UPDATED WITH REVIEW:
In-depth review below, will update in a few days to cover DLNA support and revisit Miracast experience while at home (currently discussing the experience at a university)
The PTV Miracast adapter works as advertised, but isn’t perfect. Miracast functionality works like a charm, but with the same slight delay in most other adapters out there. AirPlay is listed as a feature, but don’t expect it to work. Upon opening the package, I was greeted with a matte black, rubbery dongle that was slightly larger than a USB thumb-drive. Under the cap is the HDMI plug, on the other end are two micro USB ports -- one for power and one to connect a storage drive. On one side of the USB end is a tiny button that doesn’t clearly indicate it’s purpose, but is meant to switch between Miracast connectivity and AirFun mode (see below).
Using this adapter isn’t as intuitive as I would like it to be, but it does work. When you initially plug the device into the HDMI port of the TV and USB power, you’re greeted with the AirFun screen, which is green and black. This screen displays the dongle’s IP address, a url containing the IP address and ending with “/remote,” and what network it’s connecting to. When no network is available, it turns itself into it’s own wireless network to allow you to connect. Visiting http://ipaddress/remote takes you to a web-based remote for the dongle to set it up and control the DLNA features of the device. When connecting to this address from an Android device, it prompts you to download the app for this same control. The app is called AirFun and CORRECTION: is in the Play Store - https://play.google.com/store/apps/details?id=com.realtek.airfun.client. The app appears to be stored on the dongle itself also. Don't worry much about this app after you've adjusted the settings to your liking. Use another DLNA app for your media, MirrorOP if you wish to take advantage of that, and wait on AirPlay.
Connecting the dongle to wifi is easy, but the first step isn’t apparent. You must first connect your phone or tablet to the wifi hotspot the dongle creates. At this time, you will not have an internet connection and will only be able to connect to the Miracast dongle. The next step is to go to the url containing the ip address that is displayed on your TV or use the app to connect to the device. In the settings, you can choose the wireless network you want to use and enter the password. Once this is completed, the Miracast adapter will disconnect it’s own hotspot, disconnect your phone or tablet from the device, and connect to the wireless network you chose. At this point, you should connect to the same wireless network in order to pair with the device again.
I must share a mistake I had made in hopes of those reading this can learn from it. Do not, under any circumstances, connect to an open wireless network in which you need to visit a web browser to sign in or click and accept button. The Miracast adapter can’t choose to accept a license or enter login information. I did this at the university I work for and found that I could no longer access the dongle for anything relying on wifi, including accessing the settings. I had attempted to disconnect and reconnect, reset, unplug and plug in again the device. As I had already set it to connect to the wifi that requires authentication in a browser, it automatically connected to it every time. I was forced to bring this in a location in which that wireless network was unaccessible so that I could connect directly to the device’s own hotspot and connect it to another network.
Once the wireless connection has been connected to both the PTV dongle and your phone or tablet, you can begin using MirrorOP, DLNA, or AirPlay. Please note that Miracast is connected using different steps which I will discuss later. No wireless connection is needed for Miracast and if this is the sole purpose of using this device, you can ignore the steps above and continue to the section specifically about Miracast. After connecting to wifi, I tested MirrorOP and found that connecting to this worked without issue. The screen mirrored as any other MirrorOP connection does. MirrorOP is an AirPlay-like connection except that it requires a rooted Android device or jailbroken iOS device to connect. It mirrors the screen like AirPlay to a device on the same wireless network. The MirrorOP app needs to be installed on your device to make the connection. Though screen mirroring works, MirrorOP does not support audio mirroring -- the audio will continue to play through your phone or tablet.
