I appreciate the fact that many will think this thread is a complete waste of time, but i'm struggling to find out how to actually do this with the G4. I have an unlocked bootloader and TWRP 2.8.7.0 installed, but from what i've read the latest Xposed Framework installer (v79) is still causing bootloops on this phone. Are there any safe methods to install Xposed without using the drawn out solution posted here?
P650SE said:
but from what i've read the latest Xposed Framework installer (v79) is still causing bootloops on this phone. Are there any safe methods to install Xposed without using the drawn out solution posted here?
Click to expand...
Click to collapse
from what you read?! what about trying yourself?
tons of people here have the latest xposed working just fine.... too busy ****ting your pants for a bootloop (that with twrp on you can solve in 2mins)???
Sent from my LG-H815 using Tapatalk
Just make sure you have the uninstaller to hand if you need it and also take a back up. I have used xposed on stock 5.1 and stock 6 also cm12.1 and cm13 so there shouldn't be any issues here
kaiowas82 said:
from what you read?! what about trying yourself?
tons of people here have the latest xposed working just fine.... too busy ****ting your pants for a bootloop (that with twrp on you can solve in 2mins)???
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
rav101 said:
Just make sure you have the uninstaller to hand if you need it and also take a back up. I have used xposed on stock 5.1 and stock 6 also cm12.1 and cm13 so there shouldn't be any issues here
Click to expand...
Click to collapse
Sorry, i'm an idiot. I'll see whether it works, but there's plenty of people in rovo89's Xposed thread that have experienced bootloops with the G4 and this latest version.
P650SE said:
Sorry, i'm an idiot. I'll see whether it works, but there's plenty of people in rovo89's Xposed thread that have experienced bootloops with the G4 and this latest version.
Click to expand...
Click to collapse
I don't think you are an idiot... You have actually taken the time to read the thread and check compatibility which is very smart.
I know v79 skd23 works on cm13 and genesis v3.5 so any marshmallow based roms should be fine. If you have issues then use the uninstaller and if that fails then restore the backup you have taken. No harm done. If you do have issues I'm sure a fresh install of your rom of choice and then install xposed (and nothing else at the same time, plus wipe dalvik and cache) should sort you out.
rav101 said:
I don't think you are an idiot... You have actually taken the time to read the thread and check compatibility which is very smart.
I know v79 skd23 works on cm13 and genesis v3.5 so any marshmallow based roms should be fine. If you have issues then use the uninstaller and if that fails then restore the backup you have taken. No harm done. If you do have issues I'm sure a fresh install of your rom of choice and then install xposed (and nothing else at the same time, plus wipe dalvik and cache) should sort you out.
Click to expand...
Click to collapse
Thank you for being so kind. I went into TWRP and flashed the file, but unfortunately i ended up with the bootloop. So then i went to boot into recovery by holding the power buttons, but all it gives me is the LG recovery and not TWRP. So now my phone is essentially bricked and i've only had it a week.
rav101 said:
I don't think you are an idiot... You have actually taken the time to read the thread and check compatibility which is very smart.
I know v79 skd23 works on cm13 and genesis v3.5 so any marshmallow based roms should be fine. If you have issues then use the uninstaller and if that fails then restore the backup you have taken. No harm done. If you do have issues I'm sure a fresh install of your rom of choice and then install xposed (and nothing else at the same time, plus wipe dalvik and cache) should sort you out.
Click to expand...
Click to collapse
P650SE said:
Thank you for being so kind. I went into TWRP and flashed the file, but unfortunately i ended up with the bootloop. So then i went to boot into recovery by holding the power buttons, but all it gives me is the LG recovery and not TWRP. So now my phone is essentially bricked and i've only had it a week.
Click to expand...
Click to collapse
We're okay, i sorted it. Never been so scared in my life, thought the phone was done for because i had no ADB or Fastboot to save me. It turns out that by choosing the factory reset option in the LG recovery, it simply boots straight to TWRP because the default recovery is missing. Then i was able to flash the Xposed uninstaller and it booted fine afterwards.
P650SE said:
I appreciate the fact that many will think this thread is a complete waste of time, but i'm struggling to find out how to actually do this with the G4. I have an unlocked bootloader and TWRP 2.8.7.0 installed, but from what i've read the latest Xposed Framework installer (v79) is still causing bootloops on this phone. Are there any safe methods to install Xposed without using the drawn out solution posted here?
Click to expand...
