Hello.
The other night I applied 3 software updates to Android and ended up with an unusable phone. The updates (I assume) were like this: http://forum.xda-developers.com/tmobile-htc-one-m8/help/3-software-updates-t3268014
After the phone rebooted a couple times, it got stuck at the white HTC logo screen (I ended up falling asleep and the phone was like the after waking up, so stuck for about 6 hours) and wouldn't respond to just holding the power button. I had to hold power + vol up to get it to restart. After restarting it now boots to a black screen. It is possible to get to HBOOT and TWRP but I can't get adb to recognize it anymore so I'm not sure how to go about getting fixes on the phone.
The phone was running a custom recovery (clockwork recovery) and rooted. I then tried to get it back to stock to apply the Android 5.0 RUU and then used TWRP without flashing the recovery to root the phone again. My guess is that something about that process might have messed with something that one of the software updates was updating.
So, I have two questions:
1. Is it possible to recover files (pictures, for exampl) off the internal sd? Like I said, I cannot get adb (or windows) to recognize the phone, though it does show in the windows device manager.
2. If it's not possible to get recover those files, how can I get the phone usable at all?
Can you get it into the boot loader?
Yes, luckily I can get to the bootloader.
hatbocs said:
Yes, luckily I can get to the bootloader.
Click to expand...
Click to collapse
If so once in the bootloader can you use something like:
fastboot boot twrp-2.8.7.0.img
to boot into twrp? (note twrp-2.8.7.0.img is the filename of the twrp image that I saved it as, yours might be different)
If you can boot into twrp then you can install a rom/backup. also you could use, I think, something like "fastboot flash recovery twrp-2.8.7.0.img" as well.
-brad
I'm at work so I can't test this again to make 100% sure but if fastboot works like ADB then my phone doesn't show.
I do currently have TWRP installed however windows does not see the phone.
So if twrp works, you should be able to use that to connect to your pc. If not go and buy an OTG usb drive. Copy a Rom onto it, and then connect it to your phone. One time I messed my phone up and I used this method.
Worth a try. I'm in the middle of moving and that box of stuff isn't in this house. So I'll have to wait to report back. Thanks for the help so far.
Related
I've done about 3 hours of research on this forum and the internet in general, and I can't seem to find a situation like the one I'm in. I'm not particularly savvy at all of this, but have successfully rooted a few phones and have played with a variety of ROMs for both tablet and phone. I have the Android SDK installed, the drivers for my phone installed on my computer, PDANet, the works. I'm on a Windows 7 laptop.
I had a new JRO03L ROM build for my verizon GNex flashed, and was getting quicker than expected battery drain. So I decided to flash a custom kernel. I must have flashed the incorrect version of this kernel.
When I rebooted after flashing the kernel in CWM, it went into a bootloop on the Google screen. I waited an hour, pulled the battery and tried to boot into hboot (volume down+power button). Lo and behold, I can't get back into CWM! I have no option to enter recovery, I'm only able to start the boot process.
So I plug it into my computer, hoping that I might be able to use the GNex Toolkit (v7.8) to restore to stock and start over, or even just try to use fastboot to ... do something - anything! - and my computer doesn't recognize my phone when in hboot. When in hboot, my device manager recognizes the phone as "SAMSUNG Mobile USB CDC Composite Device" and as a modem. When I start the boot process and it is bootlooping, my computer recognizes it as my phone, but can't install the drivers properly.
Any help would be greatly appreciated, even if you can get me back to stock. I have a nandroid backup on my SDCard; I just need to be able to get to it and flash it. I would be forever in your debt if you can help me out! Thank you in advance!
rs18 said:
I've done about 3 hours of research on this forum and the internet in general, and I can't seem to find a situation like the one I'm in. I'm not particularly savvy at all of this, but have successfully rooted a few phones and have played with a variety of ROMs for both tablet and phone. I have the Android SDK installed, the drivers for my phone installed on my computer, PDANet, the works. I'm on a Windows 7 laptop.
I had a new JRO03L ROM build for my verizon GNex flashed, and was getting quicker than expected battery drain. So I decided to flash a custom kernel. I must have flashed the incorrect version of this kernel.
