i have this rom,
http://forum.xda-developers.com/gal...m-miui7-smoothfasterotamultilanguage-t3178851
but i have a new phone in this one i like to a stock rom so the TV OUT works again,
i have download a stock rom opent odin and added to the pda file but then i got error Complete (Write) operation failed.
can somewane help me to get back to a rom with TV OUT ?
sorry for my english thanks for reading this,
Flashing stock
Hello,
Download:
Odin 3.10.6
Connect you phone to your PC and then start it into download-mode.
Download-Mode:
Power off the Note 2
Press Power, volume-low and home at the same time
Confirmthe warnings using volume-up
Add the ROM to AP in Odin and press start. If you get a PASS, your ROM is successfully installed.
If you get a ERROR, please post the log in
Code:
-Tags here: [IMG]http://forum-lw-1.xda-cdn.com/images/2015/editor/code.png[/IMG]. And also send me a link to your stock ROM.
Kind regards
Trafalgar Square
first thanks for ure help,
this is what i get
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100ZCUEOK1_N7100CHNEOK1_N7100ZCUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
i found this rom N7100ZCUEOK1_N7100CHNEOK1_N7100ZCUENB1_HOME.tar
Please uncheck the repartition in Odin. Then try again.
Like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
Its not working for me, i get this in Odin after following his guide on Youtube.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MD5 hash value is invalid
<OSM> SPH-D700-EH17-8Gb-REL.tar.md5 is invalid.
<OSM> End...
try removing the .md5 from the end of the file
DCRocks said:
try removing the .md5 from the end of the file
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> 7z¼¯'
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
So he said try a new cord / try without the sd card/ different usb port and i took out the sd card and got a new cord, now im waiting to see if it will work right now its just on "setup connection" ...wish me luck
Edit: Noticed the picture i posted said com3. Now it says com4.
EDIT: Thank god, finally got it working, basically i just installed winrar, unzipped the file he had us download, then unziped the mda5.rar file and used the unzipped file within that
now i have to root -__-
wow i was goig to say add the pi file but i guess if you successfully added it with no plob then we dont need it to begin with?! great job, Iknow those rar'd md5 or other zipped files that have the same name are hard to uncover but thats why ts good to view them before adding to odin and flashing! just to be sure!
Hey guys so I was trying to root this brand new S3 and well in Odin This happened
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
During recovery it failed..whats wrong?
also this page
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If your phone is model SGH-T999, flash this: http://db.tt/vaN5mLML Edit: misread post, disregard.
What are you trying to flash? Link to the file please.
Thanks.. I cant post the link new user...but its the CF Root for the SGS3- V6.3
It happens to fail after the Nand writes evrytime
Ok, try to flash the file I linked, then. If that works, and you can access recovery (vol up+home when device is turned on), you can flash the Superuser zip from my signature. Then you will be rooted.
Also, use the Odin in my signature.
Before you posted that I flashed the clockwork and it make the S3 work...I tried to turn on recovery didnt work..
When the device is off, hold vol up + home + power. When phone vibrates, release power button while still holding the other two. If the recovery flash succeeded, you are not entering the proper key combo at the right time.
THANK YOU
Thank you SO SO SO SO SOOOOOOOOOOO MUCH It works perfectly and is rooted with super user acsess while your here with your absolute genious do you know of anyway I can unlock it from here?
Hello, im having problems to update my P605m on oficial kitkat without root using Odin and Germany ROM this is the message i see on tablet:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
On Odin give the error: <ID:0/006> FAIL! (Auth)
Any help? Thanks!
Please can anyone help me? I tried another fw, Odin:
ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks... =/
Same problem here ..... tried everything, running out of tricks ......
[email protected] said:
Same problem here ..... tried everything, running out of tricks ......
Click to expand...
Click to collapse
I just see yr message now, but i was able to flash by using a rom from other region, my tablet is a p605m lte, so i used a Southamerica rom and its work perfect, i was trying to use a rom from europe, like german rom,and it was not working. I think the tablets are the same, but have some lock to void install roms from diferent region...
Heimviado de um LG-G3 usando TeTaTalk
I have a Samsung SM-T111:
running 4.2.2
baseband version: T111XXUAPA1
Kernel: 3.4.-2878357
Build no JDQ39.T111XXUAPA1
***UNROOTED*** (Trying to root but I can't)
I tried to flash CWM and TWRP with Odin and here is the latest log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T110.CWM.v6.0.4.8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Added!!
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> recovery.img
<ID:0/015> NAND Write Start!!
<ID:0/015> RQT_CLOSE !!
<ID:0/015> RES OK !!
<ID:0/015> Removed!!
<ID:0/015> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Odin keeps saying "REMOVED" and the top right block on the UI says "RESET" and "PASS" immediately
I then installed the CWM ROM Manager and it has verified that CWM and TWRP recoveries are installed but every time I try to boot into recovery i see NO COMMAND / ERROR with a dead android mascot and the stupid Android recovery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I need to root this device and load lollipop or marshmallow . I've been struggling for the past week but i ain't giving up though i'm close to giving up. Any help will be appreciated
I've gone through many threads about my problems and i've been unsuccessful.
I'm based in South Africa (GMT+2)
Thanks in advance
My GT-N7100 (Note 2 international) completely destroyed itself somehow.
Whenever I try to boot the system or recovery, it freezes while showing colorful pixels (like it wants to show me the LED panel or something like that).
To my suprise it's not sudden death syndrome (as I had with my other Note 2 before) as one thing is still working:
Download Mode.
Here's a screenshot of the shown information:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
However I can't do anything. When I try to flash TWRP (twrp-3.0.2-0-t03g.img.tar) with Odin (tried all Odin versions) it FAILs with the following error:
Code:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Can anyone help me?
Same issue here.
These phones going dead seems like a common issue.
3/4 of my Note 2 have lost their ability to do anything but boot into download mode within the past year.
I have tried to do lots of work with Odin, but can't find a path forward.
Partition issue
NAND writing issue
What else is there to do?