Click to collapse
I have just installed it through twrp with no bootloops
Sent from my LG-H815 using XDA Free mobile app
stevoswifty said:
I have just installed it through twrp with no bootloops
Sent from my LG-H815 using XDA Free mobile app
Click to expand...
Click to collapse
What ROM are you using right now?
Aicp 11.0
Sent from my LG-H815 using XDA Free mobile app
I'm using the stock Marshmallow ROM. From what i understand it's only working for those with custom ROM's.
P650SE said:
I'm using the stock Marshmallow ROM. From what i understand it's only working for those with custom ROM's.
Click to expand...
Click to collapse
Sorry..... That's your issue. I actually told you wrong yesterday. I meant to say stock based marshmallow rather than stock. It will work with genesis v3.5 which is stock based and an easy flash of you are already on marshmallow. It's due to xposed needing the system to be deodexed.
Regards,
Ravi
If you are on stock MM make sure to install deodex apps which you can find on xda.
Sent from my LG-H815 using Tapatalk
imarcel99 said:
If you are on stock MM make sure to install deodex apps which you can find on xda.
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
Sounds hopeful, i'll have a go and see whether it works for me!
imarcel99 said:
If you are on stock MM make sure to install deodex apps which you can find on xda.
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
P650SE said:
Sounds hopeful, i'll have a go and see whether it works for me!
Click to expand...
Click to collapse
Meh, well it booted alright but i ended up with 'SystemUI has stopped working' against a black screen. Dammit.
Related
Hey all,
Just got my Gpad 8.3 v50020d kitkat 4.4.2 yesterday. Trying to flash a CM ROM preferably, but having nothing but issues.
I was able to get TWRP 2.8 installed, and make a backup of stock. Have been able to wipe and restore no problems. But everytime I try to flash cm-11-20140910-INFECTED-v500 I get a failed error. Also, can't flash the KitKat gapps-kk-20140606.
Never had problems flashing custom ROMs on my ASUS tablet, galaxy S4, Hisense tablets, so a little guidance would be MUCH appreciated.
I must be overlooking something...please help all.
Thanks so much.
jt
V500 is very tricky tablet, i had issues too, but after few tries i was able to install slimrom, latest weekly build. The newest TWRP is a must, you can't install any ROM without it, so there is probably your problem. If not, try to wipe. First factory reset and then advanced wipe and check first 4 options I think. Flash ROM and it should work.
But I want to ask you - don't you have unmount SD issue? If not, try to monitor it after flashing ROM, it can appear and it's pain in the ass
Well I do know if you take the 4.4.2 OTA after purchase or you buy with 4.4.2 installed,
Its 10 times more of a pain to root/recovery/rom on 4.4.x base, it's a lot easier on 4.2.2 base.
As for TWRP I'm on 2.6.3.2 and never had any problems.
Sent From V500
Using XDA App
Appreciate the replies all.
After wiping again, I tried flashing CM 11.0 Nightlies and it worked without a hitch. Also flashed the same gapps zip but this time it worked. I don't know whats up, I was having external SD issues so I put the ROMs on internal storage as well.
Now that its all up and running, I have root,and no problems accessing external SD card. Also, knock on works as does my smart cover. Couldn't be happier. Incredible battery life and amazing speed.
:good:
jt1998 said:
Appreciate the replies all.
After wiping again, I tried flashing CM 11.0 Nightlies and it worked without a hitch. Also flashed the same gapps zip but this time it worked. I don't know whats up, I was having external SD issues so I put the ROMs on internal storage as well.
Now that its all up and running, I have root,and no problems accessing external SD card. Also, knock on works as does my smart cover. Couldn't be happier. Incredible battery life and amazing speed.
:good:
Click to expand...
Click to collapse
Can you help me how to install TWRP? I tried many ways but it does not work out. I am using laster firmware 4.4.2 and it was rooted. Thank you so much for your help.:good:
wynstonle said:
Can you help me how to install TWRP? I tried many ways but it does not work out. I am using laster firmware 4.4.2 and it was rooted. Thank you so much for your help.:good:
Click to expand...
Click to collapse
probably the easiest way is using this TWRP Manager (ROOT) app from the Play store. It will allow you to install TWRP onto your rooted, unlocked bootloader device.
I did it a harder/longer way without the above app so try the TWRP Manager app first.
Good luck!
jt1998 said:
probably the easiest way is using this TWRP Manager (ROOT) app from the Play store. It will allow you to install TWRP onto your rooted, unlocked bootloader device.