Connecting to AirPlay was very disappointing. I attempted to connect to AirPlay both at the university I work at and at home using an iPad on iOS7. In each attempt to connect, the iPad recognized the Miracast dongle as an AirPlay device. When selecting to connect to it, it appeared to work initially. Choosing a photo to display on the AirPlay device, however, proved nothing worked. The photo would not project to the TV. The same applied for video as well, but I have not yet tested audio. When enabling screen mirroring in the AirPlay settings, I was also disappointed by the results. The notification bar turned blue, the device appeared to be trying to connect for mirroring, then the AirPlay settings reset, turning off the connection to the dongle. No matter how many times I tried, it wouldn’t work. It may be my lack of knowledge with iOS and how to properly connect the devices, it could be an incompatibility with iOS7, or it could just be a falsely advertised feature. I don’t know the answer to this. EDITED: If I am correct in that Visiontech makes this device, their website (in a couple of posts below) indicates AirPlay is a feature still in development and will be added in a future update.
EDITED: DLNA works as expected. I did have some buffering/stuttering, but that was likely due to my new ISP which is a reduction in speed. Any DLNA/UPNP app or device will recognize this dongle and send content to it. Since DLNA plays the content locally, I haven't narrowed down which files are supported. I have not had any issue with mp4, which should be expected. In order to use DLNA, this dongle needs to be in AirFun mode, but you don't need to use the AirFun app to use it. This app just gives basic functionality and allows you to setup the dongle.
The most important feature in which I purchased this for is the Miracast functionality. I tested this in two different environments and found two different user experiences. I tested this at the university I work for and at home (which I am still testing more at home and will update this with more information later). Before you can connect to Miracast, you must press the button on the side of the dongle twice to switch to the wireless HDMI mode. At the university, the experience was such that I don’t feel it would be beneficial for the classroom. Connecting took several attempts before it was successful. Upon a successful connection, most of the time my device’s wireless connection was disconnected and reverted to cellular data. The screen mirroring worked as it should, however with a fraction of a second in latency. Audio transmitted to the TV flawlessly as well. At times, especially during heavy activity, the TV would fall further behind than initial connection and the picture would display large groups of poorly rendered blocks. This was further exaggerated when I reconnected to wifi for some reason. It may be due to the large number of wireless devices on a college campus causing interference that caused these issues, but I don’t know enough about networking to make an educated guess to this. I did notice turning the HTC One’s Power Saver mode off improved the experience, but only slightly.
EDITED: At home, I get mixed results. Most of the time, it works flawlessly via Miracast. There are times that the picture lags behind and when it starts to, it can be tens of seconds behind. It eventually catches up, especially if you stop your activity to allow it to catch up. With that said, I streamed a few movies from Plex to my HTC One which was Miracasting to the PTV dongle. I did not see any moments in any attempt in which the mirroring had fallen out of sync with my phone. I did, however, find a few movies that would not play sound over Miracast. I am not sure if this is due to bandwidth, licensing/authentication/DRM, or something else entirely. I need to investigate the files more in depth to determine if it's the stream. I tried to play a game with this, but I honestly found myself looking at my phone more than the TV to see where I was touching on screen. I didn't notice any delay here either, but I wasn't playing a complex game either. I ought to try this using a game controller and see how it performs this way. I also discovered that Google Play Music and Google Play Movies & TV are blocked over Miracast. They will not play, even locally stored music tracks. Play Movies tells me this feature is not supported, while Play Music will either display "Cannot play track" or disconnect the Miracast connection completely. Upon contacting Google with regard to this, they responded indicating that this is normal behavior and suggested I buy a Chromecast. I shouldn't have to buy another product to use Google services that already work on my device.
Being a Sprint customer and experiencing network issues regularly on their cellular data, I have installed an app that floats network download and upload speeds on my screen so that I can determine if anything isn’t working due to my internet connection. I noticed that while connected through Miracast, my upload speeds were incredibly high. This is what I would expect from a Miracast connection considering 1080p video encoded as h.264 mp4 video and up to 5.1 surround sound audio is being sent from my phone to the dongle over wifi direct. For anyone curious about the network activity, my upload speeds floated between 7-9 Mbps while connected to Miracast. Download speeds remained normal for the activity I was performing.
I also wanted to note that the PTV Miracast adapter gets about as hot as the HTC One can during high activity. It can be uncomfortable to touch. The included manual warns about this and promises that it will not affect performance. I am still concerned of the heat, despite the manual’s acknowledgement of this issue. Hopefully the heat doesn’t affect this device’s lifespan. I hope that this in-depth review has been helpful to all those who have read it. I would recommend this product to others, but I would warn others of the shortcomings this dongle has as well. The $50 I paid for this was a fair price considering the average price for Miracast today. Others at the same or higher price don’t offer MirrorOP or AirPlay -- I’m hoping a firmware update down the road fixes the AirPlay problems.
Tested with:
MirrorOP - Nexus 7 (2012) on Android 4.3
AirPlay - iPad 2 (two different iPads) running iOS7
Miracast - HTC One on Android 4.3 Sense 5
Full HD 1080P WiFi Display Dongle HDMI Wireless PTV Support DLNA / Miracast
http://www.amazon.com/gp/product/B00ESUPKE4/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I just received this dongle. Haven't had time to play with it yet, but will very very soon. I did manage to test whether or not the HTC One would connect and on 4.3 Sense 5, it connects and detects it. It's not as intuitive as I would hope, but I'll elaborate later. iPad connectivity via AirPlay will be tested soon too.
gk1984 said:
I just received this dongle. Haven't had time to play with it yet, but will very very soon. I did manage to test whether or not the HTC One would connect and on 4.3 Sense 5, it connects and detects it. It's not as intuitive as I would hope, but I'll elaborate later. iPad connectivity via AirPlay will be tested soon too.
Click to expand...
Click to collapse
please let us know how it works.
thanks
Sent from my HTC One using Tapatalk
Well, I plan on writing an in depth review later and putting I on the Amazon page too. But some initial thoughts:
So far, miracast works great! WiFi turns off while connecting. Not sure if this is normal or not. Performance is also worse with wifi on, in fact it can be very unusable with wifi on. But this was tested at work so far, home wifi might be a different experience.
If you plan to use any of the other features, I don't recommend setting it up on a wifi that needs to be authenticated - as in if you need to open a website, get a splash screen, and either sign in or accept a license agreement. This is not possible to do on this device and it locked me out of the dongle because it was connected to this kind of network and I had no way to change it.
You download the app to control this device directly from the dongle via ip address. You use the app for everything besides miracast - Dlna, configuration, etc.
I'll update op with full, in depth review after I spend some time with it.
Sent from my HTCONE using xda app-developers app
EDIT: testing at home not disconnect of wifi upon connection. iPad on iOS 7 will see the dongle as an airplay device, but can't connect to it for mirroring, not sure what else to do with it. More testing to come.
Another note for everyone before I write my in-depth review... Airplay doesn't work. The iPad will see the dongle as an Airplay device, but won't connect to it. Tried screen mirroring and just picture sharing, neither worked. Could be something to do with iOS 7 or something.
Sent from my HTCONE using xda app-developers app
Updated OP with in-depth review. Need to revisit two sections after I play with it some more. Will update in a few days.
Not having much success at home either. It works for a little bit, then has problems like I experienced at the university. Still planning to update with more info. But I think I found the company that makes this - the vendor has left this information out and the packaging doesn't include this info either. The specs, description, features, and pictures are all identical.
http://www.vissontech.com/products_detail2/&productId=16a67a7b-4b2c-46f6-8a28-c825a361bdd5&comp_stats=comp-FrontProducts_list01-1337323367416.html
In case anyone wants to investigate further.
Wow! this review is very helpful man. thanks for this review. Now I think I want one :cyclops:
gk1984 said:
Not having much success at home either. It works for a little bit, then has problems like I experienced at the university. Still planning to update with more info. But I think I found the company that makes this - the vendor has left this information out and the packaging doesn't include this info either. The specs, description, features, and pictures are all identical.
http://www.vissontech.com/products_...=comp-FrontProducts_list01-1337323367416.html
In case anyone wants to investigate further.
Click to expand...
Click to collapse
No problem. Shop around though, I think if it supported 5ghz wifi like miracast is supposed to, this would have been a better experience. I just recently discovered that.
Sent from my HTCONE using xda app-developers app
HI,
2 weeks ago I got this unit http://www.win-star.com/eshop/goods.php?id=159
I choice it because of the integrated LAN, and simplified functionality (no android, no need to play with air mouse).
It prove to need it own mouse to switch between different modes, as there no any button on unit itself(only hidden reset)
During first star the Unit create own wifi network so I connect to it my samsung galaxy s4 active. However I was unable to test miracast mode not connect.
Then I switch to "bridge to wireless" trying to connect WS-AV601D1 to my existing network but unsuccessfully. I switch back manually to "AP only" mode, however since then I can not see any more networks from the device itself nor to access WIFI settings(its gray/unaccessible). I can not see anymore the open WiFi network that the device should make. I reset it several times to default settings but it going to "Bridge to WiFi" mode instead of "AP only". WiFi light not switching on at all, and wifi module is unaccessible. WiFi module fail about 10 min after first start.
Note that the unit support only WEP encryption, and have no settings for connection to not broadcasted /hidden SSID. So practically I could not connect it WiFi to my existing network even if it works(unless broadcast SSID and change to WEP)!!!
Further I could test only airplay(android airfun appk) from my s4 active and notebook, and screen mirroring from my notebook only(having the device connected to my network via LAN cable). Using the software provided.
Most important for me was the 1080p video played from notebook to TV quality. So the quality was bad, looks like xvid 700MB rip(or more like x264, baseline, ultra fast, 1000bit/s encoding). Dont understand me wrong quality was fair for animation movies of my son, despite of HDMI playback of same video you can not see each hear and dimple of actors face). There was some sound distortion too, however i dint paly with sound settings of the unit. Upload speed during playback was 2-3mbit, while normal speed within my network is 6-7mbit. Note that the Unit is LAN connected to my Asus RT-N66U.
I already send my back to China and waiting for refund.
So I could not test miracast! Does it provide better video quality when mirroring 1080p video What unit you could recommend
I purchased the iview Mira Cast dongle and it pretty much works the same. I did notice a slight lag in playing videos and sometimes it falls behind. The dlna feature works really well but with no remote you have to push everything from the One or browsing your dlna server with another app. I use skifta.
******************************
HTC ONE (Stock so far) Just got 2013-04-21
Samsung Captivate Glide
Installed:
CWMR5x_i927_recovery.tar.md5
ICS 4.0.4 LiteRom 0.9.0
LiteKernel
dudejb said:
I purchased the iview Mira Cast dongle and it pretty much works the same. I did notice a slight lag in playing videos and sometimes it falls behind. The dlna feature works really well but with no remote you have to push everything from the One or browsing your dlna server with another app. I use skifta.
******************************
HTC ONE (Stock so far) Just got 2013-04-21
Samsung Captivate Glide
Installed:
CWMR5x_i927_recovery.tar.md5
ICS 4.0.4 LiteRom 0.9.0
LiteKernel
Click to expand...
Click to collapse
I brought the ezcast and found playback at 1080p theres a lot of delay at times on gaming and streaming on nvidia shield but with the htc one it wasn't to bad
Is the above at all possible? I've searched around for various options for what I'm looking to do and all avenues appear to have either been patched or I may possibly be on the wrong firmware.
Phone is a uk 855
Current FW is 4.4.2
The problem that I'm having is Chromecast while using my phone as a hotspot. I'm allowed to cast various apps, netflix, etc and they all work fine but what I can't do is cast the screen. This is very important to me as I'm trying to create a wireless connection in my car (As other users have done with different models).
On any of the google Nexus phones it's simply a matter of going to Settings>Display>Cast Screen. Is there a way of getting the G3 to do the same? A hack? A workaround? If there is, I can't find it so really need some guidance.
The issue I have is that Miracast disables the hotspot rather than using it and Chromecast just refuses to work without Wifi being on (which again would disable my hotspot). I simply want to connect my phone directly to the chromecast with no outside source of Wifi.
Apologies if I've missed anything important. I wasn't sure what information would be required.
Thanks
Updated to 5.0 and I still don't have the same options as the Nexus & Sony versions. Is there perhaps a custom firmware that I could use?
Sorry but I think no
Surprised to find a "No" with Android, a first for me
I am trying to find a way to cast movies from phone to tv in my camper without using a wifi network. I used to be able to cast from my Note 3 on 4.4 but apparently miracast is broken on 5.0.2? What would work without internet and a wifi network? I read that a Amazon Firestick would work once it's initially set up on a wifi network but haven't been able to verify.
b4u2 said:
I am trying to find a way to cast movies from phone to tv in my camper without using a wifi network. I used to be able to cast from my Note 3 on 4.4 but apparently miracast is broken on 5.0.2? What would work without internet and a wifi network? I read that a Amazon Firestick would work once it's initially set up on a wifi network but haven't been able to verify.
Click to expand...
Click to collapse
I recently moved and had to wait for my ISP to setup internet. It idn't work for me even with a internal network. It needs an outside internet connection for setup to complete. None of my Amazon devices or Chromecast worked and only one of my Plex clients worked because it was previously configured for automatic sign in.
b4u2 said:
I am trying to find a way to cast movies from phone to tv in my camper without using a wifi network. I used to be able to cast from my Note 3 on 4.4 but apparently miracast is broken on 5.0.2? What would work without internet and a wifi network? I read that a Amazon Firestick would work once it's initially set up on a wifi network but haven't been able to verify.
Click to expand...
Click to collapse
Here is how I do it when I travel but you may need a intermediate device. I would download movies onto my phone, start up my hotspot, use another device to setup the chromecast and then use an app like Local Cast to cast the movies from my phone to the chromecast. Recently I tried it and Local Cast wouldnt see the chromecast from my phone. So I moved the movies to my tablet and my tablet over the hotspot could see the chromecast and then I would stream them that way.
Because you arent actually pulling data for the movies (other than whatever background processes are running on the tablet) it doesnt sap away at your hotspot data.
I downlaod my movies to my Note 3 which is currently a wifi only device. I then set up a hot spot on my pixel xl and set up the chromecast. Then using allcast I was able to connect and cast to the chromecast. I swear this was much easier when miracast worked. I haven't tried the Firestick yet to see what happens.
I tested a few things to see what would work with the chromecast. Hotspot had to be on and left on. I could never get "guest" mode to work but the info says it should work so a guest can cast without being on your wifi network. No clue how to make that work yet.
I'll try and test firestick tonight. I also have a spare wifi router that I might take and see what I can do with it.
The firestick did not work.
This is so annoying since it worked on Android 4.4 and now on 5.0.2 it doesn't. I just want to simply cast my phone to my tv in a camper without a wifi network. I suppsoe I can eventually buy a wifi router but I really shouldn't have to. I wonder if the Note 8 will have Miracast or not?
Miracast works with crDroid ROM
b4u2 said:
The firestick did not work.
This is so annoying since it worked on Android 4.4 and now on 5.0.2 it doesn't. I just want to simply cast my phone to my tv in a camper without a wifi network. I suppsoe I can eventually buy a wifi router but I really shouldn't have to. I wonder if the Note 8 will have Miracast or not?
Click to expand...
Click to collapse
I just got Miracast working with "crDroidAndroid-8.1-20180405-marlin-v4.1" for the Pixel XL. I just went into settings - connected devices - cast - then hit the three dots in the upper right hand corner to 'enable cast'. On my Fire Stick I started device mirroring. Bingo! Fire Stick shows up as connected. Works with VLC and Youtube testing so far. Sound and video work. Rotation of phone to horizontal creates full screen (55" TV) mode. I have magisk 16* installed but there are no settings I used in that app for this to work, just wanted it noted as it is the only non-stock app installed so far.
Linuxmon
I posted this in the Pixel thread as well, forgot which forum I was on....
Linuxmon said:
I just got Miracast working with "crDroidAndroid-8.1-20180405-marlin-v4.1" for the Pixel XL. I just went into settings - connected devices - cast - then hit the three dots in the upper right hand corner to 'enable cast'. On my Fire Stick I started device mirroring. Bingo! Fire Stick shows up as connected. Works with VLC and Youtube testing so far. Sound and video work. Rotation of phone to horizontal creates full screen (55" TV) mode. I have magisk 16* installed but there are no settings I used in that app for this to work, just wanted it noted as it is the only non-stock app installed so far.
