Hello Community,
I am sharing fully working touch twrp 2.8.6.0 for ze550kl, z00ld.
I have ported from other device, any command may not be work.
I have tested most commands & those works very well. TWRP for ze550kl Unofficial link is below
https://drive.google.com/file/d/0Bz46tV6s-sImQmZSVGJWei1MMzA/view?usp=sharing
if you want to test recovery then use command
Code:
fastboot boot twrp_ze550kl.img
if want to use recovery permanently, then use command
Code:
fastboot flash recovery twrp_ze550kl.img
if someone had any issue after flashing recovery, stock recovery is attached.
https://drive.google.com/file/d/0Bz46tV6s-sImZkpaakMwVWd3cFU/view?usp=sharing
for ze551kl
https://drive.google.com/file/d/0Bz46tV6s-sImdHVQNDcwRGN4THc/view?usp=sharing
http://forum.xda-developers.com/showpost.php?p=64441364&postcount=9
I, xda & any other concern party will not be responsible for any loss or damage, I would suggest first try this recovery then flash it.
If there is any credit, goes to original developer.
You are allowed to share it, give proper credit to developer.
Hit thanks if my posts helps you.
Great work, next step compiling cm-12.1
destilant said:
Great work, next step compiling cm-12.1
Click to expand...
Click to collapse
thanks friend.
this work in ZE551KL model?
pedrazadixon said:
thanks friend.
this work in ZE551KL model?
Click to expand...
Click to collapse
Hope so, you tell it, just boot it, do not flash it
rajlko said:
Hope so, you tell it, just boot it, do not flash it
Click to expand...
Click to collapse
not work in ZE551KL, touch is outdated.
Thank you anyway. your work is valuable.
pedrazadixon said:
not work in ZE551KL, touch is outdated.
Thank you anyway. your work is valuable.
Click to expand...
Click to collapse
Please share snapshot, if you have.
Also share your stock recovery.
rajlko said:
Please share snapshot, if you have.
Also share your stock recovery.
Click to expand...
Click to collapse
The resolutions are different.
ZE550KL is HD 1280x720 - 267dpi
ZE551KL is FullHD 1920x1080 - 401dpi
pedrazadixon said:
The resolutions are different.
ZE550KL is HD 1280x720 - 267dpi
ZE551KL is FullHD 1920x1080 - 401dpi
How To Extract Stock Recovery?
Click to expand...
Click to collapse
Attach the stock recovery of ZE551KL. thanks for your help.
pedrazadixon said:
Attach the stock recovery of ZE551KL. thanks for your help.
Click to expand...
Click to collapse
Please try this.
rajlko said:
Please try this.
Click to expand...
Click to collapse
this work friend. I have made a backup and all goes well.
I am pending of testing.
- flash a zip
- restore backup.
in a few minutes i can test this.
thanks for your work friend. :highfive:
Since many ZenFone 2 models have a planned upgrade to Android 6, could a phone with an unlocked bootloader be able to root Android 6.0 when it is released for the device? (by booting TWRP and flashing Superuser ZIP file)
xyberz09 said:
Since many ZenFone 2 models have a planned upgrade to Android 6, could a phone with an unlocked bootloader be able to root Android 6.0 when it is released for the device? (by booting TWRP and flashing Superuser ZIP file)
Click to expand...
Click to collapse
for more info please read this thread.
http://forum.xda-developers.com/apps/supersu/wip-android-6-0-marshmellow-t3219344
pedrazadixon said:
this work friend. I have made a backup and all goes well.
I am pending of testing.
- flash a zip
- restore backup.
in a few minutes i can test this.
thanks for your work friend. :highfive:
Click to expand...
Click to collapse
Report:
I use this ZE551KL custom recovery to flash official xposed framework zip and this work perfect , I also flash Dolby ATMOS and flash normally .
- TWRP recovery by @rajlko work fine
- Flash a zip work fine
- Wipe partitions work fine
- Make a backup work fine
- Root by @rajlko work fine
- Official Xposed work fine
- GravityBox LP work fine
I am pending of testing.