I did it a harder/longer way without the above app so try the TWRP Manager app first.
Good luck!
Click to expand...
Click to collapse
Just curious, has anybody confirmed that the TWRP manager app is compatible with the V500? Does it deal with the Loki exploit required for our tablet?
woody1 said:
Just curious, has anybody confirmed that the TWRP manager app is compatible with the V500? Does it deal with the Loki exploit required for our tablet?
Click to expand...
Click to collapse
I would download the TWRP (for our device) of the xda thread to be honest,
And flash manually through a flashing app off Google Play (I use Flashify, but there a few on there)
In theory if it grabs the TWRP file for the V500 it would have the Loki patch in the recovery file, but I wouldn't take the chance just in case it grabs any random file lol
Manual is the best on the tablet itself, or do it through a PC and push the TWRP file through ADB to the recovery partition.
But now-a-days you just run the .bat files and it does all the mumbo jumbo for you and reboots straight to the recovery.
Hope all goes well!
Sent From V500
Using XDA App
LiamAtkins90 said:
I would download the TWRP (for our device) of the xda thread to be honest,
And flash manually through a flashing app off Google Play (I use Flashify, but there a few on there)
In theory if it grabs the TWRP file for the V500 it would have the Loki patch in the recovery file, but I wouldn't take the chance just in case it grabs any random file lol
Manual is the best on the tablet itself, or do it through a PC and push the TWRP file through ADB to the recovery partition.
But now-a-days you just run the .bat files and it does all the mumbo jumbo for you and reboots straight to the recovery.
Hope all goes well!
Sent From V500
Using XDA App
Click to expand...
Click to collapse
I did it the way you listed since i didn't know about TWRP Manager until after the fact. DOH!
jt1998 said:
I did it the way you listed since i didn't know about TWRP Manager until after the fact. DOH!
Click to expand...
Click to collapse
How did it go?
Did you managed to get it on the device?
Sent From V500
Using XDA App
LiamAtkins90 said:
I would download the TWRP (for our device) of the xda thread to be honest,
And flash manually through a flashing app off Google Play (I use Flashify, but there a few on there)
In theory if it grabs the TWRP file for the V500 it would have the Loki patch in the recovery file, but I wouldn't take the chance just in case it grabs any random file lol
Manual is the best on the tablet itself, or do it through a PC and push the TWRP file through ADB to the recovery partition.
But now-a-days you just run the .bat files and it does all the mumbo jumbo for you and reboots straight to the recovery.
Hope all goes well!
Click to expand...
Click to collapse
I agree. Until somebody can confirm that this app works reliably with our tablet, I would go with the manual approach.
LiamAtkins90 said:
How did it go?
Did you managed to get it on the device?
Sent From V500
Using XDA App
Click to expand...
Click to collapse
I can't remember all the details. But I'm pretty sure I put the 2.6 version of TWRP onto my internal storage, downloads folder, I think (I did have an external SD card installed too, but I can't remember where I put TWRP initially). Then installed it using the stock recovery...Once TWRP 2.6 was on there, I upgraded to 2.8. Then, made my stock backup and then flashed CM 11.
jt1998 said:
I can't remember all the details. But I'm pretty sure I put the 2.6 version of TWRP onto my internal storage, downloads folder, I think (I did have an external SD card installed too, but I can't remember where I put TWRP initially). Then installed it using the stock recovery...Once TWRP 2.6 was on there, I upgraded to 2.8. Then, made my stock backup and then flashed CM 11.
Click to expand...
Click to collapse
Awesome man, glad to know it all went smooth
Sent From V500
Using XDA App
Afternoon guys,
No matter what I do I can not get TWRP installed on my tablet. I've tried Flashify. Using 1 Click TWRP Install and other methods through a PC.
Can someone please help me?
Sent from my LG-D802 using XDA Free mobile app
ChrisHoppyBot said:
Afternoon guys,
No matter what I do I can not get TWRP installed on my tablet. I've tried Flashify. Using 1 Click TWRP Install and other methods through a PC.
Can someone please help me?
Sent from my LG-D802 using XDA Free mobile app
Click to expand...
Click to collapse
You're rooted right?
My device has an unlocked bootloader. Does yours say the same?
Which version of twrp are you trying to install?
Once above is done try using twrp manager in the play store.
Let me know how it goes.
