
ATTENTION: THESE BUILDS WITH KERNEL 3.0 ARE EXPERIMENTAL! QUARX IS NOT RESPONSIBLE FOR BRICKED PHONES, WORLD WAR, ALIEN INVASION, YOUR GIRLFRIEND CHEATING ON YOU OR ANYTHING!
Welcome to the support thread of Quarx's CM10.1!
[CM10.1] Android Jelly Bean 4.2 (By Quarx)
What is this thread for:
Here you can report all your problems of the Quarx's CM10.1 that you have and ask for help to see if it's solvable by others methods that doesn't include posting to the original rom thread.
This thread will be easier for him than look for all reports spreaded in the many pages of his thread, but remember, avoid flood!
Before adding your problem(s):
- Be sure to use the latest version of CM10.1! (Check here!)
- Be sure that your report is not already reported by someone, so use the search button.
Take a look here if you wanna know how to install the ROM, and few things like that: FAQ & FAQ 2 from CM10. :good:
BUG LIST:
Kernel 2.6: BT-Headset is a bit buggy, BT will not work if FM is enabled, some problems with 3G, video recording is not good.
Kernel 3.0: Low speed of USB mass-storage, display do not always wake after sleep, suspend not working correctly.
WHAT WORKS?
Kernel 2.6: Almost everything.
Kernel 3.0: SD-Card, Bluetooth, Torch, Leds, USB (all modes), HW Video decoding, Sensors, FM-Radio (only seek stations+RDS), Sound (only speaker).
WHAT DOESN'T WORKS?
Kernel 2.6: BT-Tethering, USB-Tethering
Kernel 3.0: Headset, BT-headset, FM-Radio sound, Phone, GPS, Camera, FM-TX, WiFi.
TIPS:
-Coming from CM7/CM9/CM10? Wipe Data!
-ALL BUILDS WITH KERNEL 3.0 UNTIL FURTHER NOTICE FROM QUARX ARE BUILDS FOR TESTING PURPOSES, SO IT'S NOT READY FOR DAILY USE!
-Need extra internal space? Use an Minimal Gapps! Download here. (Thanks to xinrag for the tip!)
Remember to not have a screenlock with more than 3x3 if u update from previous build , i had and couldnt put it in ...
Did a factory reset then , flashed 4.2 and gapps 4.2 , booted up first run.
Talk to speech crashes several times at first startup , baseband no good (im in Norway), very weak signal
zer0grav1ty said:
Remember to not have a screenlock with more than 3x3 if u update from previous build , i had and couldnt put it in ...
Did a factory reset then , flashed 4.2 and gapps 4.2 , booted up first run.
Talk to speech crashes several times at first startup , baseband no good (im in Norway), very weak signal
Click to expand...
Click to collapse
Quarx recommended on Facebook to wipe data before updating. And like he said, almost everything doesn't work properly. So, not ready for daily use.
update..
Cant find SD card +settings crashes when you try to access storage..
"Quarx recommended on Facebook to wipe data before updating. And like he said, almost everything doesn't work properly. So, not ready for daily use."
True , a bit early for daily use
zer0grav1ty said:
update..
Cant find SD card +settings crashes when you try to access storage..
"Quarx recommended on Facebook to wipe data before updating. And like he said, almost everything doesn't work properly. So, not ready for daily use."
True , a bit early for daily use
Click to expand...
Click to collapse
I also cannt find wifi,,,
Tjunkustc said:
I also cannt find wifi,,,
Click to expand...
Click to collapse
Searching does not work, but you can connect manually. works for me.
Are minimal GAPPS 4.2 out there yet?
@Gafanhotz Good idea to creat a new thread for 4.2 :good:
mitchum67 said:
Searching does not work, but you can connect manually. works for me.
Click to expand...
Click to collapse
For me too....
Sent from my MB526 using xda app-developers app
SD CARD can't be mount
zer0grav1ty said:
update..
Cant find SD card +settings crashes when you try to access storage..
"Quarx recommended on Facebook to wipe data before updating. And like he said, almost everything doesn't work properly. So, not ready for daily use."
