Develop Bugs

Button-Backlight ISSUE

So the problem is when i go into certain apps and then
A) Press sleep
B) Quit (by pressing back button)
The soft-key/button backlight on Samsung Gio stays on BUT the screen will go off if i press sleep.
-The button-backlight DOES NOT turn of even when its been in sleep mode foor an hour
Any help will be Appreciated
THANK YOU

Solution!
Rooted devices and install GioKlight app, or open "/sys/class/leds/button-backlight/brightness" file on text editor and replace "255" to "0" for advanced user

Do you use stock rom?
Or a custom rom?

[Q] Demigod crash Handler

hey. i get this error on any rom except stock. anyone know solution?
DemiGod Crash Handler : Kernel Crash! :
Press key to choose Dload Mode/Reboot/Fastboot
1)Volume Up: Dload Mode.
2) Volume Down: Reboot.
3) Power: Fastboot.
If you choose Dload Mode,
Please do following action.
1)Dload Mode. Please connect USB
2) Get the ram dump image using QCT's Memory Debug App
3) Send em-mail to contact point or [email protected].

anyone?? i cant use custom rom.

tskjoe said:
anyone?? i cant use custom rom.
Click to expand...
Click to collapse
Yes u can that is because of the kernel, I was using vanir rom and I had it twice until I updated to KK. Flash any KK rom and you'll see. Im running cm11 official and it is ok

tskjoe said:
hey. i get this error on any rom except stock. anyone know solution?
DemiGod Crash Handler : Kernel Crash! :
Press key to choose Dload Mode/Reboot/Fastboot
1)Volume Up: Dload Mode.
2) Volume Down: Reboot.
3) Power: Fastboot.
If you choose Dload Mode,
Please do following action.
1)Dload Mode. Please connect USB
2) Get the ram dump image using QCT's Memory Debug App
3) Send em-mail to contact point or [email protected].
Click to expand...
Click to collapse
My LG Optimus G has same problem like this.
I can't go to download mode.
How to resolve? thanks

My LG Optimus G E975 crushes once a week.
I have the same issue with my LG E975 Optimus G,
My phone running last Mokee version ROM and it crashes once a week.
Please assist.

i use an e973,i had a couple similar crashes using pac rom,googled a bit,and i increased the min cpu speed to 486,and i have not had a crash since.
fwiw that has worked for me

LG G3 GreenScreen Error / Endless Loop Boot (demmigod Crash Handler : HW Reset!)

occurrence : 2015.7.18 (south korea)
reason : toshiba emmc crash!
movie : youtube search (lg g3 Greenscreen Error)
GreenScreen Error Message
----------------------------------------*-------
HW Reset!
----------------------------------------*-------
DEmiGod Crash Handler : HW Reset!
Press key to choose Dload Mode or Reboot.
1) Volume Up : Dload Mode.
2) Volume Down : Reboot.
If you choose Dload Mode,
Please do following action.
1) Dload Mode. Please connect USB.
2) Get the ram dump image using QPST Configuration.
----------------------------------------*---------

Galaxy Note 3 Wont Boot

So I was watching a show on my tablet. and then the tablet just froze. I tried to reboot it. and the screen just stays stuck at the Samsung Load screen. I have Team Win Recovery installed on it. So I used the commands to get into it. and see if I could reboot and reset through there. But when I go to reboot it tells me my System has no OS do I still want to reboot, reset or whatever I try to do.
My PC isn't recognizing my device. So I can open it up at all. I did not have a SD card in my Tablet. but I do have one in my phone and it does fit into my Note III so I believe it should/would work for any steps I may need to do to help fix this problem. Any ideas or suggestions on how to deal with this?

