Hi Xda,
I have a fake Lenovo S960c (didn't knew before i purchased it) , after i rooted it with kingo user cause there was a
malware which was located only by rooting . the malware was removed , but after few months the same type of
malware came again but this time there was two or three malware which was causing my battery to drain and i couldn't charge my phone battery to 100% . My Antivirus Showed my Mediatek file had a malware , i didnt know
so i uninstalled that file after my phone restarted it is caught in bootloop and won't go beyond the lenovo logo.
Please advise how can i slove this problem as i have been scammed when i bought this phone from Aliexpress,
thinking this was a real MTK6595 MODEL original Lenovo phone. I have written below my phone's real spec which i got using Mtk droid tools for your reference. please advise how can i fix my phone again.
Hardware: Mtk6572 (Mtk6595 is fake)
Model: S960c
Build Number : S5_JB3_3G_EMMC_QHD_32_4_XLD_Z12_LENO
Build Date : 20150417-064045
Andriod v: 4.4.3
Baseband: ____
Kernel v: 3.4.5([email protected])(gcc version 4.6x-google 20120106 (prerelease)(GCC)#1 SMP Fri Apr 17
18:02:31 CST 2015
Asking for help in the right section would be a first good step,
http://forum.xda-developers.com/android/help
:good:
Darth said:
Asking for help in the right section would be a first good step,
http://forum.xda-developers.com/android/help
:good:
Click to expand...
Click to collapse
Dear Darth
Can you please advise where should i post my thread in the help section which will help me aid my problem.
thanks in advance
Sufyan
sufyan nuhammad said:
Dear Darth
Can you please advise where should i post my thread in the help section which will help me aid my problem.
thanks in advance
Sufyan
Click to expand...
Click to collapse
You can start a new thread in the section I linked above, or post in this existing help thread,
http://forum.xda-developers.com/showthread.php?t=2259645
Related
Hi everyone
I used HTC Hero
Firmware 1.5
Baseband version 63.18.55.06EU_6.35.06.18
Kernal Version 2.6.27-44690c1a
Build number 2.73.707.9 146733 CL#62020
Software version 1.0.0.A6288
I've tried to use this solution http://theunlockr.com/2009/08/27/how-to-root-your-htc-hero-in-one-click/
and
http://forum.xda-developers.com/showpost.php?p=4257045&postcount=38
Any Suggestion?
You've not said what the problem/ error messages are. Nor how you know it's not rooted. I'm pretty sure for any of the dev's/guru's to be able to help you'd need to supply what's going wrong, not just the methods you've attempted.
ur problem like similar to mine
At present, I don't think anyone can help - see http://forum.xda-developers.com/showthread.php?t=563256
Regards,
Dave
Hi,
I am new for HTC G2 Touch, Can some one confirmed me like I am using Anroid 2.1 or not.
Firmware ver. : 1.5
Baseband version: 63.18.55.06FU_6.35.07.08
Kernel version : 2.6.27-0078c992 htc-kernel and 18-2 # 821
Build number : 2.73.110.26 CL#68351 release keys
software version: 1.0.0.A6288
Thanks......
> Firmware ver. : 1.5
Nope, you are using 1.5
EDIT: Also, this forum's for development. Post such questions in Q&A or general.
Sorry, further I will use Q&A or general.
Only one question can some one help me how can I upgrade to anroid 2.1
Please......
SumitAggarwal said:
Sorry, further I will use Q&A or general.
Only one question can some one help me how can I upgrade to anroid 2.1
Please......
Click to expand...
Click to collapse
first you need to root your phone
go here: and read everything first before you start, follow the step by step guide: http://www.villainrom.co.uk/viewtopic.php?f=46&t=375
if in doubt, ask at general thread
Sorry once again......
I followed the following link and I got the error message while open the Fleshrec and click on the Backup recovery Image I got "Backup Failed Could not run command"
Please please help
SumitAggarwal said:
Sorry once again......
I followed the following link and I got the error message while open the Fleshrec and click on the Backup recovery Image I got "Backup Failed Could not run command"
Please please help
Click to expand...
Click to collapse
Sumit you will need to use the gold card procedure.Its mentioned in the same post you went through..
Hi guys,
i'm new in the smartphones world i searched but can't find an answer to my question.
I would like to install android on my P300 coz wm6.5 sucks or also wp7 che someone help me? Does someone know if exist a different Rom ecc?