True , a bit early for daily use
Click to expand...
Click to collapse
SD CARD can't be mount. me too . Defy MB525
yangvincent said:
SD CARD can't be mount. me too . Defy MB525
Click to expand...
Click to collapse
Quarx will solve that in the next build don't worry. It's not working for anyone. It's just a Demo rom so please wait until master quarx releases a daily usable rom.
Sent from my MB526 using xda premium
New unofficial version
After install some times in nany ways and settings I confirmed that new 4.2 version is good for defy hardware and custom kernel.
I still worry when Quarx2k implements the CM feautures if this is bug the rom.
But now...
1 - With or without gapps (4.2 or 4.1.2) the initial settings show erros.
2 - GSM signal is very weak, but phone tottaly functional.
3 - Widgets are not full sized on screen ( all go to left on screen).
4 - Phone with lot of memory and flows very good.
Where can I download gapps 4.2?
I hope the data dropouts i have in CM10 will be solved in CM10.1 but dont have my hopes up to high because they been there so long now that i dont even know when they started, might have been already on CM9 but im not sure.
Another thing that worries me a bit is that the system space is not big enough while internal storage atleast for me is on over 1GB, possible to make the system space bigger?
Cheers?
morteza-25 said:
Where can I download gapps 4.2?
Click to expand...
Click to collapse
Read the first post of CM10.1 of Quarx2k in Development Section
FlashTec80 said:
I hope the data dropouts i have in CM10 will be solved in CM10.1 but dont have my hopes up to high because they been there so long now that i dont even know when they started, might have been already on CM9 but im not sure.
Another thing that worries me a bit is that the system space is not big enough while internal storage atleast for me is on over 1GB, possible to make the system space bigger?
Cheers?
Click to expand...
Click to collapse
We can't resize system rom, because we have locked bootloader & i think 2ndboot will not help. Solution - unistall not need system apps, hint: unistall CMWallpapers - it will free about 10MB in SROM
Could this app solve the SD problem?
http://forum.xda-developers.com/showthread.php?t=1652079
Gafanhotz said:
Quarx recommended on Facebook to wipe data before updating. And like he said, almost everything doesn't work properly. So, not ready for daily use.
Click to expand...
Click to collapse
can you send me the facebook link? thanks!
sorry for off topic
Why quarx named cm 10.1 as unofficial build but cm 10 is also not official but he dint named it as unofficial builds.
mothy1025 said:
sorry for off topic
Why quarx named cm 10.1 as unofficial build but cm 10 is also not official but he dint named it as unofficial builds.
Click to expand...
Click to collapse
What's the point of this question??
You are in a stupid confusion!
Both are UNOFFICIAL ( Who cares though )
I don't want a tapatalk sig!
My laptop blew up a capacitor, i have twrp 2.6 x x i we need 2. 7 x x for cm11. Is there a way to update without a pc ?
Download it on the kindle, flash the zip from inside of twrp, reboot into twrp again and you will notice the version is newer. If you have issues downloading the zip on your kindle just tell me I could temporarily host it somewhere for ya.
Sent from my Amazon Kindle Fire HD using Tapatalk
aakashba1001 said:
My laptop blew up a capacitor, i have twrp 2.6 x x i we need 2. 7 x x for cm11. Is there a way to update without a pc ?
Click to expand...
Click to collapse
you can download HashCode's TWRP Here:
http://forum.xda-developers.com/showthread.php?t=2218802
and install from your current TWRP, just as you flash a ROM.
Thanks guys
thanks both of ya, one last question.
for the official cm11 release, the nightly mean u guys keep wiping and installing new os everyday ?
Is there any older release with no bugs ? If they did nightlies for older versions, one of them must have all bugs fixed right ?
aakashba1001 said:
thanks both of ya, one last question.
for the official cm11 release, the nightly mean u guys keep wiping and installing new os everyday ?
Is there any older release with no bugs ? If they did nightlies for older versions, one of them must have all bugs fixed right ?
Click to expand...
Click to collapse
CM nightly build works good for me, you don't need to wiping new buld everyday, just choise one.
CM team will release a new month build every month, that build will be better than nightly build.
It takes time for the CM team to build a ROM with no bugs, so, just be patient.
I installed the 4/14 unofficial CM11 build that Hashcode posted over in development and am stunned at how well it works! I'll be sticking with this one for the interim. The TWRP upgrade is necessary, but Hashcode made it easy (see link in gatalon's post). In my case, I think it may have even fixed a long standing issue I had.
I've had my kindle HD 8.9" for over a year now, and have always been disappointed with it's performance. Even after I rooted it and put the CM10.1 build on it, it still exhibited weird sluggish, unresponsive behavior. This upgrade to TWRP 2.7 and CM11 has made all the difference in the world. All the weird sluggishness is magically gone.
It was noticeable as soon as I used TWRP 2.7 to wipe everything out. I'm half suspecting I had something wonky going on with the file system that wasn't getting addressed with the older version of recovery. I noticed 2.7 explicitly states that it's calling mkfs during the wipe process where the older version didn't. My uneducated theory is that the older version, 2.6.0.0, just deleted everything where the newer version is actually re-formatting the partitions. I could be way off base though. Just happy it's finally working like I thought a piece of hardware like this should! :victory:
aakashba1001 said:
thanks both of ya, one last question.
for the official cm11 release, the nightly mean u guys keep wiping and installing new os everyday ?
Is there any older release with no bugs ? If they did nightlies for older versions, one of them must have all bugs fixed right ?
Click to expand...
Click to collapse
No wipe is needed (normally) when updating from one CM official nightly to a subsequent one. It will even detect if the engine has changed and recompile the davlik cache as needed. Personally, I'm a big fan of wiping cache (and only cache) with each new build and I also install any update PA GApps when available ( http://forum.xda-developers.com/showthread.php?t=2397942 ).
Caveat emptor: The CM team makes ever effort to make builds backwards compatible, but always take a backup and be prepared to do a factory reset / data wipe. It very rarely is needed, but you don't want to need a backup and not have one!
If the problem hasn't already been solved, here is an alternative: fireflash. Look it up.
Sent from my Amazon Jem using Tapatalk
Hello all
I went back to the p900, but only for a short time. My friend from the neighboring country gave me P900 for a few weeks. After 10 days of hard work, I made the first 6.0.1
Thanks
bonuzzz - my friend, thank you for the tablet. thanks for the support and help during the entire time working on 6.0.1
Schischu - thank you very much, this is realty great job on creating aosp for tab s series
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
Instructions
1. Install custom recovery
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Reboot recovery
6. Flash firmware
7. Flash gapps
Known Issues
Bluetooth
Camera
Old working gapps: open_gapps-arm-6.0-micro-20160106.zip: https://drive.google.com/file/d/0B-6nm7Jks0W5TndJQ09HR0JDRTA/view?usp=sharing
Gapps - if you get "Unfortunaly, Setup Wizard has stopped" on first cm load. This is common problem.
Try find older version: 22 March or early (my link). Or you can delete Start Setup app: go back to twrp - Mount -> system, then Advanced -> File Manager -> system\priv-app\SetupWizard - select current folder and delete. Then reboot in system.
Links
6. 20160406: the April update of the Google Security systems: https://drive.google.com/file/d/0B-6nm7Jks0W5QVVwSHV5RUgxUmc/view?usp=sharing
5. 20160401: https://drive.google.com/file/d/0B-6nm7Jks0W5bWJfZjZuME9Gcms/view?usp=sharing
4. 20160331: https://drive.google.com/file/d/0B-6nm7Jks0W5VTJfdWdma1FFb0U/view?usp=sharing
3. 20160330: fix sdcard, gps: https://drive.google.com/file/d/0B-6nm7Jks0W5bVBJR3VFMXEwVWc/view?usp=sharing
2. 20160330: first cm 13.0 build: https://drive.google.com/file/d/0B-6nm7Jks0W5YUhROVNBN1dacG8/view?usp=sharing
1. 20160329: first aosp 6.0.1 build: https://drive.google.com/file/d/0B-6nm7Jks0W5NEZCMmROb2dQSHM/view?usp=sharing
Gapps
http://opengapps.org/
Platform: ARM
Android: 6.0
Sources
cm13.0 branch, in readme file (see device tree) all instructions for build.
CyanogenMod: https://github.com/CyanogenMod/
AOSP: https://github.com/Schischu/
Device: https://github.com/Valera1978/android_device_samsung_v1awifi
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos5420
Vendor: https://github.com/Valera1978/android_vendor_samsung_v1awifi
Camera issues when using the default camera app, or is it a hardware issue? I use the camera fairly often.
@Valera1978 Awesome work my friend! Congrats for one more wonderful work! You rock!
Thanks, I'm gonna try it.
Valera1978 said:
Hello all
I went back to the p900, but only for a short time. My friend from the neighboring country gave me P900 for a few weeks. After 10 days of hard work, I made the first 6.0.1
That's fantastic news @Valera1978 ! Was thinking of trading this machine in because lack of development. But in the same time I love it. It's a brilliant device and it's a pity so few people has found that out. So THANKS A MILLION Valera!
Click to expand...
Click to collapse
Huray. You are awesome.
I went back to the p900, but only for a short time. My friend from the neighboring country gave me P900 for a few weeks. After 10 days of hard work, I made the first 6.0.1
Click to expand...
Click to collapse
Are you going to work more on it? Because you have it for limited time, will be there someone else to continue?
Kubas_inko_CZ said:
Huray. You are awesome.
Are you going to work more on it? Because you have it for limited time, will be there someone else to continue?
Click to expand...
Click to collapse
The p900 will be available till end of the weekend, may be the next week also.
My plan simple - push another developers to continue work with cm13. In this limited time I want:
- make stable cm13 - building right now, hope today evening will be the first results
- clean-up my device/kernel/vendor (almost done)
- try fix camera - look like this is big issue for all exynos cm13 devices, but need at least try fix
And then I really hope thompatry will continue work with cm13.
And hope my sources will help make cm for related note pro 12.1 p901 and tab pro t900/t520. At least t900/t520 use the same kernel and very similar hardware.
Buggy Setup Wizard
How can I skip the buggy Wizard? It keeps popping up error messages.
My tablet was always diferent. I wasnt able to update to official lollipop (stuck on boot animation or every proces crashed) Cm12 is laging. And now, the android 6.0.1 is stack at boot screan animation. I also bricked it with official lollipop (from cm11 to official lollipop) and unbricked it with official kitkat. I really dont understand it. I need to do more with my little android development skills (i have successfully ported cm11 to friends phone, but only thanks it have little difrences from the official cm11 for the supported device) i dont know if u understand it but it doesnt matter
No way!! I wasn't expecting this.
I don't like posting this kind of useless message but I had to write a big THANK YOU. The thank you button doesn't cover how grateful I am for bringing a 6.0 ROM to our big guy.
Does the s-pen work? I can't flash it right now.
GRellinas said:
How can I skip the buggy Wizard? It keeps popping up error messages.
Click to expand...
Click to collapse
Sorry. I forgot to thank you for your work.
Please help me solve this problem with the buggy setup wizard. It keeps coming and I can't do anything .
GRellinas said:
Sorry. I forgot to thank you for your work.
Please help me solve this problem with the buggy setup wizard. It keeps coming and I can't do anything .
Click to expand...
Click to collapse
I had the same problem. Couldn't get past it. So I did a new clean install and this time without Gapps. The rom runs fantastic. Went to apk mirror and downloaded the latest GMS and installed it. Then I went to settings to add my G account. And couldn't go thru with it cause GMS keeps crashing. Don't know why. Gonna uninstall it now and install an older GMS
---------- Post added at 08:25 PM ---------- Previous post was at 07:40 PM ----------
thools60 said:
I had the same problem. Couldn't get past it. So I did a new clean install and this time without Gapps. The rom runs fantastic. Went to apk mirror and downloaded the latest GMS and installed it. Then I went to settings to add my G account. And couldn't go thru with it cause GMS keeps crashing. Don't know why. Gonna uninstall it now and install an older GMS
Click to expand...