How do I unlock the freaking bootloader? I have root and twrp but cant boot into it because of the locked bootloader
I am in the same boat. I have rooted my device and I can't get any further.
Sent from my LG-D802 using XDA Free mobile app
I would like to know about installing xposed With recovery. I've rooted and unlocked my H815 with Twrp, if i flash xposed will it have the same outcome of the phone being blacked out for 30 mins or so?
anyone tried?
I have used TWRP to install xposed. the process was very fast and smooth.
No need for FF at all
jafferkhan said:
will it have the same outcome of the phone being blacked out for 30 mins or so?
anyone tried?
Click to expand...
Click to collapse
Huh? Where did you get this info?
Installing the correct xposed pacakge does not have any back-draws.
Thanks guys... All done here
Sent from my LG-H815 using XDA Free mobile app
davebugyi said:
Huh? Where did you get this info?
Installing the correct xposed pacakge does not have any back-draws.
Click to expand...
Click to collapse
It's possible to flash Xposed on a locked bootloader, using flashfire and the process takes half an hour.
android404 said:
It's possible to flash Xposed on a locked bootloader, using flashfire and the process takes half an hour.
Click to expand...
Click to collapse
Okay. OP asked about TWRP tough, not flashfire.
davebugyi said:
Okay. OP asked about TWRP tough, not flashfire.
Click to expand...
Click to collapse
I know that. He didn't know if the same applies for twrp and I thought you would like to get an answer to your question.
Just flashed the zip file through TWRP and it left me in a bootloop!
You need the deodexed system apps to get it to start. If you don't want to mess around, just get Genesys ROM and all is fine. Otherwise search for the deodexed system apps.
Is there an xposed runtime .zip or whatever for the marshmallow update to Sprint s6 to be able to use xposed modules?
I still have:
xposed-v80.0-sdk22-arm64-custom-build-by-wanam-20160211.zip
Which worked on LP, but I don't want to flash it and mess up the phone if it's not supposed to be for this version.
H0wdy said:
Is there an xposed runtime .zip or whatever for the marshmallow update to Sprint s6 to be able to use xposed modules?
I still have:
xposed-v80.0-sdk22-arm64-custom-build-by-wanam-20160211.zip
Which worked on LP, but I don't want to flash it and mess up the phone if it's not supposed to be for this version.
Click to expand...
Click to collapse
There's a marshmallow version of xposed in the original thread, however, we don't have twrp yet. There's no way to flash a zip without that, at least that I know of. I'm sure we won't be waiting too long for twrp though.
Should same mm version work?
H0wdy said:
Should same mm version work?
Click to expand...
Click to collapse
same version of what? TWRP won't work from my understanding. There is a version of xposed for MM though
Flashfire works to flash xposed with. You will want the sdk23 version that is made for MM though.
carrsteven said:
Flashfire works to flash xposed with. You will want the sdk23 version that is made for MM though.
Click to expand...
Click to collapse
Thats good stuff. I read on the xposed forums that it will not work on samdung stock rom. Can you confirm what package you got to work with this device? Is this the package that you flashed?
http://forum.xda-developers.com/attachment.php?attachmentid=3631566&d=1454436795
Sent from my SM-G920P using Tapatalk
asafegous said:
Thats good stuff. I read on the xposed forums that it will not work on samdung stock rom. Can you confirm what package you got to work with this device? Is this the package that you flashed?
http://forum.xda-developers.com/attachment.php?attachmentid=3631566&d=1454436795
Sent from my SM-G920P using Tapatalk
Click to expand...
Click to collapse
No, that is from the official xposed thread, not the one for Samsung phones. This thread here: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
xposed-v80.0-sdk23-arm64-custom-build-by-wanam-20160211.zip is the file you want to download.
southernstyle said:
There's a marshmallow version of xposed in the original thread, however, we don't have twrp yet. There's no way to flash a zip without that, at least that I know of. I'm sure we won't be waiting too long for twrp though.
Click to expand...
Click to collapse
Actually we do... We just got it working and are planning to share it later
1619415 said:
Actually we do... We just got it working and are planning to share it later
Click to expand...
Click to collapse
Thats awesome.
1619415 said:
Actually we do... We just got it working and are planning to share it later
Click to expand...
Click to collapse
Awesome can't wait. Battery life has been terrible lol. Thanks for the update
southernstyle said:
Awesome can't wait. Battery life has been terrible lol. Thanks for the update
Click to expand...
Click to collapse
Battery has been terrible on MM? Ughh my S7 upgrade can't come soon enough -_-
So i got boot ani to quit reminding me how big sprints......spectrum is. Any way to change carrier label?
Sent from my SM-G920P using Tapatalk
JoeFCaputo113 said:
Battery has been terrible on MM? Ughh my S7 upgrade can't come soon enough -_-
Click to expand...
Click to collapse
I've gotten a full day of heavy use with a custom ROM, I didn't make it to 5pm today. I had greenify and amplify working on the custom rom though, so hopefully now that we have recovery, I can test out xposed and get some of those things back. This was my first Samsung phone, I'm not sure I'd go to the S7 after this experience. I came from a phone that easily got 1.5 days on a charge.
carrsteven said:
Flashfire works to flash xposed with. You will want the sdk23 version that is made for MM though.
Click to expand...
Click to collapse
I can't get this working correctly.
I installed flashfire and flash the zip and let it keep the option to mount system read/write, and i see it unpacking files, and then the screen goes blank and eventually i have to force it to reboot.
After reboot, xposed apk says it's not installed.
Is there some other way to flash the zip?
1619415 said:
Actually we do... We just got it working and are planning to share it later
Click to expand...
Click to collapse
You used flashfire? That won't do it for me. After extracting, goes to a black screen and I have to force a reboot, then xposed afterwards says it's not installed.
Worked just fine for me. For multiple different files. V4a, xposed, and a couple other things.
Screenshots added for exact settings I used.
Flashfire takes a few minutes to load once it does all that unpacking. My suggestion would be to be patient before forcing a reboot.
Sent from my SM-G925P
More screens.
carrsteven said:
Worked just fine for me. For multiple different files. V4a, xposed, and a couple other things.
Screenshots added for exact settings I used.
Flashfire takes a few minutes to load once it does all that unpacking. My suggestion would be to be patient before forcing a reboot.
Sent from my SM-G925P
Click to expand...
Click to collapse
Thanks. I notice you have SM-G925P?
Does it matter that I have G-920P?
After it does the "loading..." showing the unloading and all the files extracting, the screen goes black, and it's unresponsive. Even after 10 minutes.
I used all your settings... same thing.
H0wdy said:
Thanks. I notice you have SM-G925P?
Does it matter that I have G-920P?
After it does the "loading..." showing the unloading and all the files extracting, the screen goes black, and it's unresponsive. Even after 10 minutes.
I used all your settings... same thing.
Click to expand...
Click to collapse
That's odd, I wouldn't figure there'd be that much of a difference between the flat and edge model that flashfire would work for me and not for you.
carrsteven said:
That's odd, I wouldn't figure there'd be that much of a difference between the flat and edge model that flashfire would work for me and not for you.
Click to expand...
Click to collapse
Well, it's been 15 minutes now. Still black screen. I'm going to have to reboot it.
Is there some other way to install the .zip?
I just rooted my HTC 10 and installed Xposed and got the Youtube Adaway Module. My previous phone was a Z3 where I had used GravityBox which ran fine. Since this is my first HTC device will the GravityBox MM work for this device or is there an alternative besides GravityBox.
Thanks Again.
As I remember GravityBox is programmed to run on and with AOSP based ROMs. Now when it comes to HTC, stock ROMs aren't AOSP based. I never used it myself though and I'm a long time HTC user. If you want you can try it if course, but should perform a backup prior to doing so.
Sent from my HTC 10 using XDA Labs
HTCNerdYoda said:
As I remember GravityBox is programmed to run on and with AOSP based ROMs. Now when it comes to HTC, stock ROMs aren't AOSP based. I never used it myself though and I'm a long time HTC user. If you want you can try it if course, but should perform a backup prior to doing so.
Sent from my HTC 10 using XDA Labs
Click to expand...
Click to collapse
Just tried and it works, only needed GravityBox to show the AM/PM and change the battery icons. Can't say about the other features on it as I only needed these two functions. Also got Xposed working with greenify, and Youtube Adblock. Looks like I am good to go for a while!
Sounds as if. Have fun with your new 10!
Sent from my HTC 10 using XDA Labs
Most GB features work. Lock screen features don't due to a non AOSP lock screen.
Adaway works.
Wish we'd get Sense Toolbox. Missing my secure lock screen.