When I rebooted after flashing the kernel in CWM, it went into a bootloop on the Google screen. I waited an hour, pulled the battery and tried to boot into hboot (volume down+power button). Lo and behold, I can't get back into CWM! I have no option to enter recovery, I'm only able to start the boot process.
So I plug it into my computer, hoping that I might be able to use the GNex Toolkit (v7.8) to restore to stock and start over, or even just try to use fastboot to ... do something - anything! - and my computer doesn't recognize my phone when in hboot. When in hboot, my device manager recognizes the phone as "SAMSUNG Mobile USB CDC Composite Device" and as a modem. When I start the boot process and it is bootlooping, my computer recognizes it as my phone, but can't install the drivers properly.
Any help would be greatly appreciated, even if you can get me back to stock. I have a nandroid backup on my SDCard; I just need to be able to get to it and flash it. I would be forever in your debt if you can help me out! Thank you in advance!
Click to expand...
Click to collapse
Post three of my guide.
Push another rom.zip to your phone and flash it (if you don't already have one there).
If you have one...You're not getting into the correct menu.
You're in ODIN.
Bootloader/Recovery is BOTH volume buttons.
Jubakuba said:
Post three of my guide.
Push another rom.zip to your phone and flash it (if you don't already have one there).
If you have one...You're not getting into the correct menu.
You're in ODIN.
Bootloader/Recovery is BOTH volume buttons.
Click to expand...
Click to collapse
Thank you. I'm an idiot. It's been a long while since I've put this into recovery via physical buttons.
By the way, your guide is excellent. How have I not stumbled across this?
followed a tutorial (Cnncted's youtube clip - How to root the ASUS ZenFone 2 ) to root
Accidentally (very stupid) pressed the update option when an OTA update showed up yesterday (Jul 8 2015), and after that the phone won't start properly - stopped at in search of incredible...
No luck with trying to boot into recovery mode (power + volume up). It just vibrates once and the screen is black. Trying to flash recovery image with ADB and flashtool etc, but the MTP usb connection failed. If I connect it to the PC using the USB cable and then press the power button to turn it on (stuck in that ..."incredible" screen), device manager shows the Z200AD name with a yellow exclamation mark beside, and Asus ZenUI software will automatically start. But it's not really recognized by the PC.
So...if you have any suggestions for me to try, please let me know and that would be greatly appreciated!
Harry
p.s. This is a US version, so the it's the WW sku?
Same problem here. I have a rooted 551ML and on July 6th I received an OTA update. I installed it and I'm stuck in boot loop. I have hundreds of family pictures in the internal memory.
The good news is that I have access to boot loader and recovery.
I could not find any custom recovery for Zenfone 2. They are not out yet, right? Is there any way to copy the internal memory of the phone (that doesnt load the OS) to the SD card? Or to paste a file img.boot taken from a downloaded official rom and copy it over the corrupted one on the phone's memory?
If you can access the bootloader, you can do this:
http://forum.xda-developers.com/zenfone2/general/guide-to-apply-ota-bootloop-rooted-zf2-t3127835
Btw, there is a custom recovery out there (TWRP, check the Development section), but you will need an unlocked bootloader to use it in your state (I think).
US version is the WW SKU btw. Hope this helps.
joel.maxuel said:
If you can access the bootloader, you can do this:
http://forum.xda-developers.com/zenfone2/general/guide-to-apply-ota-bootloop-rooted-zf2-t3127835
Btw, there is a custom recovery out there (TWRP, check the Development section), but you will need an unlocked bootloader to use it in your state (I think).
US version is the WW SKU btw. Hope this helps.
Click to expand...
Click to collapse
Joel, thanks a lot! I will give it a try.
fingers and toes crossed...
I faced this problem too. All I did was to flash the boot.img of my version using fastboot,
Then I flashed the firmware, without factory reset I started the phone.
I was continiously getting an error "com.android.process has stopped". Ignoring that, I just backed up my whole data. Did a factory reset. Updated
Boom!! Everything was normal... I hope this helps
Just a quick update - followed the method in the link that Joel referred to, and everything worked beautifully. I did get two error messages like “the contact stopped working..." “The process android.process.acore has stopped working.” I fixed this problem by clearing the data/cache from the "contact" app, and that did the trick without a factory reset etc.