- Restore from a Backup
My device: Asus Zenfone 2 Laser ZE551KL (Z00TD)
Thank you very much for your work @rajlko :good:
Go ahead!
for me, it just freeze on the menu, cannot press anything, zenfone selfie ZE551KL Z00UD user here
jellyfeels said:
for me, it just freeze on the menu, cannot press anything, zenfone selfie ZE551KL Z00UD user here
Click to expand...
Click to collapse
Please read first post with caution & use proper build.
jellyfeels said:
for me, it just freeze on the menu, cannot press anything, zenfone selfie ZE551KL Z00UD user here
Click to expand...
Click to collapse
your devices is ZE551KL or ZD551KL?
Z00UD is corresponding to Zenfone Selfie model.
pedrazadixon said:
your devices is ZE551KL or ZD551KL?
Z00UD is corresponding to Zenfone Selfie model.
Click to expand...
Click to collapse
ops, sorry, its ZD551KL, thanks for correcting me
jellyfeels said:
ops, sorry, its ZD551KL, thanks for correcting me
Click to expand...
Click to collapse
use twrp for ze551kl, it should work.
if not then share your stock recovery.
pedrazadixon said:
Report:
I use this ZE551KL custom recovery to flash official xposed framework zip and this work perfect , I also flash Dolby ATMOS and flash normally .
- TWRP recovery by @rajlko work fine
- Flash a zip work fine
- Wipe partitions work fine
- Make a backup work fine
- Root by @rajlko work fine
- Official Xposed work fine
- GravityBox LP work fine
I am pending of testing.
- Restore from a Backup
My device: Asus Zenfone 2 Laser ZE551KL (Z00TD)
Thank you very much for your work @rajlko :good:
Go ahead!
Click to expand...
Click to collapse
There are only one TRWP.xxxx.img file on the OP - did you use that on your ZE551KL ?
I am not clear about it - all the other files are .zip.
Which file did you flash on your ZE551KL device ?
With Fastboot, correct?
Update: I flashed the TRWP_ZE550kl.IMG file on my ZE551KL - It booted - but the touch screen is not responding at all...
Ideas?
Thanks
bert269 said:
There are only one TRWP.xxxx.img file on the OP - did you use that on your ZE551KL ?
I am not clear about it - all the other files are .zip.
Which file did you flash on your ZE551KL device ?
With Fastboot, correct?
Update: I flashed the TRWP_ZE550kl.IMG file on my ZE551KL - It booted - but the touch screen is not responding at all...
Ideas?
Thanks
Click to expand...
Click to collapse
It has been mentioned already, wrong screen resolution. Use the one for ZE551KL. Read the OP again. If it is zipped, then unzip it.
Posted using my phone.
Related
Hey everyone. This is TWRP recovery that I compiled for the Galaxy E5 lte version (SM-E500F.)
It has been tested in F and M variant
curently tested on :
1.SM-E500F
2.SM-E500M
you can test it on your phone and report here if its working for you.I will then add it to the list.
Disclaimer:
If you have decided to install this recovery on your device, I cannot be held responsible for any damage done to your phone and/or for any other kind of inconveniences you may experience (bricks,.). By installing this custom ROM you lose your phone's warranty.
By installing this, you accept this disclaimer.
Click to expand...
Click to collapse
>>HOW TO FLASH VIA ODIN:
1)Boot into download mode by pressing volume down,home button and power on button
2)start odin and connect phone with the usb cable
3)put the recovery package in AP or PDA tab.
4)check that only F.reset time and Auto reboot are checked
5)Flash and enjoy.:angel:
ISSUES:
-brightness is not yet working
-reboot to recovery boots back to system.
'
DOWNLOAD:
For SM-E500F
SM-E500F TWRP
Click to expand...
Click to collapse
For SM-E500M
SM-E500M twrp
Click to expand...
Click to collapse
Credits:
TWRP: for creating the awesome recovery
@eabz2000 : for help and testing
@Bin.g dallie
Press thanks if it was useful to you
Device tree
Kernel source
Tested on variant SM-E500M.