Click to collapse
Edit: Tried an older variant of GMS and no success. Well just have to wait. Meantime its awesome running MM on what I thought was a dead device.
Thank you for this Valeria. Really appreciate you doing this. I've encountered most of the problems previously mentioned. Installed with Gapps. No joy. Did another install without. Running OK. One thing nobody else has mentioned is I can't see my external sdcard. Tried 3 different ones. 32, 15 and 4 GB. No luck with any. As for ROM. Nice. Fast. Smooth. Cheers
Cm 13.0 build is ready. Please see first post how to solve gapps problem. Tomorrow I'll check what is wrong with gapps. And then I'll start fix small problems. Still a lot of work, but now with working cm.
Wanted to first say I'm extremely grateful for your work; I've been keeping an eye on the CM threads here for weeks because this upgrade could make the P900 work like a new tablet.
I rely on it daily for college, so I'm kind of hesitant to flash just yet. But for those of you who try this ROM, I'd be very interested to know:
1) S-Pen -- For a separate S-Pen (the one with a separate eraser in addition side button), do the extra buttons work natively in LectureNotes or similar apps or does something else (e..g, "CM S Pen Add-on") need to be installed?
2) Encryption -- Does encryption/decryption work with TWRP 3.0.0.0 (or an earlier version)? Haven't had much luck getting TWRP to decrypt 5.0.2 stock, but as long as the OS can decrypt -- and I've been able to make backups -- I haven't worried about it.
3) Multi-Window -- In CM13, how adjustable are the windows? Can you achieve a setup where 2/3 of the screen is for one app while another app gets 1/3?
4) Camera -- Is it just the stock camera app that's having trouble? Would another app (e.g., Open Camera) work?
5) Microphone -- Is the mic working okay (e.g., for an app like LectureRecordings)?
6) Screenshots -- Is there a good solution for editing screenshots? Something that supports S-Pen? Being able to quickly crop and import things into LectureNotes is very useful. Noticed a new app called "Screen'it" in the store that might eventually be a good stock replacement, but I'd like to know if anybody's got a better solution.
Thanks so much for this! Just installed CM 13.0 build. Tried stock gapps 6.0 it failed. BUT....
Here is one *provisional* solution (you'll do better I'm sure) for the gapps setup wizard problem.
*Install the March 22 pico version.*
Of course, factory wipe.
Then follow the old school method and do both of these in ONE twrp session:
Flash CM 13.0 Marshmallow
Flash gapps 3/22 Pico
Wipe dalvik
Reboot
And you should be good to go!
This came up with another (older) tablet of mine, the Asus TF700t, which also returned the error when I first loaded a custom MM 6.01 version. That developer (Timduru) suggested using the March 22 Pico version of the gapps and it worked there.... and as I speak is now working on my Samsung Note Pro 12.2. I've not done anythng much with it yet, but will get back to you with anything I find.
Hope this is useful.
Blessings.
Okay... No Bluetooth. [Oops, correcton, Blue tooth *does* work.] No external sdcard. But very fast. Thanks and looking forward to usable version.
shonkin said:
Thanks so much for this! Just installed CM 13.0 build. Tried stock gapps 6.0 it failed. BUT....
Here is one *provisional* solution (you'll do better I'm sure) for the gapps setup wizard problem.
*Install the March 22 pico version.*
Of course, factory wipe.
Then follow the old school method and do both of these in ONE twrp session:
Flash CM 13.0 Marshmallow
Flash gapps 3/22 Pico
Wipe dalvik
Reboot
And you should be good to go!
This came up with another (older) tablet of mine, the Asus TF700t, which also returned the error when I first loaded a custom MM 6.01 version. That developer (Timduru) suggested using the March 22 Pico version of the gapps and it worked there.... and as I speak is now working on my Samsung Note Pro 12.2. I've not done anythng much with it yet, but will get back to you with anything I find.
Hope this is useful.
Blessings.
---------- Post added 30th March 2016 at 12:33 AM ---------- Previous post was 29th March 2016 at 11:44 PM ----------
Okay... No Bluetooth. No external sdcard. But very fast. Thanks and looking forward to usable version.
Click to expand...
Click to collapse
Thank you.
Yes, you are right, something wrong with the latest gapps. On p905 with latest gapps we are geting the same start wizard problem.
I finished the firmware late at night and had no time to check the different gapps.
Today will be full test and cleanup.
Remove sertupwizard from /system/priv-app to skip wizard. You can do it with twrp file manager
There is rallye no bit different betwene android 5.1.1 (cm12.1) and android 6.0.1 (cm13). The only one i really like is multi window. But still awesome work Valera.
---------- Post added at 11:46 AM ---------- Previous post was at 11:43 AM ----------
Can it be gaps version problem? Because i use micro and have no problem with it. (Yet)
Valera1978 said:
Thank you.
Yes, you are right, something wrong with the latest gapps. On p905 with latest gapps we are geting the same start wizard problem.
I finished the firmware late at night and had no time to check the different gapps.
Today will be full test and cleanup.
Click to expand...
Click to collapse
shonkin said:
Thanks so much for this! Just installed CM 13.0 build. Tried stock gapps 6.0 it failed. BUT....
Here is one *provisional* solution (you'll do better I'm sure) for the gapps setup wizard problem.
*Install the March 22 pico version.*
Of course, factory wipe.
Then follow the old school method and do both of these in ONE twrp session:
Flash CM 13.0 Marshmallow
Flash gapps 3/22 Pico
Wipe dalvik
Reboot
And you should be good to go!
This came up with another (older) tablet of mine, the Asus TF700t, which also returned the error when I first loaded a custom MM 6.01 version. That developer (Timduru) suggested using the March 22 Pico version of the gapps and it worked there.... and as I speak is now working on my Samsung Note Pro 12.2. I've not done anythng much with it yet, but will get back to you with anything I find.
Hope this is useful.
Blessings.
---------- Post added 30th March 2016 at 12:33 AM ---------- Previous post was 29th March 2016 at 11:44 PM ----------
Okay... No Bluetooth. No external sdcard. But very fast. Thanks and looking forward to usable version.
Click to expand...
Click to collapse
You're absolutely right. Installed open Gapps 0322 Pico and no problems with GMS. Restoring all my apps now. Tried with Pico Gapps 0330 first but no luck. Thanks for your tip ?
CM-14.0 UNOFFICIAL for Find7 by Wuxianlin
This is only for chinese storage unification(havent test yet in other storage layout)
FLASH IN YOUR OWN RISK IM NOT RESPONSIBLE FOR YOU ALL GONNA DO...!!!!
Builds being update in the second post...
Chinese unification, nice tutorial made by @alexander Tashi -> here
This is for Find7a but work on Find7s to
This is for chinese storage partition(Only test in this layout), and i dont know if it work on other layouts like Stock/LVM/Coldbird, you all have to test it for yourselfs
The daily base work
GPS
WIFI
4G/LTE
COMPASS
and others...
BLUETOOTH can detect and connect but the sound is yet came out from the phone...
I have flash oppocamera work less the HDcamera
Flash the A.R.I.S.E. AUDITORY RESEARCH IN SOUND ENHANCEMENT work(havent test yet maxxaudio)
You can use has daily driver...
Ps.: since this use CM kernel is possible that you may have reboots... :\
New build:
cm-14.1-20161127-UNOFFICIAL-find7 / MIRROR
cm-14.1-20161201-UNOFFICIAL-find7
please correct link to chinese storage partition guide
and the mega links in initial post (they do not work!)
der_Kief said:
please correct link to chinese storage partition guide
and the mega links in initial post (they do not work!)
Click to expand...
Click to collapse
Working now....