Linuxmon
I posted this in the Pixel thread as well, forgot which forum I was on....
Click to expand...
Click to collapse
Interesting. I am on 8.1 stock, rooted, and custom kernel. I will have to test again when camping season kicks in here soon. I did pick up a Galaxy s7 Edge that will hopefully cast with Miracast. The Note 3 I was trying to use is retired now.
Once I enabled tethering on mine I was able to cast to my Chromecast with the in app cast button. I either had data disabled (the x over the cellular signal) or I turned on airplane mode then the tethering. This allowed it to work for some reason that I cannot explain in much detail. Basically one of those two things maybe both can't remember causes the traffic to be properly routed locally instead of over the net like before. I accomplished this on stock Android using localcast,YouTube, and Netflix less than a month ago.
Hello everyone!
I'm trying to screen-mirror my A2 Lite to a Smart TV Sony Bravia KDL40W605B, but for the moment I cannot do it.
Both the devices are connected to the same wireless network, they browse happily without any problem and have the latest software updates installed.
If I choose "Cast" from the notification bar and choose the Sony Bravia TV from the device list, nothing happens.
What am I doing wrong? Is there any way to solve this issue?
Thanks to whomever will answer me.
P.S. Just for saying, my old Samsung A3 (2015) and my old Huawei P8Lite (2016) did screen mirroring with that Sony TV without any problem.
alessandroarzilli said:
Hello everyone!
I'm trying to screen-mirror my A2 Lite to a Smart TV Sony Bravia KDL40W605B, but for the moment I cannot do it.
Both the devices are connected to the same wireless network, they browse happily without any problem and have the latest software updates installed.
If I choose "Cast" from the notification bar and choose the Sony Bravia TV from the device list, nothing happens.
What am I doing wrong? Is there any way to solve this issue?
Thanks to whomever will answer me.
P.S. Just for saying, my old Samsung A3 (2015) and my old Huawei P8Lite (2016) did screen mirroring with that Sony TV without any problem.
Click to expand...
Click to collapse
I don't think there is a solution yet, except trying some 3rd party apps. I also tried to use this phone with screen mirroring or whatever Samsung TV's function is called, and it briefly worked, the image freezed on the tv, followed by the phone failure to connect to that device again until unplugged and plugged in again, followed by the same error. Sometimes it would work for hours, sometimes not at all.
On my friends Samsung (A5 or something like that) connecting to that TV works just like charm.
TheoXSD said:
I don't think there is a solution yet, except trying some 3rd party apps.
[...]
On my friends Samsung (A5 or something like that) connecting to that TV works just like charm.
Click to expand...
Click to collapse
Hello TheoXSD, thanks for answerring me.
If the built-in "Cast" software doesn't work, then I'll use third party apps, there's no problem for me. The question is: which app should I use? I searched a bit on google play store and found tons of applications regarding this topic, but the majority looked quite obsure and strange to me...
My goal is to just duplicate my smartphone screen into my Bravia TV, nothing more.
Can't really understand why Samsung decives work so well when casting the screen...
alessandroarzilli said:
Hello TheoXSD, thanks for answerring me.
If the built-in "Cast" software doesn't work, then I'll use third party apps, there's no problem for me. The question is: which app should I use? I searched a bit on google play store and found tons of applications regarding this topic, but the majority looked quite obsure and strange to me...
My goal is to just duplicate my smartphone screen into my Bravia TV, nothing more.
Can't really understand why Samsung decives work so well when casting the screen...
Click to expand...
Click to collapse
I really have no idea. Better software support and licensing I presume.
As for which app to use, I have no idea, check them one by one, which fits you best. I gave up on screen mirroring since that day.
TheoXSD said:
I really have no idea. Better software support and licensing I presume.
As for which app to use, I have no idea, check them one by one, which fits you best. I gave up on screen mirroring since that day.