- Brightness not working.
- But reboot to system is working perfect.
only for e5? nothing for e7?
Chaninoza said:
only for e5? nothing for e7?
Click to expand...
Click to collapse
Dont worry @Chaninoza. I have both E5 and E7 . I will compile for E7 after Its stable enough. It will be in couple of weeks.
Make a CWM for galaxy E5-E500H 5.1.1
Sent from my SM-E500H using Tapatalk
Sabbir. said:
Make a CWM for galaxy E5-E500H 5.1.1
Sent from my SM-E500H using Tapatalk
Click to expand...
Click to collapse
Sabbir. TWRP for SM-E500H already exists. Here is link: http://forum.xda-developers.com/galaxy-e-series/orig-development/recovery-twrp-galaxy-e5-t3209865
Help
Sabbir. said:
Help
Click to expand...
Click to collapse
Qhat help do you need?
Can't ifnd file
My Odin isn't recognizing the .img file
iPepita said:
My Odin isn't recognizing the .img file
Click to expand...
Click to collapse
Use flashify for flashing the img file
nepalbiraj said:
Dont worry @Chaninoza. I have both E5 and E7 . I will compile for E7 after Its stable enough. It will be in couple of weeks.
Click to expand...
Click to collapse
the rom E500M works in E700M ? 5.1.1
LudwigFerdinand18 said:
the rom E500M works in E700M ? 5.1.1
Click to expand...
Click to collapse
no E500M rom doesnot work on E700M
nepalbiraj said:
no E500M rom doesnot work on E700M
Click to expand...
Click to collapse
for example I pick up a rom from another cell by TWRP backup and modify the build.prop ... work just changing the partition / system?
LudwigFerdinand18 said:
for example I pick up a rom from another cell by TWRP backup and modify the build.prop ... work just changing the partition / system?
Click to expand...
Click to collapse
You can try and see if it boots.
It's working on 4.4.4 and 5.1.1 you don't need to worry about it
Without using odin
You can install it from your phone ? Without using odin
The development team TeamWin - TWRP has created a new version of TWRP 3.0.0-0 Released for a variety of smart phones, including our .tak how many smartphones, not all all works correctly. With regard to our Samsung GT-I9300I Galaxy S III Duos, incorrectly stated the date created backup-a, since its establishment, it is better to change the date on the real, not to get confused later. In the setting of the TWRP, you need to set the time zone UTC +12 for the proper display time of your zone.
For flashing TWRP 3.0.0-0 use Flashify program: Flashify (for root users) or Rashr: ®Rashr - Flash Tool. Remove from the archive file using any file manager.
Added file to Flash via recovery
In to TWRP 2.8.7.0 , too - the same bug.
You can do a zip installed by recovery?
example:
package_extract_file("recovery.img", "/dev/block/platform/msm_sdcc.1/by-name/recovery");
It is not possible?
Renix63 said:
You can do a zip installed by recovery?
example:
package_extract_file("recovery.img", "/dev/block/platform/msm_sdcc.1/by-name/recovery");
It is not possible?
Click to expand...
Click to collapse
It may be . Now do
simple use this: https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager
MAXSIMUS96 said:
It may be . Now do
Click to expand...
Click to collapse
Thanks :good:
kingroot to root my Mobile S3 neo Dual GT-i9300i
is risk method ya No Risk
Bootloop any Demege
plzz suggest
Install twrp with odin. Then supersu via recovery
Inviato dal mio GT-I9301I utilizzando Tapatalk
Will this work on an i9301i? Might be helpful to clarify that.
aelfinn said:
Will this work on an i9301i? Might be helpful to clarify that.
Click to expand...
Click to collapse
this for i9300i only
MAXSIMUS96 said:
this for i9300i only
Click to expand...
Click to collapse
I have it on I9301I and works good.
Fact - I downloaded file from TWRP site.
Gt-I9300i Not Working your TWRP .My mobile root
kingroot app this root My Mobile
Ali Asgar said:
Gt-I9300i Not Working your TWRP .My mobile root
kingroot app this root My Mobile
Click to expand...
Click to collapse
Install twrp with odin!!!!
Inviato dal mio GT-I9301I utilizzando Tapatalk
after flashing with Flashify, my phone reboot and go to download mode, try to remove the batter and restart, still at the download mode, can't get in, any clue ????
*My phone is i9300I, android 4.3, Recovery: TWRP 2.7.1.0
One suggestion I have just tried out that people here might appreciate: Install official TWRP 3.0 via TWRP Manager (install from Google Play). Seems to work without a problem on my i9301i.
aelfinn said:
Will this work on an i9301i? Might be helpful to clarify that.
Click to expand...
Click to collapse
badboyblue said:
after flashing with Flashify, my phone reboot and go to download mode, try to remove the batter and restart, still at the download mode, can't get in, any clue ????
*My phone is i9300I, android 4.3, Recovery: TWRP 2.7.1.0
Click to expand...
Click to collapse
It's for 4.4.4
if I have 5.5.9 RR lollipop .....
I can update the TWRP that I have
I'm using 2.8.4.0 without fear of some brick ??????
frank1980 said:
if I have 5.5.9 RR lollipop .....
I can update the TWRP that I have
I'm using 2.8.4.0 without fear of some brick ??????
Click to expand...
Click to collapse
I had RR 5.5.8 and I flashed this version but from TWRP site - in this thread meybe is only for KK 4.4.4..
Check THIS and instal img file in TWRP is an option "flash img file" on the right bottom in menu Instal.
nalas said:
I had RR 5.5.8 and I flashed this version but from TWRP site - in this thread meybe is only for KK 4.4.4..
Check THIS and instal img file in TWRP is an option "flash img file" on the right bottom in menu Instal.
Click to expand...
Click to collapse
:good:thanks man but i have a GT I9300I neo dual sim
no have some problem??? sorry my bad english thanks
frank1980 said:
:good:thanks man but i have a GT I9300I neo dual sim
no have some problem??? sorry my bad english thanks
Click to expand...
Click to collapse
I think TWRP 3.0.0.0 works great even on I9300I .
Hey guys!
In order to make it clear where one can get official Marshmallow for the Alcatel Idol 3 5.5, I decided to make this thread!
Big thanks to [MENTION]Alek Dev[/MENTION],who managed to share an update.zip from a 6045I owner.
The original update.zip would remove fastboot commands,so it made installing TWRP and getting root impossible.
However,thanks to [MENTION]murigny64[/MENTION] ,we managed to make the zip not delete the TWRP recovery while installing. Therefore,now we can have Marshmallow and TWRP!
I suggest you backup your partitions(especially the radio one,since some users lost 4G after installing the firmware of a American model-6045I) and HERE is the post explaining it all!
Without further ado,here it is!
Just make a factory reset after the rom boots!
Big thanks to famewolf for creating flashable variant-specific zips containing our modems,found HERE
Also,to get root,you have to type this command in the TWRP terminal:
Code:
echo SYSTEMLESS=true >> /data/.supersu
,reboot recovery and flash
this specific version of SuperSU!
Aaaaaand,to be able to switch between fastboot capabilities and MM,go HERE
Hi, can i install in 6045y? If "yes" can u put the steps, i have 5.0 stock
The Marionette said:
Hey guys!
In order to make it clear where one can get official Marshmallow for the Alcatel Idol 3 5.5, I decided to make this thread!
Big thanks to [MENTION]Alek Dev[/MENTION],who managed to share an update.zip from a 6045I owner.
The original update.zip would remove fastboot commands,so it made installing TWRP and getting root impossible.
However,thanks to [MENTION]murigny64[/MENTION] ,we managed to make the zip not delete the TWRP recovery while installing. Therefore,now we can have Marshmallow and TWRP!
Without further ado,here it is!
Just make a factory reset after the rom boots!
Also,to get root,you have to flash this specific version of SuperSU!
Click to expand...
Click to collapse
So we finally get MM with TWRP AND ROOT.i will tomorrow test it because i will must buy usb-otg cable to install it (sd card dead)
Is Kernel Adiutor working with kernel that's inside the build ? I'm afraid that my screen will look washed out after the flash of M. Can somebody check if is the saturation option tunable ? Thank you.
Nikola Jovanovic said:
Is Kernel Adiutor working with kernel that's inside the build ? I'm afraid that my screen will look washed out after the flash of M. Can somebody check if is the saturation option tunable ? Thank you.
Click to expand...
Click to collapse
I worried about the same thing.
But on M,colors a re a lot more vivid, at least to me. There is also an option in Settings to change color vividness.
Hi,
you managed to activate the dual sim option ?
and I have to wipe anything before flash de update.zip?
thanks
Enviado do meu 6045K através de Tapatalk
So will this work on any Idol 3? Or just that variant.
relvas18 said:
Hi,
you managed to activate the dual sim option ?
and I have to wipe anything before flash de update.zip?
thanks
Enviado do meu 6045K através de Tapatalk
Click to expand...
Click to collapse
Edit the build.prop. And no,just flash the zip. Then do a factory reset and flash SuperSU. On Marshmallow it's impossible to isntall SuperSU into system,so it has to go into the data folder. So,if you do a factory reset after installing SuperSU,you will lose root.
axne1 said:
So will this work on any Idol 3? Or just that variant.
Click to expand...
Click to collapse
It is compatible with all variants,although it will say "6045I" in Settings.
Life is easier with gravity box etc..... Please provide link to correct flashable Xposed zip and apk.. When you find time. Greetings
Thank you so much. again. Great Job man.....
LucasNoob said:
Life is easier with gravity box etc..... Please provide link to correct flashable Xposed zip and apk.. When you find time. Greetings
Thank you so much. again. Great Job man.....
Click to expand...
Click to collapse
I just googled "Xposed Marshmallow" .-____-.
http://forum.xda-developers.com/showthread.php?t=3034811
Anyhow, please test the rom,I need to know if it's broken or not while I have time to correct anything!
The Marionette said:
I just googled "Xposed Marshmallow" .-____-.
Anyhow, please test the rom,I need to know if it's broken or not while I have time to correct anything!
Click to expand...
Click to collapse
http://dl-xda.xposed.info/framework/sdk23/arm64/
so many. i dont know with one ?
LucasNoob said:
http://dl-xda.xposed.info/framework/sdk23/arm64/
so many. i dont know with one ?
Click to expand...
Click to collapse
On the bottom is the latest one(v85)
Sent from my 6045I using Tapatalk
LucasNoob said:
Life is easier with gravity box etc..... Please provide link to correct flashable Xposed zip and apk.. When you find time. Greetings
Great!!
regards.
MM
Click to expand...
Click to collapse
I need specific version of the twrp? To install update.
The Marionette said:
Edit the build.prop. And no,just flash the zip. Then do a factory reset and flash SuperSU. On Marshmallow it's impossible to isntall SuperSU into system,so it has to go into the data folder. So,if you do a factory reset after installing SuperSU,you will lose root.
It is compatible with all variants,although it will say "6045I" in Settings.
Click to expand...
Click to collapse
Hi.
Witch values I need to change on build.prop for dual sim 6045K.
Thanks!!
regards.
MM
mlamendes said:
Hi.
Witch values I need to change on build.prop for dual sim 6045K.
Thanks!!
regards.
MM
Click to expand...
Click to collapse
Code:
persist.radio.multisim.config
Sent from my 6045I using Tapatalk
The Marionette said:
Code:
persist.radio.multisim.config
Sent from my 6045I using Tapatalk
Click to expand...
Click to collapse
Sorry Marionette.
persist.radio.multisim.config=? (change "single" for wich value?) Dual?
Thanks regarding your reply.
MM
mlamendes said:
Sorry Marionette.
persist.radio.multisim.config=? (change "single" for wich value?) Dual?
Thanks regarding your reply.