Awesome! I'm trying
Ok so I tried this rom finally! Here's my feedback:
First of all I'm a bit confused why is this called cyanogenmod 14, because its not cm. It looks like the vanilla aosp from a one plus device or maybe nexus. It has no cm features.
Secondly like stated in the op this is indeed for chinese storage. I can confirm lvm does not work.
Stock gallery does not show all the picture folders. However quickpic from playstore works fine.
Music players can't detect songs on my sd card. But I can play them from file explorer.
I didn't test bluetooth for now.
Other than these things, this is really smooth and stable for an initial test build. So kudos to the dev for bringing N so quickly for our devices! You can use this as a daily driver
DemonDroid_97 said:
You can use this as a daily driver
Click to expand...
Click to collapse
you should be carefully with such a statement
DemonDroid_97 said:
...
First of all I'm a bit confused why is this called cyanogenmod 14, because its not cm. It looks like the vanilla aosp from a one plus device or maybe nexus. It has no cm features. ...
Click to expand...
Click to collapse
This this builds are made with cm kernel and little by little they start to have the CM features heheheheh
der_Kief said:
you should be carefully with such a statement
Click to expand...
Click to collapse
For me has daily driver or minimum requirements for use phone at least they need to have GPS/LTE/WIFI and that 3 thinks are working and im using for 3 days
New build is UP for download in the 2nd post
cm-14.0-20160905-UNOFFICIAL-find7.zip
EDIT: It seems the dev add camera, music player and audiofx to this build
Is supported new LCD?
Injected said:
This this builds are made with cm kernel and little by little they start to have the CM features heheheheh
Click to expand...
Click to collapse
A question about chinese unification: after installing the ROM, do I need to install the unified partition patch for CM based ROM's?
Thanks for your help.
javier.pc said:
A question about chinese unification: after installing the ROM, do I need to install the unified partition patch for CM based ROM's?
Thanks for your help.
Click to expand...
Click to collapse
NO, you dont need, beucase this rom already made for chinese partition
other than mega?
harsaad said:
other than mega?
Click to expand...
Click to collapse
I can try put google drive....
im from omni.. with LVM... this rom not supported LVM?
eureka9092000 said:
im from omni.. with LVM... this rom not supported LVM?
Click to expand...
Click to collapse
No.... This only for chinese storage partition
How can the phone be formatted for the chinese storage partition? I've tried to follow the guide however there are dead links for the tools required
mada360 said:
How can the phone be formatted for the chinese storage partition? I've tried to follow the guide however there are dead links for the tools required
Click to expand...
Click to collapse
All links working fine from here
http://forum.xda-developers.com/showpost.php?p=64149659&postcount=3
DemonDroid_97 said:
All links working fine from here
http://forum.xda-developers.com/showpost.php?p=64149659&postcount=3
Click to expand...
Click to collapse
Looks like the Russian one is working for me, hopefully it doesn't stop mid download! Thanks for your help
Just to confirm process from RR with LVM would be;
1) Use tools to perform chinese unify (Should wipe entire device)
2) Flash TWRP
3) Flash the new CM14 Rom, gapps and all that good stuff
4) Profit???
Ok well I'm flashing the rom now and everything has gone through without issue! the tool only took about 2:50 for me.
For anyone trying to get English in twrp, second from bottom on the right and then select the globe icon at the top
Please, can someone explain the difference between chinese storage partition and LVM? Not technically, of course. I want to know about partitions and their sizes.
Thanks again.
javier.pc said:
Please, can someone explain the difference between chinese storage partition and LVM? Not technically, of course. I want to know about partitions and their sizes.
Thanks again.
Click to expand...
Click to collapse
From what I can tell the LVM method is a linux storage method that allows data to be stored in a varying sized partition by allowing on the fly resizing. The chinese method of dealing with the sotorage partition looks pretty much the same, if you look at the free app storage space it will be only around 100mb or less, but as you install more apps more space is allocated so it appears there is the entire device storage available.
I would assume the only difference would be in the way the Rom sees and interacts with the device storage. But on the most part there doesn't seem to be any real world issues, everything seems to work great and I wouldn't know it wasn't running on the LVM partition.