Thanks
It IS possible, as the hardware is identical to the GeeksPhone One and the Highscreen Zeus. I did once have the GeeksPhone One ROM running on my P300, but Acer released an update that added a OS version check and now RUT just tells me the Android ROM is the wrong OS for the phone.
If you can get past that lock, you can install the GeeksPhone One ROM fine with RUT. I didn't bother investigating further as I had other things to do...
FloatingFatMan said:
It IS possible, as the hardware is identical to the GeeksPhone One and the Highscreen Zeus. I did once have the GeeksPhone One ROM running on my P300, but Acer released an update that added a OS version check and now RUT just tells me the Android ROM is the wrong OS for the phone.
If you can get past that lock, you can install the GeeksPhone One ROM fine with RUT. I didn't bother investigating further as I had other things to do...
Click to expand...
Click to collapse
Thank u man, i searched and i found this site that i can't post its a geeksphone wiki but dosent' help me so much.
Can i ask you a website with the guide please or can you help me?
byte37 said:
Thank u man, i searched and i found this site that i can't post its a geeksphone wiki but dosent' help me so much.
Can i ask you a website with the guide please or can you help me?
Click to expand...
Click to collapse
There is no guide, I never said there was. Sorry, I abandoned the P300 ages ago and brought a recent model Android native device.
All I said was that the device is the same hardware as the Geeksphone and the Highscreen devices, and that Android USED to install it before Acer set the security bit. You'll have to research yourself to see if anyone has bothered to crack it or not.
ok thanks man, iasked only because u said u had a p300 running android with that procedure
byte37 said:
ok thanks man, iasked only because u said u had a p300 running android with that procedure
Click to expand...
Click to collapse
I suggest you read my post again, then...
I did once have the GeeksPhone One ROM running on my P300, but Acer released an update that added a OS version check and now RUT just tells me the Android ROM is the wrong OS for the phone.
Click to expand...
Click to collapse
It is possible I have flashed my P300 and I m running 2.3.1 (Gingerbread) on it!
Can u tell us how you have done it?
Sorry for the late response! I promise do a full guide this weekend!
update guide
@DominicRa:
Just curious, did u manage to do a guide for the upgrade?
Thanx
I m trying to upload the guide but i m told that "To prevent spam to the forums, ALL new users are not permitted to post outside links in their messages. After approximately eight posts, you will be able to post outside links. Thanks for understanding!"
I m running Android 2.3.4 SuperAsop 8.0 Rom the best. I m done with the guide but need to do more post cause xda will only allow me to post web links after I post more than 8 posts. So be patient will upload soon!
Caution: Some users have been reporting black screen after flashing! We busy trying to sort out the problem. Do not flash until further notice!
hi>>>> fido i have just inslled it as u worte exactly and it installed ok but the screen is black black when i call my phone from anther phone its rings but screen is dtell black could u plz find some solutions coz am searching form at lest 6 hours and did't find any thing plz help >>
Hi!...that was not suppose to happen! please post what happened! step by step...did it boot into Android after flashing or was the screen just black after flashing....please post everything so that i can help you.
ZeZoxx! Because I m on South African +2 Harare time zone, I may be available at odd times but if you tell me your time zone and mail me at xdasms(at)mtnloaded. co. za (do erase the spaces)...the email will send me an sms and I will log on to XDA and help you.
Caution: Some users have been reporting black screen after flashing! We busy trying to sort out the problem. Do not flash until further notice!
Did't see second page, sorry
DominicRa said:
H
Click to expand...
Click to collapse
Hey man i didnt see you responded to my post btw i'm from SA too, but i live in Italy :S ....
Btw i tryied to flash some months ago and i failed now my cell dosent switch on, it dosent even show acer logo... dunno what to do... can u help me?
Come on Guys. We need a fix. My Acer P300 won't even work now. It doesn't turn on and doesn't even seem to charge. The only light that is on when i plug in the charger is the end call light which is solid white. Any help is very welcome. Cheers
Olla amigos
So this is my phone and I would appreciate your help to find or to get a way for a root...
MODEL: HUAWEI-U8850
AND.v.: 2.3.7
BB v.: PR2
Kernel: Apps_2.6.32.9-perf
BUILD No.: U8850 V100R001C279B244SP22
Thats all folks! Thanks for every post or idea you provide.
Me Too
no1 ;-(((
Sent from my HUAWEI-U8850 using xda premium
torq1337 said:
no1 ;-(((
Sent from my HUAWEI-U8850 using xda premium
Click to expand...
Click to collapse
Plz. help me also i want to root my U8850 . how can i do ?
Thx.