I unrooted the device using SuperSU. The fastboot screen, however, still shows a random serial number 0123456789ABCDEF. Is there a way to revert it back to the real one? I do see the real one from settings - about - status.
xxmmx said:
Joel, thanks a lot! I will give it a try.
fingers and toes crossed...
Click to expand...
Click to collapse
xxmmx said:
Just a quick update - followed the method in the link that Joel referred to, and everything worked beautifully. I did get two error messages like “the contact stopped working..." “The process android.process.acore has stopped working.” I fixed this problem by clearing the data/cache from the "contact" app, and that did the trick without a factory reset etc.
I unrooted the device using SuperSU. The fastboot screen, however, still shows a random serial number 0123456789ABCDEF. Is there a way to revert it back to the real one? I do see the real one from settings - about - status.
Click to expand...
Click to collapse
Isn't everyone serial number the same? mine is.
This is something that I am not sure of. Yours has been rooted as well?
I would like to know what the fastboot screen looks like before rooting.
GGL-Daz said:
Isn't everyone serial number the same? mine is.
Click to expand...
Click to collapse
xxmmx said:
This is something that I am not sure of. Yours has been rooted as well?
I would like to know what the fastboot screen looks like before rooting.
Click to expand...
Click to collapse
Pretty sure rooting didn't affect my fastboot screen at all.
actually i rooted my zenfone 2 and there was an OTA and i tried to install it without un-rooting my phone. the phone would not turn on and it gets stuck in the boot animation.
the phone wasn't detected by the ADB in my pc so i thought of installing some custom recovery, thought that could help.
i tried installing TWRP but i did not unlock the bootloader and now i am not able to enter in recovery mode either, everytime i try to get in the recovery modethe phone restarts and goes to fastboot mode.
please help.
dip_anker said:
actually i rooted my zenfone 2 and there was an OTA and i tried to install it without un-rooting my phone. the phone would not turn on and it gets stuck in the boot animation.
the phone wasn't detected by the ADB in my pc so i thought of installing some custom recovery, thought that could help.
i tried installing TWRP but i did not unlock the bootloader and now i am not able to enter in recovery mode either, everytime i try to get in the recovery modethe phone restarts and goes to fastboot mode.
please help.
Click to expand...
Click to collapse
I was having a similar issue where adb wouldn't recognize my phone but fastboot was detecting it. What I ended up doing was grabbing the latest stock firmware zip from asus, transferring it to my external sd card via adapter and renamed it to MOFD_SDUPDATE.zip. Then go into fastboot (restart with volume up key) and proceed to recovery. It should automatically update your system from there. The only bummer is having to re-configure everything.
5ifty1 said:
I was having a similar issue where adb wouldn't recognize my phone but fastboot was detecting it. What I ended up doing was grabbing the latest stock firmware zip from asus, transferring it to my external sd card via adapter and renamed it to MOFD_SDUPDATE.zip. Then go into fastboot (restart with volume up key) and proceed to recovery. It should automatically update your system from there. The only bummer is having to re-configure everything.
Click to expand...
Click to collapse
i tried it with prerooted as well as the stock rom, it did not work for me. isn't there any way to flash CM12.1 using the fastboot ?
The backstory: I have no experience with rooting and or flashing custom ROMs. Prior to today my ze551ml was completely stock, running on the official android M update. I had a need to do a factory reset, but the phone would simply reboot. I assumed this was a problem with the update so I download and attempted to install the downgrade to l. Naturally it crashed mid downgrade and I thought it to be bricked. So, I started Googling and realized I was able to get into fastboot mode, but not recovery. Following a guide I located I attempted to flash the preroot ROM located at the link below:
http://forum.xda-developers.com/zenfone2/development/rom-pre-root-img-t3079590
Well, it appeared to have worked, but now the phone refused to boot at all after being turned off. So, more Googling and I proceeded to follow the full unbricking guide below:
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Partway through step 1.3 the phone restarted itself and booted right up into Android L! Success I thought to myself, but it was not to be. I proceeded to download the FOTA L update and it downloaded fine, but when I clicked to install it simply rebooted the phone. Tried a couple of other times with the same result. I realized that Supersu was installed so I did the full unroot assuming that was the problem, but to no avail. It appears that the updates can't install because the phone is incapable of entering fastboot or recover mode. Anytime I attempt to enter fastboot via hard key or through adb the phone hangs on the ASUS logo. Adb detects the phone when it's connected via USB, but of course fastboot can't because I can't get it into fastboot mode at all.
Any tips on how to get fastboot operational again so I can start applying updates again? Every guide I've located has started with "boot into fastboot/recovery" which simply isn't an option. Any help is appreciated.
Edit: Well, I think I've reached the end of the internet trying to google for a solution. The phone works, but it looks like it's stuck on build 2.13.40.13 until the end of its life. If anybody has any ideas I'm still hoping for a solution, but I can't find anything describing how to restore fastboot if the OS is intact.
kidnova said:
The backstory: I have no experience with rooting and or flashing custom ROMs. Prior to today my ze551ml was completely stock, running on the official android M update. I had a need to do a factory reset, but the phone would simply reboot. I assumed this was a problem with the update so I download and attempted to install the downgrade to l. Naturally it crashed mid downgrade and I thought it to be bricked. So, I started Googling and realized I was able to get into fastboot mode, but not recovery. Following a guide I located I attempted to flash the preroot ROM located at the link below:
http://forum.xda-developers.com/zenfone2/development/rom-pre-root-img-t3079590
Well, it appeared to have worked, but now the phone refused to boot at all after being turned off. So, more Googling and I proceeded to follow the full unbricking guide below:
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Partway through step 1.3 the phone restarted itself and booted right up into Android L! Success I thought to myself, but it was not to be. I proceeded to download the FOTA L update and it downloaded fine, but when I clicked to install it simply rebooted the phone. Tried a couple of other times with the same result. I realized that Supersu was installed so I did the full unroot assuming that was the problem, but to no avail. It appears that the updates can't install because the phone is incapable of entering fastboot or recover mode. Anytime I attempt to enter fastboot via hard key or through adb the phone hangs on the ASUS logo. Adb detects the phone when it's connected via USB, but of course fastboot can't because I can't get it into fastboot mode at all.
Any tips on how to get fastboot operational again so I can start applying updates again? Every guide I've located has started with "boot into fastboot/recovery" which simply isn't an option. Any help is appreciated.
Edit: Well, I think I've reached the end of the internet trying to google for a solution. The phone works, but it looks like it's stuck on build 2.13.40.13 until the end of its life. If anybody has any ideas I'm still hoping for a solution, but I can't find anything describing how to restore fastboot if the OS is intact.
Click to expand...
Click to collapse
You have to use full unbrick method(xfstk + raw) to restore ur device fully
xfstk will restore ur fastboot image
yakub234go said:
You have to use full unbrick method(xfstk + raw) to restore ur device fully
xfstk will restore ur fastboot image
Click to expand...
Click to collapse
Thanks for the response. I've tried this a dozen times, but unfortunately (this is going to sound weird) since it's not completely bricked it is only detected as Moorefield for a few seconds when started. This allows the xfstk tool to detect it and begin the download, but not long enough to complete the process so it times out. The only development access I have to the phone now is via adb, but since I don't have root I'm very limited in what I can do via command line. Since I can't access fastboot I can't achieve root. It's just a comedy of errors now.
kidnova said:
The backstory: I have no experience with rooting and or flashing custom ROMs. Prior to today my ze551ml was completely stock, running on the official android M update. I had a need to do a factory reset, but the phone would simply reboot. I assumed this was a problem with the update so I download and attempted to install the downgrade to l. Naturally it crashed mid downgrade and I thought it to be bricked. So, I started Googling and realized I was able to get into fastboot mode, but not recovery. Following a guide I located I attempted to flash the preroot ROM located at the link below:
http://forum.xda-developers.com/zenfone2/development/rom-pre-root-img-t3079590
Well, it appeared to have worked, but now the phone refused to boot at all after being turned off. So, more Googling and I proceeded to follow the full unbricking guide below:
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Partway through step 1.3 the phone restarted itself and booted right up into Android L! Success I thought to myself, but it was not to be. I proceeded to download the FOTA L update and it downloaded fine, but when I clicked to install it simply rebooted the phone. Tried a couple of other times with the same result. I realized that Supersu was installed so I did the full unroot assuming that was the problem, but to no avail. It appears that the updates can't install because the phone is incapable of entering fastboot or recover mode. Anytime I attempt to enter fastboot via hard key or through adb the phone hangs on the ASUS logo. Adb detects the phone when it's connected via USB, but of course fastboot can't because I can't get it into fastboot mode at all.
