Related
HI i just root my phone sony xperia z1 compact D5503_14.4.A.0.108 firmware.
then install xposed framework
use the module cyanlockscreen.
what happen is the lock screen pattern won't unlock even i draw the same pattern.
try to boot into recovery but not success.
i think cannot use adb shell since usb debugging off..
wifi off.
already try many method still no result.
able to receive call and answer
camera functioning.
try to flash zip in sdcard , but how? cannot boot to recovery.
could anybody advise me the possible solution.
Have you installed a recovery?
XperienceD said:
Have you installed a recovery?
Click to expand...
Click to collapse
install twrp
hi,
I had rooted my Canvas A1, and unrooted it from the super Su, Now I don't have root access but when I tried to the OTA update it showed error,Am currently on LMY47V, Now i tried to use your method but when i reboot into recovery and select recovery mode its showing NO Command Found, can you please help me...
Thanks
I was having the exact same problem. I did the following and this worked for me.
1. Unlocked bootloader using Android one toolkit.
2. rooted again and installed twrp recovery, took full backup.
3. Flashed kitkat stock rom using sp flash tools.
4. Locked bootloader using Android One toolkit.
5. got the update notification right away. ~444 mb.
Successfully updated to Marshmallow.
Let me know if you need further help.
Dalekv7 said:
I was having the exact same problem. I did the following and this worked for me.
1. Unlocked bootloader using Android one toolkit.
2. rooted again and installed twrp recovery, took full backup.
3. Flashed kitkat stock rom using sp flash tools.
4. Locked bootloader using Android One toolkit.
5. got the update notification right away. ~444 mb.
Successfully updated to Marshmallow.
Let me know if you need further help.
Click to expand...
Click to collapse
unlocking bootloader will wipe all the date right ??
shyamkrrish66166 said:
hi,
I had rooted my Canvas A1, and unrooted it from the super Su, Now I don't have root access but when I tried to the OTA update it showed error,Am currently on LMY47V, Now i tried to use your method but when i reboot into recovery and select recovery mode its showing NO Command Found, can you please help me...
Thanks
Click to expand...
Click to collapse
STEP 1: DOWNLOAD the FLASH TOOL from this this link :LINK TO DOWNLOAD FILE
It is almost 30 MB in Size. And EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) of your computer.
STEP 2: DOWNLOAD LOLLIPOP FLASH FILE
DOWNLOAD LINK FOR LOLLIPOP: HERE
After downloading this flash file EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) on your computer.
STEP 3: NOW INSTALL DRIVERS:
YOU NEED TO BE ON WINDOWS 7 TO INSTALL DRIVERS (WINDOWS 8 DOESN'T SUPPORT THIS DRIVER / PHONE IS NOT DETECTED)
DOWNLOAD DRIVERS from this link : HERE
EXTRACT AND INSTALL THE DRIVERS : Next next next and finish If you see an security warning ( a red coloured pop up ) choose INSTALL IT ANYWAY
IT IS RECOMMENDED YOU TO RESTART YOUR PC.
STEP 4:
Now we have Extrated /unziped 2 files. One is FLASHTOOLS and other is FLASH FILE and Extracted it or unziped it to Desktop or Somewhere.
One of it having the name SP_Flash_Tool_exe_windows_v5.1424.00 or open both folders then one of it having the flashing tool. OPEN THE FOLDER NAMED SP_Flash_Tool_exe_windows_v5.1424.00
it contains an application named fashtool.exe OPEN IT
NOW THE APPLICATION IS ASKING FOR SCATTER LOADING FILE
its a txt file which is on the extracted flash file folder
BROWSE it by clicking Button named Scatter Loading
click OPEN
STEP 5:
HERE IN THE DROPDOWN BOX, IT SAYS DOWNLOAD ONLY, CLICK ON IT AND SELECT FIRMWARE UPDATE ONLY.
IF YOU SELECT FORMAT + DOWNLOAD, THEN YOU WILL LOOSE IMEI NUMBER.
NOW CLICK DOWNLOAD BUTTON ( GREEN ARROWED BUTTON NAMED DOWNLOAD )
IN CASE YOU LOOSE IMEI NUMBER, THEN REFER HERE
STEP 6:
Now SWITCH OFF your PHONE and REMOVE BATTERY
STEP 7:
CONNECT your PC via USB CABLE
wait for the driver Detection.