Sent from my HTC 10 using Tapatalk
serophia said:
I just rooted my HTC 10 and installed Xposed and got the Youtube Adaway Module. My previous phone was a Z3 where I had used GravityBox which ran fine. Since this is my first HTC device will the GravityBox MM work for this device or is there an alternative besides GravityBox.
Thanks Again.
Click to expand...
Click to collapse
Which exact framework did you use? Thanks
Swarai said:
Which exact framework did you use? Thanks
Click to expand...
Click to collapse
Use the most recent version 84, sdk23 for arm64
Sent from my HTC 10 using Tapatalk
datafoo said:
Use the most recent version 84, sdk23 for arm64
Sent from my HTC 10 using Tapatalk
Click to expand...
Click to collapse
S-off?
Swarai said:
S-off?
Click to expand...
Click to collapse
We're talking about xposed and not s-off.
They're not related.
datafoo said:
We're talking about xposed and not s-off.
They're not related.
Click to expand...
Click to collapse
Okay thanks... I just flashed v84 sdk23 arm64 and it gave me "Updater process ended with ERROR: 1 what did you do to get your xposed working? thank you
first off, I mean this the best way possible. You need to be both more clear and more complete in your posts and questions. I could (and many would) very much give you a hard time but will try to help you.
1. If I'm not mistaken, that is a TWRP error. You can do a forum or google search and you'll find many threads about it with options.
2. Post the TWRP log so we can see what happend, or take a screenshot so we can see exactly what the output text on the screen was before the error.
3. Are you using TWRP? I assume so if you're on an HTC 10.
4. I simply flashed the proper exposed module in TWRP.
Long story short way too many variables to simply answer your question. You could wipe the cache and reboot into recovery, re copy the .zip to your SD or adb push it over. and reflash
datafoo said:
first off, I mean this the best way possible. You need to be both more clear and more complete in your posts and questions. I could (and many would) very much give you a hard time but will try to help you.
1. If I'm not mistaken, that is a TWRP error. You can do a forum or google search and you'll find many threads about it with options.
2. Post the TWRP log so we can see what happend, or take a screenshot so we can see exactly what the output text on the screen was before the error.
3. Are you using TWRP? I assume so if you're on an HTC 10.
4. I simply flashed the proper exposed module in TWRP.
Long story short way too many variables to simply answer your question. You could wipe the cache and reboot into recovery, re copy the .zip to your SD or adb push it over. and reflash
Click to expand...
Click to collapse
Yes, I am using TWRP3.0.2.2. When I flash xposed v84 sdk23 arm64 I get what you seen in the photo. When I open xposed installer (V 3.0 alpha4) I get "The latest version of xposed is currently not active". Though I'm still searching I still cannot find what my particular problem is. I hope these attachemnts can help. Thank you
Swarai said:
Yes, I am using TWRP3.0.2.2. When I flash xposed v84 sdk23 arm64 I get what you seen in the photo. When I open xposed installer (V 3.0 alpha4) I get "The latest version of xposed is currently not active". Though I'm still searching I still cannot find what my particular problem is. I hope these attachemnts can help. Thank you
Click to expand...
Click to collapse
If you look at the screenshot it tells you exactly what the problem is. Did you even read it?
Tell us what it says directly before the error?
"system mounted as read only file system" - you didn't mount as read/write. You have to mount R/W for SU and anything like this you're going to flash.
Try again, this time set the system to mount as R/W and be sure to read and watch what you're doing.
People are here to help but the trade-off is you must make efforts and not solely rely on others to solve your problems.
Sent from my HTC 10 using Tapatalk
datafoo said:
Most GB features work.
Click to expand...
Click to collapse
@datafoo Do you happen to know if the long press volume buttons to change tracks mod works from GB on the stock rom? TIA!
Sent from my HTC 10 using XDA-Developers mobile app
VolcanicSkunk said:
@datafoo Do you happen to know if the long press volume buttons to change tracks mod works from GB on the stock rom? TIA!
Sent from my HTC 10 using XDA-Developers mobile app
Click to expand...
Click to collapse
Just tested and it did not work for me.
datafoo said:
Just tested and it did not work for me.
Click to expand...
Click to collapse
Thanks so much!
Sent from my HTC 10 using XDA-Developers mobile app
im trying to get my Xxposed installed as well, and when trying to flash the v84 sdk23 arm64, It throws no errors, and immediately reboots TWRP? Any tips or anyone else seen the same? Thanks
datafoo said:
Just tested and it did not work for me.
Click to expand...