MM
Click to expand...
Click to collapse
persist.radio.multisim.config=dsds
So, just to clarify, just flash the Marshmallow update file from this thread with TWRP? Can I flash it over CM 12.1 or should I factory wipe, then flash?
Thanks
Jaguar92 said:
So, just to clarify, just flash the Marshmallow update file from this thread with TWRP? Can I flash it over CM 12.1 or should I factory wipe, then flash?
Thanks
Click to expand...
Click to collapse
Read the thread. It all writes what you have asked for.
Sorry, it was answered in the other thread.
So, first flash M, then factory reset after the initial boot. Then install the 2.62 super su from the first post.
Also I've read that some users got md5 error. Maybe they have to flash the 3.0.0-1 TWRP by Unjustified Dev.
hey guys! I just Uploaded this stock rom.
I already edited this one, so the others that unable to edit the firmware package from asus can simply download this and flash via recovery (e.g TWRP)
hope it helps!
Build .094
LINK: https://www.mediafire.com/file/eorjham5jj4wns5/stock_094.zip/file
Build .097
LINK: https://www.mediafire.com/file/hbaps1nm8hfwn5e/stock_097.zip/file
kayamokid said:
hey guys! I just Uploaded this stock rom.
I already edited this one, so the others that unable to edit the firmware package from asus can simply download this and flash via recovery (e.g TWRP)
hope it helps!
LINK: https://drive.google.com/open?id=19Y3Sk5wGs4EsMpQCWrULawo8OJvqiDKY
Click to expand...
Click to collapse
What SKU version is this?
Has anyone tried this. Please review and post here. I m on latest havoc OS, can I install it ? Last time I tried official pie,it messed a lot of things. Also please tell what sort of bugs were resolved after the latest 064 update.?
X10MINISTER said:
What SKU version is this?
Click to expand...
Click to collapse
its IN /RU. I'm from philippines and thats whats I get from asus PH.
anilyarki said:
Has anyone tried this. Please review and post here. I m on latest havoc OS, can I install it ? Last time I tried official pie,it messed a lot of things. Also please tell what sort of bugs were resolved after the latest 064 update.?
Click to expand...
Click to collapse
I tried this. I just use twrp and:
- wipe system data cache internal (for clean internal storage )
- flash this firmware. (just like typhical custom roms)
- reboot to recovery ( to check if its reverted to stock recovery)
- reboot.
Will it lock the bootloader and unroot the phone??
Will the official ota work??
koppisetty shravan said:
Will it lock the bootloader and unroot the phone??
Will the official ota work??
Click to expand...
Click to collapse
no, you must relock it.
kayamokid said:
its IN /RU. I'm from philippines and thats whats I get from asus PH.
Click to expand...
Click to collapse
How abt the VoLTE function? Is it enabled by default?
is this debloated rom or you just removed the assert line??
Zach Seretika said:
How abt the VoLTE function? Is it enabled by default?
Click to expand...
Click to collapse
I dunno sir. this is just a typhical firmware from asus. I just edited the updater to be able to flash this via TWRP.
Karvrock said:
is this debloated rom or you just removed the assert line??
Click to expand...
Click to collapse
I just removed the assert line sir.
Glad that I flashed this one . Here is a quick review for all those who have questions about this.
1. Stable rom. Can easily be used as a daily driver.
2. Gcam 6.024 fully supported. Even the front cam works. Night mode works l, no lags what so ever.
3. Volte function is supported . Dual volte supported.
4. Flashing this rom will not lock your bootloader or remove custom recovery. So have fun.
5. Battery back up is amazing. Can last up to 6hrs of pubg play with frame rates set to high.
6. All banking apps working for me.
7. Rooted with latest magisk 19.1
8. Audio output is decent.
Things that didn't work
1. WhatsApp video calling lag. This stupid bug has made its way in official firmware as well. Not sure how to resolve it. Rest all gr8
Will you provide support for all the ota and make it twrp flashable ???
Sent from my OnePlus5T using XDA Labs
Amanpreetsingh said:
Will you provide support for all the ota and make it twrp flashable ???
Sent from my OnePlus5T using XDA Labs
Click to expand...
Click to collapse
i'll try my very best in the future.
thank you! I really wanted to use the stable pie but before I always failed flashing through TWRP even though I edited the script.
if it doesn't support OTA and the latest version has been updated, are you going to make this flashable script again?
Deadley said:
thank you! I really wanted to use the stable pie but before I always failed flashing through TWRP even though I edited the script.
if it doesn't support OTA and the latest version has been updated, are you going to make this flashable script again?
Click to expand...
Click to collapse
Yes.
Quick question, do you have to flash decrypt zip again before/after flashing stock? I already did use decrypt once before. Now I'm currently on Havoc. Thanks!
bratboo said:
Quick question, do you have to flash decrypt zip again before/after flashing stock? I already did use decrypt once before. Now I'm currently on Havoc. Thanks!
Click to expand...
Click to collapse
NOT required if you are using pbrp. Flash it if using twrp.
anilyarki said:
NOT required if you are using pbrp. Flash it if using twrp.
Click to expand...
Click to collapse
How about whatsapp video call issue
---------- Post added at 11:07 AM ---------- Previous post was at 11:01 AM ----------
kayamokid said:
Yes.
Click to expand...
Click to collapse
Whatsapp videocall still lag?
WhatsApp video call lag is there. I have found a solution now but I have already changed to arrow OS. Can you try this a let us know if it works.
Edit build.prop inside vendor folder
Than add com.whatsapp or package name of any whatsapp mod to line camera.hal1.packagelist
Reboot, if still lagging, edit the name of camera.hal1.packagelist to vendor.camera.hal1.packagelist
It will help others of someone could try this.
Any suggest or work TWRP with Miui 11 Riva ? I ask this because yesterday i have succed to unlock bootloader with miui 11 on my riva. But when i was flash some twrp,even orange fox recovery v.9,it won't appear as normal twrp,just show up red or blue screen then become dim to dark screen. Please,i need some help !
Try the one posted here somewhere by fenfen.. it worked for me.
How about funcionality of it's twrp ? Is it work for flash rom ( stock/custom ) ?
This on works fine. No issues. https://drive.google.com/file/d/1-8lZA1zUrur_PT5AvRkd8eKrz8rVTzv7/view?usp=drivesdk
rez3vil said:
Try the one posted here somewhere by fenfen.. it worked for me.
Click to expand...
Click to collapse
Thanks bro,it's work like charm,now i'm use twrp by fenfrens after searching on web,i've found his twrp on AFH. It's really work twrp,even for flash img file eg; cust.img,persist.img etc. I want to thank u so much for him,but no post on riva's forum related to him
Iyan Tl said:
Thanks bro,it's work like charm,now i'm use twrp by fenfrens after searching on web,i've found his twrp on AFH. It's really work twrp,even for flash img file eg; cust.img,persist.img etc. I want to thank u so much for him,but no post on riva's forum related to him
Click to expand...
Click to collapse
You're welcome. I use this now though, offers much more tools and features. Try it, it's awesome.
https://forum.xda-developers.com/xiaomi-redmi-5a/development/twrp-3-2-3-2-riva-oreo-t3892510
rez3vil said:
You're welcome. I use this now though, offers much more tools and features. Try it, it's awesome.
https://forum.xda-developers.com/xiaomi-redmi-5a/development/twrp-3-2-3-2-riva-oreo-t3892510
Click to expand...
Click to collapse
No option for flash cust partition,on stock miui 11 rom,we need cust partition for region spesific in our device,not cust on vendor partition like custom or miui 10 oreo
NaAnBcEhEuL9A8K7 said:
This on works fine. No issues. https://drive.google.com/file/d/1-8lZA1zUrur_PT5AvRkd8eKrz8rVTzv7/view?usp=drivesdk
Click to expand...
Click to collapse
Thanks,it's work fine on miui 11 oreo,there's only one thing that annoying,orangefox always encrypt internal storage in our device