Click to expand...
Click to collapse
I understand. May I ask once again if anybody has any solution to this problem?
Because maybe I am doing something wrong, without knowing it.
That's just it, I choose "Cast" from the status bar, it recognises the Bravia TV and then...nothing happens and it loads forever.
Please somebody help
Look for scrcpy (PC software), it connects via usb. On linux it works fine.
celrau said:
Look for scrcpy (PC software), it connects via usb. On linux it works fine.
Click to expand...
Click to collapse
I guess the only problem would be that I need to screen cast my smartphone's screen through wireless and not through cable. Thanks anyway.
However, yesterday something happened, both positively and negatively and I managed to cast my Mi Xiaomi Mi A2 Lite to my Sony Bravia KDL40W605B.
I followed a tutorial on YouTube by Geeki Review and it worked once, just once, perfectly, and then it stopped and I couldn't manage to make it work again ever more, even though I replicated the same exact steps.
The tutorial was like this:
1) Go to TV -> System Settings -> Setup -> WiFi Setup (Or simply go to SEN, Settings, Network).
2) Activate WiFi and WiFi Direct and then go to WiFi Settings
3) Press Options on the remote and choose Manual, Other method, No WPS
4) Now the TV offers you a WPA Key, take a picture of it or write it somewhere!
5) On your smartphone go to Settings, turn of the WiFi, find the Bravia Wifi network and connect it using the WPA Key
6) Wait untile the registration process completes and the choose to forget that WiFi Network
7) Now on the TV remote go to Soucres and choose Screen mirroring
8) On your smartphone choose Cast from the notification bar, choose Bravia TV, choose Accept on the TV and then wait, it may take some minutes.
It worked perfectly only ONCE.
Greetings,
I'm trying to mirror the screen of my Samsung Galaxy A3 Smartphone (using the pre-installed "Smart View" app) on a Sony KD-49XD8005 TV (using the pre-installed "Screen Mirroring" app) and it just isn't working. More precisely it isn't working anymore, because some time ago it did work. I can't provide many details, sadly, because it was the TV of my sister back then. I got it from her only a few days ago. Just one thing: it was definitely an older Android TV version back then.
I see the TV on my smartphone, but the connection attempt fails after 1-2 minutes. I see that a WiFi-direct connection gets stablished inbetween, then everything disappears.
I've searched on the internet in the hope to find a solution, but it didn't really work out. Most "guides" are rather useless like "restart everything, install the newest updates on everything" and so on. Some articles advice to turn off the bluetooth connection, which I did.
Some articles suggest to use Google Chromecast via the Google Home app, but that's a bit too much for what I wanted to achieve. All the privileges the app wants, all the stuff about adding "rooms" and what not... Casting via the Google Chrome browser was mentioned a few times as well, but I don't see anything related to this on my smartphone.
So from my understanding there are 3 options:
- getting the current setup to work somehow (not very likely, probably)
- replacing the current "Screen mirroring" app on the TV with the appropriate app from one of the current Sony TVs (would be my preferred solution, I think, but not sure if that works)
- installing some third party Miracast screen mirroring app from the play store (any advices?)
Would be great, if you guys could point me into the right direction here... If there is another option, please let me know. Was looking for a complete AndroidTV ROM as alternative first, but there seems not to be one as far as I saw.
Some details:
After the latest update Android TV 9 is installed on the TV. The version of the pre-installed Screen Mirroring app is 4.1.A.0.8 and it apparently originates from screnmirroring.com
Not sure if the missing "e" is a typo or if there was such a domain at some point. Currently I only can reach screenmirroring.com (with double "e") and this website is about an app called "Castto" from SoomApps, so it's something different, apparently.
Before this TV I had a very old one (not even a smart TV) and was using an Amazon FireTV stick 4k on it. Screen mirroring with the stick was working just fine. Also mirroring the screen of a tablet is working fine with the FireTV stick, so it's the TV, that is causing trouble, not the other devices.
Have you tried Chromecasting to the TV? I Chromecast to my 900e from various devices, including a Samsung tablet.