Click to collapse
VolcanicSkunk said:
Thanks so much!
Click to expand...
Click to collapse
Xposed additions worked though! It's a great module
Hello, Is anyone doing anything special to get Xposed to work? It says it's installed and active but no modules work.. Im stock rooted if that helps
Sent from my 2PS64 using XDA-Developers mobile app
l1ttl3z said:
Hello, Is anyone doing anything special to get Xposed to work? It says it's installed and active but no modules work.. Im stock rooted if that helps
Sent from my 2PS64 using XDA-Developers mobile app
Click to expand...
Click to collapse
Did you mount system in TWRP before flashing the SDK? That's what I didnt do, then after I did, all was well
Sent from my HTC6545LVW using Tapatalk
Do I download update Ota then install on rooted rom, or flash Back to stock and update
pdolo5784 said:
Do I download update Ota then install on rooted rom, or flash Back to stock and update
Click to expand...
Click to collapse
You should flash back to stock and update. Cannot install OTA over a rooted rom I believe.
However, I came from Paranoid Android and followed the advice here, and it worked perfectly. Was able to keep root and TWRP.
http://forum.xda-developers.com/showpost.php?p=68314164&postcount=69
oeusr said:
You should flash back to stock and update. Cannot install OTA over a rooted rom I believe.
However, I came from Paranoid Android and followed the advice here, and it worked perfectly. Was able to keep root and TWRP.
http://forum.xda-developers.com/showpost.php?p=68314164&postcount=69
Click to expand...
Click to collapse
currently on CM13.1 nightly I'm going to follow what you did. Hope it will work
I was rooted I use this post, and the is a link in that thread to the actual zip your will need, and also you must have the updated TWRP as well. All the information is in that thread. but that is literally it.
Download update zip
Download Flashfire
download new TWRP
Back up you crap ( will not wipe SD card unless you tell it to )
Run FlashFire, set setting correctly
run it, you will already be rooted when done
set dev mode
re-flash new TWRP
PROFIT
Did you get the option "Restore boot and recovery images" when setting Flash OTA zip? I just got Auto mount and Mount /system read/write.
pdolo5784 said:
Do I download update Ota then install on rooted rom, or flash Back to stock and update
Click to expand...
Click to collapse
You can use Flashfire to flash OTA file
i don't get the option to restore boot and recovery images. is that ok ?
pdolo5784 said:
Do I download update Ota then install on rooted rom, or flash Back to stock and update
Click to expand...
Click to collapse
If you have Xposed just get Android N-ify and it's just like having 7.0
Anyone updated from DP5 / systemless root / TWRP?
And flashed zip for adaway to work.
What are the steps to update with ota zip?
Yes and everything is ok. Follow the steps carm01 suggests some post above. Its easy and at least for me everything worked. After fisrt boot you can go to TWRP and flash everything else you need.
blackra1n said:
If you have Xposed just get Android N-ify and it's just like having 7.0
Click to expand...
Click to collapse
Not really other then a couple of options.
Sent from my Nexus 5X using Tapatalk
milan187 said:
Not really other then a couple of options.
Click to expand...
Click to collapse
You can get the same experience without going through the trouble of upgrading and then having to root again etc. I personally like it but we all have opinions
blackra1n said:
You can get the same experience without going through the trouble of upgrading and then having to root again etc. I personally like it but we all have opinions
Click to expand...
Click to collapse
I used it months ago so there could be a lot of changes to it since then?
I don't believe the new notifications are there? Quick pull down? It's also nice that it takes up a GB less for system as well.
What rom are you on?
Sent from my Nexus 5X using Tapatalk
milan187 said:
I used it months ago so there could be a lot of changes to it since then?
I don't believe the new notifications are there? Quick pull down? It's also nice that it takes up a GB less for system as well.
What rom are you on?
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
The notifications are definitely there, so is quick pull down It's updated frequently so I'm sure the experience is the same
I'm running Dirty Unicorns 6.0.1 with ElementalX kernel
blackra1n said:
The notifications are definitely there, so is quick pull down It's updated frequently so I'm sure the experience is the same
I'm running Dirty Unicorns 6.0.1 with ElementalX kernel
Click to expand...
Click to collapse
I just looked at N-Fy, pretty impressive. Good for them.
Sent from my Nexus 5X using Tapatalk
milan187 said:
I just looked at N-Fy, pretty impressive. Good for them.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
They've definitely done a great job