I've seen this before...
...THIS MAY OR MAY NOT work (CAPS for emphasis only).
The way we solve that because the symptoms you are describing are often the result of a corrupted cache that effects that startup of processes in the background. Clearing the cache might help if the following doesn't work, but don't clear it first because going through this process sometimes requires that whatever data is in the cache remain undisturbed...
(Remember, Android is just a portable version of Linux).
Part 1 of 2 - Enter Safe Mode (ignore all other directions except for using the hardware keys to enter safe mode)
Safe mode
Turn on and use safe mode
Safe mode allows you to turn on the device with third-party apps disabled. Then you can easily remove all apps that may be causing a conflict or software problem.
To turn on safe mode and use it to fix app problems, follow these steps:
Turn on safe mode
Turn the device off.
Press and hold the Power key.
When 'GALAXY Note 3' appears on the screen, release the Power key. Immediately after releasing the Power key, press and hold the Volume down key.
Continue to hold the Volume down key until the device finishes restarting.
'Safe mode' will display in the bottom left corner of the screen. Release the Volume down key when you see 'Safe Mode.'
Uninstall third party applications
Turn on Safe Mode.
From any Home screen, tap the Menu key.
Tap Settings.
Tap the General tab.
Tap Application manager.
If necessary, swipe right to the Downloaded screen.
Tap the desired application.
Tap Uninstall and then tap OK.
Turn off safe mode
To turn off safe mode, follow these steps:
Press and hold the Power key.
Tap Restart.
The same steps are located on the following URL for entering Safe Mode:
https://support.t-mobile.com/docs/DOC-9049
Part 2 of 2 :
If you were successful in engaging Safe Mode, it is more than likely you will see an option screen come up that lists "TouchWiz" , KNOX (Possibly, and varies depending on your config and KNOW Counter Status {i.e. "0x0" or "0x1}, and TouchWiz Simple.
Please pick TouchWiz and DO NOT pick TouchWiz Simple.
Your Note 3 should then start without incident; however we would recommend you backup your data and reload your device with fresh installs as soon as possible.
Hope this helps.

The Tablet wont even boot up into Safe Mode. the Tablet doesnt boot at all. It just stays stuck at Samsung Galaxy Tab 3 screen.
I can use the hard keys to enter into Odin Mode and Team Win Recovery thats it.

Thanks for clarifying. Different steps will be required then. Be careful, and read the other two links carefully that are listed in order of importance to get your Note 3 back up and running:
[Step 1]
Hardware reset using Hardware Buttons ( You WILL LOSE ALL OF YOUR DATA {CAPS for emphasis only} )
Master reset with hardware keys
A master reset restores the original factory settings and may delete your personal data on the internal storage, such as downloaded content, ringtones, images, apps, and contacts. It does not delete data stored on the SIM card or SD card.
If the device menus are frozen or unresponsive, you can master reset using hardware keys. To perform a master reset, follow these steps:
Back up all data on the internal memory.
Turn off the device.
Press and hold the following three buttons at the same time:
Volume Up key
Home key
Power key.
When 'GALAXY Note 3' appears on the screen, release the Power key but continue to press and hold the Volume Up key and the Home key.
When the Android System Recovery screen appears, release the Volume Up and Home keys.
Press the Volume down key to highlight 'wipe data / factory reset.'
Press Power button to select.
Press the Volume down key to highlight 'delete all user data.'
Press Power button to select and start the master reset. When the master reset is complete, 'Reboot system now' is highlighted.
Press the Power key to turn the restart the device.
Directions also featured on the following URL: https://support.t-mobile.com/docs/DOC-9049
[Step 2]
Forget about ODIN and you can use Heimdall with the build of your choice provided it is supported by the BootLoader (i.e. KitKat BootLoader will not load JellyBean).
The instructions are in the following URL as are links to the appropriate software:
http://forum.xda-developers.com/showthread.php?t=2545009
IMPORTANT NOTE: DO NOT WASTE YOUR TIME WITH A USB3 Cable. Instead use a USB2 cable because USB3 connections via the Note 3 have been known to not be the most stable, and you will receive much more reliable connectivity using USB2 that is essential to the reload process.
Hope this all helps, and please let us know how successful you were.

Phone can not boot after updating ASUS UI UPDATE

Phone : 550ML
Yesterday (2015/12/21, India Time) i got notification about ASUS UI update, I downloaded the updates and press install button, then system automatically got shutdown and not restarted.
Right now when i click on Power button, it shows only battery charging ICON.
I checked the support on http://www.asus.com/support/FAQ/1006346. But dont know how i can solve it. I also checked this forum http://forum.xda-developers.com/zenfone2/help/phone-wont-boot-update-t3126603
please help me to sort out this issue
Thanks
Harry

Hi dude,
If you push on start button for a long time, do you have any vibration ? If not, did you try to start in recovery mode again (start button and volume up ?).