THE FLASHING PROCESS WILL START AUTOMATICALLY you can See the progress in progress bar which is on bottom of flashing tool Application.
WHEN IT IS FINISHED DISCONNECT USB AND RESTART YOUR PHONE.
NOW YOU WILL GET LOLLIPOP UPDATE IMEDIATELY.
:good::good:HIT THANKS IF HELPED!:good::good:
This is the screen I am getting when I enter recovery mode
Dalekv7 said:
I was having the exact same problem. I did the following and this worked for me.
1. Unlocked bootloader using Android one toolkit.
2. rooted again and installed twrp recovery, took full backup.
3. Flashed kitkat stock rom using sp flash tools.
4. Locked bootloader using Android One toolkit.
5. got the update notification right away. ~444 mb.
Successfully updated to Marshmallow.
Let me know if you need further help.
Click to expand...
Click to collapse
this is the screen I am getting when I enter recovery mode
shyamkrrish66166 said:
This is the screen I am getting when I enter recovery mode
Click to expand...
Click to collapse
After entering recovery mode, you will see a dead android bot. Below, you will see NO COMMAND
Here, hold down the power button and press the volume up button once. Then release both buttons.
Now, you are successfully in recovery mode.
:good::good:HIT THANKS IF HELPED:good::good:
shyamkrrish66166 said:
this is the screen I am getting when I enter recovery mode
Click to expand...
Click to collapse
Just follow the method suggested by Raizen above. But there are two things I want to add:-
1. The drivers work successfully on windows 8 and 10. It's just that you have to turn off driver signature verification for a while. So don't worry if you have w8 or 10.
2. After flashing kitkat you will get a notification to update to Marshmallow and not lollipop.
P.s.- My opinion on Marshmallow- Everything's fine except the battery backup. I don't know if the issue has been resolved now. But I faced more than 30% drain overnight with location and WiFi off. I'm on CyanogenMod 12.1 now and I find it much better both in terms of battery backup and functionality.
Thanks guys. I will try it and let you know.
Dalekv7 said:
Just follow the method suggested by Raizen above. But there are two things I want to add:-
1. The drivers work successfully on windows 8 and 10. It's just that you have to turn off driver signature verification for a while. So don't worry if you have w8 or 10.
2. After flashing kitkat you will get a notification to update to Marshmallow and not lollipop.
P.s.- My opinion on Marshmallow- Everything's fine except the battery backup. I don't know if the issue has been resolved now. But I faced more than 30% drain overnight with location and WiFi off. I'm on CyanogenMod 12.1 now and I find it much better both in terms of battery backup and functionality.
Click to expand...
Click to collapse
Thanks. .. I will try it and let you knw
Raizen12465 said:
After entering recovery mode, you will see a dead android bot. Below, you will see NO COMMAND
Here, hold down the power button and press the volume up button once. Then release both buttons.
Now, you are successfully in recovery mode.
:good::good:HIT THANKS IF HELPED:good::good:
Click to expand...
Click to collapse
Raizen12465 said:
After entering recovery mode, you will see a dead android bot. Below, you will see NO COMMAND
Here, hold down the power button and press the volume up button once. Then release both buttons.
Now, you are successfully in recovery mode.
:good::good:HIT THANKS IF HELPED:good::good:
Click to expand...
Click to collapse
Hi , one more doubt, I had rooted my phone ,later I unrooted it from the super su ,now I don't have root access, can I root it again in the normal way, I used kingoroot but it failed,
thanks
shyamkrrish66166 said:
Hi , one more doubt, I had rooted my phone ,later I unrooted it from the super su ,now I don't have root access, can I root it again in the normal way, I used kingoroot but it failed,
thanks
Click to expand...
Click to collapse
You can use kingroot or android one toolkit to root your phone if you are running KITKAT or LOLLIPOP.
To root MARSHMALLOW, you need to follow the steps mentioned HERE
:good::good:
I wanna tell u to use battery doctor to save ur battery with its new feature ''super optimize' , I m using it and only 8-10% drain out in one night with data on.
Sent from my Micromax AQ4501 using xda premium
---------- Post added at 06:13 PM ---------- Previous post was at 06:09 PM ----------
Dalekv7 said:
Just follow the method suggested by Raizen above. But there are two things I want to add:-
1. The drivers work successfully on windows 8 and 10. It's just that you have to turn off driver signature verification for a while. So don't worry if you have w8 or 10.
2. After flashing kitkat you will get a notification to update to Marshmallow and not lollipop.
P.s.- My opinion on Marshmallow- Everything's fine except the battery backup. I don't know if the issue has been resolved now. But I faced more than 30% drain overnight with location and WiFi off. I'm on CyanogenMod 12.1 now and I find it much better both in terms of battery backup and functionality.
Click to expand...
Click to collapse
I wanna tell u to use battery doctor to save ur battery with its new feature ''super optimize' , I m using it and only 8-10% drain out in one night with data on.
Sent from my Micromax AQ4501 using xda premium
shyamkrrish66166 said:
Thanks. .. I will try it and let you knw
Click to expand...
Click to collapse
Hi,
In marshmallow is there an option to use as card as the internal memory, so that we could install more apps ??
shyamkrrish66166 said:
hi,
I had rooted my Canvas A1, and unrooted it from the super Su, Now I don't have root access but when I tried to the OTA update it showed error,Am currently on LMY47V, Now i tried to use your method but when i reboot into recovery and select recovery mode its showing NO Command Found, can you please help me...
Thanks
Click to expand...
Click to collapse
Hey man ...after showing no command
Press power+ vol up for 5 sec and release
U will be in recovery menu
Hit thanks
I'm trying to flash firmware in Karbonn Sparkle V (Android One) but it is not getting connected with computer. I installed the drivers manually in the computer but when i connect the device, the computer trying to install the device driver software again and getting failed. How to solve the problem?
yes this works
Raizen12465 said:
After entering recovery mode, you will see a dead android bot. Below, you will see NO COMMAND
Here, hold down the power button and press the volume up button once. Then release both buttons.
Now, you are successfully in recovery mode.
:good::good:HIT THANKS IF HELPED:good::good:
Click to expand...
Click to collapse
This method works thanks!!!?
Can anyone please give me any helpers on the easiest way to Root and install TWRP on my H815, Im in the UK and Im running MM 20a official rom.
I have rooted other phones but not this is a new phone and isn't as straight forward as my G2 was.
Thanks in advance.
awes0me1 said:
Can anyone please gibe me any helpers on the easiest way to Root and install TWRP on my H815, Im in the UK and Im running MM 20a official rom.
I have rooted other phones but not this is a new phone and isn't as straight forward as my G2 was.
Thanks in advance.
Click to expand...
Click to collapse
https://youtu.be/epcXXkMPRWk
If u go with step by step it willbe easier make sure to download correct files
Sent from my LG-H815 using Tapatalk
Thank you for responding... I noticed the file I need to download (the big 4 gig image file is h815 10c which is LP.... but I'm on MM . Do I need to down grade of us there a for for MM?
Thanks again.
Sent from my LG-H815 using Tapatalk
awes0me1 said:
Thank you for responding... I noticed the file I need to download (the big 4 gig image file is h815 10c which is LP.... but I'm on MM . Do I need to down grade of us there a for for MM?
Thanks again.
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
Worked for me .
Use the newest .zip = v.2.62-3[GUIDE]ROOT Your LG Marshmallow ROM With Systemless ROOT. No More ExFAT Issues!
dohouch said:
Worked for me .
Use the newest .zip = v.2.62-3[GUIDE]ROOT Your LG Marshmallow ROM With Systemless ROOT. No More ExFAT Issues!
Click to expand...
Click to collapse
Thanks for responding...
I think I need to be already rooted to use this method, dp I not ?
I need to root and install twrp.
When i had my G2, the forums was buzzing with new Roms, it was pretty much a bullet proof phone, i was hoping for the same with the G4, pretty gutted that its so quiet in these forums for this phone.
awes0me1 said:
Thanks for responding...
I think I need to be already rooted to use this method, dp I not ?
I need to root and install twrp.
When i had my G2, the forums was buzzing with new Roms, it was pretty much a bullet proof phone, i was hoping for the same with the G4, pretty gutted that its so quiet in these forums for this phone.
Click to expand...
Click to collapse
No. Just install twrp. Reboot into twrp and install supersu. Be sure to not let twrp auto-install anything to root your phone.
Jens1969 said:
No. Just install twrp. Reboot into twrp and install supersu. Be sure to not let twrp auto-install anything to root your phone.
Click to expand...
Click to collapse
I've just installed twrp through fastboot, how do i boot into recovery please?
awes0me1 said:
how do i boot into recovery please?
Click to expand...
Click to collapse
Hope your TWRP sticks, I'm new to this and it took me 3 attempts to get it to stick.
To get into recovery
Hold both power button and volume down button pressed
At first sight of LG logo release power button 1 second, Still holding volume down, then repress power button.
You should now get white screen with just 2 options, select "Reset" , Select with Power button, scroll with volume up/down
Again get white screen and confirm reset
If TWRP is on phone it should now appear.
If its not you are in for a Factory Reset
:
Now do a default backup in TWRP (very handy this)
Then move systemless root zip to phone.
In twrp select install find your "systemless root zip " flash , then reboot using "System" DO not accept option to root your phone offered after selecting- reboot>system.
Hope its goes well
dohouch said:
Hope your TWRP sticks, I'm new to this and it took me 3 attempts to get it to stick.
To get into recovery
Hold both power button and volume down button pressed
At first sight of LG logo release power button 1 second, Still holding volume down, then repress power button.
You should now get white screen with just 2 options, select "Reset" , Select with Power button, scroll with volume up/down
Again get white screen and confirm reset
If TWRP is on phone it should now appear.
If its not you are in for a Factory Reset
:
Now do a default backup in TWRP (very handy this)
Then move systemless root zip to phone.
In twrp select install find your "systemless root zip " flash , then reboot using "System" DO not accept option to root your phone offered after selecting- reboot>system.
Hope its goes well
Click to expand...
Click to collapse
Yeah for some reason TWRP isn't sticking...tried 4 times now.
Im using 'adb reboot recovery' command and there is no recovery
I think im doing it right....thanks for your help btw, its much appreciated
Can you point me to the Twrp version you used ? Im wondering if im flashing wrong version ??
awes0me1 said:
Can you point me to the Twrp version you used ? Im wondering if im flashing wrong version ??
Click to expand...
Click to collapse
This is my TWRP twrp-2.8.7.0-h815.img
Have a look at this post
dohouch said:
This is my TWRP twrp-2.8.7.0-h815.img
Have a look at this post
Click to expand...
Click to collapse
I am on the same boat as OP. I unlocked the bootloader after updating to Marshmallow, so I didn't have TWRP from Lollipop. Now, even though it says that the flashing went okay, there is no recovery to boot into. Using "adb reboot recovery" it shows the android logo with the exclamation mark. If I do it using the hardware buttons, I get the LG's menu to wipe everything or exit.
Dante897 said:
I am on the same boat as OP. I unlocked the bootloader after updating to Marshmallow, so I didn't have TWRP from Lollipop. Now, even though it says that the flashing went okay, there is no recovery to boot into. Using "adb reboot recovery" it shows the android logo with the exclamation mark. If I do it using the hardware buttons, I get the LG's menu to wipe everything or exit.
Click to expand...
Click to collapse
Yes...ive tried 10 times now and still no recovery. It says "OK" in adb after flash but no recovery.
Any ideas?
Sent from my LG-H815 using Tapatalk
Dante897 said:
I am on the same boat as OP.
Click to expand...
Click to collapse
If you have root there are many apps on play store such as : quick boot, simple boot, quick reboot. Install one of these and and they all all have options for reboot, hotboot, boot to recovery, etc. etc.
I have TWRP on my phone and if I use the standard way to enter recovery , power+volume down, then I will get the standard LG recovery screen but when I accept the recovery options there, it takes me to TWRP
dohouch said:
If you have root there are many apps on play store such as : quick boot, simple boot, quick reboot. Install one of these and and they all all have options for reboot, hotboot, boot to recovery, etc. etc.
I have TWRP on my phone and if I use the standard way to enter recovery , power+volume down, then I will get the standard LG recovery screen but when I accept the recovery options there, it takes me to TWRP
Click to expand...
Click to collapse
That's the problem, I don't have root. I need TWRP to flash the SuperSU zip, don't I?
EDIT: Wait, do I need to say yes on the stock LG recovery first? The one that says wipe everything?
Dante897 said:
That's the problem, I don't have root. I need TWRP to flash the SuperSU zip, don't I?
EDIT: Wait, do I need to say yes on the stock LG recovery first? The one that says wipe everything?
Click to expand...
Click to collapse
@ Dante897 No, if you don't have TWRP then don't. don't say yes to LG Recovery or you'll loose everything . You can also run TWRP on your PC and install systemless root zip that way. That maybe what I did, I can't exactly remember now.
I'm off to bed now, last night was a late night too.
I figured it out. You aren't supposed to flash the recovery., you are supposed to boot to it, flash SuperSU and then use Flashify to install TWRP. I did that, but I flashed the wrong SuperSU (I am an idiot I know) and my phone won't boot now. Currently I am in download mode and downloading the rom with LG Bridge . You can follow the guide here if you want http://forum.xda-developers.com/g4/general/unlock-bootloader-install-twrp-root-t3128241 but whatever you do DO NOT flash SuperSU 2.46, grab the newest from here http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
I cannot say that it will work, all I can tell you is that 2.46 certainly doesn't work.
EDIT: Alright, I let LG Bridge install the update, no wipe happened. I did the process again, this time I flashed SuperSU v2.62-3 and everything went well and my phone is now rooted.
awes0me1 said:
Yeah for some reason TWRP isn't sticking...tried 4 times now.
Im using 'adb reboot recovery' command and there is no recovery
I think im doing it right....thanks for your help btw, its much appreciated
Can you point me to the Twrp version you used ? Im wondering if im flashing wrong version ??
Click to expand...
Click to collapse
I also had an issue with TWRP sticking. I followed someone else's tip and you have to have the twrp IMG saved on your computer and also on the phone before flashing recovery with fastboot.
Sent from my LG-H815 running CM13
Dante897 said:
I figured it out. You aren't supposed to flash the recovery., you are supposed to boot to it, flash SuperSU and then use Flashify to install TWRP. I did that, but I flashed the wrong SuperSU (I am an idiot I know) and my phone won't boot now. Currently I am in download mode and downloading the rom with LG Bridge . You can follow the guide here if you want http://forum.xda-developers.com/g4/general/unlock-bootloader-install-twrp-root-t3128241 but whatever you do DO NOT flash SuperSU 2.46, grab the newest from here http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
I cannot say that it will work, all I can tell you is that 2.46 certainly doesn't work.
EDIT: Alright, I let LG Bridge install the update, no wipe happened. I did the process again, this time I flashed SuperSU v2.62-3 and everything went well and my phone is now rooted.
Click to expand...
Click to collapse
Finally managed to do it, thank you and everybody for all your help. Anyone else having trouble follow Dante897's post.
Thanks again
I was previously on cm12.0 but wanted to get back to stock for 6.0.1. Got back to stock but now I can't stand the bloat. Has anyone rooted the stock 6.0.1 yet?
jawz101 said:
I was previously on cm12.0 but wanted to get back to stock for 6.0.1. Got back to stock but now I can't stand the bloat. Has anyone rooted the stock 6.0.1 yet?
Click to expand...
Click to collapse
Just flash TWRP with Odin then flash the supersu zip through TWRP.
Thanks. I got through it all. It's been a while since I've rooted this tablet. My Linux laptop and Virtualbox eventually played nice. Also, apparently any old cord doesn't work. I had to use the original Samsung USB cable for Download Mode to work.
Root SM-T800 6.0.1 with TWRP
paulshriner said:
Just flash TWRP with Odin then flash the supersu zip through TWRP.
Click to expand...
Click to collapse
Thanks for the heads-up..
As I've never used TWRP before (always rooted with Chainefire''s CF-Auto-Root still not available for SM-T800 6.0.1), could you please post a quick step-by-step on how to root the new Marshmallow 6.0.1 on a SM-T800.
Much appreciated..
terrord8158 said:
Thanks for the heads-up..
As I've never used TWRP before (always rooted with Chainefire''s CF-Auto-Root still not available for SM-T800 6.0.1), could you please post a quick step-by-step on how to root the new Marshmallow 6.0.1 on a SM-T800.
Much appreciated..
Click to expand...
Click to collapse
This link is not for our tablets but is the same process. Just make sure you find the correct TWRP version for the T800. Once you have TWRP installed find Supersu and copy it to your tablet's SD card. Use TWRP to install Supersu. http://www.cyanogenmods.org/forums/topic/install-twrp-recovery-samsung-android-using-odin/
Sent from my SM-T800 using XDA-Developers mobile app
I'm also on MM 6.0.1 having just bought this device. I'd like to install this rom:
https://forum.xda-developers.com/galaxy-tab-s/development/rom-android-6-marshmallow-tab-s-10-5-lte-t3219759
So how do I go about it please? Do I need to unlock the bootloader?
:edit: Followed the guide and got TWRP installed. Downloaded the Gapps (very slow download), SuperSu zip and Nougat rom from here. Did a wipe of dalvik, cache, data and system. Sorted. Only problem is I bought the tablet for reading comics and for some reason my comic reading apps can't "see" the cbr files on the micro SD.
So I have tried re downloading Odin and Twrp and flashing it. It passes Everytime. But when I boot to recovery with power home and vol up. It goes to Android recovery. Any tips solutions you could help me with? Thanks very much in advance
After flashing twrp in odin did you reboot to recovery ? Pretty sure u need to reboot to recovery to get it to "stick",
Otherwise I believe your tab will change it back to origanal recovery
DOWNLOAD:
1) Install the TWRP app from the Play Store or grab the apk from our website
2) Open the app, agree to the terms, and enable root access
3) Select TWRP Flash
4) Search for your device and select the version you wish to download
5) Once the download is complete, select the file (it's usually in your downloads folder) and then Flash Recovery
OR:
Most devices can be updated quickly and easily within TWRP if you already have version 2.8.4.0 or higher installed
1) Download the latest version from our website on your device
2) Reboot to TWRP
3) Hit Install and tap the "Images..." button in the lower right
4) Browse to the location of the TWRP image on your device and select it
5) Select recovery from the partition list and swipe to flash
OR:
You can find more information and download links on our website.
I had the same problem and I solved it by chance by finding a post online. It seems that after you flash TWRP with Odin it is indeed properly installed but you can't access it because when you boot into recovery it boots into Samsung's recovery. To get to TWRP you need to do the following:
1. Power off your Galaxy Tab S 10.5. Wait 6-7 seconds after screen goes off.
2. Press and hold the three buttons Power + Home + Volume down together until you see warning screen.
3. Press Volume Up to continue to download mode.
4. Reboot again pressing POWER + HOME +VOL DOWN but as soon as the screen goes blank immediately change to VOL UP whilst still holding the other buttons and wait.
5. Voila TWRP!
I hope it worked for you as it did for me.
Yes
paulshriner said:
Just flash TWRP with Odin then flash the supersu zip through TWRP.
Click to expand...
Click to collapse
I did root the. samsung galaxy sm-t800. watch my vldeo.
https://youtu.be/Ih2IifEUq84
Hey guys,
Thanks to @vanche for the modified kernel and twrp recovery and @fayiaz for the guide on how to root and @Johny Cipel for the original guide and everyone else like
@topjohnwu
@santhosh
@abdyasar
For the original twrp, root and other stuff.
Now thats out of the way
Requirements:
-Unlocked Bootloader (Moto G5 Plus with offers from Amazon won't have unlockable bootloaders but if you buy the standard model from them then you'll be fine)
-Vanche's Modified TWRP from here (http://cloud.vache-android.com/Moto/potter/TWRP/twrp-3.1.0-0-potter.img)
- Vanche's Modified Boot Kernel from here (http://cloud.vache-android.com/Moto/potter/root/potter_boot_test7.img)
- Vanche's Wifi Patch because wifi will stop working after flashing the modified boot kernel (http://cloud.vache-android.com/Moto/potter/root/wlan_custom.zip)
- Chainfires Root http://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip
--- If you already have TWRP on your phone, the one by Santosh, you must flash the one made by Vanche or it wont work and you can just download the recovery image and flash it via twrp by toggling the flash zip button on the twrp recovery install menu.
1.. Download all the three files then boot your phone into bootloader mode by holding Volume Down + Power
2. Connect your phone to your PC and then open the adb terminal wherever adb is located open command prompt at that folder
3. Place the recovery image and boot image where the adb terminal folder is located
4. Fastboot flash recovery first and then boot into recovery at least once then reboot into bootloader fastboot flash boot the modified boot image.
5. Boot into the system (May take a while for the first time after flashing the boot image).
6. Place the wlan_custom.zip into your phones internal storage
7. Boot back into recovery and then flash the zip this time
8. Then download and flash the SR3 Super Su from above using recovery and you should have root!!
Safety net may break so if you wanna use Snapchat or any other apps that use safety net make sure you login first then root. You can't logout or else you'll have to unroot and log back in.
wiping?
do we need to wipe storage in this process?
yourtitan said:
do we need to wipe storage in this process?
Click to expand...
Click to collapse
It shouldnt, But if you cant boot then you need to flash the no-verity crypt zip once
Awesomeslayerg said:
It shouldnt, But if you cant boot then you need to flash the no-verity crypt zip once
Click to expand...
Click to collapse
thanks for the reply. but i have several data in my phone. can i just unlock bootloader and root as instructed above without wiping my storage? its a task to take backup of everything. thanks in advance.
wifi not working after supersu root
wifi not working mate.. Flashed custom zip .. No use..
Dhan... said:
wifi not working mate.. Flashed custom zip .. No use..
Click to expand...
Click to collapse
Did you correctly flash vanche TWRP and boot image? Because you're supposed to do that first and then flash the wifi zip..
yourtitan said:
thanks for the reply. but i have several data in my phone. can i just unlock bootloader and root as instructed above without wiping my storage? its a task to take backup of everything. thanks in advance.
Click to expand...
Click to collapse
The phone will wipe as soon as you unlock the bootloader so best to back up first.
Sorry but what's the differences beetwen this method and magisk?
Awesomeslayerg said:
Requirements:
-Unlocked Bootloader (Amazon bought Moto G5 Plus dont have unlockable bootloaders so your out of luck)
Click to expand...
Click to collapse
Only the 'Prime Exclusive - With Offers and Ads' Amazon models don't have an unlockable bootloader, while the 'Standard Version' models can definitely be unlocked. You probably should clarify that or some will think that they can't buy from Amazon and unlock/root the phone.
Dahenjo said:
Only the 'Prime Exclusive - With Offers and Ads' Amazon models don't have an unlockable bootloader, while the 'Standard Version' models can definitely be unlocked. You probably should clarify that or some will think that they can't buy from Amazon and unlock/root the phone.
Click to expand...
Click to collapse
Will do thanks
The "Magisk method" didn't give me privileges on /system, there are some things I can do and others do not, this method gave me full root access like in the other MotoG devices? And the safetynet check fails too?
Anyway thank you very much!!
What's going to be different than magisk root?
Videon Tutorial [SuperSu]
Guys I Found This Video Tutorial For This Thread On Roting Moto g5 Plus With Super Su ------- And Worked Great For Me----- link:-
https://www.youtube.com/watch?v=TV78iWxQrRE
gr8 work mate.....I'm rooted with Magisk...wanna go with super su........do i need to
gr8 work mate.....I'm rooted with Magisk...wanna go with super su........do i need to reflash above said recovery?
will it wipe my current data on both storage?
Pls guide..........How is Moto app working with super su?
Shamith08 said:
Guys I Found This Video Tutorial For This Thread On Roting Moto g5 Plus With Super Su ------- And Worked Great For Me----- link:-
https://www.youtube.com/watch?v=TV78iWxQrRE
Click to expand...
Click to collapse
Thank you so much! This worked! Why would WiFi stop working with this boot image?
I'm
donjuro said:
Thank you so much! This worked! Why would WiFi stop working with this boot image?
Click to expand...
Click to collapse
I don't know why but you have to flash WLAN in order to get it to work
Twrp backup can't worked
I successfully rooted my moto g5 plus mobile. And TWRP INSTALL Latest supersu via. But sdcard card backup can't worked. Why can't work sdcard in twrp? I think this twrp unofficial so not supported sdcard process. Please help me. How to work sdcard backup twrp. I try mount sdcard. But can't mount sdcard. Totally I'm very tired. Please help me.
Does someone have the img file for G5/Cedric?
Awesomeslayerg said:
...Safety net may break so if you wanna use Snapchat or any other apps that use safety net make sure you login first then root. You can't logout or else you'll have to unroot and log back in.
Click to expand...
Click to collapse
Do you think that will be fixed soon with a newer version of SuperSU, or some "root hider" apps? The idea of running a phone without root is absurd/offensive/rediculous IMO, but I don't want to be denied the ability to run certain apps because the developers have the rediculous idea that running without root should be "OK" to ordinary users? This idea is extremely offensive to me!!!
Guys, I wonder why the OP is "Account currently disabled"? I hate running without root, but, it seems a bit early and not all the problems have been worked out yet, such as TWRP not accessing SDCARD yet - I think I was a little premature buying my Moto G5 Plus as we don't really have "stable" release custom ROMs or fully functioniong TWRP and to even root we have to rely on some not well known sources for kluged files to make SU work?