Any tips on how to get fastboot operational again so I can start applying updates again? Every guide I've located has started with "boot into fastboot/recovery" which simply isn't an option. Any help is appreciated.
Edit: Well, I think I've reached the end of the internet trying to google for a solution. The phone works, but it looks like it's stuck on build 2.13.40.13 until the end of its life. If anybody has any ideas I'm still hoping for a solution, but I can't find anything describing how to restore fastboot if the OS is intact.
Click to expand...
Click to collapse
seems like you did not install droidboot.bin correctly... only way is use xFSTK again.i have updated the link to latest raw firmware 2.20.40.194 and use the same guide and commands..
sukhwant717 said:
seems like you did not install droidboot.bin correctly... only way is use xFSTK again.i have updated the link to latest raw firmware 2.20.40.194 and use the same guide and commands..
Click to expand...
Click to collapse
The problem is that it's only recognized as Moorefield for a few seconds which isn't enough time for xFSTK to complete the install. Do you know of a way to force the device to stay connected as Moorefield?
kidnova said:
The problem is that it's only recognized as Moorefield for a few seconds which isn't enough time for xFSTK to complete the install. Do you know of a way to force the device to stay connected as Moorefield?
Click to expand...
Click to collapse
Plug the phone to the PC, be sure the phone is completely off and then hold power + vol- for a few seconds. You must see the "Moorefield" driver permanent in the device manager.
Btw... I got the same problem (four lines, not bootloader, not OS; xFSTK FW+OS failed) and I'm stuck in this step :/
mrperalta said:
Plug the phone to the PC, be sure the phone is completely off and then hold power + vol- for a few seconds. You must see the "Moorefield" driver permanent in the device manager.
Btw... I got the same problem (four lines, not bootloader, not OS; xFSTK FW+OS failed) and I'm stuck in this step :/
Click to expand...
Click to collapse
I've tried this many times, but it only shows Moorefield for a few seconds. I'm assuming this is because it has a fully operational OS so it doesn't stay in the generic USB device mode.
EDIT: I misread your original post. Holding power and volume DOWN does keep connect it in Moorefield. Thanks so much for that. The problem now is that once xFSTK gets to downloading the OS it reboots the phone which takes it out of USB mode and disconnects the tool. I'm still stuck where I was before, but that's a little progress. Any other thoughts?
New update. I'm able to get to the point of loading the OS from xFSTK by skipping the FW part, however it continuously fails. My assumption is because it can't overwrite the existing OS. Any other ideas?
kidnova said:
New update. I'm able to get to the point of loading the OS from xFSTK by skipping the FW part, however it continuously fails. My assumption is because it can't overwrite the existing OS. Any other ideas?
Click to expand...
Click to collapse
Kidnova, reading this post I could fixed my problem. The "issue" was in the xFSTK where you put the flag (0x800000807). A guy on the threat said to put "0x80000807" instead of "0x800000807" (note that there is "0" from difference).
"those who are not able to keep device connected. take care of few steps
1. in xFSTK option menu change the flag override value to 0x80000807 not 0x800000807 ( don't forget to click gp value over ride)
2. while connecting to xFSTK attach usb to computer. hold power button for 20 seconds to make sure it power downs completely. then hold the power button down and click power button. wait till device vibrate or computer makes detection sound. leave power button but keep holding the volume button for few seconds"
Click to expand...
Click to collapse
-sukhwant717
mrperalta said:
Kidnova, reading this post I could fixed my problem. The "issue" was in the xFSTK where you put the flag (0x800000807). A guy on the threat said to put "0x80000807" instead of "0x800000807" (note that there is "0" from difference).
-sukhwant717
Click to expand...
Click to collapse
You guys are lifesavers! I've got fast boot again. Now to see if I can continue without screwing it up.
FINAL EDIT: I have a 100% functional stock Zenfone 2. Thanks everybody for your help.
kidnova said:
You guys are lifesavers! I've got fast boot again. Now to see if I can continue without screwing it up.
FINAL EDIT: I have a 100% functional stock Zenfone 2. Thanks everybody for your help.
Click to expand...
Click to collapse
Hi, got the same issues, I've read many posts. Tried all of the million options. What was your final way of doing it, do you remember?
I have no idea how to root or anything like that, I bought this oneplus 3 and had a update a week later.. so when I did the software update it took me into teamwin recovery mode and now I don't know how to get back into my phone please help....
Did you buy the phone second hand or did you try to flash TWRP yourself? It shouldn't have TWRP installed by default.
Regardless, you can use TWRP to flash the latest update.
Given that you have TWRP, I'm assuming that you have an unlocked bootloader. Did you notice a warning pop up everytime you reboot your phone before? It should say something along the lines of "your device has been unlocked and can't be trusted". If not, you'll have to unlock it (it wipes your phone in the process).
If the bootloader is unlocked, you can simply download and flash the latest zip for OOS 4.0.3 in TWRP. This will update you phone and replace TWRP with the stock recovery (so you don't run into this problem again in the future when installing an OTA). If you don't intend to modify your phone in any way, then this is all you need to do, your phone should be functional.
There are plenty of threads with detailed guides on how to do all of this.
I'm also stuck on TWRP after stupidly downloading the latest OTA and I don't know what to do!
Phone won't boot normal, just goes off.
Situation:
- Bootloader, Fastboot and TWRP wil load.
- Device seen by windows
- Zip install in TWRP gets stuck at 'patching zip unconditiontally'
- Another zip flashes, but gets stuck at the end, no reboot option (manually but that's not the way)
Can someone please point me in the right direction? I don't care if I lose data, just want my phone back!
not helping:
Saying i'm a dipsh-t I know, I know, I will do better in the future, for now, help a brother out please
sndr1384 said:
I'm also stuck on TWRP after stupidly downloading the latest OTA and I don't know what to do!
Phone won't boot normal, just goes off.
Situation:
- Bootloader, Fastboot and TWRP wil load.
- Device seen by windows
- Zip install in TWRP gets stuck at 'patching zip unconditiontally'
- Another zip flashes, but gets stuck at the end, no reboot option (manually but that's not the way)
Can someone please point me in the right direction? I don't care if I lose data, just want my phone back!
not helping:
Saying i'm a dipsh-t I know, I know, I will do better in the future, for now, help a brother out please
Click to expand...
Click to collapse
Simple, check the OnePlus D/L sites for this one http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img and flash it by TWRP or fastboot to RECOVERY. Boot once with the official Recovery and all ist fine again.
This is issue of using a faulty twrp so for that when ur phone us booting up go to fastboot and flash twrp 3.0.4-1 and everything will work
emuandco said:
Simple, check the OnePlus D/L sites for this one http://oxygenos.oneplus.net.s3.amazonaws.com/recovery_op3.img and flash it by TWRP or fastboot to RECOVERY. Boot once with the official Recovery and all ist fine again.
Click to expand...
Click to collapse
Similar Problem here:
just wanted to flash latest OOS 4.0.3, so I flashed back stock recovery with flashify and rebooted into recovery mode to flash the already downloaded OOS 4.0.3. zip. That's when it began to go poop! After rebooting it just went dark with no Chance to power it on again! No dice with power button, Volume up/down + power button, nothing! Not even the LED's are blinking when plugged in. So this one seems to be basically dead!
I got it once booting again after randomly pushing the buttons (after x minutes!?), but everytime I reboot the phone it just shuts off without beeing able to power it on again. At the Moment it's dead!
Any ideas what might happened? If I get it on again, should I immediately reset it to factory Settings?
I am kinda lost here! Any help/ideas would be much appreciated!
Flashify? Never used it and never trusted apps which flash stuff on a running system. Use fastboot and reflash the recovery partition. Link to recovery is in my former post.
fastboot flash recovery PATHTOIMGFILE
Thank you for your advice! Still a lot to learn! Got it up again, will try as you suggested!
It appeared that my stock recovery file was corrupted , but all is fine again! Thank you very much!
Mannycolon85 said:
I have no idea how to root or anything like that, I bought this oneplus 3 and had a update a week later.. so when I did the software update it took me into teamwin recovery mode and now I don't know how to get back into my phone please help....
Click to expand...
Click to collapse
I may have been the person you traded with to get the OnePlus 3, but I took the phone back and after 5 hours I got it up and running.
The phone would boot to TWRP, but even after wiping the entire system and dragging a ROM zip to the internal storage, reinstalling did nothing. It just kept booting back to recovery.
The solution entailed the following.
Download stock recovery IMG. Flashed through TWRP. Rebooted recovery and now was back to stock recovery.
Download the official OxygenOS ROM zip from the OnePlus website and changed the name to update.zip
Next I downloaded Android studio for access to ADB. I had never used ADB before, but I knew this was needed to push a file to the phone.
Needless to say, ADB kept freezing my computer when I would type in the commands to side load.
I deleted Android studio and installed a minimal ADB/Fastboot I found online. I opened my command prompt, typed the command for sideloading, and immediately got my installation starting. It took about 10 minutes to fully install. When it was finished, I rebooted and had a fully functioning OnePlus 3
Sent from my ONEPLUS A3000 using Tapatalk
Hello, I tried to install the rom Google PixelROM v7.3 for LG Nexus 5X[7.1.2] by argraurand, and now my phone will no longer boot into TWRP or the OS. I am running TWR 3.0.2-0, I didn't see anything about having to have that updated to the most recent for using this rom. I was able to install the rom fine from this TWRP, but now my phone seems to be bricked like. Sitting with the phone in the bootloader, I can't get windows/fastboot/adb to recognize my device connected to my computer, the google drivers are definitely installed as earlier it was being recognized fine by windows/fastboot/adb. My bootloader changed with this ROM being installed, but now the TWRP won't load either, and neither will the Android OS (it looks like it's about to load then just defaults into the TWRP loading screen, which just sits forever). I can get also into the download mode "firmware update" tool of the phone by pressing the volume up when booting, but even in this mode the phone isn't being recognized in windows anymore. Do I have any chance of restoring my phone, or should I start shopping? I've fixed other phones many times, but without being able to load/restore via fastboot I feel totally lost.
myselfalex said:
Hello, I tried to install the rom Google PixelROM v7.3 for LG Nexus 5X[7.1.2] by argraurand, and now my phone will no longer boot into TWRP or the OS. I am running TWR 3.0.2-0, I didn't see anything about having to have that updated to the most recent for using this rom. I was able to install the rom fine from this TWRP, but now my phone seems to be bricked like. Sitting with the phone in the bootloader, I can't get windows/fastboot/adb to recognize my device connected to my computer, the google drivers are definitely installed as earlier it was being recognized fine by windows/fastboot/adb. My bootloader changed with this ROM being installed, but now the TWRP won't load either, and neither will the Android OS (it looks like it's about to load then just defaults into the TWRP loading screen, which just sits forever). I can get also into the download mode "firmware update" tool of the phone by pressing the volume up when booting, but even in this mode the phone isn't being recognized in windows anymore. Do I have any chance of restoring my phone, or should I start shopping? I've fixed other phones many times, but without being able to load/restore via fastboot I feel totally lost.
Click to expand...
Click to collapse
Try a different USB port. Maybe even a different pc. Fastboot tools was just updated. Make sure you have the latest one.
Maybe you can get a fastboot connection in Linux. Try this:
https://forum.xda-developers.com/showthread.php?t=3526755
Sent from my Nexus 5X using Tapatalk
Thank you both, I tried both another computer, and running this linux version with the fastboot built in, nada! Guess I'm shopping for a new phone. Pixel here I come. Thanks for the help agian.