Me Too
Me too,
I've tried SuperOneClick, DooMLorDs Zergling ... But nothing works. I might despair.
I hope someday a developer can somehow help us.
good vision mate
http://www.unlockroot.com/unlockroot.php
You can find your device which is HUAWEI-U8850 on 2.3.5
:highfive:
Thanks for reply but like I said in my first post... and v. 2.3.7
Count me in :/
Is there a way how to downgrade my u8850? Living on stock ROM without root is just pain in the ass
Ej m8! Do not try to downgrade it cause I did it when I bought him and of course... he died But the warranty was nice to me and they get me a new one... Cause it broke just 1 day after I bought him
Damn it guyz, nobody wants to help USSS !!!!!! ;( ;( ;(
torq1337 said:
Olla amigos
So this is my phone and I would appreciate your help to find or to get a way for a root...
MODEL: HUAWEI-U8850
AND.v.: 2.3.7
BB v.: PR2
Kernel: Apps_2.6.32.9-perf
BUILD No.: U8850 V100R001C279B244SP22
Thats all folks! Thanks for every post or idea you provide.
Click to expand...
Click to collapse
try Gingerbreak this is made for GB phones or download firmwares here
root 2.3.7
Hi all. Immediately apologize for my English.
root for firmware 2.3.7 were obtained, but firmware russian language
i am a new user and i can not post link fjr manual and firmware
Griefnorth, can you send me it on private, please ???? thx in adviceeee
torq1337 said:
Griefnorth, can you send me it on private, please ???? thx in adviceeee
Click to expand...
Click to collapse
pls let me know if you have root your huawei vision... thanks..
All, please write me to icq 2five381zero98seven and i set you root firmware, i can't post link in this forum
Send link on private
write me if you can't download
GriefNorth said:
All, please write me to icq 2five381zero98seven and i set you root firmware, i can't post link in this forum
Send link on private
write me if you can't download
Click to expand...
Click to collapse
Downloaded... installed over SUTLR, Succesfully installed but wont boot into it, just seeing the HUAWEI logo...
?!?!?!?!? any idea ?!
If you're still looking, try this:
http://forum.xda-developers.com/showthread.php?p=32428441
I *think* it's based on the same procedure as GriefNorth (hard to tell since the forum I got this from is Russian, but well yeah, it is Russian as well). But I've taken a Slovenian firmware instead of a Russian one.
I wasn't able to unlock the bootloader though.
i have the same problem. after i rooted i messed up the boot animation ,and after i reboot it won`t turn off even with the power button pressed, just stuck on the logo.i can`t go in download mode just reset with volume + and power pressed 10 seconds.after the battery was depleted i connected the charger boot up in download mode,and i applied a firmware from sd card but it gave me an error, see the attached log.i cannot remove the battery since it`s a unibody.any suggestion on what rom or procedure ?thanks
Can anyone tell me how to get my Vison out of DLOAD mode ????
I'v readied and consult every kind of thread before starting this one.
It runs on gingerbread 2.3.5
baseband
MAUI.11AMD.W11.37.SP.V6.P2
kernel
2.6.35.7
build number
11HX5W_PLUSPRO_120702_AD23W1145_V04_COM_EN
I'v flashed a lot of recovery images but they don't run.
Please, does anybody know were to find those files
Thank's to anyone! :fingers-crossed:
Files
nethysa said:
I'v readied and consult every kind of thread before starting this one.
It runs on gingerbread 2.3.5
baseband
MAUI.11AMD.W11.37.SP.V6.P2
kernel
2.6.35.7
build number
11HX5W_PLUSPRO_120702_AD23W1145_V04_COM_EN
I'v flashed a lot of recovery images but they don't run.
Please, does anybody know were to find those files
Thank's to anyone! :fingers-crossed:
Click to expand...
Click to collapse
Check out this thread:
http://forum.xda-developers.com/showthread.php?p=29115212
email me at [email protected]
email me at [email protected]
__
nethysa said:
I'v readied and consult every kind of thread before starting this one.
It runs on gingerbread 2.3.5
baseband
MAUI.11AMD.W11.37.SP.V6.P2
kernel
2.6.35.7
build number
11HX5W_PLUSPRO_120702_AD23W1145_V04_COM_EN
I'v flashed a lot of recovery images but they don't run.
Please, does anybody know were to find those files
Thank's to anyone! :fingers-crossed:
Click to expand...
Click to collapse
Hi,
Do you have any update about this issue? I've got the same problem, I need to unlock the same phone as you. Did you find the files?
Thanks :fingers-crossed: