Related
Free Unlock For I9000 - I897 - T959 To All Users
I9000 unlock instructions
1. Power on the phone and go to Applications->Settings->About Phone->USB
settings
2. Select Mass Storage
3. Connect the phone to USB cable
4. Swipe down the top notification bar then tap “USB Connected” then select
MOUNT
5. Copy update.zip file to phone mass storage root
6. Power off the phone
7. Press Volume Up+Home+Power on key to start the phone into recovery
mode
8. Go to “apply sdcard:update.zip” using volume keys then select it using
home key
9. Power on the phone then go to Andoid Market and install Terminal
Emulator
10. Run Terminal Emulator
11. Type cat /efs/nv_data.bin >> /sdcard/nv_data.bin into terminal then type
Enter
12. Connect the phone to PC in USB Storage Mode then copy nv_data.bin file
to your pc
13. Open nv_data.bin file with any hex editor (ex. Hex workshop) then go to
address 00181460
14. There are the codes
15. Power on the phone with any unaccepted sim card inside then type in the
first code to unlock the phone
Top man!
Not that I need it, but it may come of use to my cousin whose just purchased a T-Mobile I9000.
Thanks.
I thied this method but it didn't work
cellularhut said:
Free Unlock For I9000 - I897 - T959 To All Users
I9000 unlock instructions
1. Power on the phone and go to Applications->Settings->About Phone->USB
settings
2. Select Mass Storage
3. Connect the phone to USB cable
4. Swipe down the top notification bar then tap “USB Connected” then select
MOUNT
5. Copy update.zip file to phone mass storage root
6. Power off the phone
7. Press Volume Up+Home+Power on key to start the phone into recovery
mode
8. Go to “apply sdcard:update.zip” using volume keys then select it using
home key
9. Power on the phone then go to Andoid Market and install Terminal
Emulator
10. Run Terminal Emulator
11. Type cat /efs/nv_data.bin >> /sdcard/nv_data.bin into terminal then type
Enter
12. Connect the phone to PC in USB Storage Mode then copy nv_data.bin file
to your pc
13. Open nv_data.bin file with any hex editor (ex. Hex workshop) then go to
address 00181460
14. There are the codes
15. Power on the phone with any unaccepted sim card inside then type in the
first code to unlock the phone
Click to expand...
Click to collapse
did'nt work.
there is no nv_data.bin on efs
i tried this method, it did create the nv bin file, but there is no address for 00181460 all others are there
komalattah said:
i tried this method, it did create the nv bin file, but there is no address for 00181460 all others are there
Click to expand...
Click to collapse
same here. please help
The line is the 18146D, you have there a 8 digit code, works fine.
Just replace 01 by 00 in the line 0018146x.
works on galaxy s, vibrant and s2.
maybe just flash an updated custom rom instead of doing this thing ??? odin is easy !!!
Finding update package...
Opening update package...
Installing update package...
assert failed: gtprop("ro.product.device") == "
GT-I5800" || getprop("ro.build.product") =
= "GT-I5800" || getprop("ro.product.device
") == "GT-I900" || getprop("ro.build.prod
uct") == "GT-I9000"
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Whats goin on here?
nalinbhatt said:
Whats goin on here?
Click to expand...
Click to collapse
Same result for me, Any ideas?
I get a permission denied when I type in the script in the terminal.
Any ideas?
kepz said:
I get a permission denied when I type in the script in the terminal.
Any ideas?
Click to expand...
Click to collapse
try typing su first... then yes to the root prompt (also make sure you're not connected via usb and mounted as mass storage, that makes it read only). That should solve your permission issue... but im still having my own issues with installing the zip.
anyone have any suggestions for getting this working?
@cellularhut
i use sghI897.update.zip is aborting installation in cwm.what is wrong?
is this a method to unlock the simcard, if so there's a free app in the market that does it... GalaxSim
pryerlee said:
is this a method to unlock the simcard, if so there's a free app in the market that does it... GalaxSim
Click to expand...
Click to collapse
Some time apps in playstore may delete your orginal IMEI number to 0049999 because i also face the same problem when i use this galaxy app to unlock.
At the beginning, i gave my girlfriend a galaxy ace GT-S5830i.
My Network is the Telenor, Her is the T-Mobile.
So i wanted to unlock it..
All the methods of the GT-S5830 isnt worked.
After few long days, ive found a relock method (Network Provider Change (not unlock))
Progies, you need:
- Android SDK (or simply an ADB environment, below uploaded)
- KIES (only for the drivers)
- Root file(below uploaded)
- Hex editor(Below uploaded)
First you have to root your phone.
- Copy the update.zip to SD card
- Turn off phone
- Press and hold the Home button, and the volume up button.
- Press and hold the power button, until the Galaxy Ace text appears and disappears.
- When disappears, release only the power button...
- Wait until the Galaxy Ace text appears and turns into bright yellow.
- Release all the buttons, and the recovery comes up.
-Choose the apply update from SD card, then choose the zip, you copied.
reboot your phone...
Alright, Here comes the relock procedure
- First make sure, the usb debug is turned on...
[Settings>applications>Development>USB Debugging]
and the drivers are installed correctly (if it isn't, then install KIES)
- exrtact the ADB.zip from below to C:\
- Open Start Menu, then open Run command, and write here :
cmd
Then a command prompt comes up..
The commands:
Code:
c:
cd adb
adb shell
su !! A SU windows pops up in your phone.. Allow it !!
cat dev/block/bml15 > /data/local/bml15.bin
exit
exit
adb pull data/local/
Open this link:
h t t p :// en . wikipedia . org/wiki/Mobile_Network_Code [remove the spaces]
Search for your current MCC and MNC.
and the provider, you wanted to change to.
write it down. First the MCC and then the MNC
For example i'd like to change from hungarian Telenor to hungarian T-Mobile
So for the hungarian telenor's MCC is 216 and MNC is 01 => 21601
and the hungarian T-Mobile's MCC is 216 and MNC is 30 => 21630
Extract the XVI32, you downloaded.
open it, and open the bml15.bin in your C:\ADB
Press ctrl+F
At the Text String line enter your code (my example code is: 21601)
press ok
Change it to your next code (My example next code is: 21630)
Save it as bml15_unlocked.bin
Then open your command prompt again.
Code:
c:
cd adb
adb push bml15_unlocked.bin /data/local/bml15_unlocked
adb shell
su
dd if=/data/local/bml15_unlocked of=/dev/bml15
exit
exit
Reboot your phone with the new sim card
Cuii said:
At the beginning, i gave my girlfriend a galaxy ace GT-S5830i.
My Network is the Telenor, Her is the T-Mobile.
So i wanted to unlock it..
Click to expand...
Click to collapse
much easier way in my sig, also applicable for ACE S5830i
Doky73 said:
much easier way in my sig, also applicable for ACE S5830i
Click to expand...
Click to collapse
Yes much easier thanks unlocked my S5830i no problems!! cheers!!!
Cuii said:
Code:
c:
cd adb
adb shell
su !! A SU windows pops up in your phone.. Allow it !!
cat dev/block/bml15 > /data/local/bml15.bin
exit
exit
adb pull data/local/
Click to expand...
Click to collapse
Sorry I'm fairly new to this sort of stuff, how should I enter the code?
TootyPang said:
Sorry I'm fairly new to this sort of stuff, how should I enter the code?
Click to expand...
Click to collapse
Forget about this commands, if your device is S5830i then download Galaxy Toolbox from Google Play Store! It's free...
See my sig!
Sent from my SGSII using Tapatalk 2 & Swype
... "by George Orwell"
Doky73 said:
Forget about this commands
Click to expand...
Click to collapse
some will prefer to press a button some want the hard way and finally all are winners
unfortunately I don't have a Samsung phone to test it but surely someone is to appreciate first post on this thread too !
Great post Cuii easy to follow!
I was able to pull the bml15.bin. But now when I opened it, I have trouble finding the unlocking code. It doesn't seem tho match the wikipage
Can someone tell me on which line the code can be found? It's mentioned in XVI32 on the left (in hexadecimal) and on the bottom in decimal address.
Thanks!
<edit> : never mind it turned out my new phone was already simlock free !!! it was supposed to be simlock at delivery. I guess my provider made a mistake
Thanks this has saved my mates phone (he imported it was supposed to be unlocked but it wasnt). I tried every other procedure without success but this worked. Cheers
very nice tutorial keep sharing THANKS!!!!
Did not work
Hello I tried the rooting as suggested and my phone does not turn on now. All it does is flash, I tried to flash my phone and still does the same thing after it reboots. Odin says that it passes but it still does not.
Any suggestions?
thanks
Cuii said:
At the beginning, i gave my girlfriend a galaxy ace GT-S5830i.
My Network is the Telenor, Her is the T-Mobile.
So i wanted to unlock it..
All the methods of the GT-S5830 isnt worked.
After few long days, ive found a relock method (Network Provider Change (not unlock))
Progies, you need:
- Android SDK (or simply an ADB environment, below uploaded)
- KIES (only for the drivers)
- Root file(below uploaded)
- Hex editor(Below uploaded)
First you have to root your phone.
- Copy the update.zip to SD card
- Turn off phone
- Press and hold the Home button, and the volume up button.
- Press and hold the power button, until the Galaxy Ace text appears and disappears.
- When disappears, release only the power button...
- Wait until the Galaxy Ace text appears and turns into bright yellow.
- Release all the buttons, and the recovery comes up.
-Choose the apply update from SD card, then choose the zip, you copied.
reboot your phone...
Alright, Here comes the relock procedure
- First make sure, the usb debug is turned on...
[Settings>applications>Development>USB Debugging]
and the drivers are installed correctly (if it isn't, then install KIES)
- exrtact the ADB.zip from below to C:\
- Open Start Menu, then open Run command, and write here :
cmd
Then a command prompt comes up..
The commands:
Code:
c:
cd adb
adb shell
su !! A SU windows pops up in your phone.. Allow it !!
cat dev/block/bml15 > /data/local/bml15.bin
exit
exit
adb pull data/local/
Open this link:
h t t p :// en . wikipedia . org/wiki/Mobile_Network_Code [remove the spaces]
Search for your current MCC and MNC.
and the provider, you wanted to change to.
write it down. First the MCC and then the MNC
For example i'd like to change from hungarian Telenor to hungarian T-Mobile
So for the hungarian telenor's MCC is 216 and MNC is 01 => 21601
and the hungarian T-Mobile's MCC is 216 and MNC is 30 => 21630
Extract the XVI32, you downloaded.
open it, and open the bml15.bin in your C:\ADB
Press ctrl+F
At the Text String line enter your code (my example code is: 21601)
press ok
Change it to your next code (My example next code is: 21630)
Save it as bml15_unlocked.bin
Then open your command prompt again.
Code:
c:
cd adb
adb push bml15_unlocked.bin /data/local/bml15_unlocked
adb shell
su
dd if=/data/local/bml15_unlocked of=/dev/bml15
exit
exit
Reboot your phone with the new sim card
Click to expand...
Click to collapse
thanks
Just perfect
Doky73 said:
much easier way in my sig, also applicable for ACE S5830i
Click to expand...
Click to collapse
Using Dorky's way of unlocking my GT-S5830i was exactly what I needed, so I made a sizeable donation and I won't say thank you:laugh:
Thanks
Doky73 said:
much easier way in my sig, also applicable for ACE S5830i
Click to expand...
Click to collapse
I know you said not to say thanks but are you aware of the heartache you save some ppl who are trying to unlock their phones, not to mention time. I spent hours trying to unlock my 5830i with the Root, Busybox, Galaxy Unlock method all to no avail, I kept getting that the unlock code was "or or or or" with no actual codes showing. I had convinced myself my phone could not be unlocked because of the i after the 5830 as everybody with a std 5830 seemed to be doing fine, that was until I found your great app. To be honest I have not donated as things are not that great but I will. :good:
Thanks a lot!
Succesfully unlocked my 5830.
Hi @Cuii
Extract the XVI32, you downloaded.
open it, and open the bml15.bin in your C:\ADB
Click to expand...
Click to collapse
I don't understand your mean.
When I Extract, and open downloaded file, And not have the bml15.bin !
Please help me this problem.
Thanks you
samsung galaxy ace network lock
c:
cd adb
adb shell
su !! A SU windows pops up in your phone.. Allow it !!
cat dev/block/bml15 > /data/local/bml15.bin
exit
exit
am stuck on the cmd code.
path error
hello everyone i hv custom rom cm11 4.4.3 latest rom in my phone and it come with a dual sim functionality but as i use only one sim so i dont what that other sim icon with "?" on it...
Saurabhrajoria said:
hello everyone i hv custom rom cm11 4.4.3 latest rom in my phone and it come with a dual sim functionality but as i use only one sim so i dont what that other sim icon with "?" on it...
Click to expand...
Click to collapse
open terminal
type su and grant root access
then type setprop persist.radio.multisim.config none
then reboot
rutvikrvr said:
open terminal
type su and grant root access
then type setprop persist.radio.multisim.config none
then reboot :d
Click to expand...
Click to collapse
thank you so much
Saurabhrajoria said:
thank you so much
Click to expand...
Click to collapse
hit the thanx button instead of typing it
I just recently discovered that I am doing unlock any phone through simply removing data/system/gesture.key file in recovery .
You just have to open twre and do delete that file that stores your password based data
Ha Ha Ha .... :laugh:
Simple
Isn't it?
Before continue reading I worn you
Thank you must say other wise experience BOOTLOOP.
Well
I got tested only on redmi 1s and lg p500
These are another methods :
If Just Google Ask you For Password (Credentials) - You Can Turn On WIFI Via ADB In Order To Google Accept Your Device Via this Command:
Code:
adb shell svc wifi enable
Requirements:
The Device Needs To Have Usb Debugging Enabled
In Case Usb Debugging Isn't Enabled And You Have Recovery,you Can Run The Same Instructions From Recovery
For Some methods Will Be Better If Device Is Rooted
If None Of This Methods Works For You - Unfortunally You Probably Must not Wipe Your Device please notify me first.
METHOD I
Solution For Everyone With Recovery (Cwm, Twrp, Xrec,Etc...) Installed:
INSTRUCTIONS:
1. Download this zip Pattern Password Disable (Download from google.com) on to your sdcard (using your PC, as you cant get into your phone, right )
2. Insert the sdcard into your phone
3. Reboot into recovery mode
4. Flash the zip
5. Reboot
6. Done!
Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.
METHOD 2
Solution For Everyone Without Recovery Installed - ADB :
What You Need:
=>A computer running a Linux distro or Windows+Cygwin
=>USB cable to connect your phone to the PC
=>Adb installed
How to install adb:
1. Open Terminal
2. Type:
Code:
sudo apt-get install android-tools-adb
Hit [Enter]
3. Follow the instructions until everything is installed.
INSTRUCTIONS:
1. Connect you (turned on) Phone to the Computer via USB.
2. Open a terminal window.
3. Type:
Code:
adb devices
adb shell
cd data/system
su
rm *.key
4. Done...Now You Just Have To Reboot.
Note : as above...
METHOD 3
Solution For Everyone Before Lock Accident :
SMS Bypass - Download Link - Install It On Your Device (Download from attachments)
This App Allows You To Remotely Bypass Your Phone's Screen Lock By Sending A SMS.
It Removes Your Gesture Pattern Or Password After Receiving A Preset Keyword Along With A Secret Code Via SMS.
SMS Bypass App Requires Root.
INSTRUCTIONS:
1.First, make sure you give permanent root access to the app.
2.Change the secret code to your preferred choice. The default password is : 1234
3.To reset your screen lock, send the following message from another phone:
Code:
secret_code reset
Example:
Code:
1234 reset
Note 1 : There is a space between your secret code and reset. Also the secret code is case sensitive.
Note 2 : There is an option available to change the preset keyword. Default is : reset - Your phone will restart and your lock screen will be reset.
Note 3 : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.
METHOD 4
Solution For Everyone Via Adb - SQL Command :
INSTRUCTIONS:
=>Type This Commands Separated In Your Terminal (CMD Prompt) :
Code:
adb shell
cd /data/data/com.android.providers.settings/databases
sqlite3 settings.db
update system set value=0 where name='lock_pattern_autolock';
update system set value=0 where name='lockscreen.lockedoutpermanently';
.quit
=>Now You Just Have To Reboot.
METHOD 5
Solution For Everyone Via Adb - File Removal :
INSTRUCTIONS:
=>Type This Command In Your Terminal (CMD Prompt) :
Code:
adb shell rm /data/system/gesture.key
Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.
METHOD 6
Solution For Everyone With USB Debugging Enabled :
INSTRUCTIONS:
Primary Step for all method:
Download & Extract to anywhere - Bypass Security Hack (Download from attachments)
Open SQLite Database Browser 2.0.exe in SQLite Database Browser.
Run pull settings.db.cmd inside By-pass security Hacks folder to pull out the setting file out of your phone.
Drag settings.db and drop to SQLite Database Browser 2.0.exe program.
Navigate to Browse data tab, At table there, click to list down the selection & selete secure
Instruction To Remove Pattern Lock:
Now, find lock_pattern_autolock, Delete Record
Close & save database
Run push settings.db.cmd and reboot your phone
Instruction To Remove PIN Lock:
Now, Find Or Create lockscreen.password_type, double-click & change it's value to 65536, Apply changes!
Now, find lock_pattern_autolock, Delete Record, If doesn't exist, Ignore
Close & save database
Run push settings.db.cmd and reboot your phone
Instruction To Remove Password Lock:
Now, find lockscreen.password_salt, Delete Record
Now, find lockscreen.password_type, Delete Record
Close & save database
Run push settings.db.cmd and reboot your phone
Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.
METHOD 7
Solution For Everyone With Recovery Installed :
INSTRUCTIONS:
1.Download and Copy Aroma File manager.zip (Download from attachments or http://forum.xda-developers.com/show....php?t=1646108) to your memory card.
2. Open your recovery (press volume Down + Power button or it can be different according to the phones. Generally the phones who have press able button on the middle they have to press all three buttons. Google for you pattern there are lots)
3. There’ll b an option in recovery called “mount”. Go in that option and then mount all the cache and everything it is there.
4. Then select “update” and select “apply update from SD/external” and select aroma file manger.zip file that you downloaded using above QR code above.
5. After Flashing or updating, the aroma file manger will open. Use volume keys for up/down and power button 2 select like you use to get into recovery.
6. In aroma File manager , Go to menu , which is located in bottom strip and then select Settings.
7. Go to bottom n select “mount all partition in startup ” then exit from aroma file manger.
8. Now after exit , re-update that aroma file again and it will open again.
9. Go to data >> and then System.
Then find ‘gesture.key’ (for pattern lock) and ’password.key’ (for password lock) then long touch on gesture.key or password.key and sum option will be prompted , choose delete and delete that file and restart.
Try out one by one
Tell if works on another phonephone
Pattern Disabler zip
http://forum.xda-developers.com/attachment.php?attachmentid=2532214&d=1390399283
SMS bypass app:
http://forum.xda-developers.com/attachment.php?attachmentid=2532215&d=1390399283
Bypass securities mods:
http://forum.xda-developers.com/attachment.php?attachmentid=2532216&d=1390399283
Aroma file manager :
http://forum.xda-developers.com/attachment.php?attachmentid=2532253&d=1390400421
Thank you must say other wise experience BOOTLOOP.
Thanks mate you give all working method for unlock is there
bro plz hit thanks button
niral.naik said:
I just recently discovered that I am doing unlock any phone through simply removing data/system/gesture.key file in recovery .
You just have to open twre and do delete that file that stores your password based data
Ha Ha Ha .... :laugh:
Simple
Isn't it?
Before continue reading I worn you
Thank you must say other wise experience BOOTLOOP.
Well
I got tested only on redmi 1s and lg p500
These are another methods :
If Just Google Ask you For Password (Credentials) - You Can Turn On WIFI Via ADB In Order To Google Accept Your Device Via this Command:
Code:
adb shell svc wifi enable
Requirements:
The Device Needs To Have Usb Debugging Enabled
In Case Usb Debugging Isn't Enabled And You Have Recovery,you Can Run The Same Instructions From Recovery
For Some methods Will Be Better If Device Is Rooted
If None Of This Methods Works For You - Unfortunally You Probably Must not Wipe Your Device please notify me first.
METHOD I
Solution For Everyone With Recovery (Cwm, Twrp, Xrec,Etc...) Installed:
INSTRUCTIONS:
1. Download this zip Pattern Password Disable (Download from google.com) on to your sdcard (using your PC, as you cant get into your phone, right )
2. Insert the sdcard into your phone
3. Reboot into recovery mode
4. Flash the zip
5. Reboot
6. Done!
Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.
METHOD 2
Solution For Everyone Without Recovery Installed - ADB :
What You Need:
=>A computer running a Linux distro or Windows+Cygwin
=>USB cable to connect your phone to the PC
=>Adb installed
How to install adb:
1. Open Terminal
2. Type:
Code:
sudo apt-get install android-tools-adb
Hit [Enter]
3. Follow the instructions until everything is installed.
INSTRUCTIONS:
1. Connect you (turned on) Phone to the Computer via USB.
2. Open a terminal window.
3. Type:
Code:
adb devices
adb shell
cd data/system
su
rm *.key
4. Done...Now You Just Have To Reboot.
Note : as above...
METHOD 3
Solution For Everyone Before Lock Accident :
SMS Bypass - Download Link - Install It On Your Device (Download from attachments)
This App Allows You To Remotely Bypass Your Phone's Screen Lock By Sending A SMS.
It Removes Your Gesture Pattern Or Password After Receiving A Preset Keyword Along With A Secret Code Via SMS.
SMS Bypass App Requires Root.
INSTRUCTIONS:
1.First, make sure you give permanent root access to the app.
2.Change the secret code to your preferred choice. The default password is : 1234
3.To reset your screen lock, send the following message from another phone:
Code:
secret_code reset
Example:
Code:
1234 reset
Note 1 : There is a space between your secret code and reset. Also the secret code is case sensitive.
Note 2 : There is an option available to change the preset keyword. Default is : reset - Your phone will restart and your lock screen will be reset.
Note 3 : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.
METHOD 4
Solution For Everyone Via Adb - SQL Command :
INSTRUCTIONS:
=>Type This Commands Separated In Your Terminal (CMD Prompt) :
Code:
adb shell
cd /data/data/com.android.providers.settings/databases
sqlite3 settings.db
update system set value=0 where name='lock_pattern_autolock';
update system set value=0 where name='lockscreen.lockedoutpermanently';
.quit
=>Now You Just Have To Reboot.
METHOD 5
Solution For Everyone Via Adb - File Removal :
INSTRUCTIONS:
=>Type This Command In Your Terminal (CMD Prompt) :
Code:
adb shell rm /data/system/gesture.key
Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.
METHOD 6
Solution For Everyone With USB Debugging Enabled :
INSTRUCTIONS:
Primary Step for all method:
Download & Extract to anywhere - Bypass Security Hack (Download from attachments)
Open SQLite Database Browser 2.0.exe in SQLite Database Browser.
Run pull settings.db.cmd inside By-pass security Hacks folder to pull out the setting file out of your phone.
Drag settings.db and drop to SQLite Database Browser 2.0.exe program.
Navigate to Browse data tab, At table there, click to list down the selection & selete secure
Instruction To Remove Pattern Lock:
Now, find lock_pattern_autolock, Delete Record
Close & save database
Run push settings.db.cmd and reboot your phone
Instruction To Remove PIN Lock:
Now, Find Or Create lockscreen.password_type, double-click & change it's value to 65536, Apply changes!
Now, find lock_pattern_autolock, Delete Record, If doesn't exist, Ignore
Close & save database
Run push settings.db.cmd and reboot your phone
Instruction To Remove Password Lock:
Now, find lockscreen.password_salt, Delete Record
Now, find lockscreen.password_type, Delete Record
Close & save database
Run push settings.db.cmd and reboot your phone
Note : If You See The Gesture Pattern Grid Or Password After Restarting, Don't Worry. Just Try Any Random Pattern Or Password And it Should Unlock.
METHOD 7
Solution For Everyone With Recovery Installed :
INSTRUCTIONS:
1.Download and Copy Aroma File manager.zip (Download from attachments or http://forum.xda-developers.com/show....php?t=1646108) to your memory card.
2. Open your recovery (press volume Down + Power button or it can be different according to the phones. Generally the phones who have press able button on the middle they have to press all three buttons. Google for you pattern there are lots)
3. There’ll b an option in recovery called “mount”. Go in that option and then mount all the cache and everything it is there.
4. Then select “update” and select “apply update from SD/external” and select aroma file manger.zip file that you downloaded using above QR code above.
5. After Flashing or updating, the aroma file manger will open. Use volume keys for up/down and power button 2 select like you use to get into recovery.
6. In aroma File manager , Go to menu , which is located in bottom strip and then select Settings.
7. Go to bottom n select “mount all partition in startup ” then exit from aroma file manger.
8. Now after exit , re-update that aroma file again and it will open again.
9. Go to data >> and then System.
Then find ‘gesture.key’ (for pattern lock) and ’password.key’ (for password lock) then long touch on gesture.key or password.key and sum option will be prompted , choose delete and delete that file and restart.
Try out one by one
Tell if works on another phonephone
Pattern Disabler zip
http://forum.xda-developers.com/attachment.php?attachmentid=2532214&d=1390399283
SMS bypass app:
http://forum.xda-developers.com/attachment.php?attachmentid=2532215&d=1390399283
Bypass securities mods:
http://forum.xda-developers.com/attachment.php?attachmentid=2532216&d=1390399283
Aroma file manager :
http://forum.xda-developers.com/attachment.php?attachmentid=2532253&d=1390400421
Thank you must say other wise experience BOOTLOOP.
Click to expand...
Click to collapse
Rahulraj943472 said:
Thanks mate you give all working method for unlock is there
Click to expand...
Click to collapse
bro plz hit thanks button
After a long time, I found the solution for My Huawei G8 Dual Sim phone.
Steps:
1. Just install the Rom through TWRP.
2. Run/Boot the Rom atleast once.
(Above Steps can be ignored if you are already using the rom)
3. Boot into TWRP. Then Open "Advance" and then "Terminal".
4. Type the Command " setprop persist.radio.multisim.config dsds " .
5. Reboot phone and check
To reverse the effect just open terminal and type " setprop persist.radio.multisim.config none ".
Afzal922 said:
After a long time, I found the solution for My Huawei G8 Dual Sim phone.
Steps:
1. Just install the Rom through TWRP.
2. Run/Boot the Rom atleast once.
(Above Steps can be ignored if you are already using the rom)
3. Boot into TWRP. Then Open "Advance" and then "Terminal".
4. Type the Command " setprop persist.radio.multisim.config dsds " .
5. Reboot phone and check
To reverse the effect just open terminal and type " setprop persist.radio.multisim.config none ".
Click to expand...
Click to collapse
thanks
Afzal922 said:
After a long time, I found the solution for My Huawei G8 Dual Sim phone.
Steps:
1. Just install the Rom through TWRP.
2. Run/Boot the Rom atleast once.
(Above Steps can be ignored if you are already using the rom)
3. Boot into TWRP. Then Open "Advance" and then "Terminal".
4. Type the Command " setprop persist.radio.multisim.config dsds " .
5. Reboot phone and check
To reverse the effect just open terminal and type " setprop persist.radio.multisim.config none ".
Click to expand...
Click to collapse
Has anyone tried this? Are both sims working even though the phone has only one IMEI?
anishjp said:
Has anyone tried this? Are both sims working even though the phone has only one IMEI?
Click to expand...
Click to collapse
Yes if your phone has Dual sim slots... It has no any side effects
Hello everyone one.
Please I have a single SIM S8plus, I wish to find out if, ' if flash a dual SIM ROM into the phone' will it now be a dual SIM S8plus?
Please, I have a single SIM S8plus, SM G955F, how to I convert it to use Dual SIM?
Hello everyone. So I discovered that it could be very difficult for us at time to get response to our questions, because the persons who can help are maybe hardly on Google but could be on other social media platforms as Facebook, Twitter, Telegram, etc. So I created a telegram account, that can house about 200000 participants. So I wish we can all join there and communicate, so that Incase of delays in response from our main XDA website, we can quickly find aid on the telegram page.
The link is below:.
Mod edit: TG link removed as per XDA's Telegram Chat Rules.